Restart the computer to complete the installation of updates
I get an error message saying "Windows cannot update of important files and services while the system uses them. Be sure to back up your files before you start again. "I shut down my computer several times, and I still get this message. call me in 10 minutes etc. If I put the computer in mode 'sleep' it keeps restarting itself throughout the night. Suggestions please.
Sorry, no, I don't know what update has been installed. I watched the updates of windows and they say they are still installed even last night and I get the error message. I looked at all the recent updates and thus, they are all showed that the installations were successful. I'm not sure but I think it started at the end of last week or the weekend. I'll also try the second suggestion that you did, but I don't know much about computers so it could be a bit of a challenge. Bill
Tags: Windows
Similar Questions
-
I get the following information on the screen.
Skype information
A previous program installation was never completed. You must restart your computer to complete that installation before running the installation of Skype program. Setup will now close
Original title: installation of Skype in Windows 7 Professional
Hello
Please contact Microsoft Community.
I understand that you are facing the question on Skype.
I will definitely help you with this.
Please provide the information below.
1. are you an error code?
2. don't you make changes to the pc before that?
I suggest you go through the links below:
Refer to the suggestion given by John Rubdy replied on May 27, 2011:
Also check out the link below:
I hope this helps. Please post back with the State of the question and we will be happy to help you further.
-
Hello
I have WINDOWS VISTA and just tried to reinstall my laptop of restoration on a HARD disk partition.
The restore went through, but then I got the error: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION
When I press 'OK' (which is the only option), it tries to start again, until I get the same error through the black screen.
How can I get out of this loop please?
Thank you.
Lucie
Hello
For any problem with the help of the recovery Partition that has been copied to the hard disk by the computer manufacturer, you must contact them.
This recovery process is the manufacturer, not Microsoft.
________________________________________________
You never told us why you wanted to do a restore. If you had serious errors and the recovery process does not work, you will have hardware problems. BUT we're only guessing at this stage due to lack of information to help you.
See you soon.
-
Decided to reinstall Vista business after that my lenovo x 200 could not start. After you have reinstalled, had to restart and now it appears
"Windows is unable to complete the installation. To install Windows on this computer, restart the installation.How should I solve this problem?Hello
1. may I know the exact error you received during initialization failed prior to relocation?
2. do you know the exact reason for the failure of start?
I will be asked to get in touch with the manufacturer of the system on this issue.
Installation and reinstallation of Windows Vista, you can fallow the article below:
http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista#section_3
-
I'm install windows vista Ultimate edition in my new laptop, but during the installation stage 'completion', the prompt message as "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation", but my new laptop was no install any OS before, please help
tan7655,
If I read this correctly, you have a portable computer that do not have an operating system on it. You try to install Vista and get the error.
You've restarted the Vista installation? So then you get the same error? If you have tried to install more than once and continue to receive this error, check that the laptop is capable of Vista? You may need to check with the manufacturer of the laptop to see if it is able to support Vista. Mike Microsoft responds to the technical support engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I was doing a reformat of the factory for windows vista on the laptop of my son (packard bell EasyNote LJ 65) when the battery is dead and the computer turned off. When I started it back up it gives the message: the computer restarted unexpectedly or encountered an unexpected error. Windows Setup cannot continue. To install Windows, click OK to restart the computer, and then restart the installation.
Everything I try, I get no further than this message, I don't know where to go to continue the installation. The computer does not see that the installation was not completed. I tried to enter the menu with F9 where I had to do the reformatting of the factory of windows but it will not give me the option to continue installation, it shows just the vista Windows, but when I click brings back me to the error message
Help, please!http://support.PackardBell.com/UK/
For questions about the recovery process, contact the manufacturer of the computer.
This isn't their recovery process, Microsoft.
See you soon. Mick Murphy - Microsoft partner
-
I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?
I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?
Hey
PeLon416
If you have problems with the gateway recovery process, you will need to contact Gateway
It's their recovery process not microsofts
You may have a hardware problem
support of bridge at the link below
http://support.gateway.com/support/default.aspx
Walter, the time zone traveller
-
How can I configure my windows 7 after restoring my laptop to the factory conditians?
My laptop had a blue screen and I couldn't get rid of it, I went into safe mode and restore my computer to factory conditions. When the computer says "the installation program starts services" you stop and I couldn't turn it back on for 15 minutes. When I turned on and tried to contained my setup, a message keeps poping up "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install windows, click ok to restart the computer, and then restart the installation. "But no mader, how many times I reboot my laptop, the same message appears. What should I do? I've restored my computer several times and never had this problem.You should try another recovery.
New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.
If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.
-
PC has not successfully restarted after the installation of updates
Hello
I have been updated with Windows Update and asked to restart my PC after the installation is complete, however, my computer froze just at that moment, so I had to press the power button to force it to close. So I don't a not properly restart but forced my PC to stop and I have not a screen saying "Configuring updates" as usual (because there is no restart appropriate but just a forced to close). When I turned on my PC back, I thought that all updates have been lost or screwed up because I don't restart the PC correctly, however, instead, windows said it was "Configuring updates" (from 0% to 30%) and 30%, he said he has been stop and then rebooted my machine and these updates have been 100% configured/installed.
So my question is, were all 100% installed as said windows updates or was it just a fake reviews? Because I forced my PC to stop rather than restart it when all updates to complete the installation.
In addition, argues that all updates have been installed successfully in the "Installed updates" menu, too. Please let me know if it of a false notice or not.
Thank you
T.
Since you have not stopped correctly after the installation of updates, updates could not configured correctly
Follow these steps to see the Windows updates are installed on your computer.
Open Windows update via Control Panel
In the left pane, click view update history.
Use a system restore to restore your system to a previous state before the installation of the updates
=================
1. click 'Start' and type system restore in the search box, and then click "System Restore" in the section programs.
When you are prompted by the User Account Control feature, click "continue".
2. do one of the following
* If there is a recommended restore point, click on choose a different restore point and then click Next.
* If there no restore points recommended in the list, simply click next to continue.
3. Select a restore point in which you know that the operating system works and then click on "next".
5. in confirmation of your restore point page, click on "Finish".
If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Original title: Error Installing Win Vista Home premium.
I have a PC with Windows Vista Home Premium. Suddenly, it wouldn't start. I changed the boot CD ROM and put my Vista disc in and tried to do a "repair" that it came with missing engine or something like this. After several attempts, I gave up and formatted hard drive losing all my data and programs (rather difficult to backup files when the computer does not start). So, I tried a complete installation. I put in the license code and he started the installation. After a few minutes, the message came; "Windows Setup could not reset the deployment engine. to install windows, restart the installation. I tried several times including completely turn off the computer for several minutes and try again. I tried several times. I thought oh well, I will install my Windows 7 program (this and never used). Error on this installation was: your CPU is only good for 32 bit and Win 7 I have is a 64-bit version. I'D RATHER INSTALL VISTA BUT need help on the error regarding the deployment engine. Thank you, Lloyd
Hello
See if this solution works for you:
See you soon.
-
About a week ago I just bought windows mobile 8 is installed. Now for the last two days while turning on the laptop its gives me a message "your pc will restart in two days for the installation of updates.
To stop, I get three option 1) sleep 2) arrested update 3) and close
What should I do?
Original title: windows update issue 8.
Hi Parichay,
The updates that are being invited to install are automatic updates.
The message you get is offered by Windows 8 after that updates are downloaded and installed.
If you do not restart your computer soon, Windows will force a restart of your computer two days after that it has installed new updates to complete their installation.
You must restart your computer at a convenient time for you, rather than wait two days and have it suddenly reboot maybe at an inopportune time.
Hope that solves your problem.
-
IM TRYING to re - INSTALL WINDOWS VISTA ON MY T-6321 to the front door, BUT WHEN I INSERT THE DISC, AND INSTALL, a MESSAGE APPEARS SAYING: WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D, SHOULD ALL BE ON THE DISCALREADY?
Hi JRCLNSIN100,
Welcome to Microsoft Answers Forums.
We would like to get some more information from you to help solve your problem. You better, please answer the following questions.
· What is the disk you use to reinstall?
· Is this a recovery or reinstalling the disc you are using?
· When exactly do you get this error message?
· What is the edition of Windows Vista, you try to install?
· How old is the drive that you are using?
· How are you starting the installation process?
After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.
First check if you have scratches or dust on the disc and clean the surface and try again.
To check if the disk is wrong, you will need to copy the contents of the DVD to the hard drive and try to install using that.
To perform a flat installation of Windows Vista, follow these steps.
Note The hard disk must have at least 3 GB of free space on the disk for the Windows Vista installation files. The hard disk must have at least 15 GB of additional disk space to install Windows Vista. For more information about system requirements for Windows Vista, see the Microsoft Web site at the following address:
http://www.Microsoft.com/Windows/products/windowsvista/editions/SystemRequirements.mspx
- Insert the Windows Vista installation disc.
- Start Windows Explorer.
- In Windows Explorer, click to select the drive for the Windows Vista installation disc.
- On the Edit menu, click select all.
- On the Edit menu, click copy.
- Click to select the hard disk you want to contain the flat installation files.
- On the file menu, point to new, click the folder, type Windows Vista Setupand then press ENTER.
- Double-click the Windows Vista Setup program, and then click Paste on the Edit menu.
- Double-click Setup.exe, and then follow the instructions that appear.
See the link below for more information on flat installation.
How to perform a flat installation of Windows Vista
http://support.Microsoft.com/kb/928902
This problem can also occur if the firmware of the DVD drive is defective or obsolete.
If the step above does not resolve the question suggests that you install the latest drivers for the DVD player on the computer.
For more information please visit the link below.
Error message when you try to install Windows Vista by using the DVD drive on the computer: "Windows cannot install required files".
http://support.Microsoft.com/kb/930984
Hope this information is useful.
Let me know if it worked.
All the best!
Thanks and greetings
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
PC separations with 0xc01a001d after restarting the installation of SP1
Help please! I installed Vista service pack 1 last nyt via windows update and after installation to restart received the following message;
PC stops with 0xc01a001d after restarting the installation of SP1... system proven recovery and system restore but nothing helped! I am now reinstall visat using the recovery CD, but will have lost all the data, not great! Why has this happened? I am now very reluctant to reinstall SP1 don't want another weekend busy trying to re-vive my laptop!
Please advise...
Thank you!
Windows Update Forum:
It comes with Vista, upgrade install and activate Forum.
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
-
My antivirus and windows firewall was also automatically disabled and I was not able tun back on
So, I tried to reinstall the windows operating system 7, but when I try to install, I get an error saying:
Windows installation encountered an unexpected error. Check that the installation sources are accessible and restart the installation. »
The error code is: "0xE0000 100."
I think that some virus or malware is rampant in my installation of windows system. So, I want to know there is a way to solve this problem...
Ideas or suggestions that anyone has would be greatly appreciated!
Thank you!
See if this post has resolved your problem: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/error-code-oxe000100-windows-installation/aea498e2-09c3-43aa-bfa5-c06e68b1ea0c
J W Stuart: http://www.pagestart.com
-
Hello
Like so many others, I am fighting to get 8 upgraded windows. I have tried all the methods mentioned upgrade
on the forums without success. I have greated iso dvd, tried to use the USB and the installation of office.
Error: Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. [Error code: 0x8007025D]
The error logs:
Setupact.txt
2012-11-04 01:02:27, MoveOldOSFiles IBS Info [0x0600a6]: got through [C:\Windows\] to [C:\Windows.old\Windows\]
2012-11-04 01:02:27, info [0x06412c] IBSLIB SetCheckpoint: Checkpoint ("WinPEArchiveOldWindowsFoldersDoneCheckpoint") current...
2012-11-04 01:02:27, info [0x06412e] IBSLIB SetCheckpoint: Checkpoint 'WinPEArchiveOldWindowsFoldersDoneCheckpoint' have been correctly set up.
2012-11-04 01:02:27, info [0x06412c] IBSLIB SetCheckpoint: Checkpoint ("WinPEImageApplyReadyCheckpoint") current...
2012-11-04 01:02:28, info [0x06412e] IBSLIB SetCheckpoint: Checkpoint 'WinPEImageApplyReadyCheckpoint' have been correctly set up.
2012-11-04 01:02:28, info [0x06009e] IBS DeployWIMImage:Calling IDepWIMImageResolved::Apply...
2012-11-04 01:02:28, info [0x0606cc] IBS calling WIMApplyImage (flags = 0 x 180)...
2012-11-04 01:08:36, ApplyWIMCallback IBS Info [0x0600ae]: a new attempt on the record [offset 0000000075fdfa0a, length 1526856] RULE is [605]
2012-11-04 01:08:36, ApplyWIMCallback IBS Info [0x0600ae]: a new attempt on the record [offset 0000000075fdfa0a, length 1526856] RULE is [605]
2012-11-04 01:08:37, IBS Info [0x0600ae] ApplyWIMCallback: a new attempt on the file [C:\Windows\WinSxS\amd64_nv_lh.inf_31bf3856ad364e35_6.2.9200.16384_none_473133365499807b\nvlddmkm.sys] RULE is [605]
2012-11-04 01:08:41, IBS Info [0x0600ae] ApplyWIMCallback: a new attempt on the record [offset 0000000075fdfa0a, length 1526856] RULE is [605]
2012-11-04 01:08:41, IBS Info [0x0600ae] ApplyWIMCallback: a new attempt on the record [offset 0000000075fdfa0a, length 1526856] RULE is [605]
2012-11-04 01:08:41, IBS error [0x0600af] ApplyWIMCallback: error application C:\Windows\WinSxS\amd64_nv_lh.inf_31bf3856ad364e35_6.2.9200.16384_none_473133365499807b\nvlddmkm.sys. RULE [605] [gle = 0x0000025d]
2012-11-04 01:08:41, error [0x0606cc] IBS WIMApplyImage failed; HR = 0x8007025D [gle = 0x0000025d]
2012-11-04 01:08:42, error [0x0600a1] IBS DeployImage:Image request failed; HR = 0x8007025D [gle = 0x0000025d]
2012-11-04 01:08:42, error [0 x 060082] IBS Callback_ImageTransfer: unable to set the OS image. HR = 0x8007025d [gle = 0x0000025d]
2012-11-04 01:08:42, PublishCriticalError IBSLIB Info: publish error message critical [Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. [Error code: 0x8007025D]
2012-11-04 01:08:42, info [0x0a013d] UI accept Cancel. Leaving the Page's progress.
2012-11-04 01:08:42, info UI entering Page Cancel.Setuperr.txt
2012-11-04 01:08:41, IBS error [0x0600af] ApplyWIMCallback: error application C:\Windows\WinSxS\amd64_nv_lh.inf_31bf3856ad364e35_6.2.9200.16384_none_473133365499807b\nvlddmkm.sys. RULE [605] [gle = 0x0000025d]
2012-11-04 01:08:41, error [0x0606cc] IBS WIMApplyImage failed; HR = 0x8007025D [gle = 0x0000025d]
2012-11-04 01:08:42, error [0x0600a1] IBS DeployImage:Image request failed; HR = 0x8007025D [gle = 0x0000025d]
2012-11-04 01:08:42, error [0 x 060082] IBS Callback_ImageTransfer: unable to set the OS image. HR = 0x8007025d [gle = 0x0000025d]Any help will be greatly appreciated.
Thank you for all the answers. Finally managed to get installed it. Download 4 times. Whenever he stopped at different percentages, so I expected the download is corrupt. Finally in the format of my other readers, installed windows 7 on it and then downloaded windows 8. Finally, it worked. Had to be something with my player.
Thanks again. -
PROBLEM WITH THE INSTALLATION OF UPDATES
When the computer tells me to reboot to complete the installation of updates, I do. It stops normally, but when he tries to restart, the screen goes completely dark. I have to press the market / stop button for 4 seconds & it stops. I wait a few minutes start computer & it starts normally & then it finish installing updates. My question is what could cause the problem? I learned recently by Microsoft (office of answers) that there is a big possibility that I corrupted the registry files. She did a remote help on this laptop for a problem with the execution of any Microsoft fix it Solutions.
I would like to know what else could be the cause of the problems and what I could try to fix it?
CF. http://answers.microsoft.com/en-us/windows/forum/windows_vista-update/windows-updates-wont-install/9ae86061-ff1e-4996-b5a2-8918d01588ab (10 Dec-15)
Maybe you are looking for
-
G6 - 2293ca retrograde in W7 64 bit and missing drivers
HP Pavilion g6 - 2293ca (OEM with Windows 8). I reformatted the HD and I replaced it Windows 8 with Windows 7 Prof I searched drivers for the laptop and just W8 is supported. I've read a few forum posts and found others with the same problem and the
-
HP officejet pro 8610: print is not beyond frustrated!
grrrrr... cannot print all of a sudden! was printing fine one day... .the next nothing! I tried EVERYTHING, rebooting turning on a doctor... impression even tried to uninstall and install... nothing that I finally got an error message on the compute
-
I use google chrome as my browser. When I opened my browser I'm advised that partner of browser has crashed. Click on this balloon. even after clicking, it is not rectified. How to remedy. Give details me.
-
Zoom after new wallpaper and wallpaper wallpaper becomes half black after hitting the home button, sets the right after hitting 3 - 4 times the home button
-
Notification of updates to RVS4000 IPS
We have the RVS4000 and have turned on IPS. How can I be notified (e-mail would work) when there are updates to the IPS signatures, so I can keep our current IPS signatures? Thank you!