Restoration of 2 8 black

I need clear all of my black 2. When I bought it, I moved the files to an external hard drive recovery. Now, when I go to the recovery boot from it nothing happens. I tried power - more volume to the key and also directly in recovery options. Nothing starts from the external drive. Any help thanks.

I hate to say it, but remove the cover was the first mistake. How will I know? I did it with my laptop and could never restore, even if I followed all the msoft offers of manufacturing steps that recovery drive and remove the internal. Lies, lies and * beep * msoft.

OK, when you use the Start/button you get to the BIOS page?

If Yes, click on the BIOS Setup. Then the 'Configuration' tab at the top of the screen.

Look down the list and see "Secure Boot" and turn it off.

Click on the 'Exit' at the top, do not use the 'exit at the bottom of the screen box.

Press 'Save changes to output' and then click 'yes '.

Let the thing for a few minutes - really! Is to make stuff in there, and you can not see, then let him finish.

Set the disc with the OTG cable.

Switch (start/high) BIOS Setup again and type "Boot Menu" which should then show the recovery disk to boot from.

If it works, you must restore the "Secure Boot" on before restarting the black with the recovered BONE...

Otherwise, I think it will be a trip to the shop for black. I do not know Lenovo have a way to force the operating system to the internal SSD.

Tags: Lenovo Tablets

Similar Questions

  • Cannot restore the resolution of the laptop

    I have an old 15 "Macbook Pro mid-2010. I still mostly run for daily work snow leopard.

    I have hooked to an external monitor and experience the resolution on the external display. I used an external display several times before, but without twisting his resolution.

    In the past whenever I have disconnected externally internal display by default my good laptop back to its native resolution, which seems to be of 1280 x 1024.

    But since my experimentation with a resolution from the outside, it is no longer the case. Resolution "reads" 1280 x 1024 in System Preferences, but the screen is severely "letter-put in a box" with large black bars on each side, no amount of clicking on the various resolutions and return to 1280 x 1024 don't restore correctly display without black bans.

    I tried to zap the PRAM, thinking that that would restore the screen settings internal. But it does not work. Any ideas?

    Try a SMC reset. Article covers when necessary, but this will not affect anything.

    Reset the SMC

  • HP Pavilion 15 PC laptop: laptop won't boot up - stays on the black screen

    My computer was working fine and then all of a sudden the screen went black.  I turned the power on and it came up with the error message "Unmountable Boot Volume" and then tried to solve the problem but just stayed on the screen black and never solved the problem.  I turned it off, did the hard reset when I remove the battery and hold the power for 15 seconds, but it's always the same.

    I went into the mode where I can try to restore the computer but it does not allow me to do. They say it restores and then just black.   I also ran a report where it says that the problem is "short hard drive DST Check: failed ' and gave me a code of 0SNHWW-7N987K-MFPWMG-60WF03.

    If there is nothing that can be done to help me I would be really happy I have use this laptop for work and really need to get it back running of emergency with minimal cost.  Thanks a lot for your help

    @Amyynatalia,

    The pleasure is all mine!

    I'm afraid not, you will be asked to pay more for the replacement drive as its not covered by the warranty.

    Keep me posted!

    Kind regards

  • IQ506 touch screen is black

    Hi, the other day I was on the pc and everything was fine.

    last night I turned it back and it was black I tried to do a system restore but its still black

    Thanks for any help

    Cissnie,

    You're welcome, if you can mark this as accepted this solution if there is anyone in the community who has this problem they can take a look at what we were doing.

    Thanks again and have a great day.

  • Time Machine does not

    I'm having a problem with Time Machine.  The program seems to be backing up my files correctly but when I run the application Time Machine so I can locate a file that I need to restore, I get a black box on the screen with a date on the right scroll bar.  I have attached a picture of the screen.

    Does anyone have any suggestions?  I rebooted several times, assembled and disassembled the external hard drive but still get the same results.

    I use a 2 TB WD My Book Essential external HARD drive.  My OS is El Capitan.

    Thanks for the answers and possible solutions

    If you use more than one display, please open the Mission control pane in system preferences and uncheck the box marked

    Viewers have separate spaces

    If it is checked. Log off or restart the computer.

  • Recovery disc does not work after the failure of the system.

    Hello world

    I got an error yesterday while booting which says "not found no startup disk." I disconnected and restarted at a black screen. I panicked. I got out my hard drive and made sure it is properly connected, and it was.

    I decided to try to see if it was the operating system that crashed. I put my original recovery disks in the computer. Here are the ones I made when I bought the computer new in box Office Depot. I put the discs and the message "loading of system files", said. I thought I was home free. And then the error is come that indicates the serial number not recognized? Can someone tell me what I should do to fix this problem?

    After that I got the message. I turned the power to the computer is turned off again and put the disc in and nothing but a black screen. I used the recovery disc once before when the computer has a virus so I know they work. Any help will be greatly appreciated. Thank you

    Hello

    Seems to me that it is a corruption with the hard drive.   Check if you can access the SafeMode

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    You can try a system restore by using the F8 key. http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    Black screen problems are usually not repairable, because it might be a corruption with hard drive. And what about drive recovery, you might receive this error message because the drive is damaged. It would be good if you contact your manufacturer immediately.

  • Folder Favorites of Windows 7 will not develop

    I have a new version of Windows 7 that's installed on a new machine. I meet a strange bug. It's a problem with the Expand function under Favorites in the Navigation pane. "Expand" Favorites folder is grayed out.
    Other records such as libraries and computer develop function is OK, only have problems with the Explorer Favorites folder.

    Right-click on Favorites, and then click 'Restore favorite links' restores the small clickable triangle at the front of the line and also restores the 'Expand' bold black title, but bothing else: the expand function still does not work when I click on the small triangle, and after a simple click the Expand line is grayed out again. There is no "Collapse" doesn't work at all, only "Expand".

    Left click and open the Favorites folder, all of the links/shortcuts are still there and work, I want to just reach them as Favorites in the Navigation pane expand the list...

    Hi thwilsonjr and Tommyvin.

    Create a new user account and check if the problem persists even in the new user account.
     
    Log on to the computer and create a new profile.
     
    To create a user account
    http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
     
    If the problem is resolved, you may have difficulty the user account is damaged. Follow the steps in the link to fix the damaged user account.
    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
          

    Aziz Nadeem - Microsoft Support
  • Incorrect version of the Intel driver causing the problems of Youtube?

    So I installed a program called the "Bluestacks App Player" from a few months back. It's basically an emulator designed to run Android on PC applications. When I downloaded first, he told me that she needed a newer driver. I thought it was weird, because Windows update is supposed to keep my drivers up to date automatically, but decided to go with her when even (because, you know, these birds Flappy urges...). Anyway, as soon as he installed the driver, my screen went black for about 10 seconds. Then the screen came back, but with a very old Windows design that I had seen before only when I booted my Windows 7 laptop in safe mode. After a minute or two, the screen has disappeared and then reappeared with the normal Windows 7 and updated design page. I started the program kkkkk and it worked fine and I was able to play some of my favorite on my laptop Android apps (Temple Run, Flappy bird, cut the rope, etc.). I thought it was really cool and decided not to do a system restore, despite fear of blacking out screen / display the safe mode of Windows style. After a month or two I had almost forgotten this topic.

    However, the other day when I was watching videos on Youtube, my screen blacked out for a few seconds before reappearing. An error message appeared, which I ignored him, assuming it was a glitch once. However, a minute later, when I was watching another Youtube video, the new screen blacked out for a few seconds. This time, I read the error message. (see attached image).

    My first thought was "what the f *! I have not even Windows 8 is installed. My machine came with and always had Windows 7. »

    So my question is, why I apparently have a driver for Windows 8 (R) installed on my machine? A compatibility issue between this driver Win 8 and my Win 7 OS could be cause my intermittent screen crashes? Also, is there a way to tell what drivers I'm supposed to be on my machine?

    Here's another picture. "programs" that were installed with

    KKKKK. Some of them as they have installed the drivers.

    Any help / advice would be appreciated. (But don't just tell me to do a system restore / repair installation.)

    P.S.: Youtube accidents have become more frequent recently. usually my screen turns off or when you try to load a Youtube video or to halfway through a Youtube video. It happens on average at least once or twice a day. Blacks usually only display on during a few seconds, then comes back with the error message shown above.

    Also, I checked the website of the manufacturer of my computer. I tried to download what I believe it's the correct driver.

    However, after downloading nothing's really happened. When I checked the downloads, it was downloaded a record intel with a bunch of files inside. How can I install the driver?

    I don't know how to use the downloaded folder in the site from my computer to install the driver. Also, I currently have a newer version of the intel driver, so I don't know if I can install this one since it comes from a previous version. Do I have to uninstall my current intel VGA driver first? If so, my computer will be able to operate without its VGA driver. As my computer is just a black screen, whenever the driver fails, if I uninstall it, don't I faced with a permanent black screen. I'll be even able to see what I'm doing?

    Do NOT trust Windows Update for drivers. Use only those provided by the computer manufacturer.

  • Incorrect driver installed on the computer.

    So I installed a program called the "Bluestacks App Player" from a few months back. It's basically an emulator designed to run Android on PC applications. When I downloaded first, he told me that she needed a newer driver. I thought it was weird, because Windows update is supposed to keep my drivers up to date automatically, but decided to go with her when even (because, you know, these birds Flappy urges...). Anyway, as soon as he installed the driver, my screen went black for about 10 seconds. Then the screen came back, but with a very old Windows design that I had seen before only when I booted my Windows 7 laptop in safe mode. After a minute or two, the screen has disappeared and then reappeared with the normal Windows 7 and updated design page. I started the program kkkkk and it worked fine and I was able to play some of my favorite on my laptop Android apps (Temple Run, Flappy bird, cut the rope, etc.). I thought it was really cool and decided not to do a system restore, despite fear of blacking out screen / display the safe mode of Windows style. After a month or two I had almost forgotten this topic.

    However, the other day when I was watching videos on Youtube, my screen blacked out for a few seconds before reappearing. An error message appeared, which I ignored him, assuming it was a glitch once. However, a minute later, when I was watching another Youtube video, the new screen blacked out for a few seconds. This time, I read the error message. (see attached image).

    My first thought was "what the f *! I have not even Windows 8 is installed. My machine came with and always had Windows 7. »

    So my question is, why I apparently have a driver for Windows 8 (R) installed on my machine? A compatibility issue between this driver Win 8 and my Win 7 OS could be cause my intermittent screen crashes? Also, is there a way to tell what drivers I'm supposed to be on my machine?

    Here's another picture. "programs" that were installed with

    KKKKK. Some of them as they have installed the drivers.

    Any help / advice would be appreciated. (But don't just tell me to do a system restore / repair installation.)

    Hi Jeffrey,.

    Thanks for the reply.

    I suggest you refer to the figure below. Click on the link given in the red zone. Try to install it on your computer and check. This driver is for Windows 7 (64-bit).

    It will be useful.

  • Loop of auto repair. Computer will NOT start at the top.

    My HP Pavilion becomes a blue screen with "Unhandled Exception in thread system.  He then brings me to a window of auto repair.  If I click, 'Restoration', the screen turns black with the logo 'HP' and then gets stuck.  If I click 'Cancel', it brings me to a screen that says: "auto repair couldn't fix your PC.  "Log file: C:\Windows\System32\Logfiles\Srt\SrtTrail.txt.

    I tried to go to advanced options and get the command prompt, using:

    Bootrec /fixMBR
    Bootrec /Fixboot
    Bootrec /rebuildBCD

    I also tried to open safe mode.  All with no luck.

    Something else I could try?

    Thank you!

    Hello

    Try to run the automatic repair of a Windows boot disk that often works better
    as the recovery of the system.

    How to run a repair 'automatic' to solve the problems of Windows 8 start
    http://www.eightforums.com/tutorials/2843-automatic-repair-run-Windows-8-a.html

    ======================================================

    If necessary:

    How to start on the "System Recovery Options" in Windows 8
    http://www.eightforums.com/tutorials/2269-system-recovery-options-boot-Windows-8-a.html

    Try to do a "Refresh your PC without affecting your files" (or modification of your personal data
    settings) or even a restore.

    Windows 8 includes special discount methods (keep files and settings) or a reset
    (new installation remove all).

    How to restore, refresh or reset your PC
    http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

    How to create a system image to refresh your PC in Windows 8
    http://support.Microsoft.com/kb/2748351

    How to update Windows 8
    http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

    How to reset Windows 8
    http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

    If you need a repair disc :

    Create a system repair disc
    http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

    How to create a "system repair disc" (CD/DVD) in Windows 8
    http://www.eightforums.com/tutorials/2855-system-repair-disc-create-Windows-8-a.html

    =======================================================

    In 'some' case will help this article.

    Crashes Windows or freezes
    http://support.Microsoft.com/kb/2681286

    Do not forget to check with support of system manufacturer (manufacturer of motherboard for custom
    online systems), their resources and the drivers and ask in their forums (if any)
    on known problems. Don't forget to update BIOS, drivers of low level chipset,
    and the other pilots of major on-board and separate devices
    . Those who alone can
    set all or part of these issues.

    Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
    According to needs). Win + D key calls the office and using Win Key active / disable the Office
    and the splash screen.

    Translate Windows 7 methods and use them on Windows 8/8.1

    Resolution of the blue screen in Windows 8/8.1 errors
    http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors

    Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or can not
    Start Windows (applies to Windows 8/8.1). If you cannot start Windows 8/8.1 try using
    a disk repair (see methods of doing a below) to access Mode without failure and other evil -.
    steps of shooting.
    http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

    Check this thread for more information using BlueScreenView, MyEventViewer and other troubleshooting methods BlueScreens - top 3 responses (+ 1 other) (applies to Windows 8/8.1).

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

    We can analyze the minidumps if make you it available the OneDrive or other file sharing sites (such as MediaFire). If you have problems downloading the minidumps copy them on the desktop or the Documents folder and download them from there.

    Adding files to your OneDrive
    http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

    Download pictures and files
    http://Windows.Microsoft.com/en-us/onedrive/add-photos-files A disk - sharing files and folders and change the permissions
    http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

    ZIP or download the content of the C:\Windows\minidump

    Use OneDrive to upload collected files

    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    -------------------------------------------------------------------------

    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant. (also, Windows 7 and Windows 8/8.1)
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    ======================================================

    The system has RAID? If so, it's also very suspicious.

    This error is usually a driver problem and adapter (video) display driver is the most suspicious that there could be others. Antivirus/antispyware/security programs, equipment (heat) and major software issues can also cause the error. When you get to the section of the driver of the utility troubleshooting use my generic methods below, and then return to the if necessary troubleshooting tool.

    Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - updates of Windows to see if all drivers have been updated it. Other donor opportunities include security/antivirus/anti-spyware programs.

    ------------------------------------------------------------------

    BCCode: 7F 0x0000007E which is also 0x1000007E

    BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
    * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

    Bug Check 0x7E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED

    http://msdn.Microsoft.com/en-us/library/ff559239 (v = vs. 85) .aspx

    ---------------------------------------------------------------------------------------------

    It's my generic how updates of appropriate driver: (updating the video/display driver and BIOS)

    This utility, it is easy see which versions are loaded: run DriverView - VIEW driver Microsoft set hide - update those without drain in their names (and BIOS and chipset).

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For each driver in the list, additional useful information is displayed: load address of the driver, description, version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.

    Control Panel device - graphics card configuration-manager - note the brand and complete model of your graphics driver - double-click - tab - write version information. Now, click the driver update (this can do nothing as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT it will refresh the driver stack.

    Repeat for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their own software and drivers and the other main device drivers you have.

    Now go to the website of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration), then site of the manufacturer of the device (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Review of the BIOS, Chipset and software updates on the site of the manufacturer of the system while there).

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

    Always check in the Device Manager - tab drivers version you install actually shows up. This is because some restore drivers before the most recent is installed (particularly that audio drivers) so install a driver - reboot - check that it is installed and repeat if necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Windows 8/8.1 - hardware and drivers
    http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

    Windows 8/8.1 - Why Windows is not find my device?
    http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

    Windows 8/8.1 - what happens if a device is not installed correctly
    http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

    ========================================================

    Windows 8/8.1 includes special discount methods (keep files and settings) or a reset
    (new installation remove all).

    How to restore, refresh or reset your PC (Windows 8/8.1)
    http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

    How to update Windows 8 & 8.1
    http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

    How to reset Windows 8 & 8.1
    http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

    If you need a USB Flash Drive recovery or other methods:

    How to create a recovery USB in Windows 8 & 8.1

    http://www.eightforums.com/tutorials/5132-recovery-drive-create-USB-flash-drive-Windows-8-a.html

    How to start on the "System Recovery Options" in Windows 8 & 8.1
    http://www.eightforums.com/tutorials/2269-system-recovery-options-boot-Windows-8-a.html

    Boot to the tip "Startup parameters" in Windows 8 & 8.1
    http://www.eightforums.com/tutorials/4924-advanced-startup-settings-boot-Windows-8-a.html

    --------------------------------------------------------------------------------------

    Tests of memory intercept all errors, such as memory do not match (possible even for poles that seem identical) and how faster memory is placed in system behind the slower memory. Also is it better to Exchange also sticks in and out to check for those, even if all the tests of memory do not show a problem.

    To test the RAM here control - run 4 + hours or so.<-- best="">
    www.memtest.org

    For the Windows Memory Diagnostic tool.

    WinKEY + W - type in the search-> memory box - find the top Memory Diagnostics tool
    list - and follow the prompts.

    How to run the diagnostic tool for Windows 7 memory (and 8/8.1) - in Windows 8/8.1 the name is "Windows Memory Diagnostic".
    http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

    ======================================================

    After doing ALL the updates you can and if the problem persists, run DriverVerifier.
    (Remember to use the methods Windows 8/8.1 displayed at the top of the first answer above).

    Driver Verifier can help find some BSOD problems:

    Using Driver Verifier to identify issues with Windows drivers for users advanced
    http://support.Microsoft.com/kb/244617

    How to solve the problems of driver in Windows Vista or 7. (also 8/8.1 and 10)
    http://www.WinVistaClub.com/T79.html

    Using Driver Verifier
    http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

    How to use Windows drivers check Manager to solve problems and identify the Driver questions
    http://www.YouTube.com/watch?v=_VwIDD9xngM

    Driver Verifier
    http://www.techsupportforum.com/2110308-POST3.html

    Using Driver Verifier
    http://www.faultwire.com/solutions/using_driver_verifier.php

    You can disable the driver verifier
    http://support.Microsoft.com/kb/244617

    WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable

    BlueScreenView lets you know if there is a driver specified in the error message. Also check with MyEventViewer when the blue screen.

    If DriverVerifier creates a minidump upload it and post the link here so we can analyze.

    I hope this helps.
    --------------------------------------------------------------------------------------------
    Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

  • When I click on the restore, the button, the page Web is suddenly too wide and I can't settle it with the black arrows.

    Two hours ago, it was fine, but now it won't let me adjust the width when I restore to the bottom of pages. The width is currently half of the screen, which is too big for what I do. The black two-headed arrow appears, but it wont let me make the finer Web page. I can make it wider, however, but not what I need.

    There is a minimum width. Users have reported different values, ranging from 374 to about 400 pixels. If you need a window smaller than the minimum width, please see these discussions for how to replace the integrated with a smaller minimum:

  • At the end of the factory restore, but black screen after "Windows has set up the computer.

    The model in question is VC863AA #UUW

    I want to get back the computer to the factory condition, so I rebooted and you press F11. Everything went exactly like this: http://support.hp.com/us-en/document/c00814731#N72 (chapter "Start a restore from the hard drive and the computer is off")...

    .. until step 10, which States:

    "The computer restarts and continues in the installation of Windows. Complete the configuration screens and wait until the computer finishes the installation program. "Then turn off the computer, reconnect all devices and turn on the computer.

    Yes, the computer restarts. She continues in the Windows installation (it says "medan windows konfigurerar datorn Vanta", which means roughly "Please wait while Windows configures the computer"). After that which was for about 5-10 minutes, the text disappears and the computer restarts by itself.

    After that, he gives a normal load Windows Vista bar and after that black screen. It seems to be a little bit alive but jammed somehow. If I let it be for several hours, he goes to the standby mode. If I wake up, he still won't. I can plug a USB another keyboard and he will make some access to hard drive (load a driver probably). I can press the sleep button and it will go into sleep mode. But if I press the power button / stop briefly, it will NOT stop.

    So finally, after several hours I forced to shut down (by pressing the power button / stop longer). When I start it, it goes back to behave as explained in the previous paragraph.

    If I press F8 during startup and select Safe mode, it goes in safe mode and I get dialogue indicating in Finnish:

    «Asenna Windows: Windows ei voi suorittaa vikasietotilassa asennusta.» See devam fenetresdans asennusta uudelleen tietokoneen kaynnistamalla. »

    Rough translation:

    "Installation of Windows: Windows cannot complete installation in safe mode." "You can continue the installation by restarting the computer.

    If I restart the computer, it goes back to the black screen after the windows loading bar.

    This suggests that there is something in the installation of Windows who jams it.

    I can install Windows Vista from a Vista DVD, but then I can't use the software included with the computer. (App States installation cannot install on a machine that is unauthorized, then of course they are looking for some OEM HP things.)

    Any suggestions on how to fix jam that continues with installing Recovery Windows or how to install the software on a normal Vista would be very appreciated.

    I solved the problem. Good thing I didn't order the restore disks, because that would not have solved the problem.

    I decided to post it because I don't know there will be others who have HP Pavilion Elite m9754sc and will have to face this problem of a black screen after the restoration.

    The fact is that the restore worked perfectly, but in this display card driver is buggy and it causes the screen to go black.

    I thought that what I installed fresh Vista which worked until I installed the driver from the recovery partition display. I tried VGA, outputs HDMI and DVI on the factory installed GeForce GT220 and none worked.

    A defective display driver should normally be no problem we could go in safe mode and fix it to the it. But as with the recovery goes to pre install state (ask what language to use etc.), safe mode does not work.

    So the solution is to unlock the display of the motherboard connectors and remove the factory installed GeForce GT220. Once the recovery and installation of Windows is finished using the graphics card integrated motherboards, you can reconnect the GeForce GT220 and get a updated driver with safe mode.

  • 6 s iPhone restarts with black screen randomly. However, the system always restores the same question.

    I have an Iphone 6 s 128GB. The iphone automatically restarts with black screen and there is no particular application I use when it crashes.

    I did a system restore twice but still the same issue. Could someone please help?

    If the restore does not solve the problem, it is high time to take your device at the Apple Store for more diagnoostics. This may be material / display problem. Good luck.

  • Screen blacked out how I can restore

    my screen has blacked out how to restore it

    Try to force your iPad to restart. Press the sleep and home for about 20-30 seconds. If you see the silver Apple, let go and let him complete restart and see if your screen at the back

  • Restore color a black and white screen

    Hello

    I changed the display setting of the black and white color on the Mac Mini and now I can't restore it to color. How can I do? also printing in black and white too.

    Thank you

    For the display, go to: Apple > system preferences > accessibility > display and uncheck Use grayscale.

    -------------------------------------------------------------------------------- ------------------------

    To print, click file print and click on the blue arrow

    Select the printer settings

    then select color.

    Note: the printer preferences can be slightly different, depending on which printer you are using and what application you are printing from.

Maybe you are looking for

  • Why the image of the logo is not display in Firefox?

    The image of the logo for one of my sites does not appear. The alt image info is displayed. It is a relatively new problem. In older versions of Firefox, the image correctly. As well, the image displayed in browsers, Webkit and IE10. There is a speci

  • Current output digital USB-6009

    Hi, I'm trying to increase the voltage output digital device USB-6009. I read a few topics on the use of a relay, but I couldn't get it. I was thinking of using power 5V on the map because there current 200mA on it, but when I use it with open-collec

  • Windows Media Player 11 has a way to find and delete the dupes

    Using Windows Media Player 11, is there a way to search and remove duplicate music files?

  • (BB10) TabActions crash on Golden SDK app

    Hello! Last updated sdk Gold, TabActions added an ActionBAr do app crash and close without displaying an error. It worked well on a previous sdk beta, but same code breaks in gold. I also tried a sample application which adds an actionbar and breaks

  • Internet Central using DMVPN

    Dear all, I have a client who has a HO and 300 branches. HO is to have a leased line and all branches having ADSL(dynamic_IP).currently this configuration works very well. He new requirement is to transfer all branches Internet traffic to HO in the b