Restart a session of planning tool instead of the operator

Similar Questions

• El capitan update fails to restart except in safe mode. can I recover the operating system in safe mode?

  ElCapitan updated (from apple update) fails to complete restart, except in safe mode. How can I recover or reinstall the OS of a restart to safe mode?

  Boot into Recovery (R command) and run disk utility > first aid on your MacintoshHD

  You can always reinstall the os x from here, if necessary

  OS X: on OS X Recovery - Apple Support

• 4EA3 monitor Sessions explain plan fails with ORA - 00904 SP. CHILD_ADDRESS is not a valid identifier.

  I'm running 64 Bit Windows JDK 7 connecting to Oracle DB 10.1.0.5.0. Access the Plan to explain in the tool monitor Sessions tab causes the error. This has been true in all 4. releases.

  Copy of the report of sessions monitor down to a user defined report, check out the SQL used in the Plan to explain tab and try to run in your 10.1.0.5 database. We do not support this version of the database, but you can change to the sql in your report defined by the user to work for this instance if necessary.

• Failed to open a session in planning and working space.

  Hello
  
  There is a problem of gravity and users could not connect in planning and working space. They can see the log on screen, and after you enter the credentials, it freezes. We use 11.1.1.3 planning on Windows 2003 and Weblogic.
  
  I found this in my journal of planning:
  
  < 27 April 2010 10:36:58 AM PDT > < error > < HTTP > < BEA-101020 > < [weblogic.servlet.internal.WebAppServletContext@2be829 - appName: "HyperionPlanning", name: "HyperionPlanning", context path: ' / HyperionPlanning'] Servlet failed with Exception
  com.hyperion.planning.NotLoggedInException: cannot find the session: 607298330
  at com.hyperion.planning.db.HspStateMgrImpl.getSession (unknown Source)
  at com.hyperion.planning.db.HspStateMgrImpl.verify (unknown Source)
  at com.hyperion.planning.db.HspPrefDBImpl.getToolsLinksVector (unknown Source)
  at com.hyperion.planning.HyperionPlanningBean.getToolsLinksForCurrentUser (unknown Source)
  at jsp_servlet.__selectform._jspService(__selectform.java:1617)
  Truncated. check the log file full stacktrace
  
  Please suggest.
  
  Thank you

  Restarting services is always a good starting point.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How do I view his homepage instead of the previous session of Firefox?

  Hello

  I'm having a little trouble because when I close Firefox and reopen it, instead of the blank page, I put to show you me, show me my previous session. I shot all my addons and it has started in Mode safe, but it still does the same thing.

  I checked all the settings I can find, but nothing works. I have the latest version of Firefox.

  Any suggestions?

  One of my addons is the session manager but disabled, Firefox does the same thing.

  Thanks in advance

  Niels

  You can check if you have a user.js file in the Firefox profile folder that affects the pref browser.sessionstore.resume_session_once true value.

  • http://KB.mozillazine.org/browser.sessionstore.resume_session_once

  You can remove the user.js file.

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  Windows hides certain default file extensions.
  Among them are .html, .ini and .js, .txt, so you can see only file name without the file extension.
  You can see the type of actual file (file extension) in the properties of the file via the context menu in Windows Explorer.

• When I try to use the Snipping Tool I get a message saying that "the capture tool doesn't on your computer right now. Restart your computer and try again. If the problem persists, contact your system administer. "__What I can do to fix this? __Thanks

  When I try to use the Snipping Tool I get a message saying that "the capture tool doesn't on your computer right now. Restart your computer and try again. If the problem persists, contact your system administer. »
  What can I do to fix this?
  Thank you

  Hi Palaimo,

  See if one of the patches in the following link works for you.

  Snipping Tool fails

  Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• ... Can work plan tool I get rid of him?

  I'm a guy who uses keyboard shortcuts to get to all my tools. Now whenever I hit him 'v' to access the move tool, I get the new tool of the artboard (and without realizing it, I do something on the document which I don't do). Of course, I can hit 'v' to access the desired tool, but it's a chore.

  Can I just get this tool to work plan out of the rotation of hotkey somehow?

  Go to Edition > shortcuts... and you can change the content of your heart keybinds!

• Recommendation of the capacity planning tool

  Anyone have any suggestions about a good capacity planning tool?  Aware and some exposed to the CapacityIQ and vKernel and reflected on the operations of vCenter.  Someone at - it experience with VMTurbo or SolarWinds?  Thank you

  I would also like some the best analytics that I saw in the treatment of pre-virtualization capacity planning through immune in the mix - as long as the ongoing capacity management.

• get the selection instead of the puppet pin tool marquee tool

  I imported a png file in the new composition and wanted to distort the image with the puppet tool, but instead of the puppet pin tool that I always get the marquee tool

  tried to keep Alt, Shift, Ctrl, did not help

  puppet pin tool works fine on the other compositions. It's the first time I encounter such a problem with the puppet tool. What is going on?

  AE CS6 on win7

  First question, what size is this file? I don't see any dimension.

  Second question, it is necessary to have layers in this picture? Looks like you apply puppet pin on the entire fly.

  Third question, have you tried to reduce the size of the file in Photoshop to about the size of your computer and then saving it as a png 24-bit or single-layer PSD or tiff with an alpha channel?

  It is difficult to know because there is no detail about right PSD, but it could be wrong, too much color space, or have another problem that I don't see.

• Execution plan will change if I use the variable binding instead of the literal value?

  Hi guys,.
  
  Suppose I have a select "... Of... WHERE ID = 2 and... "if I go to use the variable binding instead of the literal value 2," SELECT... " Of... WHERE ID =: p_id and... ", the execution plan change?
  I test multiple statements, the plan does not change, but I don't know if it would even as well as in some other cases.
  Someone at - it ideas?
  
  Thank you very much.

  Anneso wrote:
  Hi, sorry for the unclear post, it's 11 GR 2.

  As Sybrand already mentioned, there are a lot of change that came in the implementation of the bind variable in some versions of Oracle db. Since you're on 112, it is still true with the introduction of Adaptive Cursor Sharing . Please have a read on it since the post below written by the development of Oracle optimizer group.
  http://blogs.Oracle.com/optimizer/entry/why_are_there_more_cursors_in_11g_for_my_query_containing_bind_variables_1

  Aman...

• ESC of Type instead of the Selection tool, direct selection tool

  After you have changed the type with the text tool, is there a way to set Illustrator for the direct instead of the selection tool Select tool when you press the Escape key?

  On mac, it use to be command-tab to switch to the other tool selection and back after you access current selection tool while in one different tool other then the selection tool as the pen tool do you now turn back on first press and hold the command key down if the selection tool and you want the direct Selection tool to hold the option tab keys as well as the command key that is then to select the direct Selection tool, the direct Selection tool will be available whenever you hold down the control key if you want to come back and do the same thing.

  They are a weird combination of keys, but there you go.

• ThinkCentre M83 ist perform the restart (reboot) instead of the stop

  Hello

  I have 10AJ001RMZ Thinkcentre M83 with Windows 7 PRO 64 bit and installed latest BIOS and can not stop.
  If I press the Windows shut down, the VBI making every time reboot (reboot) instead of the stop.

  I disabled WOL in the BIOS, but it does not help.
  Knows anoyone howto to solve this problem?

  Sorry, the BIOS has not been more recent.

  I installed FBKTB9A (27/11/2015) earlier, disabled WOL and now it seems to work.

• The mouse cursor changes to hand instead of the text tool when I hover over the text.

  Normally whenever I have fly over the text in an e-mail or on the web, in order to highlight to copy and paste, the mouse cursor becomes a text tool.  However, now every time I have fly over the text, it remains on the hand tool.  Whenever I click on the mouse button, there just cause the hand to shake.  I can then move the page and everything I want to get off.  The only problem is, I want to highlight the text with the text tool, not handle the page with the hand.  My question is how to change the mouse cursor to get the text tool when it flies over text?

  Normally whenever I have fly over the text in an e-mail or on the web, in order to highlight to copy and paste, the mouse cursor becomes a text tool.  However, now every time I have fly over the text, it remains on the hand tool.  Whenever I click on the mouse button, there just cause the hand to shake.  I can then move the page and everything I want to get off.  The only problem is, I want to highlight the text with the text tool, not handle the page with the hand.  My question is how to change the mouse cursor to get the text tool when it flies over text?

  I wonder if this will help...
  Right-click on an open office space > Personalize > mouse pointers > pointers tab, click on use default > apply/OK

  t-4-2

• Plugin Tools disappear from the Quick Access toolbar after restart

  Under Acrobat DC so I start the program to icons of the 3rd party plugin which placed on the front quick access toolbar appear. First of all, I have to enter quick customization tools (and now the 3rd party plugin icons are there in the customization window), make any kind of change, save and close the customization window. After that, I can find icons all the 3rd party plugin in the toolbar access until the next reboot, but when I close and start Acrobat DC again, I have to redo the steps. I tried with Enfocus PitStop tools and quite imposing Plus. Enfocus external team to our PC support and they checked the registry, under HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\2015\AVGeneral\cFavoritesCommandsDesktop, they found tools of the Plugin, but they do not show the Acrobat.

  Hi molnarnyomda,

  I will recommend you to contact the creator Plugin support team to ensure that it is completely compatible with Acrobat DC. If not test compatibility more far.

  Kind regards
  Nicos

• Adobe Acrobat opens with the selection tool chosen, instead of the Pan tool

  Does anyone know how to change the settings such as acrobat automatically has the Pan tool selected when opening a document?

  Hi chrisp,.

  I got the chance to get the hand to 'paste' default tool by choosing the following preference settings:

  Document:

  • Select 'Restore last view settings... ". »

  General:

  • Select the options «Tool brand...» »

  Accessibility:

  • Uncheck the "always display the keyboard selection cursor.

  Please let us know how it goes.

  Best,

  Sara