Restarted my computor it goes to a black screen and wants to enter either windows vista or press f8 after you download updates from windows

Original title: when I grew my dell desktop computer up inspiron 530 and windows vista home it goes to a screen that wants to get me things I don't know what I have to enter secure mode or windows vista

I do not have ubdersand when my computor restars it goes to a black screen wants to enter or f8 for windows vista or press am I something wrong, after I check my restar updates too after that I think they are downloaded

Hi ISSYHenico,

1. you receive messages or error codes?

This problem can occur if updates failed to install.

2. are you able to boot into normal mode if you select Windows vista?

Method 1:

Step 1:

Otherwise, try to start in safe mode and perform a system restore and check:

Check out the link:

Start your computer in safe mode

http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

Step 2:

If you can start in safe mode, then you can try a system restore to a previous point where you have not experienced the problem.

Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

To run the system restore, you can consult the following link:

System restore

http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

System Restore: frequently asked questions

http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

Once you're able boot in normal mode, try the following steps:

Method 2:

Step 1:

You can view the history of update for updates failed which is causing the problem.

Check out the link:

See the Windows updates are installed

http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

Step 2:

You can try to install the updates manually from the Microsoft Download Center download and check if it helps.

Check out the link:

http://www.Microsoft.com/downloads/en/default.aspx

Hope this information is useful.

Tags: Windows

Similar Questions

  • At the start of the laptop goes to a black screen and says invalid partition.

    Original title: can I PRO 1-2cpu (IBM Laptop) Xp.

    • Not long I Formated my Windows XP PRO 1-2cpu, thinking that he would have run faster, not a blue screen crash and eliminate any viruses that could in fact, now that its formatted I can't use, whenever I start the laptop it goes to a black screen and says invalid partition, I don't know what that means though.

      so my question is there a way I can restore the computer back to normal? However, I don't have a recovery disk.

    A lot depends on how reformat you your hard drive.  Most manufacturers have a recovery partition on the hard drive that can be used to reinstall the operating system. Access you this by pressing a button that appears briefly at the beginning of the boot process.  If you have reformatted the drive c: partition only you might be OK and can get by using this recovery partition.  Otherwise, if you reformatted all the hard drive, then your only alternative is to get a Windows installation CD, boot from this CD and reinstall Windows.   Contact your computer manufacturer for advice.

    HTH,
    JW

  • my screen shows a black screen and says to enter the system password, how do I reinstall windows if the pc is back to factory settings and wonder a system password

    Don't let me do anything, as soon as I turn on my pc, it goes to the black screen telling me to enter the system password

    It looks like your BIOS password "may" be set.

    What brand of computer do you have?

    If you have an antistatic grounding cable and are comfortable opening your case, you "can" be able to follow a procedure in the manual of your motherboard to reset such password.   If you choose to do so, please be careful because you do so at your own risk.

    WARNING:

    This response comes with absolutely no warranty express or implied.  The author of this response in any way be held responsible for any financial or physical or emotional loss that readers might incur as a result of the advice of this response.

  • Windows did not accept the new updates and now still load with black screen and mouse rather than launch windows LOGIN


    Ideas: Troubleshooting/System Restore/Driver Updates

    • Troubleshooting took an installation point so-called drivers but never completed
    • System Restore worked initially but has now got to a point where he restores to where it will be updated and currently not load new windows
    • Recently replaced the hard drive in this laptop with a new copy of windows 7. Corresponding model
    • The only thing I have not tried is reinstalled, but then even if I did that would stop this from happening?

    ,

     
     
     
    First check to see if there are external devices attached to the computer, if so remove and check.
     
    Method 1.
    Let us run repair system at this stage, it might solve the problem.
    See the following articles for additional help and steps on startup repair.
    Startup Repair
    http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair
    Method 3.
    Step A.
    If the bows persists please verify if you are able to boot safe mode.
     
     
    Step B.
    If the problem exists not in Mode safe run mode startup minimum troubleshooting to find the root cause of the problem.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
     
    Method 3.
    I recommend you to restore system using a Windows 7 DVD.
    Here's how:
    To open the Options menu system recovery using a system repair disc or a Windows 7 installation disc
    If your system is damaged and cannot access the menu system on your computer Recovery Options, you can access it using the Windows 7 installation disc or a system repair disc previously.
    To use this method, you need to restart (boot) your computer using the disk.
    a. Insert the disc.
    b. restart your computer using the power button on the computer.
    c. If prompted, press any key to start Windows from the installation disc.
    o If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer.
    d. choose your language settings, and then click Next.
    e. If you are using the Windows installation disc, click on repair your computer.
    f. Select the Windows installation you want to repair, and then click Next.
    g. in the System Recovery Options menu, click a tool to open it and then choose the system restore and check.

     
    If we are able to boot to the desktop now, I would ask you install the updates one by one andcheck the update is at the origin of the conflict.
     
     
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • black screen and can't seem to windows.

    I always try looking for the answer to this one. It is the last line that appears when I try to start in safe mode. nothing happens and I can't go to the windows form:

    multi (0) disk (0) rdisk (0) partition (2) \windows\system32\drivers\mount mgr.sys

    Hi Retfry,

    What file you deleted accidentally?

    You are able to boot to one of the options to boot up in Safe Mode on your computer?

    If you are not able to boot in Safe Mode initialization options, you can follow this link & check if it helps.

    How do I recover from a corrupted registry that prevents Windows XP startup

    Hope the helps of information. Please post back and we do know.

    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Satellite A210 - 11 p - gos black screen and HARD drive does not

    Hello

    My Satellite A210 - 11 p suddenly goes to a black screen and the hard drive stops working. It is always under tension and if I want to restart I have to unplug the unit and remove the battery.

    I thought it was overheating and checked the time and they were really high in the 1980s. I took the fan and cleaned (very dusty) and the basic form of thermal paste. Temperatures plummeted now immediately but I still have the same problem, I updated the graphics driver and watched the temp on GPU (which is fine) but the problem is still happening. I used a number of programs to check for errors on the hard drive and no reported problems. I reloaded Windows 7 but still no joy.
    The problem seems to occur at any time and is not due to the execution of a given program, even just browsing with firefox

    Not too sure what to do and any advice would be welcome.

    Hey Buddy,

    > I reloaded Windows 7 but still no joy.
    Have you ever tried with Toshiba Recovery disk operating system?

    The Toshiba recovery disc there is an image of the settings from the factory with all the drivers and tools. If you install Windows on this disk, you factory back.

    That would mean if you have the same problem after the installation of recovery it s really bad hardware working because you have pretested settings of Toshiba. In this case an authorized service provider can help you make an accurate diagnosis what part is affected.

  • Windows 8 black screen and the cursor after the connection

    Hello. I tried to upgrade to 8.1 Windows 8 Windows and it is stuck on like 3% for one hour, so I just rebooted the computer and he returned to Windows 8. I'm going to sleep and come back the next day and go on my laptop and it auto connects me and it goes to a black screen and I only have the slider on the black screen after login. I don't see the start menu, but I receive notifications for as sticky keys or any other notifications lights. I turned off my computer at least 20 times, took out the battery, empty the battery and tried to boot in safe mode with no luck. It is unlikely that it is an internal problem, because if I leave my computer alone for a few minutes, my screen saver photos appear. If anyone can help me solve this problem or help me get in easier safe mode would make things less stressful. I have an Acer Aspire V5 - 571 series. Thank you.

    Hi Roy,

    This problem may occur because of corrupted on the computer boot files.

    I suggest you to perform the checking and automatic repair if this solves the problem.

    If you do not have a DVD of Windows 8, I suggest you check out the link to see how to create an installation of Windows 8 media:

    http://Windows.Microsoft.com/en-in/Windows-8/create-reset-refresh-media

    Follow the methods suggested below:

    Method 1:

    Start on the recovery environment using the installation of Windows 8 media.

    Follow the steps below:

    Note: before proceeding further, make sure that the boot priority is set on DVD drive in BIOS. BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    • Insert the DVD to install Windows 8 on DVD-ROM and restart your computer.
    • After you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.
    • Select the type of keyboard and good time.
    • Click repair your computer in the lower left corner.
    • Select Troubleshooting in choose an option screen.
    • In Troubleshooting screen, click Advanced options .
    • Click the automatic repair of the Advanced Options screen.
    • Then choose the operating system.
    • Windows 8 will then pick up questions on the hard drive and check that all required files are intact.

    If the problem persists, proceed to the next method.

    Method 2:

    Follow these steps to perform a system restore:

    • After you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.
    • Select the type of keyboard and good time.
    • Click repair your computer in the lower left corner.
    • Select Troubleshooting in choose an option screen.
    • In troubleshooting screen, click Advanced options .
    • Select System Restore.

    For reference:

    http://support.Microsoft.com/kb/2756559/en-us

    Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    Please let us know the results.

  • Satellite L350 - 170 Vista black screen and strong continuous beeps

    Since an update of windows who has not completed, the pc does not start.
    After the first page, it goes to a black screen and beeps very. I don't have a recovery disk when I bought the pc.
    Have tried with recovery Vista downloaded, holding the key F8, it happens where you can choose the repair of launch, it launches the application, but then after a few seconds it stops and starts beeping again.
    Is there a recovery cd (download) I can get for this PC and how to fix this?
    Thank you

    What happens if you try to start Windows in safe mode and delete update (s)...

    > Is there a recovery cd (download) I can get for this PC and how to fix this?

    There is no free download link, you can buy a [Recovery disk | https://backupmedia.toshiba.eu/landing.aspx] Toshiba you can also do a new install of Windows since Windows copy disk.

  • Windows 7 build 7600, windows 7 is not genuine. black screen and no internet connection. Help!

    Help, please. the lower right corner of the screen says windows 7 build 7600. Windows 7 not genuine. I have a black screen and I have no internet connection. Help, please

    Have you tried to restart by phone?

    Activate Windows 7 manually:
    1. click on start and in the search for box type: slui.exe 4

    2. press enter on your keyboard

    3. Select your country.
    4. Select the telephone activation option and brace yourself for a real person.
    http://support.Microsoft.com/kb/950929/en-us

    Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
    http://go.Microsoft.com/fwlink/?LinkId=52012

  • Satellite A100 system goes to a black screen after the recovery procedure

    I tried running the recovery CD, I received on my cell phone. the process perfectly, (I have only one CD, I don't know if I need a second). At the end of the process, I have the option to insert the second CD, or jump.
    Because I don't have that one CD I have support on ignore.

    I tells me that the installation is complete and I can restart my system.
    Then I removed the disk and I tried to reboot the system. The system goes to a black screen (on which he indicates that Microsoft load) and then crashes. That was the problem I was facing before recovery.

    Basically, the recovery process has not worked. I don't think I did something very wrong, unless I need a second CD. What could be the problem?

    Help me please!

    Hello

    The A100 is one of the new series of laptops and AFAIK the image of Toshiba was placed only on a CD (DVD) recovery.
    I think that the message and the possibility to insert the second CDconfuses a little.

    In my opinion the black screen and freeze has nothing to do with the recovery procedure and the new installation if Windows OS.
    Due to the fact that this problem has occurred until you have installed the OS from the recovery CD, I assume that there must be something wrong with the hardware.

    But it s very interesting to know if the same problem appears after the new installation of Windows from the original CD of Microsoft.

    It's worth a try.

  • MY COMPUTER DOES NOT START, NOT EVEN WHEN YOU TRY TO PUT IT IN SAFE MODE, EVERYTHING GOES TO A BLACK SCREEN, PLEASE HELP ME!

    OK, so last night, my computer was freezing up so I held the power button down to turn off, I turned it back and he asks me if I want to start in safe or just normally.  I chose because it starts as usual, it's just sitting there, it goes through the motions as it will start but it never does, I went to sleep woke up to the top and all I have is a black screen with mouse pointer again, nothing has changed, the same things happen when I try to start it in safe mode.  I tried to get the disks it is came up with, but the computer seems to not even acknowledge that they were never inserted, I don't know what to do, can anyone help me, I'm sitting here on the laptop of my bf and I am interested in this black screen with the pointer of the mouse in the Middle, I don't know what to do...

    Hello

    You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
    Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
    on devices and UNINSTALL - REBOOT.

    Another method to try to get to the desktop (try in normal Windows Mode without failure)
    CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
    on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
    by tapping F8 as you start several times.

    First check this thread in case it is simple and if not to come back to this thread.

    http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

    Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
    That there is no information on a black screen as it is on a blue screen just adds to the
    Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
    Google to see the proposed repairs, whom some have worked however these cover a wide
    field efforts.

    Here's a video of one of them.

    http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

    Here's another fix
    http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

    You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
    system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    You can create a recovery disc or use someone even version (making the system restore it)
    must be bootable).

    How to create a Vista recovery disk
    http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

    ------------------------------------------------

    These require the correct Vista discs since you can not start safe mode.

    Try the Startup Repair tool-

    This tells you how to access the System Recovery Options and/or with a Vista disk
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    Try recovery options Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    -----------------------------------------------

    Here are a few Google searches where many have found different solutions:

    Vista black screen - check that a 1st
    http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

    Vista black screen Solution
    http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

    Vista black screen Fix
    http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

    -----------------------------------------------

    If necessary and you can access all ordinary Windows.

    You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
    (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

    You can use another DVD that aren't copy protected but you you need to own
    Product key.

    On-site upgrade
    http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

    If nothing works, you can make a repair facility that must save the data but you will need to
    Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
    need to know your product Code.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

    How to perform a repair for Vista Installation
    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    ---------------------------------------------------------------------------

    Another method that works sometimes: at the command prompt, type of Vista startup disk:
    (a line type or copy and paste one line at a time and hit enter - enter a bracket)
    or "BOLD")

    c:

    cd\

    CD c:\Windows\System32\winevt (there is a space between cd and C :)

    Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

    RESTART Windows

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Equium P300-19O - black screen and does not restart

    My Equium P300-19O had a blue screen of death after a few accidents occurred due to a broken Windows media player which 3 safe resets and then I get a blue screen of death.
    I restart the laptop, but now I have past the toshibia load up, but do not get further rather get a black screen with a dash flashing in the upper left corner.

    Please suggest anything that could help me get the laptop again.

    Hello

    Have you checked if you can boot into safe mode? You can try to start in safe mode if you go into the advanced boot menu by pressing F8 after you have switched on the laptop. Here you can choose.
    Maybe you can also try a system restore to a previous state.

    If it doesn t work it should boot from the recovery disk Toshiba and reinstalling Windows.

  • Satellite - black screen and can't restart with the recovery disk

    I have a black screen and can not restart with the restore disc but it seems to be.

    I find this odd, I can't ask Toshiba direct on my problem, but I have to wait for one nature in the heart of my problem or give me a helping hand

    Hey,.

    This means that you can see anything on the screen of the laptop or only if you try to start with the recovery disk?
    You can start Windows or access the BIOS?
    You must post a few more details, otherwise we can t help you :(

    Furthermore, Toshiba is not your first contact, you should ask an authorized service provider. They can help you too! :)

  • My Satellite L505D goes to a black screen after startup

    It seems to boot up properly and everything. It starts Windows 7 and goes to the user selection screen, but since there is only 1 user, it only says: Welcome to the loading circle. But when he tries to load the page office or home or whatever you call, all that happens is the mouse.

    I can move the mouse normally, my anti anti-virus pop ups see the place if necessary. On my last attempt to try to solve the problem, I got my user to open the file, but has happened automatically. I tried taking the battery twice thing. If any ideas on why the screen just looks like a black screen and the mouse visible.

    PS: I use the keys ctrl + alt + del function to get these options appears.

    On this virtual path, it is not easy to understand why all this is happening, but what you can try is to start the operating system in safe mode and roll back the OS to an earlier time to see if it works.

    Can you please try this and post comments.

    Do as a first step. Later, we see what can be done.

  • When I try to reboot my laptop (toshiba Windows Vista) displays a black screen and now I can not it reboot. It says bootmgr missing. What should I do to restart?

    Can someone help me please! When I try to reboot my laptop (toshiba Windows Vista) displays a black screen and now I can not restart. It says systeminst9.wnm is missing. What should I do I restart yo?

    Hi Ashutosh,

     
    You did changes to the computer before the show?
     
    This error indicates that the boot sector is corrupted or missing.
     
    I suggest for the link and follow the steps in the article:
    Windows error message «Bootmgr is missing Press Ctrl + Alt + Delete to restart»
     
    Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
     
    Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

Maybe you are looking for

  • shaking tabs

    Because I downloaded the update to Firefox version, I noticed that whenever I have more than 4 tabs open the tab bar contracts and expands, which actually watch as she shakes. This makes trying to close tabs by using hard x key. If you have solutions

  • OfficeJet 6100: Black ink printing

    I have a yellow cartridge empty but want to print in black ink only 90% satisfied with my printing needs.

  • Uninstall browser extension party casino

    Impossible to uninstall an extension of the browser called PartyCasino, only the ability to disable

  • Unusable hardware device

    When I check my computer, I get the above message. It goes like eabfiltr. root\legacy_SASDIFSV\0000 It further States "device does not exist or does not." How can I get rid of this?

  • IP phone Agent in HA environment

    We have IPCC 4.05 has. To use IPPA in an environment HA will create 2 intellectual property services in Bishop's call.? 1 service pointing to each server? Or is there a service that can be used that will try a server then Server B? Thank you Trae