Response speed - USB external hard drive

Similar Questions

• 250 GB USB external hard drive is compatible with Mac OS x on an iBook G4?

  Hello

  I just bought a Toshiba 250 GB Usb external hard drive because the seller advised me telling me that it works in my iBook G4 Mac OSX computer.

  I made it and I see it on my desktop with a folder called System Volume Information and 2.32 GB available.

  I tried to copy a file and I got a message saying that the disk is not editable.

  Where can I find the instructions to initialize if it's compatible?

  Thanks in advance,

  Joan

  Post edited by: jinglada

  Post edited by: jinglada

  Hello

  I'm not sure on this subject, but maybe you have to format it.
  Are there issues listed in the Device Manager?

  Good bye

• Satellite 1800-712 does not recognize my USB external HARD drive

  Hello

  I would really appreciate the help. I own a satellite 1800-712. I have receently bought a usb external hard drive for some extra memory (IE Toshiba MK4026GAX USB Device)

  When I connect it to my usb port it records any with the computer. The green light so there is power to the hard drive. The usb ports recognized of other fine features (a modem and memory stick)

  I tried the external hard drive on a desktop pc and it works fine.

  I have downloaded all windows xp service pack updates and updated my bios. Don't know what to do now.

  Please help and thank you in advance!

  Hello

  Although sometimes, I know that the OS is not able to recognize the external USB device, because the device external USB (HDD) consumes more energy than the 500mA.
  The USB ports provide 500mA power and if the device needs more power so it s is not possible for the Windows operating system to recognize the external device.
  You have an external power supply for the USB HDD? You should use it.

  Good bye

• Seagate FreeAgent GoFlex USB external hard drive problem

  I have a Seagate USB external hard drive. It is loaded with all my pictures and music. I can not open. I did in the past without problem.  It is a Seagate FreeAgent GoFlex. It says that I have the drivers updated. I've started and restarted. uninstalled and installed etc. It's also almost if there is nothing on the disc. When I plug it into the USB port it will not appear in the my computer tab, however, it shows in the toolbar at the bottom as installed but with nothing on it. When I run the troubleshooter, it says that the problem can not be detected, but it also says that the device is functioning properly. I do not know because I can not the specifics to fill. Y at - it somewhere that I can take this drive to see if someone can see if my files are always about this and that so they can transfer to another drive? Help, please!

  [Moved from comments]

  Hi Philippe,.

  Welcome to the Microsoft Community and thank you for the post about it

  It seems that when you connect an external hard drive Seagate USB to your computer, there is no indication in the drive. I appreciate the action that you tried to solve the problem.

  I would like to know the following information.

  (1) what version of Windows is currently installed on your computer?
  (2) have you tried to connect the hard drive to other USB ports?
  (3) you are able to use other USB devices?

  I suggest you to connect the hard drive to another computer and check.

  Your answers are important to us, please write to us with the requested information so that we can help more.

• Computer laptop (Vista) does not take account any new working USB external hard drive

  Hello, I'm under the latest version of Windows Vista Edition Home Premium on a Dell XPS M1210 and spin in the problems with the connection of my second USB external hard drive. In other words, when I plug the drive (a Seagate expansion 1 TB), nothing happens. Literally nothing, no notification of installation of the driver, no sound is played stating that the system recognized the device, no new entry in post working or disk management. I connected this drive on another computer running Windows 7 and it worked without a problem, so I do not suspect the problem to lie in the hard drive, but with my computer. My other external hard drive USB, a Maxtor Basics Portable 250 GB, works perfectly, but there more than two years. I bought the 1 TB Seagate as a backup and an upgrade, but I plan to go back now that there is nothing more than a big black Clipboard with a green LED clear too much room. What can I do about it?

  Hello
   
  Most likely, there is not enough power for the USB port of your machine to the external device do recognize. As a test I would have you test the issue on another USB plug.
   
  I recommend you contact you either OEM (Original Equipment Manufacturer) or the manufacturer of the motherboard if it is a machine of casting House and get the latest chipset drivers for your motherboard.
   
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Aziz Nadeem - Microsoft technical support.

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Cannot access 250 GB Toshiba USB external hard drive

  Hello

  I'm unable to access my 250 GB USB hard drive. It gives an error that it detects hardware & gives a pop for Cypress AT2LP RC58 driver & research updates on internet & then error is "cannot install the hardware, the hardware was not installed because the wizard did not find the necessary software."

  Any help will be much appreciated.
  Please let me know for any info.
  Thank you very much!!!
  Concerning
  Harish S

  Hello

  Seems that the external HARD disk drive cannot be recognized because of the driver problem.
  What you could do to disconnect the USB of ALL devices and open Device Manager.
  Then choose the display command, show hidden devices and uninstall all devices under USB controllers. Reboot the laptop.
  After restarting again the operating system must install USB drivers again and you could test whether the external HARD drive can be connected as well.

  I have goggled a bit and found a few interesting statement abut Cypress AT2LP RC58. It seems that the HARD drive is ok but sometimes the HARD drive cover and the interface connector would be malfunctions and so this problem would happen.

  But these are only suggestions if you want to try for Cypress AT2LP RC58 goggle and see for yourself.

  Best regards

• Windows 8 and USB external hard drives

  I want a new dv7 with Windows 8 and an Iomega Prestige 1 TB external hard drive I use successfully on Windows XP, Windows Vista and Windows 7 systems. It behaves erratically in Windows 8. Sometimes it is not recognized at all. Sometimes it is, but trying to access it via Explorer, Windows crashes requiring a diet forced down. Other times, you can access it with success and even copy a file to it with Solution Explorer, but if you try to copy multiple files with the same drag and drop, it displays the calculation time to copy file window, but the calculation done so forever, just stays there. Also, when you try an Xcopy in the prompt with mutiple files and / or files, copy the first file he is suspended from the command window. The system has a newly updated BIOS and all installed Windows updates. Ideas?

  Tried moving the Iomega for a USB 3.0 drive (the drive is 3.0 and 2.0 compatible) 2.0 in Windows 8 port and it now works fine. No idea whether the problem with USB 3.0 with Windows 8, HP or Iomega.

• Satellite L300-110 USB external hard drive is no longer detected

  I used my external hard drive via a USB connection for a while normally, I wanted to remove most of his files and only keep my important files. After I restarted my laptop it now is no longer detected

  My external hard drive model is HTS54101 0G9SA00
  Connected via a storage drive HARD Portable USB 2.0 Phillips

  The USB ports are ok, I plugged a USB optical mouse through them and it works, and sometimes the LED on the Phillips turns red with still no detection of my laptop.

  Please advise, I lost my mobile hard disk of 100 gega?

  Sounds like the hard drive has failed.

  The only thing I can think that you can try is to update your Chipset drivers. I don't know if this will fix the problem even if, as you have pointed out that the machine can detect other USB devices already.

• HP Pavilion 15 laptop: Need help, PC laptop HP Pavilion 15 could not boot from USB external hard drive.

  My desktop HP Pavilion P7-1074 4.5 years computer dropped last week. Planed to get a replacement on Black Friday or the day after Christmas. But I have to run some programs inside hard drve to the desktop computer. So I have attatched hard disk dive from my desktop to my laptop HP Pavilion 15 USB port with an enclosure.

  The laptop would recognize the external hard drive as a SYSTEM (F 62.2 MB of free space of 97.9 MB, OS (GTB-free 1.11 of 1.35 TB and HP_RECOVERY (H 1.33 GB free of 11.0 GB.))) But I couldn't find the program I want to run.

  I went into the BIOS to set the boot order to boot from USB first, but I could not get the result I expected. The laptop still start on its own hard drive. I tried all three USB ports, no one works.

  Could someone help me please?

  Thank you very much!

  Hi @db69613,

  Welcome to the HP forums! It's a great way to engage, ask questions and find resolutions by working with specialists from the community of HP. I understand that you need assistance with your desktop computer HARD drive that is connected to your laptop via the USB port. I'll be happy to help you with this.

  I'm just surprised at the levels of technical knowledge and technical skills that your possession. Hats off to you for this. It was very clever of you! It has been a privilege to have shared this platform with you and work with you.

  First of all, programs of a different version or windows session will not work on another computer as it was installed on the computer of origin at this time. It is an installation and application software, to the difference of the data or information that is accessible by any computer when the hard drive is connected. It is because no software installation binds the application of this specific operating system installed on this specific to the time machine.

  If the computer does not and the hard drive is accessible, all the content (such as music, photos, videos, and other information are accessible), but the programs have been installed originally are not available and will not work on any other computer when it is connected to the outside.

  However, if the hard drive works fine, windows is correctly installed, then the same hard disk can be installed on another PC of office and some of the programs should work ideally.

  I hope this helps! Please let me know how it goes. I really hope that the issue is fixed without hassle.

  To simply say thank you, please click the "Thumbs Up" button for appreciate my efforts. If it helps, please mark this as "'Solution Accepted". " If you need more assistance let me know and I will gladly do whatever I can to help.

  Please take care now and have a wonderful week ahead.

• 5OO GIG undetected USB external HARD drive

  Original title: 5OO GIG EXTERNAL HARD drive USB device

  System is unable to load the external hard drive.  The hard drive lights to indicate power, but the system does not show the joining, so I can't load anything on it.  Any ideas?

  Hello

  -The problem occurs on all USB devices and ports?
  -Don't you make changes to your computer, after which the issue started?
  -What operating system is installed on your computer?

  I recommend you follow the steps in these links that talk of a similar question.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/USB-hubs-not-recognized-in-Windows-7/2147865a-6e2f-46a0-b996-2999aabe9ab6
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/external-drive-is-not-recognized-in-Windows-7/3461b4fd-8e6b-44b2-8c73-aba682a4275e

• USB external hard drive stopped working

  I use Vista Home Basic Edition on a Dell Inspiron 1525.  I use a WD external hard drive for storage (almost a year) and it has been fine until today.  All of a sudden he disappeared.  At microsoft I used the fix tool and it said: relocation that the driver can solve - I say yes - device driver comes up saying installed successfully - but the disc puts to work continuously until I have unplug the USB or turn off.  Then everything went again.  I tried a dozen times, but it's always the same.  The only new thing that was installed today was a color laser printer & I don't see why that would stop the hd.  Any help or thoughts would be greatly appreciated as I need my data!

  Hello KBS406,

  Have you tried using a different USB Port? It maybe your H.D. must be assigned a letter given that your printer may have replaced it, itself when you install.     How to change a drive letter: to change an existing drive letter on a drive, on a partition, or a volume, follow these steps:

  1. Sign in as an administrator or as a member of the Administrators group.
  2. Click Start, click Control Panel, and then click performance and Maintenance.
  3. Click Administrative Tools, double-click computer management, and then click disk management in the left pane.
  4. Right click on the drive, the partition, the logical drive or volume that you want to assign a drive letter to and then click change drive letter and paths.
  5. Click change.
  6. Click assign the following drive letter if it is not already selected, click the drive letter that you want to use, and then click OK.
  7. Click Yes when you are prompted to confirm the drive letter change.

  The letter of the drive, partition, or volume that you specified is changed, and the new drive letter is displayed in the appropriate drive, partition, or volume in the disk management tool.

  Hope this helps you. Let us know anyway. Make it a great day!

  "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• USB external hard drive recognition problem

  I recently copied a large number of music files FLAC from a NAS drive to an external hard drive. When I plug the hard drive into the USB port on my computer, it is not recognized or appear in the screen 'computer '. Instead, I have an icon in taskbar icon (bottom right of the screen) and when I fly over it says "safely remove hardware and eject the media.

  Please, what this mean and is there a problem with my external hard drive

  Thank you very much

  John

  Start the disk with the connected player manager.

  In the lower panel, check disks and look at the left panel. It must indicate the status of the disc attached. If shown as a foreigner do a right click and "import foreign disks".

  This does not affect the data on the disk and not the alternative option of having to write a signature to the disk. You may also define a drive letter in the right side, until a drive has a letter, you can't see its contents.

• Using a Mac to partition a USB external hard drive to use to start Windows 7 on a PC

  Hello

  My PC hard drive died recently, and I need to reinstall Windows 7. Fortunately, I have a Windows 7 .iso file on my Macbook Pro. I also have an external hard drive USB empty. I try to use the Mac (in particular the disk utility program) partition this hard drive and load the .iso file in it, with the intention to start the system and install Windows 7 on my PC. (NB. I have a new internal hard drive which I intend to install Windows on to, but it's something that I should be able to handle later and should not be relevant at the moment.)

  As my DVD player also decided to break (I had not used for a long time), I can't burn the .iso to disk image file and start that way.

  So my question is, what is actually in all possible ways to use my WD 500 GB external hard drive to boot Windows 7 from USB? If so, is it possible to configure the hard disk with the .iso image file using a mac? I think I need somehow do "bootable" my hard drive to boot from it, but I don't know how to do this using a mac, so that it will be compatible for Windows startup.

  I've had this problem for days now and nothing I try seems to work - I tried what seems like all combinations of formatting, partitioning, extracting, BIOS-set-up-ing and file-system-change I can think of. Any help will be really appreciated. Also, if you need information such as specifications, just let me know and I will try to provide all the details I can.

  In addition, I understand that there a lot of messages on the boot from external hard drives, but I looked carefully and found nothing for my situation (more precisely using a mac).

  Thanks in advance for help; If all goes well there is something obvious that I'm missing that I can fix it easily.

  Hi Michael,

  Thanks for posting your query in Microsoft Community.

  From your problem description, I understand you want to make bootable Windows 7 disk using Mac computer.

  About a tool to burn an iso image on Mac, I suggest you contact apple support.

  https://discussions.Apple.com/community/desktop_computers

  However, as a solution, I suggest to go to one of your friend who has the operating system windows download Windows 7 USB/DVD download tool and burn the iso image.

  Detailed suggestions are mentioned in the following article:

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  I hope this helps. If the problem persists or all linked windows queries or issues related to the Windows operating system, please get back to us. We are here to help you.

• USB (external hard drive) device no power down / off when safely removed in Windows 7

  Well, I asked this question and no one seems to respond, I also found that many people want to solve this problem so here, it's once again

  Whne you have a hard drive that is not a switch on/off button that you who wait when you remove safely from the windows, he stops, so you shouldn't have to disconnect form the usb slot to do.
  And it happens in WIndows XP, but it is NOT in Windows 7 (or that I read, in Vista as well).

  I want to know, because it bothers me really, what is the solution?

  What I want is, after I click on "remove" my external hard drive, that what he would have turned off (standby) as it does in Windows XP!

  Help please.

  Hi gala,.

  Thank you for visiting the community Microsoft Windows 7.  The feature remove the device safely does not power supplied to a USB device in Windows. By design, the port to which the device is attached is not interrupted in Windows when the unit is softer.

  Please let us know if this helped.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Best practices to eliminate the USB external hard drives

  Hello

  I wonder what is the best way to disconnect an external hard drive to USB powered.

  The first thing to do is of course, use the "safely remove hardware and eject Media" next to the clock.

  But, after that do you unplug the power or USB cord first?

  The reason why I ask, is that I noticed the following error in the system event log:

  Log name: System
  Source: disk
  Date: 05/06/2013-08:27:46
  Event ID: 11
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: SERVER.xyz.intranet
  Description:
  The driver has detected an error of the controller on \Device\Harddisk1\DR7.
  The event XML:
  
   
     
      11
      2
      0
      0 x 80000000000000
     
      215889
      System
      SERVER.xyz.intranet
     
   
   
      \Device\Harddisk1\DR7
      0E04800001000000000000000B0004C003010000000000000000000000082D00000000000000000057CFCF0100000000FFFFFFFF060000005800000000000000FF0006120C000010000000003C000000000000000000000000C2431080FAFFFF0000000000000000607A2D2180FAFFFF0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
   
  

  I have run chkdsk on the drive and everything seems fine.

  Thank you

  Hi Simon,.

  I suggest you to disconnect the power cord and then remove the USB cable.

  For more help with the ID:9 of the event, see the following link:
  How to troubleshoot the error messages about event ID 9 and event ID 11
  http://support.Microsoft.com/kb/314093
  Note: Suggestions in the article above also applies to Windows 7.

  If you have any other questions, answer here and we will be happy to help you.