restarting my computer on windows xp load screen when I try to boot from the disc, I get a blue screen can someone help me?
Recently, I restarted my computer and received the following message is displayed:
"We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.
If your computer stopped responding, restarted unexpectedly, or was automatically closed down to protect your files and folders, select last good known Configuration to return to the most recent settings that worked.
If a previous startup attempt was interrupted due to a power failure or because the Power or Reset button has been activated, or if you are not sure what caused the problem, choose Start Windows
Normally.
Safe mode
Safe mode with networking
Safe mode with command prompt
Last good Configuration known (your most recent settings that worked) start Windows normally
Use top and down arrow keys to move the selection of your choice.
.
Seconds until Windows starts: 30 "
After I tried all the options available, but whenever I do it, windows is only a blue Flash of a screen and then brings back me to the same menu over and over again.
I can NOT CONNECT AT ALL even in safe mode (by connection, I mean I can't access the section Office at all - case im explained does not this right). as soon as it reaches the load to windows xp my computer screen restarts as if I am the ' turn off and turn back on.
I tried to perform a repair of Windows through my cd of instalation installation, but it just took me a blue screen saying there was a problem and he had to shut down to avoid damage. He also told me this: * 0x0000000a (0x00000002, 0x00000000, 0 x 00000018, 0x80819b92)
The computer is an emachine and was purchased at a walmart nearly 5 years ago and it worked fine until one day it started to do this. I can't access any of my files or anything. It must be a software problem, because since then I checked all the problems of material possible and found nothing. the result of this is that I can't use my computer. It is a desktop computer and was reliable until it happened. I'm not sure of the cause, and I think it's something wrong with the operating system. I have tried everything I know and need help as soon as possible.
Hi josiahgenesis,
· Have you been able to launch the repair facility?
Try the following.
Method 1: Try to select disable automatic system failure reboot from the advanced boot menu options to see if it helps.
Method 2: Check to see if the following is useful.
You receive an error message "Stop 0x0000000A" in Windows XP
Tags: Windows
Similar Questions
-
Please
Hello
Please, try the following steps:
- Uninstall Adobe CC (Creative Cloud help |) Uninstall the creative Office Cloud app)
- Reboot the computer.
- Install the latest Adobe Creative cloud version from the link: CC help | Creative cloud desktop
Kind regards
Sheena
-
When I try to boot from the rescue disc I get a blue screen
When Vista starts up, the first thing I see is a screen that lists resources conflicts w/pci bus controller... three or four conflicts on resources, I press F1 to continue, then the computer detects new hardware... 1 sm bus controller, but the computer can not drivers, peripheral pci, same thing, cannot find drivers... Manager of devices display problem with six cameras, sm bus controller, pci device, host ricoh 1394 controller, ethernet controller of broadcom 440-10/100, hyper graphics tunnel transport amd and via agp controller cpu. I thought to reinstall windows, since I can't find sm bus controller drivers, but when I boot from the rescue disc, after loading windows files, I get a blue screen. desperately need help. sedonatom
Hi sedonatom,
1 did you change on your computer before this problem?
2. What is the brand and model of your computer?
3. What is the error message true blue screen that you receive?
I suggest you run chkdsk from the Windows Recovery Environment and verify if you are able to start correctly on the desktop.
Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.one) to boot into the Windows recovery environment, you can follow this link:
Repairs to the system of Windows recovery environment
(b) to the Windows Recovery Environment command prompt, type the following command and then press enter on the keyboard:
CHKDSK [/ p]: [/ r]
Note: At first, try to run chkdsk/p & check if it helps. Later, you can run chkdsk/r.
Hope the helps of information.
-
When I try to print from photoshop cc I get the message "the instruction at 0xb660643f referenced memory at 0 x 00000006. the memory could not be read. I run on Windows using Intel (R) Graphics 4600 8.1. Can someone help me with this?
Hi Tanuj,
Thanks for your reply. The problem seems to be a damaged printer driver. I tried to print from my laptop computer rather than my PC and that worked OK. I downloaded the latest driver for the Epson 3880 but then find that the print spooler has become invalid. When I restarted the print spooler, everything worked again and I'm able to print as usual.
Concerning
Gordon
Gordon Gentles
-
Of failure, white screen MacBook Pro HARD drive try to boot from the external HARD drive
Hello
I have a 2008 Macbook Pro which is having some problems, I was able to fix them, but eventually the hard drive failed. I know that because at startup until it would have a white screen Uni (no logo) and you can hear a clicking on in the lower left corner. I thought initially it was a memory problem, but after opening and verification of memory, it's clearly the hard drive.
I solved this problem temporarily (until I can replace the HARD disk) by installing El captain on an external HARD disc and start from that. Here's the twist, I couldn't he can begin to El captain, I tried CMD + R, CMD + OPT + R, CMD + OPT + R + P and now shift. Everything that's happened would be that clicks would cease to release the keys.
I left the macbook on while I'm at work, when I got home it was on the screen to connect the external HARD drive.
I accidentally closed the macbook yesterday and again once when I tried to log on, I could not and I left it on a white screen while I was sleeping. There is a possibility that he may have launched from the HARD drive when I get home, but if not, is there something that escapes me to force do this?
See you soon
Usually start up to a blank screen without the Apple Logo, may report one of the following:
- Hardware failure
- Boot drive is not recognized as valid and updated updated
- OS X essential software is missing, hurt moved or renamed or corrupt
- A firmware update is necessary
No matter who, in order to boot from an external drive "bootable", you would normally hold down the Option key until you get a screen that offers a number of devices to try to boot from.
Alternatively, you can try holding down the C key to try to boot from the external drive.
If none of these startup options work, then the bootable disc or the USB port on your MacBook Pro can be the question.
Since you have a Mac pre-2013, if you hold down the D key while booting, the built-in Apple Hardware Test should start up. This can help to identify hardware problems.
-
I need to uninstall the iTunes 12.2.0.145 in Windows 7-32 bit, but I don't have the installation of this version files. Can someone help me, please?
The problem lies in a PC with Windows 7 32 bit
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.
More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.
Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.
TT2
-
Wireless connections
I upgraded my dell vostro laptop 1000 Windows xp to vista and now I can not find wifi or when I try to connect to the internet I get an error, "a cable is not plugged into the card network", "connection to the Local network. Everything worked fine until I upgraded. I noticed in my device manager, the driver for the system controller and core network are not installed. Could it be the problem? Is someone can you please help me understand this?
Hello
I noticed that you had created another similar to this question. Have you tried the steps suggested in this post?
You can also try the following methods and check if it helps.
Method 1:
Update a network adapter driver.
Method 2:
Troubleshoot network adapter problems.
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems
-
My son tried to update the OS and now it will not be in service in any OS. Does not see the hard drive. But after the spin cycle for more than an hour, it goes into the black screen Darwin/BSD (my-name - Computer.loca) (console)
Login: IOATAController buses blocking device.
I tried to boot from the OS disk and may not see the hard drive to load to. I even used disk utility to erase all hoping to make just a re-install.
Did he talk about Darwin?
Also do not know if she had 10.2, 10.3 or 10.4 charged thereon.
If the HARD drive is not visible in disk utility, then he is dead and must be replaced. When you start the computer to the disconnect is that the operating system cannot find a reader from which to load the OS. The last iBook G3 came with 10.4.11. The first iBook G3 came with 10.3.9. Many models of iBook G3, so I don't know what version of the OS is the minimum requirement for your.
-
error message when you try to print from the windows photo gallery
I can't print the Windows Photo Gallery photos: failure of the Document to print - load plain paper. I reloaded paper, updated printer drivers and called Dell technical support, who said it was a software isue since I can print other documents as well as photos from Photoshop Elements. I get the same message when I try to print from painting and the image viewer. Looks like a problem of microsoft.
My printer is Dell V515w and is 4 months old.
Even if I can use Photoshop Elements, it is easier to use the Windows Photo Gallery. Any ideas?
Thank you
Richn13Hello
See this link:
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/unable-to-print-only-one-page-in-a-multiple-page/737b4afc-0D0E-4cb8-8374-f6de218720b2Let us know if it helps.
-
get the message according to which windows cannot update and when I try to update keeps the search
get the message windows cannot update and when I try to search for updates, it maintains the search but nothing happens
How to reset the Windows Update settings?
http://support.Microsoft.com/kb/971058If not post back with more information.
-
Hello
Need help... When you try to make a Photo montage I get an error "not available for the creation of valid size.
Photoshop Elements 11, Windows 7 PC.
Thank you
-
I was recently given an older laptop. I have windows XP Home Edition SP2. When I try to update windows, update web site scans my pc and says I need to install SP3 to update other windows. It downloads, but it starts to install, at Midway, the PC shuts down. When I power backup, windows starts to load, but discounts can go back every time. Only way I can get windows to work again is to join the conservation program and windows restore to before sp3 install atemp. I discovered that I need to install microsoft .net framework 2.0 SP2, but as it tries to install it, it stops and gives me an error code 1601. What is the problem and what can do to reslove? I don't know any history of what has been done until I got it. I know it works, but without SP3 and needs updated to work correctly. What can I do?
Hello Chris3535,
Welcome to the community Microsoft and thanks for posting the question.
According to the description, it seems that you are having problems with Windows XP Service Pack 3. As I understand it, you cannot install Windows XP Service Pack 3.
Step 1: check first pre - it not to install Windows XP Service Pack 3
Steps to take before you install Windows XP Service Pack 3
Step 2: Perform the steps in the link and check.
Meet us if you encounter any problems during the Installation of Windows XP SP3. or any other matter of Windows and I would be happy to help you.
Good day!
Hope this information helps.
-
The error I get now is error 1706: Setup cannot find the required files. He sends me to C:\Program Files\Microsoft Office\OFFICE11\1033\SETUP. CHM - a file that does not exist on my computer.
During the update process, I kept getting messages asking the CD, I just enter the 3 recorded updates through, and each "failed".
Hi Scootd28,
Thank you for using the Microsoft Forum.
The question you have posted is related to Microsoft Office, and would be better suited to the Office Discussion groups. Please visit the link below to find a community that will provide the support you want.
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspxHope this information helps
Thanks and greetings
Aziz Nadeem - Microsoft Support -
Have a laptop with the Windows Vista operating system. After an automatic update of 3 steps software, I had sound.available and can not hear anything when I use Media Player. I don't know how to get the sound to my laptop. Can someone give me some advice on what I can do to get
my sound back on my laptop?
Thanks for your help, I appreciate it.
Rmartinehp
Hi rmartinehp,
Thanks for posting your query in Microsoft Community.
I understand that you are facing the issue with sound, after the automatic updates, you have lost the sound.
Before you start the troubleshooting steps, I need the information required.
1. this problem occurs with particular application?
2. (http://windows.microsoft.com/en-US/windows7/Back-up-the-registry)
I suggest you to see the links and check.
No sound in Windows
See also:
Tips for solving common audio problems
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
-
I have a laptop Lenovo who was my daughters. I use it very well, but I can't figure out how to get Outlook Express on it as if I had on my old office. So, I was looking for how to do that I have seen that this version of Windows XP Professional SP3 won't be supported by Microsoft and should be updated but I do not understand what it is or what I need to do. It says I need to download the risk mitigation: Why stick with XP is a bad idea, but I'm afraid that download because I don't know what this means. Can someone please help me understand what I need to do so that I can use this computer to keep in touch with my daughter and son through Outlook Express electronic mail?
You don't need to upgrade. XP SP3 will be supported until April 2014. After that, there will be no more patches or updates, but work remains. There are still a lot of Win98 users out there.
Maybe you are looking for
-
Satellite P870 - 32 c - guard Wifi disconnection win 8.1 64 bit
Hello My wifi guard disconnection when downloading something like a file of several big Mo.Just browse the internet fails (problems), but downloading a file zip for a driver or something or using Usenet warning disconnect the wifi. Chrome tells me th
-
void / buttons vi of the single of structure event during the first round.
I have a project that contains separate programs. In the past (for 15 years), I develop a 'main Menu' which uses a structure of producer-consumer (events). The user selects "Program 1" says event loop of consumer to open "program 1". Program one open
-
Password PC on ipad suddenly due to problems related to the internet on the desktop
I had problems with the internet connection on my desktop. I'm finally back, but now if I want to connect to the internet on my ipad it asks password for PC which he has never done before. I don't know any password PC and now cannot get on the inte
-
Movie Maker in Vista is only to watch boxes 4 green and purple
Original title: my career in game - NEED HELP from WINDOWS MOVIE MAKERI have windows developer and I love using it and is very useful, BUT recently im trying to make my bmx video edit and going to use it to try to get offered and took at least 6 hour
-
I need hot difficulty (KB973208) 285499 and 291605 hot trouble (KB975163)
I need hot difficulty (KB973208) 285499 and 291605 hot of difficulty (KB975163) for a Vista 32 - bit Home Basic PC. When I enter my email and the captcha, I get an email with the zipped file and a password. The password never works. We receive thi