Restart issues with the laptop Acer E5-511-P8C8

(Please note: this question below was posted by me on Windows 10 Insider site overview since May.) There is a problem from the last construction 10240. I haven't posted previously on this forum because I knew that Win10TP was of the beta software. and the Acer would probably not yet support. But now, we close out, so I thought it was time to see if everyone else feels the same way...)

I have a few questions.

1. what version of BIOS currently installed on your computer Acer E5-511-P8C8?

2. what version of BIOS Acer downloads are only the latest version for your computer?

3. When you have installed Windows10TP, where did you get your drivers?  Windows Update? Directly from the manufacturer of the component? Acer driver downloads or?

4. do you intend to re - install Windows 8.1, so you can get the 'regular' Windows 10 consumer version which will be released July 29?

5. If you are planning to get the regular version of Windows 10, be you re - install Windows8.1 get the version of regular consumers of 10 windows and then return to Windows Insider 10 versions?

6 have you ever used the 'GET WINDOWS 10' icon, to see what were the results of the analysis of the system for compatibility while using Windows 8.1?

http://us.Acer.com/AC/en/us/content/drivers

http://community.Acer.com/T5/Windows-10/welcome-to-the-Windows-10-Forum-start-here-first/m-p/366899#...

Tags: Acer Software

Similar Questions

  • Issue with the brightness Acer S7-392

    Hello, I just got my Acer Aspire S7-392-9890 to a week ago, and after solving the wifi have been loving it... Unfortunately, I'm having an odd number.

    When I connected computer and open the cover for her to wake up from his sleep he wakes up at full brightness of 100%, but if the power supply cord is removed or moved accidentally (which happens often) it will go to about 70% brightness to be on the power of the battery - well! But when I plug it in - waiting for it to go to its maximum intensity of 100% - he'll that up to 80% brightness in Windows 8 indicates that its 100% brightness.

    I have to close the lid to get the computer to go to sleep and open it upwards, to get to 100% brightness.

    It's a minor issue, but one I have never had a problem with MOST laptops I've owned in the past.

    It's a strange event, I expect it to go 100% of myself.  I will forward it for further investigation.

    However, you can disable a parameter and then you will have complete control over the brightness of the screen.

    • Go to settings

    • Change laptop settings

    • General

    • Screen

    • Disable "automatically set the brightness of my screen.

  • How can I get my ps 3.0 to install on my laptop? compatibility issues with the new version of windows

    How can I get my ps 3.0 to install on my laptop? compatibility issues with the new version of windows

    It is hopelessly outdated. It is simply not compatible.

    Mylenium

  • How to install the printer with the laptop. Printer was used with another computer.

    I wanted to use a printer with my laptop lexmark. The printer was used with another computer and it worked fine, but when I tried to use it with the laptop, I was not able find the installation disk and tried to install without it. The laptop produces a message indicating he could find the internet facility info if I accepted this. He had apparently fulfilled this function, and I tried to print a document. The document has been printed, but the result was so low, that it was not readable. I then found the installation disk and tried to restart but was confused by the messages and options. I don't have a printer that prints. Help.

    I wanted to use a printer with my laptop lexmark. The printer was used with another computer and it worked fine, but when I tried to use it with the laptop, I was not able find the installation disk and tried to install without it. The laptop produces a message indicating he could find the internet facility info if I accepted this. He had apparently fulfilled this function, and I tried to print a document. The document has been printed, but the result was so low, that it was not readable. I then found the installation disk and tried to restart but was confused by the messages and options. I don't have a printer that prints. Help.

    Unplug the printer from the laptop.  In Vista or Win 7, click Orb (Start), settings, Control Panel, printers. When the Lexmark printer is found, right-click on it and then click on remove.
     
    Equip your drive and install the drivers and programs on the disk, then when told the printer.  You should have a printer now works.
  • How can I restart firefox with the same tabs and windows?

    How can I restart firefox with the same tabs and windows?

    It is not in the file menu or tools. I get nothing when searching for help. FF still knows how to do it, say to update extensions.

    I know that I can do by saving my session, coming out, reboot and restore the session but is there a single command to do this?

    Thank you. -David

    I have attached a screenshot showing how to select restore automatic session just above the setting of the Home Page where it says "When Firefox starts".

    With this set, you can restart Firefox manually out using the menu-

    • "3-bar" menu button > button "power".
    • (menu bar) File > Exit

    -and then restart Firefox.

    If you want a real reboot with a click of button, you can check something on the Add-ons site: https://addons.mozilla.org/firefox/

  • problem of installing active sync 6.1 64-bit with active sync. you have a known issue with the compatibility. you have a work around where the way to get these two together?

    problem of installing active sync 6.1 64-bit with active sync.  you have a known issue with the compatibility. you have a work around where the way to get these two together?

    See: http://answers.microsoft.com/en-us/winphone/forum/wp6n-sync/microsoft-windows-mobile-device-center-61-driver/4cd26ba2-9583-47b7-b5e7-32b382cee0b2

  • I have a aspire 5253, power watch normal bright screen with the logo Acer and F2 set up

    I have a aspire 5253, power watch normal bright screen with the logo Acer and F2 put in place down, but only for a few seconds, then it goes very dark, almost impossible to see what is on the screen, but there is something.

    I connect a monitor to the VGA connector and th PC works fine.

    I've updated the drivers, but it shows always available, as the main screen attached to the was'nt PC he all of a single screen

    to detect not to bring, and isentified on ly show 1 on both screens, PC built in display still very dark, like the backlight is not on

    reboot always perfect watch on the screen for a few seconds then dark

    Thanks for help

    by chance, I moved the cable button / stop for the Office and the screen turned on

    I checked the cable, it was slightly broken by the brokrn hinge

    I just had to cable and now it works fine

  • I reinstalled XP Professional on the disc that came with the laptop. It is said that the activation code is incorrect.

    I inherited my mums old laptop. There were problems with it starting, so I reinstalled XP Professional on the disc that came with the laptop. He said that the activation code is incorrect. I ran the Microsoft Genuine Advantage Diagnostic Tool and ripped the report below. It seems that the activation code I have is correct, so can not understand why it won't work!

    Diagnostic report (1.9.0027.0):
    -----------------------------------------
    Validation of Windows data-->
    Release status: not activated
    Validation code: 1
    Code of Validation caching: n/a
    Windows product key: *-* - T6DFB - Y934T-YD4YT
    The Windows Product Key hash: 3g4CZGFEDgbKmn/oB4pa2FZsssU =
    Windows product ID: 55274-OEM-2211906-00102
    Windows product ID type: 2
    Windows license Type: OEM SLP
    The Windows OS version: 5.1.2600.2.00010100.3.0.pro
    ID: {AC5C185A-C24F-485D-981C-80689A11613E} (3)
    Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Product name: n/a
    Architecture: n/a
    Build lab: N/A
    TTS error: n/a
    Validation of diagnosis: 025D1FF3-230-1_025D1FF3-238-2_025D1FF3-258-3
    Resolution status: not activated

    Given Vista WgaER-->
    ThreatID (s): n/a
    Version: n/a

    Windows XP Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    File: No.
    Version: N/a, hr = 0 x 80070002
    WgaTray.exe signed by: n/a, hr = 0 x 80070002
    WgaLogon.dll signed by: n/a, hr = 0 x 80070002

    OGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002
    OGAExec.exe signed by: n/a, hr = 0 x 80070002
    OGAAddin.dll signed by: n/a, hr = 0 x 80070002

    OGA data-->
    Office status: 109 n/a
    OGA Version: N/a, 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Office Diagnostics: 025D1FF3-230-1_025D1FF3-238-2_025D1FF3-258-3

    Data browser-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default browser: C:\Program may Explorer\IEXPLORE.exe
    Download signed ActiveX controls: fast
    Download unsigned ActiveX controls: disabled
    Run ActiveX controls and plug-ins: allowed
    Initialize and script ActiveX controls not marked as safe: disabled
    Allow the Internet Explorer Webbrowser control scripts: disabled
    Active scripting: allowed
    Recognized ActiveX controls safe for scripting: allowed

    Analysis of file data-->

    Other data-->
    Office details: {AC5C185A-C24F-485D-981C-80689A11613E}1.9.0027.05.1.2600.2.00010100.3.0.prox 32*-*-*-*-YD4YT55274-OEM-2211906-001022S-1-5-21-1343024091-602162358-682003330DIXONSXP,DIXONSXPAmerican Megatrends Inc.. 080012 20051128000000.000000 + 000Dell, Dell Computer, Dell, Dell system system system891C39E70184C06C08090409GMT Standard Time(GMT+00:00)03109

    License data-->
    N/A

    Windows Activation Technologies-->
    N/A

    --> HWID data
    N/A

    Activation 1.0 data OEM-->
    BIOS string matches: Yes
    BIOS marker string: Group 1 B 430 stores: Dixons | 1AE0C:Elitegroup Computer Systems Co., Ltd.
    Marker of OEMBIOS string. DAT: Dell, Dell Computer, Dell, Dell system system system

    Activation 2.0 data OEM-->
    N/A

    Help, please!

    Your relocation was made of a set of recovery discs Dell - which uses a key to Dell and cannot be enabled on any other brand.

    It's a Dixons computer odf, then I suspec that the COA sticker on the case is for XP Home edition, while the installation is Pro.

    You need to return to this system to its licensed version of Windows by using the recovery media for that PC - or a good disc XP Home OEM System Builder.

  • I want to do a clean install of windows xp on a hp compaq nx6125 but do not all disks with the laptop but I still have the original windows sticker on the bottom.

    I need to reinstall xp on my nx6125

    I want to do a clean install of windows xp on a hp compaq nx6125 but do not all disks with the laptop but I still have the original windows sticker on the bottom. is this possible or do I have to buy another drive xp and sticker

    Hello

    Yes, you can use this COST to install Windows XP. However, you must have Windows XP.
     
    If you face any problem regarding the installation of Windows XP.
    You can contact our Windows activation service.
    Here is the link:
  • New hard drive mounted, didn't save lost all devices sony and Microsoft word. Still have the product that was supplied with the laptop key. Can I get this without having to buy new?

    VAIO laptop

    New hard drive mounted, didn't save lost all devices sony and Microsoft word. Still have the product that was supplied with the laptop key. Can I get this without having to buy new?

    To restore the software preinstalled on the computer, or to install disks:

    Contact the OEM computer manufacturer and ask them to send you an installation to your computer disk - they may charge a small fee. Contact information for the manufacturer of your computer can be found here:

    http://support.Microsoft.com/GP/oemphone/

    Sony support:
    http://eSupport.Sony.com/

  • Printers HP B110a cannot communicate with the laptop, but both will be connected to the router?

    OK, here's an interesting problem that has been banging my brain for hours, one of my friends has a HP Photosmart all in one printer B110a. Now I can get the printer to connect to the wireless router, no problem. Can I also have the phone to connect to the router, the problem is that the printer cannot communicate with the laptop. The router brand and model is the Linksys wrt54g

    Now, I took my friends laptop home and tried to see if she could detect my wireless printer model different on my router which is a TP WR340GD I went in devices and printers, and went to Add a printer and Add Printer wireless, it instantly detected my printer via the wireless network. There is no problem on the side of the laptop. I am sure that any firewall on the laptop was turned off when I tried the connected printer.

    So now I have my friends printer here with me and decided to try and see if I could detect the HP Photosmart printer All In One Printer on my laptop on my TP WR340GDwireless router. Yet once, it worked perfectly and it has detected the printer and works wireless without fault.

    I'm down now to the conclusion that the problem is with my friends router Linksys wrt54g I'm gone in the settings of the router, change the wireless channels, changed security between WEP and WPA/WPA2 and AES AND TKIP wireless and this does not solve the problem.

    I can access to the Photosmart B110a: the Web server integrated in a browser ONLY if I have the laptop to the router physically connected by Ethernet cable when trying to access my router from a friend, but I can access through wireless on my router. The problem is probably something very simple that I forgot, but I was more all I can think that I tried to reset harder than the printer cleaned the network settings on the printer as well from the display of the printer menu.

    I'm really lost now, someone at - it suggestions?

    Hey pcwizard, ok, I checked the router settings and Mac filtering turned on, so I decided to reset the router, it restored to factory settings. Re-Setup wireless and once again I tried, still had no luck with the laptop to communicate with the printer.

    in any case, I decided to connect the cable from the printer to the laptop and took the USB to wireless Assistant. As I reinstalled it the printer using the wired method.

    He told me that the rules of traffic incoming and outgoing firewall stopped communication between devices and assign port numbers 427-9000 etc.. However, I had turned off all firewall, Windows and Norton 360, which since then, I've replaced with a better anti-virus software.

    I went into the settings of the router, port forwarded the application numbers, tried again and is again no luck. I'm usually pretty good with computers, but it was really annoying me. So I went and had a coffee and a brainwave came and I decided to see if my laptop could detect and connect the printer to the router. As soon as I tried it, he finds and the printer has detected immediately.

    Then I thought there must be something on my laptop to friends who may be at the origin of the problem, when I looked, I noticed that my friend had the old software Vodafone Mobile Broadband running in the background which was connected to the router.

    So I closed and turn it off and tried again adding printer. SUCCESS now detects it and the printer is now communicate and respond with the laptop. I'm guessing that the Vodafone Mobile Broadband have a built-in firewall blocking the communication. However it is strange because it worked without problem on my printer at home, so I wonder if some how blacklisted broadband Vodafone IP address of the printer at a time on their router.

    I'm so happy, it's finally done, a lot of hours and work, and after all this time it was * beep * Vodafone.

    in any case Pcwizard I thank very much for trying to help, no doubt has given me a few ideas.

    Thanks again!

  • Problem with the laptop overheats.

    Hi all

    I am working on a DELL laptop. He even sends warm air by her orifices. I think that probably there are some (or large amount of) dust on hardware devices inside.
    I know that the best way is to open it and clean these parts by a compressor (for example), but there are two points here:
    1-do you agree that this hot air is due to dust and I need to solve this problem by the shears of cleaning equipment?
    2. I did not open any computer laptop ever, a little scared (because this laptop is not mine). You always tell me to do? If so, what are the rules I have to observe before, when and after you open the laptop?

    Thank you.

    You can sometimes get the lint and dirt outside blowing into the cooling in the other direction with the laptop turned off but it must be a blow hard. The short pulses with a can of airduster spray is more effective.

    Unfortunately, if it's really boilerplate it may not work and the fan removed to erase it. It's the ease varies depending on the model. There are many videos of portable Louise on utube certainly of a different quality. Unless you are 100% sure they can be a bit complicated because there are a of clips often hidden to save any screws holding together

  • How to recover windows 7 that came preloaded with the laptop

    Hello

    I have sony laptop. It comes with windows 7 Professional. But due to some errors on the very first or second day of purchase, it has been deleted. I took it to the sony store and they installed windows 7. But even once, because of some mistakes made by our children it has been deleted. And I installed windows xp home which came with the laptop. Subsequently, I installed windows 8 on the laptop.

    Now, please let me know how I can get a copy of my windows 7 Professional.

    Waiting for your kind answers.

    Rajneesh

    and...

    http://www.KB.Sony.com/selfservice/viewContent.do?externalId=C61643&sliceId=2&MDL

    Once your computer is fixed, you might want to consider doing a defined recovery disk.

    https://www.docs.Sony.com/release/VGNT300series_Recoveryguide.PDF

    Tom Ferguson

  • What will happen with my agent and active Windows 8, I will have bought with the laptop after I swap HDD with SSD?

    Original title: replacement disk and windows.

    Hello guys.

    I am considering buying a new laptop. The model that I found and I like has a HARD drive if I want to replace it with the SSD to the format of my previous laptop. (Due to the low energy consumption, greater speed, etc.). So I have a 256 gb SSD in my previous loan of laptop replace new one HARD disk, yet what will happen with my agent and active Windows 8, I will have bought with the laptop?

    I can reinstall windows 8 on the SSD, but I don't have a key to activate their... How will I be able to get the key from previous series if the laptops will only work with a recovery partition these days here? I asked a guy in the store, I buy my laptop since and he told me that he does not know and I have to ask for help. However, to create a message of support I need a serial number of the model I did not because I have not yet bought a laptop, so I don't know what to do... I really don't want to stick with the HARD drive, but also I can't afford another model.

    Is it possible to do a recovery with my laptop disk when I get it, then replace the drive with my SSD and run the recovery disc I made?

    The laptop I want to buy is an Asus if that helps...

    Thanks in advance...

    The 'Raw' State is not necessary, it is the State of any drive (SSD drive or hard drive) would be in if you just remove a disk new in box and will need to be "initialized", since you have already used the player already initialized sound.

    Do not format the drive, rather than delete all existing partitions, (the SSD shows then as being "unallocated"). Now you are ready to restore the backup Image you created. During the restore process Acronis will recreate the partitions that were on the hard drive on your SSD.

    J W Stuart: http://www.pagestart.com

  • Are there known issues with the help of Dreamweaver CS6 on Yosemite?

    Are there known issues with the help of Dreamweaver CS6 on Yosemite? I am considering an upgrade of the Mavericks.

    I don't think so I am still using DWCS4 on Yosemite and it runs like a dream, so I think that DWCS6 would be.

Maybe you are looking for