Restart Windows Server 2003

Similar Questions

• I'm looking for a batch file to restart windows server 2003.

  I tried "Shutdown - r-t 0 - m f------ but it does not work.

  These MS Answers forums are intended for the home rather than the it professional user. Please transfer your question in the relevant Microsoft Technet forum here:

  http://social.technet.microsoft.com/Forums/en-us/category/windowsserver .

  Thank you. :)

  (I'm sorry, but I can't move this thread for you because the two forums are working on separate platforms)

• Tecra A10 - 12O: installing the driver network card in Windows Server 2003 R2 Std

  Hello

  I received 6 laptop Tecra A10 - 12O, and we need to install Windows Server 2003 R2 Standard Edition with SP2 in all these six machines. Windows Server 2003 has been installed perfectly, but now we have only the network LAN card to work but we are unable to install its driver. When I installed Windows XP from the supplied DVD for Toshiba, it says Intel 82567V Gigabit network adapter. I tried to download the drivers for this adatpor of drivers Toshiba, Intel Web site, but it will not install in Windows Server 2003. I also tried manually force to choose and install a driver from the list, I choose that it will install but shows yellow question mark in Device Manager means that it does not work with this driver.

  I also tried the same Intel 82567V drivers from some sites non-Toshiba, of these models using the same network card, but is not truck drivers at all.

  I understand these laptop computers does not support Windows Server 2003, but these were ordered to be used as servers with Windows Server 2003 Standard Edition and I am required to make the Installer only with activated and installed network adapter.

  I try last week and exhausted all means to get the installed network adapter driver, but all have failed. Can someone please help with this? All support will be highly appreciated.

  Thank you.

  Charwal

  Hey Buddy

  If I m not wrong Windows Server 2003 uses the same drivers as Win XP and I guess that it s driver problem not a LAN, but perhaps also the problem of Windows Server 2003 installed.

  You are right; the LAN chip seems to be Intel 82567V and the LAN driver downloaded from Intel page should work 100%.

  In your case, I would recommend installing the chipset driver.
  Remove the LAN card from Device Manager, then restart the laptop.
  Then go back to Device Manager and update driver in pointing devices Manager to the place where the driver downloaded LAN was stored on the HARD drive.

• GPIB-USB-HS Windows Server 2003 driver available?

  I tried to install the GPIB-USB-HS device on our system of Windows Server 2003 R2 Standard 32 - Bit (German) with the last driver NI488.2 3.0 package.

  But the driver seems to be evil. After restarting Windows comes up with an error and event poster of the errors of several Viewer too:

  -The "nipxirmk" service failed to start due to the following error: the specified driver is invalid

  I think that the latest package isn't compatible Win Server 2003 but that it is announced at ni.com.

  Is it possible to install GPIB-USB-HS on a Win 2003 Server machine?

  Thanks for your help

  Kalize

  Windows Server 2003 32-bit R2 enables PAE by default ("physical address Extension") mode for addressing memory above the 4 GB limit.  National Instruments supports this operating system, it does not address memory above the 4 GB limit by using EAP setting and many pilots OR will fail to load if this setting is enabled.  (Note that your computer may intuitively put some of your memory above the 4 GB limit, even if you only have 4 GB of RAM).

  On Windows Server 2003, you can disable the EAP or prevent Windows to use addresses beyond 4 GB, which allows loading the drivers EITHER.  Please see KB 54D9I6M6: OR software failure when PAE (physical address Extension) is activated on Windows operat... for more information.

• My Windows Server 2003 Administrator password back to the old after reboot

  Well, it's quite strange and I think it affects my antivirus management. I can change the password using ctrl alt delete and it remains until I restart. When I reboot, it starts to complain that the new password I just. I can connect on the client with the new password I want to be, but he complains that the account must authenticate properly. I am at a total loss. Please help as I want to do out anti-virus for the client stations.

  Thank you internet.

  Leah

  Hello
   
  Your Windows Server 2003 issue is more complex than what is generally answered in the Microsoft Community forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Windows Server 2003 Forum. You can follow the link to your question:
   
  http://social.technet.Microsoft.com/forums/en-us/home

• Windows Server 2003 and MSXML 6.0

  I need to install MSOffice 2010 on a server that is running Windows Server 2003 SP2, unfortunately I encounter the error:

  The installation program is unable to act because of the following error:

  The installation of MSOFfice 2010 requires MSXML version 6.10.1129.0 to be installed on your computer.  Install this component and restart the installation.

  Fairly straightforward error message, I have so from Microsoft Core XML Services (MSXML) 6.0 Service Pack 1 and went to install this.

  Unfortunately, I encountered a problem when trying to install MSXML6.0, which is:

  This installation package is not supported by this processor type, contact your product provider.

  I guess I'm trying to use an incorrect version of the MSI, but I can't seem to find anything other than:

  msxml6_ia64.msi

  msxml6_x64.msi

  msxml6_x86.msi

  Who all seem to not what I'm looking for, I tried google MSXML 32 bit but without much luck.

  I was wondering if thing exists or if anyone has any advice that could help me please?

  Thank you very much for looking.

  Kind regards.

  Hello

  The question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:

  Office 2010 - planning, deployment and compatibility TechNet Forums

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Windows Server 2003 R2

  Windows Server 2003 R2 will not be stopped.  Restarts and does not give an error message when you try to run a stop automatically.   Have to make a hard stop in order to stop the server.  Any suggestions?

  Hi KrisRan,

  Thank you for visiting the Microsoft answers community.

  The question you posted would be better suited in the TechNet Forums for Small Business Server.

  Please repost your question here to get the best support.

• Windows Server 2003 - Error Codes: 0X800706BE & 0X800706BA

  I have a server with Windows Server 2003 Enterprise Edition custom which is made of multiple system errors of Windows Update Agent with ID 20.

  Here are some examples:

  Installation failure: Windows failed to install the following update with error 0x800706be: update Microsoft .NET Framework 3.5 SP1 for Windows Server 2003 and Windows XP x 86 (KB982168).

  Installation failure: Windows failed to install the following update with error 0x800706ba: Security Update for Windows Server 2003 (KB979683).

  In addition, there are 20 twenty updates that produce the total failure of the installation with the 0x800706ba error. The first installation of .NET framework 3.5 SP1 error is the only one with error 0x800706be.

  To resolve this problem, I did the following:

  Stop the automatic updates service, renamed Software Distribution files in C:\WINDOWS and C:\WINDOWS\system32, and then restarted again the automatic updates service.

  The same problem occurred (updates will download, but not with the error ID 20 system event) and so I did the same steps again and also reinstated the SOOPER services:

  1. run "gpupdate/force".

  2. run "/detectnow wuauclt.

  And once again, downloaded updates, but not settle and the recorded errors.

  What else can I try to get these updates installed?

  If the computer, in fact, update through Windows Update, post it here instead: http://social.technet.microsoft.com/Forums/en/winserversecurity/threads

  If, however, it updates via WSUS, post here: http://social.technet.microsoft.com/Forums/en/winserverwsus/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Txtsetup.OEM is not found in Windows Server 2003

  Hello

  I am currently installing windows server 2003 on a Server Blade. during installation, the error "txtsetup.oem be found" suddenly appeared on my screen after the server by copying the files into the drive and restart. so I can not proceed with the installation. Please please help me as soon as possible concerning this question. Thank you very much ~

  Hello

  I am currently installing windows server 2003 on a Server Blade. during installation, the error "txtsetup.oem be found" suddenly appeared on my screen after the server by copying the files into the drive and restart. so I can not proceed with the installation. Please please help me as soon as possible concerning this question. Thank you very much ~

  Hey Arief Syahril

  Here is the vista forums

  You should receive the help you need if repost you in instances of server via the link below

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb250589.aspx

  Walter, the time zone traveller

• Need driver Audio for Windows server 2003 for the INSPIRON 1545 laptop

  Hi all

  I need Audio and video drivers for my new laptop computer Inspiron 1545 laptop. It now supports drivers for Vista, XP and Windows 7 only.

  I installed Windows server 2003 to install SAP. But I am unable to get the sound.and not able to install video and audio drivers.

  Please help me how to get these drivers.

  Thanks in advance,

  Delphine.

  Delphine,

  This is how it was done before Vista. There could be a better way now.

  1 enable the Windows Audio Service. (This should already be activated in 2003 Standard Edition). For other versions:

  Go to start/run and type "services.msc" and press the 'Enter' key (or click on 'ok'). The Services window appears. Scroll down the page until you find "Windows Audio" to the bottom of the list. Double-click on it and change the type of startup to automatic, and then click Start, apply, then OK.

  2. download and install the Microsoft Windows Server 2003 KB901105 update from this page of Microsoft:

  http://support.Microsoft.com/?kbid=901105

  3. restart.

  4 install the audio driver for Windows XP. If you have trouble to install it using Windows XP compatibility mode.

  5. set the hardware acceleration DirectX:

  Click Start/run and type "dxdiag" and press the 'Enter' key (or click on 'ok'). Go to the Audio tab and move the slider to 'Level of hardware acceleration Sound' at full speed.

  (Thanks to kovacsAtTiLa of a site called west - wind.com.) He posted critical information, the link to the patch from Microsoft).

• BlackBerry Smartphones Blue error screen when the "BOLD" connection via port USB for Windows Server 2003

  I try to activate a new blackberry 9000 "BOLD", the first time I plugged the server he was immediately recognized and installed. I selected add new device of the user and the activation process started, but about 1 min in the activation I got a blue screen error stop 'driver of bugcode_usb.'

  After restarting the server I reconnected the "BOLD" to the server and once more Windows he acknowledged and began the installation process, this time however, the VM didn't pick it up and I had to click on VM > removable devices > usb devices to start the process of installing how he immediately provoked the stop error blue screen again.

  We run BES 4.1.4 on Windows Server 2003 in a virtual machine (VMWare 1.0.4) environment

  Does anyone have any suggestions? I don't want to plug it back for fear of crashing the BES server again.

  have you tried wirless EA?

• Windows Server 2003 STD Installation of PE 1950 freeze

  Hello

  I have a PE 1950 I'm trying to reinstall Windows Server 2003 STD. There a PERC 5 / i controller SCSI with a Raid 1 configuration. I've updated the Bios Dell 2.0.1 and the PERC 5 / i firmware to version 5.2.1 - 0067. I created and initialized from cd Dell Open manage Cd (V 5.2.0) and go through all the instructions. It copies the files from the Windows CD-ROM server hard disk, so he asked to restart. So I do, then the Windows installation screen rises, and the server hangs. The gray bar at the bottom of the installation is not upward to install a 3rd party SCSI driver. If I restart the server, it freezes again at the Windows screen.

  I ran an extented diagnostic systems on it, but she came back without error.

  I'm running out of ideas on how to get Windows Server 2003 is installed on this server. Ideas or comments will be appreciated.

  
  

• Installation of Windows Server 2003 on vmware workstation 9

  Hello

  I try to install windows server 2003 R2 x 64 edition as a guest OS on vmware workstation 9. But it gives me the time hard the same installation.

  First I had the

  "found no hard drives installed in your computer error.

  I was able to fix this by downloading it pilot vmware scsi. Now I get NTLDR is missing, restart the computer.

  
  

  I have install windows OS was frank. Anyone faced this problem. Please advise me? I have 2 CD (Cd1 and Cd2) of Windows server 2003 edition.

  
  

  Any help is appreciated

  
  

  Thanks in advance
  

  
  

  1 you shouldn't have to download all the drivers for the vHDD, as LSI Logic drivers are included in Windows Server 2003.  In other words, you have not selected correct SCSI (LSI Logic) controller.

  Now I get NTLDR is missing, restart the computer.

  Make sure that the disk is disconnected.

• Language in grayed when installed on the English version of Windows Server 2003

  Hello

  I have a problem during the installation of Adobe Reader software using the suite of packages:

  Turkish AdbeRdr1010_tr_TR.exe

  Turkish AdbeRdr11000_tr_TR.exe

  Chinese AdbeRdr11000_zh_CN.exe

  Chinese AdbeRdr1010_zh_CN.exe

  Greek AdbeRdr10110_el_GR.exe

  I tried to install their (a) on the Windows Server 2003 (English version). They install without error but when I try to launch them they come with the dialog box to select the English language and of required languages are unavailable / greyed out.

  (For the Chinese language I 'Control Panel > regional and Language Options > languages tab > install files for East Asian languages checked ').
  
  
  How can I activate these languages so that Adobe Reader software would result in the language that I need.
  

  Kind regards

  In the case where if someone had the same problem, here is a solution:

  Go to the window > Control Panel > regional settings > Advanced tab.

  Set the field under: "Select the language that matches the version of non-Unicode programs you want to use" to the language you want to use.

  Apply the changes.

  Windows may require a restart.

  Go to Adobe reader and in language settings, change the option to choose the language at the start of adobe.

  When you re-breakfast Adobe language you need should be available.

• Enterprize Manager installation on windows server 2003

  Hi all
  
  I have windows server 2003, oracle 10g 2 version is installed, but Manager enterprize is nonexistent.
  
  How I install Manager of the company without risk, without the need to restart the database?
  
  It's a production database.
  
  I need your help.
  
  Kind regards.

  Maahjoor wrote:
  Yes, I did, and it is said to be the last...

  services started successfully.

  now what?

  first of all, you need to start EM before (ab), you can use it.
  then why you depend on 'EM?
  EM has simply SQL for the lazy or incompetent.