Restart on another drive

Similar Questions

• My computer keeps restarting with a driver failure

  I have a laptop Acer Aspire that I have had for about 9 months. I've noticed a few problems over the last 4 months with this computer. It keeps restarting now. Sometimes after it restarts once it starts up perfectly fine but other times he keeps just restarting without end I tried to do a clean boot, cleaning the registry, the chkdsk, the sfc and update the display driver (since sometimes random color banding appears on the screen instead of a reboot or the Office would just go crooked with lines paralyzed at startup programs open to the top or icons). But im still getting the same problem and recently I got a blue screen on a driver failure.

  These are the details that I received from whocrashed:
  crash dump file: C:\Windows\Minidump\101713-49764-01.dmp
  Uptime: 03:29:14
  This was probably caused by the following module: ntkrnlmp.exe (nt! KeBugCheckEx + 0x0)
  Bugcheck code: 0x9F (0x3, 0xFFFFFA8007855A10, 0xFFFFF800064223D8, 0xFFFFFA8006974880)
  Error: DRIVER_POWER_STATE_FAILURE
  Bug control description: this bug check indicates that the driver is in an inconsistent or invalid power state.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.
  Any help will be appreciated

  S

  There was only a single file DMP here

  Your other machine crash is connected to AODDriver2.sys AMD OverDrive Service pilot from Advanced Micro Devices.

  I would like to re - install the most recent driver available (even if the same date) and if you're overclocking STOP

  In addition I would like to remove and replace Kaspersky with MSE

  Kaspersky is a common cause of BSOD.

  
  

  I remove and replace it with Microsoft Security Essentials at LEAST FOR TESTER.

  http://support.Kaspersky.com/downloads/utils/kavremover10.zip
  http://www.Microsoft.com/security_essentials/

• The CFA (cache files) are too big, can I delete or move to another drive?

  What are the importance of CFA files so I am done editing a sequence? The CFA (cache files) are too big, can I delete or move to another drive?

  Is no need to delete as soon as you restart first they will be generated again.

  You can reinstall them in the preferences and the media.

• How to move itunes library to another drive on the same PC?

  Please indicate the steps required to move iTunes library to another drive on the same PC?

  Drag the entire iTunes, not only in the iTunes media folder, there, launch iTunes with the SHIFT key, and then choose it.

  (144009)

• How better to import everything from WaveBurner a reader to one empty WaveBurner on another drive?

  I have a large amount of CD I put together in WaveBurner on an internal drive which is full. I know there is an import button to import audio files.

  But I want not just audio files, but all projects, so I can still work on them.

  How better to import everything from WaveBurner a reader to one empty WaveBurner on another drive?

  I thank very you much for your time and patience.

  Since no one answered my call, I sat and researched and studied WaveBurner behavior and I can myself answer my question and solve. Since there were a lot of people asking similar questions on WaveBurner files I will post what I learned.

  Whenever you drop your audio files in the list window to make your WaveBurner CD copy not copy your audio files, but relies on the original audio file, where they are located. So whenever you move the files orig. and you open WaveBurner, it can't find those and displays an error window to suggest it will search for the missing file or if you know where he is now lets you find manually. WaveBurner usually place the .wb3 project file that contains everything including your home folder.

  For this reason, I reserve now an audio file WaveBurner also folder in my home folder. In order to save themselves from WaveBurner cannot find the audio file, all audio files that I do, I put in my folder of audio files WaveBurner first, then copy them in WaveBurner from there.

  When I need to use a bigger hard drive I copy .wb3-WaveBurner projects based, but also my

  Sound folder WaveBurner for the home folder on the new hard drive.

  WaveBurner is now all audio files without problem.

  I hope that this will be a unique problem to someone else. Happy WaveBurning.

  W.W.

• can I share documents in iCloud drive with another drive to iCloud user?

  can I share documents in iCloud drive with another drive to iCloud user?  If so, how to do that?

  No, at the present time, iCloud is configured for use by a single account to share data between devices of the owner of this account.  Your best bet for what you are looking for would be to use a third party application like Dropbox or Google Drive.

  You can share files individual even if - iWork sharing links to documents in iCloud - Support Apple iWork

• Configure Windows Update to use another drive

  Hello... Please tell me how to configure the windows updates for download on another drive... and store the "Uninstall" on a separate disk.  I am using Windows Server 2008.  Because I can't enlarge the reader, I'm quickly running out of space.  I really need to do updates, but I can't with any additional load.

  Hello CubsFan21042,

  Your question of Windows Server is more complex than what is generally answered in the Microsoft Answers forums. It is better on TechNet Forum. Following your question thanks for posting the link below:

  http://social.technet.Microsoft.com/forums/en-us/winserverwsus/threads

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• When I copy the files to another drive I lose sight that I put in place

  I have a folder of music with MP3s set up for show, track, year, artist, Album name, duration, and then sorted by Album title and show in groups.

  When I try to copy these files to a different drive (such as a backup copy), they lose that point of view I have Setup and it wou; d take me a long toime to reset the points of view for all folders is not good.

  Hello

  When copy you it to another drive, it will take the default order of windows.

  For reference:

  http://support.Microsoft.com/kb/306554

  http://support.Microsoft.com/kb/812003

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 /) how to back up and restore the registry in Windows

• Because I bought a full version of 7, I buy a license and install the win7 os or I have to buy another drive for an upgrade to another machine?

  WinXP Win7 upgrade options

  I had a HP machine with xp that has failed. Bought a full blown and installed on a new PC win7 os. I still have another machine hp with xp on it. Because I bought a full version of 7, I buy a license and install the win7 os or I have to buy another drive for an upgrade to another machine?

  Product keys are not sold without installation media.

  Don't buy product keys for sites that sell just a product key - they are not authentic.

  You can buy Windows 7 Upgrade here (or at a local store):

  http://www.microsoftstore.com/store/msstore/cat/CategoryID.44066700

  There is no discount on a second license of Windows 7 If you already have a Windows 7 license.

  How to install Windows 7:

  When you have XP:

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

• How can I move the OS to another drive.

  I have a HP Pavilion Elite HPE with Win7 Pro as my OS and a single 1 TB HD.  Is it possible to move my C and D partitions to a smaller drive?  If so, how do I.  (I realize I have to buy another drive... (LOL).

  Thanks in advance for any help/suggestions.

  C   ;-)

  cindy906 wrote: I have a HP Pavilion Elite HPE with Win7 Pro as my OS and a single 1 TB HD.  Is it possible to move my C and D partitions to a smaller drive?  If so, how do I.  (I realize I have to buy another drive... (LOL).

  Thanks in advance for any help/suggestions, C ;-)

  Hello cindy906, you should be able to add a smaller hard drive to your system and use the restore disks HP recovery that you should already have, while leaving the current hard drive installed.

  There is a question that you would need to know. If you leave the current hard drive cables connected and use the Recovey HP restore to reimage the new hard drive, when you start the installation of the Windows operating system, the installation program (System partition) can be changed on the current hard drive. If you install Windows7 SP1, the Boot Manager will be changed and make the current version no longer starts.

  Windows 7 creates a configuration (System) partition when it installs hidden. When there is already a system on a system partition, Windows 7 will be find and replace it with the new OS when you update to Windows 7 SP1.

  Once the new disk has been reimagee with the game to restore HP Recovery disks, and the operating system has been installed, you can then reconnect the cables on the current hard drive and use it as a backup drive or delete it if you prefer.

  You would not be able to move the current hard disk to another system, for legal reasons and problems of compatibility with the already installed drivers for the HP computer, unless you formatted the hard drive and deleted the C: and D: partitions and the hidden partition of 100 MB.

  If all three partitions are formatted, the reader could be wiped clean and could be used on another system.

• My hard drive is a failure. How can I save all the files (CIN OS) on another drive

  I just want to copy everything to another drive hard, but every time I try this it is a problem and the process ends

  You must use the disk cloning software (Windows 'copy' cannot be used to copy the operating system) but if the 'problem' is caused by the failed drive, you have waited too long.

  If you have a Western Digital hard drive, you can get a free version of Acronis WD's (http://support.wdc.com/product/downloaddetail.asp?swid=119) or you can buy separately cloning s/w (this is not an exhaustive list and is in no particular order):

  Acronis True Image Home 11
  EASEUS ToDo Backup
  Paragon Drive Copy or Partition Manager Personal
  Casper
  Norton Ghost

• move the backup of the plant to another drive

  I want to spend my 'factory image' folder to another drive in solid state.  How can I do?

  Thank you. I keep getting messages that runs the D: drive low disk space.  Since I have an SSD, I need to do something to extend the partition or get a second SSD and move the D: on the second disc.

  Thanks anyway.

• Can I change the operating with another drive, and then use the recovery CD to restore my operating system on the new drive?

  I have 2 hard drives. I want to replace the smallest disk, which can be found be the operating drive. If I removed and installed another drive and used the recovery CD the I bought with the computer, I'll be able to re - install new hard disk?

  Hello

  Yes, you can change the hard drive and reinstall Vista using recovery disks.

  You may or may not have problems of reactivation.

  If you do, use the telephone option and hold firmly explain to a real person in the situation.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Move the Users folder to another drive or partition under Vista 64

  I want to move my full users folder to another drive or partition under Vista 64-bit.

  I found these instructions to do with Windows 7 and confirm that they work very well on a Windows 7 computer I set up yesterday.
  http://Lifehacker.com/5467758/move-the-users-directory-in-Windows-7
  ROBOCOPY, RMDIR, MKLINK programs all exist in Vista and have all the command line switches such as specified in section of Windows 7.
  I want to use junction points as described in the article, rather than messing around with search-and-replace in registry. The use of junction points is cleaner and easier to reverse if I ever need to move the Users back folder to its original location.
  These same instructions for Windows 7 works with Vista 64 bit to move my users folder to a different hard disk or partition?

  Well, I couldn't wait any longer for a response.

  So I gave him a test and Windows 7 instructions work perfectly with Vista 64 - bit word. Hope it will be useful to someone else.

• Can I move the contents of "C:\Users\myname\AppData\Local" to another drive in my computer?

  Can I move the contents of "C:\Users\myname\AppData\Local" to another drive in my computer? I have a 64 GB SSD and these files decrease the size of my disk. I know that I can delete them manually. I move the 'temp' and 'tmp' on another disk. Can I move the other too?

  C:\>set
  ALLUSERSPROFILE = C:\programdata
  AppData=C:\Users\Mr.Daza\AppData\Roaming
  CommonProgramFiles = c: files
  COMPUTERNAME = MRDAZA1
  ComSpec=C:\Windows\system32\cmd.exe
  DFSTRACINGON = FALSE
  FP_NO_HOST_CHECK = NO
  HOMEDRIVE = C:
  HOMEPATH=\Users\Mr.Daza
  LocalAppData=C:\Users\Mr.Daza\AppData\Local
  LOGONSERVER = \\MRDAZA1
  NUMBER_OF_PROCESSORS = 4
  OS = Windows_NT
  Path = c: Files\Microsoft Shared live; C:\Windows\syst
  em32; C:\Windows; C:\Windows\System32\Wbem; C:\Windows\System32\WindowsPowerShell\v
  1.0\; C:\Program Files\Windows Live\Shared
  PATHEXT = .COM; EXE;. BEATS;. CMD;. VBS;. VBE;. JS;. JSE;. WSF;. WSH;. MSC
  PROCESSOR_ARCHITECTURE = x 86
  PROCESSOR_IDENTIFIER = x 86 family 16 model 2 Stepping 3, AuthenticAMD
  PROCESSOR_LEVEL = 16
  PROCESSOR_REVISION = 0203
  ProgramData = ProgramData
  ProgramFiles = c: Program Files
  PROMPT = $P$ G
  PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
  PUBLIC = C:\Users\Public
  SESSION = Console
  SystemDrive = C:
  SystemRoot = C:\Windows
  TEMP = E:\TEMPOR~1\Perfil\Temp
  TMP = E:\TEMPOR~1\Perfil\TMP
  TP_ApisHookObjectsRoot_PID3548 = 65FD78
  TRACE_FORMAT_SEARCH_PATH=\\NTREL202.ntdev.Corp.Microsoft.com\4F18C3A5-CA09-4DBD-
  B6FC-219FDD4C6BE0\TraceFormat
  USERDOMAIN = MrDaza1
  USERNAME = Mr.Daza
  UserProfile=C:\Users\Mr.Daza
  windir = C:\Windows

  Hi Mr.Daza,

  It is not possible to move the content. This can cause applications to malfunction. However the next time you install a program, you can choose where you want to install it.