Restoration incomplete

Similar Questions

• HP restore incomplete error

  I tried to do a Minimum of Image recovery, but it keeps failing at the end of the process. It only gives me incomplete restoration

  on the recovery time I disconnect all devices and on wireless

  and steps go all the way, show 'Recovery preparation is finished', then press 'continue' button to reset the laptop and upcoming windows then I got the incomplete restoration

  my laptop model is-online pavilion dv6-2300

  under the images show all the steps:

  How to fix?

  

  

  

  

  

  then reset and got the error message

  

  Hi David
  I does not work try your last answer because my problem solved
  I create a post for this problem that your prior posts and my actions
  resolved is =>
  (Close the notebook. Tap away at f10 you start Notepad to open the menu of the bios. Under the Advanced tab or diagnosis)
  1: disk hard main self-test
  2: memory test

  3: wipe your hard drive with the drive to kill follow the description
  (
  Download and install Killdisk on the link below - (this application will write zeros to the entire disk and not affected your hard drive).
  
  http://Software.LSoft.net/KillDiskSuiteFree-Setup.exe
  
  Download and install ImgBurn on the link below.
  
  http://download.CNET.com/ImgBurn/3000-2646_4-10847481.html
  
  Access the application of disc kill you have installed in all programs, open the main folder, then select Bootable Disk creators, then the BACK Bootable CD Creator that will burn the ISO on a blank CD bootable.
  
  During the following process do not worry about all warnings as your recovery DVDs will reformat the HARD drive.
  
  Insert this CD into your laptop and restart to boot from the CD of Killdisk and follow the instructions on the screen to kill disk.
  
  A brief description of the process here is Killdisk.
  
  Use it to wipe the entire hard disk, highlight (80 h) and press f10 (you will also need to type a confirmation and press enter) - (this will make sure that you include all partitions and then start the process - this may take a few hours!).
  
  When the process is complete go on 4: step
  )
  4: full format your hard drive again and allocated to your hard drive
  5: reset and press f2 and smart self test and full auto retest your hard drive
  6: try again minimized installation

  very very, can you help me to solved restoration incomplete error
  I have Bravo all your messages
  Thanks David

• HP Envy m6-1178sa restoration incomplete

  Model: HP ENVY m6-1178sa

  Product number: C2C18EA

  OS: Windows 8

  I was faced with a problem with my installation of Windows and it seemed to be a problem with "KERNELBASE.dll. I was told that I should be reformatting my laptop so I have, using the recovery partition (I pressed F11 at startup and chose the minimized System Image recovery).

  The recovery process seems to operate normally, but in the end that it connected me on one account labeled 'Administrator' and said that the restoration is incomplete. I opened the newspaper and everything was going well, apart from that:

  [RegistryDevicesCheck]

  Result = FAILURE

  DEVICE FAILED #0:

  Description: USB - IF xHCI USB Host Controller

  PNPDeviceID: ROOT\UOIP_BUS_DRIVER\0000

  Code                    :   [ 31 ]

  And then he said he ran the PININST (Mini-FBI) going on, and then it displays a list of log files that were the result of "SUCCESS."

  How to turn off the phone and restore it to its normal operating state?

  Press and hold the power button until the laptop turns off.

  Restart the laptop, press the F10 key to enter the BIOS. Change the year in the BIOS for 2012. Save & Exit. Try to begin again resumed by tapping the F11 key immediately after starting.

• DV6 7200ee desire: restoration incomplete error

  I repeated it for my laptop and I have this problem (Recovery Manager window appears with the following error message when I click on the Details button):

  file ctoerror. FLG
  
  [21:12:12.07] ChkErrBB.CMD: detect an error in the PININST_BBV.
  [21:12:12.07] ChkErrBB.CMD: check c:\system.sav\logs\BurnBootWarn.log
  [21:12:12.07] ChkErrBB.CMD: or, visit c:\system.sav\logs\BurnBootMerge.log
  [21:12:12.08] ----------------------------------------
  [21:12:12.08] critical error condition has been detected to BBV1...
  [21:12:12.08]
  [21:12:12.08] see the following text of the file if it exists.
  [21:12:12.08] - c:\system.sav\Logs\BurnBootWarn.log
  [21:12:12.08] - c:\system.sav\Logs\BurnBoot.log
  [21:12:12.08]
  [21:12:12.08] Switch to 2ndCap WinPE and the show [Recovery Manager] incomplete dialogue.
  [21:12:12.08] because the dialogue of RM cannot appear on the screen [start] on Win8 environment.
  [21:12:12.08] customer may not notice that RM already shows the error dialog box.
  [21:12:12.08]
  [21:12:12.08] ----------------------------------------
  There might be an unexpected reboot during the PBO clean or last...
  The process will cause panic CTO because the image isn't normal...

  Please help me to restore my windows again!

  TitoNabil wrote:
  If its noway my windows again...
  
  Please help me...

  I did exactly that.

  Have you contacted HP at the URL I provided in my previous answer?

  To fix what you've done for yourself, the less expensive is to contact HP and order a restore for your laptop USB.

• System Restore: restore incomplete, your computer cannot be restored

  When I run the system restore, it goes really fast.  Then when the computer is restarted, the said dialog box: incomplete restore your computer cannot be restored: regardless of the restore point I had chosen.  No changes have been made to your computer.  To choose a different restore, restsrt system restore point.
  You can give me any help will be greatly appreciated, thanks again.

  Troubleshooting in Windows XP system restore
  http://support.Microsoft.com/kb/302796

  or http://bertk.mvps.org/html/error.html

  Everything you wanted to know about SR - http://bertk.mvps.org/index.html

• System Restore error: "Restoration incomplete will not be restored" < date I'm going >.

  Original title:

  I can not get the system restore to run even in safe mode. When restarts windows, I get the message "incomplete restoration cannot be restored" date I'm going home. Can anyone help?

  Try to configure Windows XP to start in a "clean boot" State, and then try to perform the system restore.

  How to configure Windows XP to start in a "clean boot" State : http://support.microsoft.com/kb/310353

• J2S63EA #BH5: Watch restoration incomplete error and does not start

  Some of my keys were not working nd varies touchscreen
  I decide to use Recovery Manager to reset the default system
  I waited for the sytem finish restoration
  It boot after auto restart
  It shows no logo
  then watch date th hour almost immediately the
  Go Manager recovery Windows telling me restoration is not complete
  that I should choose between saving the details of the log and try again
  Click try again without success
  It starts not far from this point
  pls help
  This is my new laptop go and is not yet nearly a year, my father, it has for me

  Try the trick here:

  http://h30434.www3.HP.com/T5/notebook-recovery/HP-envy-TouchSmart-17-recovery-incomplete/m-p/4760233#M65038

• Restoration incomplete background in the foreground

  Hello

  I use the method suggested here

  http://supportforums.BlackBerry.com/T5/Java-development/auto-start-and-RuntimeStore-usage-for-UIAppl...

  for transitionening of foreground to the background to the foreground. I noticed on os6 it worked very well. On os5 I often see that the restoration is incomplete! This means that some fields have become null! More specifically, I have 3 editFields (static), they just return null. Is - this unwritten rule that the user interface must be re-created each time and we shouldn't assume that the UI widgets would survive the transition all the time?

  Thanks for your comments.

  I use Eclipse with jre 1.5 and 5.0 plugin.

  I have found the problem. I was doing something dubious and the updating of the UI widgets without eventlock. Tests to see if this removes the problem. I also removed static - lying areas of the problem.

  Still welcome any additional info, if someone has.

  THX

• HP Envy 17-J113TX: incomplete restoration

  After having many problems of serious computer I think to be a fault of the user, I decided to do a factory reset. I opened upward the HP's Manager and asked him to reboot to the Recovery Manager. I have selected the minimum image recovery and let it do its thing.

  At one point, he said "Restoration incomplete", with the following log:

  [17:56:01.30] ChkErrBB.CMD: detect an error in the PININST_BBV.
  [17:56:01.33] ChkErrBB.CMD: check c:\system.sav\logs\BurnBootWarn.log
  [17:56:01.33] ChkErrBB.CMD: or, visit c:\system.sav\logs\BurnBootMerge.log
  [17:56:01.33] ----------------------------------------
  [17:56:01.33] critical error condition has been detected to BBV1...
  [17:56:01.33]
  [17:56:01.33] see the following text of the file if it exists.
  [17:56:01.33] - c:\system.sav\Logs\BurnBootWarn.log
  [17:56:01.33] - c:\system.sav\Logs\BurnBoot.log
  [17:56:01.33]
  [17:56:01.33] Switch to 2ndCap WinPE and the show [Recovery Manager] incomplete dialogue.
  [17:56:01.33] because the dialogue of RM cannot appear on the screen [start] on Win8 environment.
  [17:56:01.33] customer may not notice that RM already shows the error dialog box.
  [17:56:01.33]
  [17:56:01.33] ----------------------------------------
  There might be an unexpected reboot during the PBO clean or last...
  The process will cause panic CTO because the image isn't normal...

  I googled a bit, try alternatives, including the restoration of the default BIOS settings and set the time to the year 2012, and perform a hard reset. No solution worked.

  I have no recovery disks.

  What are my options? And this sounds like something that the computer must be returned under warranty?

  Thank you.

  You should not enter the activation of license key Microsoft Windows 8.1.

  It is coded in the BIOS and the operating system should operate when you connect.

  Make sure you that you install the version of Windows that your laptop came with. Otherwise, there could be a problem of activation.

• Pavilion x 360: Recovery Manager / incomplete restoration; Error of CTO

  Hello folks...

  Ok.. so... Last maybe ish around Friday, I managed to get some kind of virus/malware which took over.  Tried to remove anything but simply opted to do a reset via the useful HP Recovery Manager.

  Everything was fine until the end and he said that it has failed or something (if there are several days)... Would recover to zero the system (if this is important).  Whatever - he said it has failed, you need to restart, click 'ok' and it was then that he would not start.

  Just saw the logo screen HP, circles bit twirly, screen becomes black, gray and starts with the HP logo screen again and again. Made this for a few hours and finally just stop it completely.

  I went into the start menus, ran tests (HARD drive, memory, battery, motherboard, etc.) and everything is in working order. Run try to reset the computer to factory settings... 1/2 day later, it ends upward (I see the office during the final stages) and then all of a sudden I get the «restoration incomplete - save log/details/try again»

  Product Version information: 1.1530.23.0 # N5R10UA #ABA

  Details: Unexpected reboot during [installation procedure for Windows} will cause panic CTO because the image might not be normal now.

  Retry does nothing except continue the incomplete screen.

  Tried the BIOS to 02/01/2014, 02/01/2013 including some messages/support pages suggested.

  At the end of my tether.

  The partition is the same as Recovery Media - but in case of corruption or hard disk failure, you will need a recovery media to boot from.

  Fill a case of pension guarantee on the page here. They should take care of you without delay:

  https://support.HP.com/us-en/contact-HP/product/HP-Pavilion-11-K100-x360-convertible-PC/8499314/model/8961275

• Pavilion dv6 3015sa: incomplete error on restore in recovery through recovery discs

  Hello

  I have a pavilion dv6 3015sa and since I bought it, I have the recovery disks. now I want to recover my original win 7 and its drivers with his records, (I have no installed win now) I go through its process and I put all 5 lights up disk in the drive and the recovery process. When it is finished with discs, asks me to remove last disk and click on continue (and I do)

  After this system charges with no disc in the drive, but after a few seconds it stops with this error: "Restoration incomplete" and it has 3 options which nobody works. but when I press RETRY its tells me insert recovery media and I insert it, it restarts, but comes back with the same error this time when I click on start AGAIN, he said "a file without a name is not found" no matter what disk I insert. I tried so many ways, but nobody is working, I did these things:

  1 wipe the entire disk with Paragon (and I formatted the disc after that) (shoudn't I format the drive after?)

  2. turn the defult Bios (my version of the bios is F.27)

  3. remove the disc quickly before restarting

  Please help me, what should I do?

  This question seems unsolvable!

  Thank you since it is a very strange problem, nobody answered me, I fixed it by the following process:
  1. I rewiped the entire disc and formatted, it
  2. I changed the date of the bios in 2012 and he's fine now I'm back to the original win 7, the performance of my pc now are really good and does not to overheat again and I rarely hear fan noise!

• Desktop appears again without any data. System restore fails to «incomplete system restore»

  Original title: System Restore failed

  My computer turns off on its own yesterday. After the reboot, my office was back to default settings. Everything that I had stored on the desktop disappeared and I also lost all my favorite places. I tried restoring the system using different dates but it said system restore incomplete. I've lost everything?

  Hi mike,.

  ·         Have you received any messages when the computer starts very well?

  ·         Your data is also missing?

  ·         Do you have any other user accounts on the system?

  Step 1: Try to start in last good known Configuration and see if you can start very well.

  How to start your computer by using last good known Windows XP Configuration

  Step 2: Start the computer in safe mode and check the number. Report of the results.

  See also:

  Abnormal termination can affect the system restore

• Incomplete restore HP ENVY Ultrabook 6-1111tx

  Hello

  I had created a recovery USB and when I need to use it, it seems not to be working 100%. Reset complete fatory gives me the "Restoration incomplete" screen with some newspapers on

  ChkrrBB.CMD: DETECT ERROR SOME FOR pinist_bbv.

  etc. (see photo)

  

  Hi res link here

  When I reset it with 'reduced Image' works fine, well after the second time, he did.1st time he stopped at a login with an account screen admin that has been disabled. He worked the second time around, no partition recovery (from Corsica) and my c: is only 80 GB (500 GB HARD drive installed) with 10 GB remaining after completion. (Which I'm sure I can go up to the unallocated space)

  All begin just because I needed to get out the hard drive.

  I just want to know if my USB could be the problem? I did all the memory and hard drive tests and happened.

  I would also like to know how the provider a set recovery for my laptop in Asutarlia?

  OK, the full restore worked perfectly. I've done this process several times and his work perfect every time.

  Read and understand all the points before attempting this method.

  USE OWN RISK.

  In order to re - cap...

  1, remove the instrument msata

  2, use the recovery disk to restore windows 8.

  (If it still does not work it could be other factors.) Most likely the recovery media. My PC has completed the restoration as soon as I removed the msata device)

  Options:

  If you can not always start the cause of the computer there is an error as "0xc000001" go to option 3

  If the computer starts and you want to re-enable msata cache go to option 9.

  3, once the restoration is completed the legacy of save and exit bios set. (Cd or usb) boot partition Creation Wizard.

  4, once the agenda fully insert the msata device (do not close down)

  5, select file, refresh

  6, select drive msata, delete all partitions, create a new partition, the file system: fat32 or ntfs. Then press on apply.

  7, reboot and eject the Partition Wizard

  8, enter bios, Disable legacy

  9, enable Intel rapid boot in the bios. Save and exit

  10, Windows should start now. Install the Intel Quick Start technology software

  11, Execute and go to the acceleration tab, select Enable, leave all the default settings

  12, finished

  It took me 4 days to come with this method. I hope this can help someone else out there.

• Is there a known conflict when using Firefox 3.6 and Norton Security on Windows XP, which could lead to the restoration of Windows Progrsm unable to return the C: drive to restore points?

  It happened once that shortly after Firefox the default browser and I could not have restored functional, even after disabling restore on all drives, restarting and creating a manual restore point. I then did a clean install of Windows XP and found a functional restoration. On several occasions after reloading I tested all restoration programs and it worked normally. Now, two weeks later he did it again. I wonder if it might be Firefox or Norton.

  Yes, it's a known conflict of Norton.

  1. "Norton 2006 and later products have a safety feature that prevents outside programs from making changes to the Norton product.» This security feature can prevent the Windows system restore from changing Norton files, resulting in the "Restoration incomplete" message

  Temporarily disable the Norton product protection before running the Windows system restore. »

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  2. you can also see here for more details: http://service1.symantec.com/support/nav.nsf/docid/2001012915055706

• Pavilion g4-1117DX: fail to complete the restore of HP. Error mess - 'Error of CTO Flg' + ' [205] UIA writing failed 3 times!

  After failing to recover my system from hard on the D-disk partition recovery software, I bought HP Recovery disks from HP support turned on the PC and installed the first disk according to the instructions. I also pressed ESC on powerup and then selected F9 to boot from the DVD. After 5 minutes of access to records of HP recovery in the DVD player, an error message led indicating that "HP restore incomplete". I looked at the details of the error and showed an other error message stating "[205] UIA writing failed 3 times! In any case I try to do the PC recover either by the recovery using the HP Recovery Manager Software Manager & recovery on the drive partition hard D or using the HP Recovery DVD s I get two ways the same 'error CTO flg' + ' [205] UIA writing failed 3 times. Anything else that can be done, please?

  Thanks for the reply. Since I posted my problem on this Forum description, I worked directly with the HP Support and finally concluded that I have needed to push the F9 key button immediately that the PC has been poweringup. Do this correctly then leave the HP recovery disks provided (I bought them from HP) be read by the system and recovery properly executed.

  But it shows there is some question buggy with the test drive HP I ran several times and each time has shown an error message of hard drive with result [305] and also [303] - that led me to that almost an expensive for a 320 GB hard drive HP replacement purchase.

  Fortunately HP support people were so full with me and kep remember to follow-up with me to see how I was doing and then I got my laptop HP back from work. otherwise I would have made a mistake and installed the third disk, driver HP disk - and his great work now faster than ever.

  Thanks Hewlett Packard.

  Actually, I was aware of this type of support for HP since the 1970s, when I buy and install servers HP A2100, then servers HP 1000 HP 9000 server, and I have met and had presentations from the team of engineering and management in California from HP this for me and my boss the next type of systems that HP grew for the future and then the HP - DEC ALpha - all this for machinea the best range of computers with the best support for ground control systems (GE Americom in time) operating a critical General Electric fly over most of the commercial SATCOM satellites in the United States.  Even if I quit this job just now, HIS AMericom always uses HP to fly to the top of 20 + satellites over the United States and around the world.

  Shows just why HP is the longer computer company and will continue to be!

  My support case number was 3013351909 so that whoever the Lady of HP support could get credit for its excellence and how she persisted on its initiative of checkin continuously with me and guide me and helped to stop me from buying a disk hard when I didn't need to.

  Thanks HP and what concerns the life long realtionship with me!