Restart the issue volume of EDA500

Similar Questions

• There is no volume after restarting the device. Need urgent help

  Hello.

  Our ReadyNAS RN31600 iSCSI target device. We have (had) two LUNS of 8 terabytes each built on X - RAID 5, which are presented on a Windows Server.

  This device is less than a year, and he began to have problems today. First two LUNS disappeared from the iSCSI (WS 2008 R2) client. When we tried to restart the NAS server, he's hanging on "restart now, see you soon."

  We power off of the switch and after restarting, two LUNS seem to have disappeared, and the unit is empty somehow? How to solve this problem? Or is it quite normal on the Netgear devices to suddenly lose 16 terabytes of data?

  The GUI shows "there is no volume" and also "delete inactive volumes using disk. Disc # 1,2,3,4,5,6 ". This means that all the disks.

  Firmware is 6.4.0.

  And no, we don't have backups, because this device is used to a backup unit.

  I suggest you to contact support (support.netgear.com), because I think it will be faster than from here.

• How to increase the control limits for the Audio Volume?

  I have upgraded my PC base unit and no longer have the output of the Speaker Volume I had before. The audio output is more silent than before with the same speakers I used. I have moved all the sliders on the control panel of the Volume on their maximum position, but still can't get enough of output to the speakers. The important thing is for my use are 'Volume Control' and 'Wave', and these are set to the maximum. Now I have a motherboard with Intel D845GERG2 Intel i845GE chipset. The operating system is Windows XP Professional SP3, as previously. The sound card is SoundMAX Integrated Digital Audio with Legacy audio drivers. I checked using Device Manager drivers and hardware to work properly. The problem is software because I can achieve the required high speaker volume if I use VLC Media Player and set the volume to 200%. With Windows Media Player, set the volume to 100% is sufficient. I'm looking to increase range parameter on the control panel of Volume as a general solution. Can you advise if this is possible? I looked at a few ideas, these courses: edit files (.inf) SoundMAX driver. Modify the registry keys concerned. Use different audio drivers (none seem to be available for my hardware). Install the software to boost the audio output (VLC Media Player should be achieve this somehow). Install alternative (rollback) Microsoft drivers. Any advice would be much appreciated.

  Just an update of my efforts on this issue.

  I revisited the audio registry settings SoundMAX for HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\ \0005\Settings {4D36E96C-E325-11CE-BFC1-08002BE10318}. These are installed when you install the driver for SoundMAX Integrated Digital Audio. Changing these settings has already failed to get an increase of output audio volume. I have now found some settings of the value of these registry keys that have given me a satisfactory increase in the volume of the audio. In short, the cure for my situation was:

  The file source (wdm3516b_Cadenza.exe) driver available from the Download Center Intel is a self-extracting ZIP file. Unzip this file to a location convenient temporary store (C:\Temp)

  Use a text editor (Notepad) to edit the INF of the driver - in my case, it's "smwdmCH4.inf. Changes to this file cause the digital signature of the file to be invalid, but choose "Continue Anyway" to solve this problem during the installation of the driver. To increase the sound volume levels, the audio volume registry key value parameters that have been predefined 08 (hex) have been changed to 01 (hex). I suppose that this change dB levels produced by the SoundMAX Integrated Digital Audio.

  To install the new settings:

  Uninstall the SoundMAX Integrated Digital Audio hardware by using Device Manager.

  Restart the PC - this should give a "new hardware found" restart of the PC.

  Use Device Manager to reinstall the driver for SoundMAX Integrated Digital Audio. Do not use the automatic selections for this - run the installation process where you stored the INF driver edited file.

  Once installation is complete, a check on the properties of the device must indicate that the device is functioning properly.

  Use regedit to check that changes in the edited file driver INF appeared in the area of the Windows registry - in my case, it is HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\ {4D36E96C-E325-11CE-BFC1-08002BE10318} \0005\Settings.

  I will emphasize that it is NOT a recommended fix - it turns out that it worked for me. The usual caveats apply - save your original settings, or better yet, use software disk image to make a copy of your drive hard so that you go back to square one if she's going "pear-shaped" with adaptations that have been made.

• No way to restart the update of Sierra after cancellation

  Technical details:

  I'm on a mid 2015 macbook pro 15 inch 2.2 ghz, 16 GB of memory, 250 GB of available disk space.

  Downloaded MacOS Sierra of the store. The Installer started and I immediately saw a message that said something like "Cannot install to drive (null)", which expelled the red flags. I canceled the installation and tried to restart from the app store. Unfortunately, the app store says that MacOS has already been downloaded, and there is no way to start the installer again. He is not sitting in my purchases or update the collection.

  Any tips to get this back online and running update?

  Delete or drag to the trash of the app install OS X Sierra in your Applications folder. Try to download again. However, you can try first this:

  Repair the disk for El Capitan

  1. Restart the computer and after the chime hold down the command and R until the Utility Menu appears.
  2. Disk utility and click on the continue button.
  3. Then select layouts withdrawal (usually Macintosh HD) entry of the volume of the list to one side.
  4. Click the first aid tab on the toolbar and wait for the fact button to activate. Click it, and then quit disk utility.
  5. Select restart from the Apple menu.

  Make sure you have at least 20 GB of free space on your drive. Make sure that the drive is formatted Mac OS X extended journaled.

  Basic steps for the OS X upgrade

• Firefox stop loading pages; the problem is solved simply by restarting the browser

  Seemingly random situations, Mozilla Firefox 42.0 on Windows 10 stops any type of loading page. Caution endlessly, any address spinning loading icon is tapped. This problem is solved only when I restart the browser (just by closing and opening this new patches).

  Is there a reason for that to happen?

  Hello, everyone.

  I'm sorry that it took me so long to revisit this issue.

  It seems that the pain I was experiencing was caused by one of the two addons: roomy Bookmarks Toolbar and (BookmarksBar) hide (or) Show - Hide Bookmarks Toolbar (can't remember who it is because I have already deleted them).

  It seems that one of them, or a combination of these addons caused problems of the no-load. Given that I removed these addons, it disappeared completely.

  Thank you for your help.

• After the upgrade successfully 10.0.2 and 11, when I restart the next day, 3.6.28 opens. Please notify

  using xp SP3. This happens every day since the upgrade to the new versions. Power upgrade successfully and use for the rest of the day. Then, after a stop in the night and when restarting in AM, older version opens.

  Without trying something new since my last post, for reasons I can't understand, the issue is resolved. I've waited several days (to respond) to confirm everything works correctly, and for the moment, everything is good. THANK YOU for all that you said. This was my first use of the forum and I appreciate your time and your generosity.

• HP laptop - 15-ay005np: keys on the keyboard Volume control does not

  Volume down key (f7), increase in key (f8), key (f6) mute worked very well until I update windows 10, this week. What should I do to fix this?

  Thank you

  Hello

  Try the following.

  Download Realtek HD Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp75501-76000/sp75513.exe

  When finished, press and hold the Windows key and press R

  In the run window, type devmgmt.msc and press to enter.

  In Device Manager, expand sound, video and game controllers.  Right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp75501-76000/sp75505.exe

  When the reinstallation of Chipset has completed, restart the laptop.

  When windows has reloaded, open your download folder, right click on the installer of Realtek and select "Run as Administrator" to launch the installation.  Once this done, reboot the laptop and let windows load completely for a few minutes before checking.

  Kind regards

  DP - K

• Keys on the keyboard volume control does not

  Hi, I bought hp pavilion g6-1105tx 4 days ago. Key to increase volume, decrease key and mute the button worked very well until I have updated by audio drivers from hp support assistant. they no longer work. How to solve this problem?

  Hello

  Try to download and install the latest version of the HP driver from the link below - this can be the same as that applied by HPSA, but try to reinstall it.

  FTP://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52790.exe

  Once the installation is complete, restart the laptop.

  If the above does not solve the problem, try reinstalling the buttons to quick launch the installer on the following link.

  FTP://ftp.HP.com/pub/SoftPaq/sp53001-53500/sp53135.exe

  Yet once, restart once the installation is complete.

  Kind regards

  DP - K

• L50A satellite - Internet stops frequently answer until I restart the pc

  Hello

  I had a problem of delay where internet seems to stop working.

  The details of the network connection to the bottom near the clock in the taskbar still say connected her with access to internet, but it does not.

  I have another older laptop that uses the same wifi network, and its internet access still works when this laptop stops. It seems to start working again after restarting the PC.

  Even on a start fresh, the internet will not work until I did a reboot.
  This corresponds to every start.

  Once it works, it will work for a little while, until it stops again - usually coinciding with the end of the hour.

  Any thoughts?

  Hello

  Just a question: you're talking about a LAN or WLan connection?
  The same problem of internet connection is displayed using two connections: WiFi and LAN?

  In case the problem appears only using WLan, I would recommend simply workarounds:
  (1) update the WLan driver
  This is essential. In many cases, old and not updated the driver may cause different problems for different WLan routers/modems.

  (2) check the open home WiFi with WiFi (non-secure) connection. In many cases of different standards of encryption (WEP, WPA, WPA2, etc) could create problems between the laptop (card WLan) and WLan router due to compatibility issues. But beware: the unsecured WiFi should be used only for testing purposes.

  (3) Last but not least, check if power save settings would affect the performance of WLan. In Device Manager-> card WLan-> properties-> tab power management, ensure that the option isn't checked (should be unchecked)

  I hope this helps to find the problem

• cannot restart the computer after the installation of el capitan 10.11.3

  After installing el capitan 10.11.3 on my iMac intel with lyon, my screen is gray and I can't restart.  I lost the free memory.  Help!

  Please take each of these steps that you have not already tried it. Some of them are not applicable to your model or your situation. Stop when the problem is resolved.

  To restart a computer is not responding, press and hold the power button for a few seconds until the unit turns off, then release, wait a few seconds and press again briefly.

  Step 1

  The first step to respond to a startup failure is to secure data. If you want to keep the contents of the boot drive and you have not already at least a current backup, you should try to back up now, before we do anything else. It may or may not be possible. If you don't care the data changed since the last backup, you can skip this step.

  There are several ways to back up a Mac that is unable to boot. You need an external hard drive to store backup data.

  a. starting the partition recovery or an hour Local Machine backup volume (button option key at startup). When the OS X Utilities appears, launch disk utility and follow the instructions in this support articleto the title of the "Instructions for the backup on an external hard drive via disk utility". The article refers to the start of a DVD, but the recovery mode procedure is the same. You don't need a DVD if you use OS X 10.7 or higher.

  (b) If step 1 fails due to disk errors, and no other Mac is available, then you may be able to save some of your files by copying them in the Finder. If you already have an external hard drive with OS X installed, the start of it. Otherwise, if you have access to the Internet, follow the instructions on this page to prepare the external hard drive and install OS X on it. You will use the installation program of recovery, rather than download it from the App Store.

  c. If you have access to a Mac, and it work and have both the non-working Mac FireWire ports or stroke, start the Mac non-working in target disk mode. Work Mac to copy the data to another drive. This technique will not work with USB, Ethernet, Wi - Fi or Bluetooth.

  d. If the internal drive of the non-working Mac is replaceable by the user, remove it and climb into a docking station that is pregnant or an external drive. Use another Mac to copy the data.

  Step 2

  If you have booted from an external drive, make sure that the internal boot volume is selected in the pane of the system preferences Startup disk.

  Start in safe mode. Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. If you do not see the words "Safe Boot" in the start screen, you did not start in safe mode. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, and some things don't work at all, including the networks without wire on some Macs.

  The login screen is displayed even if you normally connect automatically. You must know the password for the connection to connect. If you have forgotten the password, you will have to reset it before you begin.

  If the startup progress bar gets stuck for more than a few minutes, or the system stops automatically when the progress bar appears, the boot volume is corrupted and the player is probably defective. In this case, go to step 9. If you have another problem with the player, replace it immediately.

  If you can start and log in in safe mode, empty the trash and then open the window of info on the boot volume ("Macintosh HD", unless you have given it a different name.) Make sure you have at least 9 GB of space available, as shown in the window. If you do not, copy as many files as necessary on another volume (not another folder on the same volume) and delete the originals. Deletion is not complete until you empty the trash again. This, until the space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)

  If the boot process hangs again, the problem is probably caused by third-party software you have installed. Ask for additional instructions.

  Step 3

  If the startup process stops at a gray screen together with a mobile cursor, then the logon dialog box may be active but not visible because of a bug. You may be able to connect by using the arrow keys or the cursor to select the password field and type your password as usual.

  Step 4

  Case of failure of step 3, the boot volume can be complete. If you saw previously implemented guard space drive is low, it is certainly the case. You might be able to start in safe mode , even if you cannot boot normally. Otherwise, boot from an external hard drive, or well technology for step 1b, 1 c or 1 d allows to mount the internal drive and delete some files. According to the documentation from Apple, you need at least 9 GB of free space on the boot (as shown in the Infolog) for normal operation volume.

  Step 5

  If a Mac desktop (without the built-in keyboard) crashes on a gray screen together with a mobile cursor, the keyboard may not be recognized. Hold down the button on the side of a wireless Apple keyboard to make it discoverable. If need be, replace or recharge the batteries. If you use a USB keyboard connected to a hub, connect it to a built-in port.

  Step 6

  Sometimes, a startup failure can be solved by resetting the NVRAM.

  Step 7

  If there is an integrated optical drive, a disk may be stuck in there. Follow these instructions to remove it.

  Step 8

  Press and hold the power button until the unit turns off. Disconnect all devices wired except those needed to start and remove all aftermarket expansion cards. Use another keyboard and/or mouse, if these devices are wired. If you can start now, one of the devices that you disconnected, or a combination of both, the origin of the problem. Discover that it is a process of elimination.

  Step 9

  Launch the utility disk in recovery mode (see step 1). Select the boot volume, and then run the repair disk. If problems are found, repeat until that clear. If disk utility reports that the volume is not repairable, the drive is defective and must be replaced. You can choose to tolerate such malfunction in the reader's life. In this case, delete the volume and restore it from a backup. If the same thing happens again, replace the drive immediately.

  It is one of the rare situations where you must also run repair permissions, ignoring the erroneous warnings, that it can produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.

  Step 10

  If the boot device is an aftermarket SSD, it may have an update and/or a forced "garbage collection". Instructions how to do this with a Crucial SSD of brand have been posted here. Some of these instructions may apply to other brands of SSDS, but you should check with the technical support of the provider.

  Step 11

  Reinstall the OS. If the Mac has upgraded an earlier version of Mac OS X, you need the Apple ID and password used to upgrade.

  Step 12

  Do as in step 11, but this time clear the disk utility boot volume before installing. The system should restart automatically in the installation wizard. Follow the prompts to transfer data from one Time Machine or another backup.

  Step 13

  This step applies only to models that have a battery logic-board ("PRAM"): all of the Mac Pro, MacBook with a removable main battery and a few others (models not updated). A flat battery logic-board may cause a boot failure. In general the failure will be preceded by the loss of the system and boot disk clock settings. Refer to the user manual for replacement instructions. You may need to take the machine to a provider of services to have to replace the battery.

  Step 14

  If you get this far, you probably deal a hardware failure. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

• How can I restart the Apple TV Remote (4th Gen)

  Hi all

  I have a relatively new Apple TV (4th Gen) and tonight after a few weeks of work perfectly, the remote control slide to the right and in other directions only intermittently. I read up before you call Apple and it seems to me that it is a new issue. Here my question is it possible to restart the remote where the little glitches occur. A poster suggested battery, it looks like there must be a pressure button to reset the remote control, if you know of one, please post. I'll try next, logout and re-pairing to see what is happening, and then from there head to the store tomorrow.

  Any ideas appreciated.

  So I solved the problem by restarting the Apple TV itself, and now the remote works again. Also amazing that my iPhone was working very well as a remote control before the reboot, so don't know why this Apple TV restarting fixed but there.

• Button / stop and the down volume button does not

  Hello, I got a G4 bike for less than a month and the power on button and the low volume button are a reagent.

  Hello

  I have the same problem. It certainly isn't a hardware problem, because after holding the power button for about 30 seconds, I was able to reset my phone.
  It works well after the restart.

  Best regards
  Diana

• FileVault has failed. Unable to encrypt the logical volume to basic storage

  Hi, I have just bought a new iMac and decided to not migrate from my previous Mac (I got 5 machines). Instead, I decided to install all the software and my own docs.

  Now I have the iMac perfectly clean and nothing makes 'noise '.

  When I'm trying to encrypt my HD, there is an Error Message "could not encrypt the logical volume to basic storage.

  It does allow me to continue.

  I restarted the mac several times and I ran the first aid.

  Details of soft and hard are the following:

  

  

  Any ideas? Someone with the same problem?

  Thank you!

  This procedure is a diagnostic test. It makes no changes to your data.

  Please triple - click anywhere in the line below on this page to select:

  { diskutil list; echo; diskutil cs list; } | pbcopy

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing the command-V key combination. I tested these instructions only with the Safari browser. If you use another browser, you may need to press the return key after pasting.

  Wait for a new line ending with a dollar sign ($) below what you entered.

  The output of the command will be automatically copied to the Clipboard. If the command produces no output, the Clipboard is empty. Paste into a reply to this message.

  The Terminal window does not display the output. Please do not copy from there.

  If any personal information appear in the output, anonymize before posting, but do not remove the context.

• "Restart the computer due to a problem"

  I've had issues with my MacBook Pro 15-inch, mid 2010

  It restarts unexpectedly and it becomes very annoying. I've seen other messages of this kind of problem, but none with as old as my computer is. I was wondering if there is anything Apple Support can tell me about fixing the issue and how it could be. Thank you

  Here is the report of panic:

  Anonymous UUID: 14C965B4-65A1-1B22-3C9D-103152B4ECDC

  Wed Dec 23 09:33:47 2015

  Panic report *.

  panic (cpu 0 0xffffff7f9004fbdb appellant): "panic GPU: 7f [] 5 3 0 0 0 0 3: NVRM [0 / 1:0:0]: error 0 x 00000100 reading: CFG 0x0a2910de 0x00100000 0x00000000, BAR0 0xb0000000 0xffffff8080028000 eMuxControl/kext/GPUPanic.cpp:127 P2/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.10.22/src/Appl 0x0a5480a2, D0,

  Backtrace (CPU 0), frame: return address

  0xffffff80131baca0: 0xffffff800d32bda1

  0xffffff80131bad20: 0xffffff7f9004fbdb

  0xffffff80131bae00: 0xffffff7f8dec2b9f

  0xffffff80131baec0: 0xffffff7f8df8c18e

  0xffffff80131baf00: 0xffffff7f8df8c1fe

  0xffffff80131baf70: 0xffffff7f8e20b056

  0xffffff80131bb0a0: 0xffffff7f8dfaf82d

  0xffffff80131bb0c0: 0xffffff7f8dec95f1

  0xffffff80131bb170: 0xffffff7f8dec70fc

  0xffffff80131bb370: 0xffffff7f8dec8a4b

  0xffffff80131bb440: 0xffffff7f8f57a7aa

  0xffffff80131bb520: 0xffffff7f8f577a7c

  0xffffff80131bb5a0: 0xffffff7f8f578631

  0xffffff80131bb620: 0xffffff7f8f578e56

  0xffffff80131bb760: 0xffffff7f8f5798fb

  0xffffff80131bb890: 0xffffff7f8f5acbce

  0xffffff80131bb8d0: 0xffffff7f8f5ad923

  0xffffff80131bb910: 0xffffff7f8f5a734c

  0xffffff80131bba70: 0xffffff7f8f5a7c5c

  0xffffff80131bbab0: 0xffffff7f8f5a3213

  0xffffff80131bbae0: 0xffffff7f8f5863a4

  0xffffff80131bbb30: 0xffffff800d900d52

  0xffffff80131bbb60: 0xffffff800d901949

  0xffffff80131bbbc0: 0xffffff800d8ff0c3

  0xffffff80131bbd00: 0xffffff800d3e21e7

  0xffffff80131bbe10: 0xffffff800d33000c

  0xffffff80131bbe40: 0xffffff800d3149f3

  0xffffff80131bbe90: 0xffffff800d32531d

  0xffffff80131bbf10: 0xffffff800d4031ea

  0xffffff80131bbfb0: 0xffffff800d435396

  Extensions of core in backtrace:

  com.apple.nvidia.classic.NVDAResmanTesla (10.0) [796AE430-39FB-3255-8161-D52AFA28 EE2B]@0xffffff7f8de72000-> 0xffffff7f8e0dbfff

  dependency: com.apple.iokit.IOPCIFamily (2.9) [52E715FC-521D-3869-B2EA-5228FA4BEA34] @ 7f8db24000 0xffffff

  dependency: ffff7f8de62000 @0xff com.apple.iokit.IONDRVSupport (2.4.1) [C0B8A85D-B32A-3F24-B4FC-B62B3BBF9E57]

  dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [82EAD591-67E3-39CB-A232-A8095CA30E92] @0 xffffff7f8de1b000

  com.apple.nvidia.classic.NVDANV50HalTesla (10.0) [7FE40648-F15F-3E18-91E2-FDDDF4C DA355]@0xffffff7f8e0e6000-> 0xffffff7f8e38ffff

  dependency: com.apple.nvidia.classic.NVDAResmanTesla (10.0.0) [796AE430-39FB-3255-8161-D52AFA 28EE2B]@0xffffff7f8de72000

  dependency: com.apple.iokit.IOPCIFamily (2.9) [52E715FC-521D-3869-B2EA-5228FA4BEA34] @ 7f8db24000 0xffffff

  com.apple.GeForceTesla (10.0) [5D1B0BFD-2642-35FD-AD39-C0652DA082E8] @0xffffff7f8f 549000-> 0xffffff7f8f616fff

  dependency: com.apple.iokit.IOPCIFamily (2.9) [52E715FC-521D-3869-B2EA-5228FA4BEA34] @ 7f8db24000 0xffffff

  dependency: ffff7f8de62000 @0xff com.apple.iokit.IONDRVSupport (2.4.1) [C0B8A85D-B32A-3F24-B4FC-B62B3BBF9E57]

  dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [82EAD591-67E3-39CB-A232-A8095CA30E92] @0 xffffff7f8de1b000

  dependency: com.apple.nvidia.classic.NVDAResmanTesla (10.0.0) [796AE430-39FB-3255-8161-D52AFA 28EE2B]@0xffffff7f8de72000

  com.apple.driver.AppleMuxControl (3.10.22) [26F693CB-BFE8-33FA-9D1F-3F66FC016768] @0xffffff7f90041000-> 0xffffff7f90054fff

  dependency: com.apple.driver.AppleGraphicsControl (3.10.22) [61967104-88AF-3605-82F5-A480A280 0A78]@0xffffff7f90039000

  dependency: com.apple.iokit.IOACPIFamily (1.4) [70E2B65E-A91A-3522-A1A0-79FD63EABB4C] @0xfffff f7f8dda9000

  dependency: com.apple.iokit.IOPCIFamily (2.9) [52E715FC-521D-3869-B2EA-5228FA4BEA34] @ 7f8db24000 0xffffff

  dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [82EAD591-67E3-39CB-A232-A8095CA30E92] @0 xffffff7f8de1b000

  dependency: com.apple.driver.AppleBacklightExpert (1.1.0) [65E3187E - B-36E9-bi33-1B13ABB058 949, 1A]@0xffffff7f9003c000

  Corresponding to the current thread BSD process name: WindowServer

  Mac OS version:

  14D136

  Kernel version:

  14.3.0 Darwin kernel version: Mon Mar 23 11:59:05 PDT 2015; root:XNU-2782.20.48~5/RELEASE_X86_64

  Kernel UUID: 4B3A11F4-77AA-3D27-A22D-81A1BC5B504D

  Slide kernel: 0x000000000d000000

  Text of core base: 0xffffff800d200000

  Text __HIB base: 0xffffff800d100000

  Name of system model: MacBookPro6, 2 (Mac-F22586C8)

  Availability of the system in nanoseconds: 894932442532

  last load kext to 37260946047: com.apple.driver.AudioAUUC 1.70 (addr 0xffffff7f8f83e000 size 32768)

  Finally unloaded kext to 218866970274: com.apple.driver.AppleUSBUHCI 656.4.1 (addr 0xffffff7f8e6fa000, size 65536)

  kexts responsible:

  com.apple.driver.AudioAUUC 1.70

  com.apple.driver.AppleHWSensor 1.9.5d0

  com.apple.driver.AGPM 110.19.5

  com Apple.filesystems.autofs 3.0

  com.apple.iokit.IOBluetoothSerialManager 4.3.4f4

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.driver.AppleMikeyHIDDriver 124

  com.apple.driver.AppleMikeyDriver 272.18

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AppleHWAccess 1

  com.apple.driver.AppleIntelHDGraphics 10.0.0

  com.apple.driver.AppleHDA 272.18

  com.apple.driver.AppleHV 1

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  3.10.22 com.apple.driver.AppleMuxControl

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.4f4

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.driver.AppleSMCLMU 2.0.7d0

  com.apple.driver.AppleMCCSControl 1.2.11

  com.apple.driver.AppleIntelHDGraphicsFB 10.0.0

  com.apple.GeForceTesla 10.0.0

  com.apple.driver.AppleLPC 1.7.3

  com.apple.driver.AppleSMCPDRC 1.0.0

  com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

  com.apple.driver.SMCMotionSensor 3.0.4d1

  com.apple.driver.AppleUSBTCButtons 240.2

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1

  com.apple.BootCache 36

  com.apple.driver.AppleUSBCardReader 3.5.5

  com.apple.driver.AppleIRController 327,5

  com.apple.driver.AppleUSBTCKeyboard 240.2

  com.apple.iokit.SCSITaskUserClient 3.7.5

  com.apple.driver.XsanFilter 404

  com.apple.iokit.IOAHCIBlockStorage 2.7.1

  com.apple.driver.AirPort.Brcm4331 800.20.24

  com.apple.driver.AppleAHCIPort 3.1.2

  com.apple.driver.AppleUSBHub 705.4.2

  com.apple.driver.AppleFWOHCI 5.5.2

  com.apple.iokit.AppleBCM5701Ethernet 10.1.3

  com.apple.driver.AppleUSBEHCI 705.4.14

  com.apple.driver.AppleSmartBatteryManager 161.0.0

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleACPIButtons 3.1

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 3.1

  com.apple.driver.AppleAPIC 1.7

  com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

  com Apple.NKE.applicationfirewall 161

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

  3.10.22 com.apple.AppleGraphicsDeviceControl

  com Apple.kext.Triggers 1.0

  com.apple.iokit.IOSerialFamily 11

  com.apple.iokit.IOSurface 97.4

  com.apple.driver.DspFuncLib 272.18

  com.apple.kext.OSvKernDSPLib 1.15

  com.apple.driver.AppleBacklightExpert 1.1.0

  3.10.22 com.apple.driver.AppleGraphicsControl

  com.apple.driver.AppleSMBusPCI 1.0.12d1

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.4f4

  com.apple.iokit.IOBluetoothFamily 4.3.4f4

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.driver.AppleSMBusController 1.0.13d1

  com.apple.iokit.IOUSBUserClient 705.4.0

  com.apple.iokit.IOFireWireIP 2.2.6

  com.apple.nvidia.classic.NVDANV50HalTesla 10.0.0

  com.apple.nvidia.classic.NVDAResmanTesla 10.0.0

  com.apple.iokit.IONDRVSupport 2.4.1

  com.apple.driver.AppleHDAController 272.18

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.iokit.IOHDAFamily 272.18

  com.apple.iokit.IOAudioFamily 203.3

  com.apple.vecLib.kext 1.2.0

  com.apple.driver.IOPlatformPluginLegacy 1.0.0

  com.apple.driver.IOPlatformPluginFamily 5.9.1d7

  com.apple.driver.AppleSMC 3.1.9

  com.apple.driver.CoreStorage 471.20.7

  com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.5

  com.apple.iokit.IOUSBMassStorageClass 3.7.2

  com.apple.driver.AppleUSBMultitouch 245.2

  com.apple.iokit.IOUSBHIDDriver 705.4.0

  com.apple.driver.AppleUSBMergeNub 705.4.0

  com.apple.driver.AppleUSBComposite 705.4.9

  com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.5

  com.apple.iokit.IOBDStorageFamily 1.7

  com.apple.iokit.IODVDStorageFamily 1.7.1

  com.apple.iokit.IOCDStorageFamily 1.7.1

  com.apple.iokit.IOAHCISerialATAPI 2.6.1

  com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.5

  com.apple.iokit.IO80211Family 730.60

  com.apple.iokit.IOAHCIFamily 2.7.5

  4.5.6 com.apple.iokit.IOFireWireFamily

  com.apple.iokit.IOEthernetAVBController 1.0.3b3

  com.apple.driver.mDNSOffloadUserClient 1.0.1b8

  com.apple.iokit.IONetworkingFamily 3.2

  com.apple.iokit.IOUSBFamily 720.4.4

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.driver.AppleEFIRuntime 2.0

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.iokit.IOSMBusFamily 1.1

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 396

  com.apple.iokit.IOStorageFamily 2.0

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 3.1

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com Apple.KEC.corecrypto 1.0

  com.apple.kec.Libm 1

  com Apple.KEC.pthread 1

  Model: MacBookPro6, 2, MBP61.0057.B0C of BootROM, 2 processors, Intel Core i7 2.8 GHz, 2 GB, MSC 1.58f17

  Graphics: integrated graphics card Intel HD, Intel HD Graphics,

  Graphics card: NVIDIA GeForce GT 330 M, NVIDIA GeForce GT 330 M, PCIe, 512 MB

  Memory module: BANK 0/DIMM0, 1 GB, DDR3, 1067 MHz, 0x802C, 0x384A53463132383634485A2D314731463120

  Memory module: BANK 1/DIMM0, 1 GB, DDR3, 1067 MHz, 0x802C, 0x384A53463132383634485A2D314731463120

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 93), Broadcom BCM43xx 1.0 (5.106.98.100.24)

  Bluetooth: Version 4.3.4f4 15601, 3 services, 27 aircraft, 1 incoming serial ports

  Service network: Ethernet, Ethernet, en0

  Serial ATA Device: ST9500420ASG, 500,11 GB

  Serial ATA Device: MATSHITADVD-R UJ-898

  USB device: Hub

  USB device: Apple keyboard / Trackpad

  USB device: Hub BRCM2070

  USB Device: USB Bluetooth host controller

  USB device: Memory card reader internal

  USB device: Hub

  USB Device: IR receiver

  USB device: ISight built-in

  Crush Bus:

  You have the MacBookPro6, 2 - the Edsel of Mac. There may be the failure of logic-board that was covered by a recall program that is now complete.

  The model was abandoned in February 2011. From five years from this date, it will be classified by Apple as "vintage product." This means that Apple will refuse probably a maintenance action (see exceptions on the linked page.) In this case, you will need to go to an independent service provider. The part can be is no longer available, or the repair may not be profitable.

  An appointment of 'Genius' in an Apple Store, or go to a different service provider authorized, to have the tested machine. Diagnoses of current equipment used by service providers don't detect the fault. There is a specific test for the same problem that Apple calls "VST" (for "video switching Test.") Ask for it. A "Failed" result means that the defect is present.

  You may be quoted a price of about $350 (in the United States) for a "repair," which is to send the unit to a repair shop central and lasts about two weeks. For this package, found nothing wrong with it should be fixed, not only the logic board.

  Sometimes, the spare part is also faulty, so be prepared for this eventuality. If you decide to pay for a new logic board, rigorously test during the 90 day warranty on the repair. Some owners have reported that they went up to three replacement boards before you get one that worked.

  If you don't want to pay for the repair, you may (or may not) be able to work around the problem by disabling automatic switching graphics. To use the separate graphics processor, you will need a third-party utility to manually switch to him.

  Often, the problems start after an upgrade of the OS. If the upgrade has been recently, and you have backups, you can then go back to a previous version of OS X.

• Symbol of the missing volume

  The volume symbol has disappeared from the bottom left of the screen of my laptop so I can't turn volume up or down more.  Any suggestions?

  Hello

  1 Please reboot nothing so interfere with this process.

  Click with the right button on the task bar to Taskbar - Properties - tab - Notification area to customize the button-
  Tick Volume - if it is grayed out, then use this link. (Power supply, network and clock
  are the same).

  Windows 7:
  
  How to enable or disable Notification of Windows 7 system icons (there are several
  methods and you can have use all).
  http://www.SevenForums.com/tutorials/19085-system-icons-enable-disable.html

  How to turn system icons on or off in Windows 7
  http://www.SevenForums.com/tutorials/292-system-icons-turn-off.html

  Vista:
  
  How to enable or disable the system tray in Vista icons (there are several
  methods and you may need to use them all).
  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  Vista and Windows 7:
  
  If necessary: a Mr Fixit

  System icons do not appear in the notification area in Windows Vista or in Windows 7
  You must restart the computer
  http://support.Microsoft.com/default.aspx/KB/945011

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">