restart of the 260 on disconnect

I hope that's not a position to repeat, as I looked through a lot for my problem.  It's here.   I only got it a few days.  I have, it's like a refurb by Buy.com.  However I am sure it is a refurb is the problem.  The first day it was working fine.  I had my course in Spanish on readings, as well as some audio on Spanish.  It played fine.   I've updated the firmware, still all played fine.  So I decided to put on some Spanish videos.  At first I did wrong (not through Media Converter) Although it allowed me to transfer the data via my personal computer to the layout of the House.  I think that it is at this time all the lessons have become "unknown" and would play no longer.  Audio playback however still play.  I took videos, made through the media, and they worked, however the audio lessons do not always have.

In addition, every time that I log out of the comp in Msc mode the Player restarts itself.  In MTP mode that it experienced a problem whenever I tried to open the files when connected to the computer to restart.  My brother took some file out and that as collapsed.  One more thing, it is that, at some point, things began to be loaded automatically on.  These audio files has played, but were unclear.  This happened at the same time I first put on the videos.  So either could be the problem.  I did very much the 'Format' to try to reset everything back, but he is still reseting on disk in MSC, and Spanish courses as a first step, worked well, still does not work.

I wanted to add that the same files that are no longer on the e260, are still working on the c250.  Also when information began to be loaded automatically (those that were blurry) I stop them in the middle of transfer.  If it could have been the problem.  These are both version 1.

Thnx for any help.

Riley

Can run the command ChkDsk with the /f switch to see if you have corrupted files.

I wanted to add that the same files that are no longer on the e260, are still working on the c250. Also when information began to be loaded automatically (those that were blurry) I stop them in the middle of transfer. If it could have been the problem. These are both version 1.

Thnx for any help.

Riley

Tags: SanDisk Sansa

Similar Questions

  • Win2008R2 domain controllers; Restart the domain controllers disconnects the client

    * Original title: DC reboot causes disconnection of the clinets

    We have 2 controllers Doamin of Win2008R2. When a domain controller restarts, all the APs on some clients (Telnet, MSTSC ex...) Win7 will cut soon. There is no error/kingdoms fighters on the client event log. WinXP will never suffer.

    What can I do? Thank you.

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
    *
  • the host is disconnected and require restart to vcenter

    Get a problem for the host is disconnected and only a reboot of the host gets their return to vcenter.

    Is there an upgrade performed recently at 5.5.

    See you soon

    Petter

    Something goggle and beneath the article, suggest you give a try to this...

    VMware KB: Activation or deactivation of VAAI ATS heart rate

    Concerning

    Rahul

  • Satellite P300 itself keeps restarting after the initial splash screen.

    My Satellite P300 itself keeps restarting after the initial splash screen.

    Start-up of the first screen with the F2 and F12 options down is displayed, the screen goes black, then a cursor appears in the upper left corner and flashes once or twice. Then the laptop stops and restarts and goes through the same process again and again.

    That's all with the power adapter is plugged in. If disconnected, he goes through the above process and close with no reboot.

    Any help or advice would be much appreciated.

    Post edited by: aic-poppy

    Start your laptop and enter the settings of the BIOS (F2). Set to its default value. Restart your computer, and press F8 to access the advanced boot menu.
    To start the laptop in safe mode and let us know if it works, try it please.

  • Satellite A500 - restarts in the middle of night - now Hibernate

    Recently bought 2 notebooks - one with Vista, the other with Windows 7. One with Vista restarts in the middle of the night, the other does not. I disabled all the scheduled tasks on one who continues to launch. I checked the Task Scheduler for tasks that may have begun during this time - no task has started.

    I already had 2 laptops Toshiba with Vista and didn't have a problem with restart while they were in hibernation (after that I changed the time for scheduled tasks).

    Hey Bob did this occur if the LAN cable is connected to your laptop or also when the LAN cable is disconnected.
    I had a similar problem with my Satellite L500 and I wanted to test it. Interestingly, it was this laptop does not wake when LAN cable has been disconnected.

    After you turn off the Wake-up on LAN in the BIOS it doesn't happen.

  • Phone keeps restarting after the last update

    After the start of the update of the configuration via Sony PC Companion, this program that, at the time, my PC is getting ready (and it will take some time) himself said update I can unplug my phone or not, so I am disconnected and then I pluged in again. Phone started the update (it is turned off and started the update) and release suddenly came out telling me that my phone is connected. Sony PC Companion tells me to unplug and restart, after that my phone keeps restarts all the time.
    HELP ME GUYS!

    Try a system repair using PC Companion as this will often fix questions - this will be factory reset your phone and erase all data

    Turn off your phone and unplug the PC (Hold to increase the volume and power for 10 seconds)
    Start PC Companion and select the area of support then updated my phone/Tablet then blue fix my phone/Tablet and follow the instructions on the screen - when prompted connect your phone turned off always press and hold volume or back button - this should begin the process of repair or reformatting

    If you use Windows 8/8.1 or a 64-bit operating system and then adjust the settings for PC Companion and run in compatibility mode and choose Windows 7 or XP

  • load is0 10 to my iidown phone 6 s after finsh my phone restarts on the screen appear (photo and conncet quail itunes) iconncet my phon with PC and open my itunes

    ADOS iso 10 to my iidown phone 6 s after finsh my phone restarts on the screen appear (photo and conncet quail itunes) iconncet my phon with PC and open my itunes

    and stil again

    Take a look at these articles:

    Solve the iOS update and restore error in iTunes - Apple Support

    Get help with iOS update or restore errors - Apple Support

  • 6 64GB iPhone - restart all the time

    Hello

    Since yesterday my 6 64 GB Iphone restarts all the time.

    There are apple journal on the screen, then screen is black and once again apple appears.

    I can't stop it, I can't go to the deskop. Nothing. Mobile phone doesn't help.

    What will happen? Please notify.

    I've read a few articles that the iPhone 6 have such problems because of the memory of TLC.

    My cell phone is 15 months old, still on warranty. I will send a formal complaint to Apple?

    Thanks in advance for any advice.

    Martin

    MY phone which does too! is it not so boring! I have an iPhone running iOS 10.0 6. Help, please

  • I installed forecastfox to toolbar addon. bar shows up as expected when I restart firefox, the forecastfox doesn't charge. Did I miss a "SAVE" button?

    Forecastfox 2.3.3
    The Bar of the Addon (restored) 3.2.1
    I had to install these because that firefox has dropped at the helm of the addon when I upgraded. These are the same versions that are on my other computer. Firefox and addons play well together.
    The bar addon installed and appears when I run firefox, I added fox planned to add on bar via the button CUSTOMIZE by dragging the icon for forecastfox until the toolbar. Then you click on CUSTOMIZATION of OUTPUT. Forecastfox is in the toolbar and is operational. However, when I restart Firefox, the toolbar begins but the forecastfox does NOT work. Help me please.

    Well, whatever. It was very good work. Play well.
    Please report your last post as solved while others will know.

  • How the other drive app option to calculate calories? I did 45 minutes yoga with him and he showed the 260 callus which is high of 45 mins of yoga session.

    How the other drive app option to calculate calories? I did 45 minutes yoga with him and he showed the 260 callus which is high of 45 mins of yoga session.

    ISuspect that is not correct.

    Hello

    Saving workouts through the app to drive using others as the type of activity, active calories are estimated at a rate equivalent to a brisk walk or based on the data recorded by the heart rate sensor, according to what is higher.

    The following steps can help to improve the accuracy of the estimates made by your watch:

    • Estimates for calories and other results depend, in part, your personal information. To verify that it is accurate:
      • On your iPhone, in the application of the watch, go to: My Watch (tab) > health > Edit (top-right).
    • While training, to optimize the performance of the heart rate sensor (data from which is used when estimating calories), make sure you wear your watch fits on top of your wrist. Apple suggests that consider you the clamping Strip before starting a workout and it loosen again thereafter.
      • Note that the heart rate sensor is likely to give better results for the workouts that involve rhythmic (such as running) rather than the irregular movements.
    • Calibrate your watch can improve the accuracy of various estimates related to the activity, including estimates of calorie. To calibrate your watch, follow the instructions in the link below support article. You can reset your calibration data and start the process:
      • On your iPhone, in the application of the watch, go to: Watch My > privacy > Motion & Fitness > tap reset Calibration data.

    More information:

    Use of the workout on your Apple Watch - Apple Support

    Your heart rate. What it means, and where on Apple Watch you will find. -Apple Support

    Calibrate your Apple Watch for better accuracy of training and activity - Apple Support

  • This morning update of Firefox has been downloaded but does not restart the laptop. He's trying to start and the lights on the keyboard. He continually tries to restart. The screen is blank. It was working fine until I clicked on restart.

    PC IS A COMPAQ PRESARIO V6000 RUNNING WINDOWS XP

    PC DOES NOT RESTART AFTER THE LAST FIREFOX DOWNLOAD THIS MORNING

    The PC screen does not light and I think he's dead. It can be quite fortuitous, and there may be a hardware failure that he would have stopped working even without the download of firefox. I'll have to consider Repair shop and see if anything can be saved on the hard disk.

    Thanks anyway

    Dave

  • Portege M750 restarts after the standby or Hibernate mode

    Since I remmember I use my laptop with activate the sleep and hibernation features.
    A couple of days, it started not to restart after the sleep or Hibernate mode.

    You have to take the battery or current alternative, then it starts but without taking the sleep/hibernate.

    Another thing is that when you press the switch on the alternating current led, which is normally green button, it flashes yellow with some sort of a code long and short flashes.

    This happens with different OS cause I tried to reinstall and the problem persists.

    > Another thing is that when you press the switch on the alternating current led, which is normally green button, it flashes yellow with some kind of code long and short flash

    I know that if there is a failure of memory the * power indicator * flashes repeatedly on and off the power (0.5 sec) if there is an error in the slot A the indicator would blink twice in orange, and then green.
    If there is an error in the B slot, the LED will Flash orange and green twice.
    If the error is in the two slots, the LED flashes twice green and orange.

    By the way: it's your BIOS up-to-date?

  • Mac has constantly force restart in the middle of using Mac

    Hello

    My Macbook air constantly restarts in the middle of using it. It was past 1-2 times / day for the last 2 weeks. It doesn't happen when I open application or when I do some activity, as far as I'm concerned. When it stops, the screen looks like the image below. I also have the text in the report that I sent to Apple every time that happens, if that helps. What do you think is the cause?

    OS x: when your computer spontaneously restarts or displays "your computer restarted because of a problem." - https://support.apple.com/HT200553

    OS X Yosemite: If your Mac restarts and a message - https://support.apple.com/kb/PH18791

    How to troubleshoot a kernel panic - http://www.macworld.com/article/2027201/how-to-troubleshoot-a-kernel-panic.html

  • I removed the check mark to "Accept cookies from sites" in the Privacy tab, but when I restart Firefox the check mark is back!

    I removed the check mark to "Accept cookies from sites" in the Privacy tab, but when I restart Firefox the check mark is back! This problem started with version 3.6 and so I upgraded to version 5, but the problem remains. Any suggestions?

    Preferences are not saved

    https://support.Mozilla.com/en-us/KB/preferences%20are%20not%20saved

    Check and tell if its working.

  • iPad will not restart after the update iOS9.3. Should force us the reboot?

    iPad will not restart after the update iOS9.3. Should force us the reboot?

    By restart do you average will not turn on?

    There seems to be a bit of a problem past, especially with older models of iPad 2. Some people have reported success after that restore their device via iTunes, for others that it has not worked and all they get is a message "bring it in an apple store.

    Since it affects a lot of people, I think it's safe to say that the problem lies in the range of Apple. But I don't think it is recognized or no matter what put forward fix.

    You can try to restore your device, or you may just be stuck waiting to see if a fix comes out.

    http://support.Apple.com/kb/HT1414

Maybe you are looking for

  • After download iOS 10.0.1 from mac recovery mode

    After updating to iOS 10 my iPhone 6 s to the recovery mode. I connect it to my iTunes and it said iOS 10.0.1 must be downloaded. Anyway, I have download it again but to extract process disconnects my iPhone iTunes. I have the latest version of iTune

  • Logging of additional results of step before reminder

    In my sequence, the recall of SequenceFilePreStep checks if a step is a test step (e.g. NumericLimitTest). If this is the case, a value of temperature of an overall picture must be kept at additional step results. Let's say the array of temperature i

  • Desktop HPE 490

    I have a desktop computer of 490 HPE that I would like to upgrade memory and graphics card. I'm sure that memory needed but couldn't find a graphics card that I'm sure will work and will be the best / fastest possible for my unit. I can use any possi

  • Window of play in POGO games are nearly half the size of java window...

    I recently bought a new computer. Windows 7 is the OS that comes with it. I used to have Windows XP. I am a subscriber of POGO. Before when I played on POGO game filled my Java window. Now no matter what I try (i.e. ALL) my 'game' window is half the

  • Writing to the mapped network drive stops intermittently

    I have a professional machine of windows 7 which has a mapped network drive and a python program that writes on the mapped drive. Occasionally, she stops writing on the part. The only thing I noticed is that the computer browser service keeps stoppin