Restoration of old keychain after resetting the default keychain

Similar Questions

• Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power Home). The phone is new (5 days). It's a m

  Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power + Home).

  The phone is new (5 days). It's a wedding?

  If you encounter this flicker, then the next troubleshooting step is to restore from a backup. If the behavior persists after the restore, then the last step is the factory restore. If after the factory restore and adding no additional content, you see always this problem, then you must make an appointment at the Genius Bar to the nearest Apple store or service provider authorized Apple to have the material examined. If the behavior goes after the factory restore, then sync again your content manually, without using the backup. It seems to me it's corrupted content in the backup.

  Restore your device from an iCloud or iTunes backup - Apple Support

  Use iTunes to restore your iPhone, iPad or iPod settings - Apple Support

• Always necessary to reset the default boot to Windows 7 start menu

  HP P6632f 64-bit computer

  OS Windows 7 Home Premium version

  Error messages that have been found are

  An unknown error during system restore 0 x 80070002 (used a different restore point and it worked)

  BIOHD 4 error code (this appeared on two occasions however, the computer starts with F4 in the start menu)

  There were no additions to the computer for several months, however there was a power outage that shut down computer just before it started.

  When the computer starts up goes to the first blue screen when you can press Esc for boot menu, F9 for diagnosis, etc..  The boot then fails and requires a boot disk.

  To fix this problem, I used the repair disc and or F8 to access different repair options.  I used the Startup Repair, System Restore, as well as the bootrec /fixboot and bootrec /fixmbr commands.  They have worked to get the computer to start, however, when it came to a reboot I was at square one.  When you use the Startup Repair disk and HD, there would be a report that there are no startup issues or questions start had been repaired but sometimes it would start and sometimes it wouldn't.

  If the safe is a restart then most of the time it will restart correctly.  However if the computer is stopped for more than a minute it will not start.

  I now start the computer by using the ESC key at startup to the top and enter the boot menu. I then use the F4 key to reset the default start menu and the PC starts and works well. The start menu lists first, second HD DVD and the Real tek DXEB03 D00 as third. (Don't know what this is.)

  Any helps resolve this, so I don't have to reset the default start at each start menu would be appreciated.

  It is unlikely that a HP Recovery or repair of Windows will last if the hard drive has failed. If you buy a new hard drive, you can order a series of HP's HP recovery disks or a third party provider of third party. If please see "Software media and command pilot" page or contact HP Customer Support. to order a set of HP recovery disks. You can also buy the ComputerSurgeons.com recovery discs if you prefer.

  If you don't mind lose the use of all the factory installed HP softtware 'value-added', please visit "how to install Windows 7 without the disc" to get instructions on how to download Windows 7, create the installation media and install Windows 7 using the product key 25 character of the COA Microsoft on your computer.

  Please click the White Star of KUDOS to show your appreciation

• How to reset the default values for the import of images

  With the help of Windows 8. file import settings have been changed for a tag, which was a mistake.  I can't change the import settings because the import happens too fast for me to get click on that link the import settings.  Is there a way to reset the default values to their original settings, so I can get things organized again?

  If it isn't a recent phenomenon then try to fix things via the system restore.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (7 or 8).
  http://support.Microsoft.com/kb/936212/#appliesTo

  See, control Panel\All Control Panel Items\Recovery\ Open System Restore

  Change the settings for importing pictures and videos
  http://Windows.Microsoft.com/en-AU/Windows7/change-settings-for-importing-pictures-and-videos

  See control Panel\All Control Panel Items\AutoPlay, maybe you can click on 'Reset all default settings'?

• How to reset the default mail program? When I click to send e-mail to a box of 'Contact us' site web or excel sheet spread with addresses e-mail, a new msn email opens.

  How to reset the default mail program? Got msn.com. Now, I went to q.com. When I click to send e-mail to a box of 'Contact us' site web or excel sheet spread with addresses e-mail, a new msn email opens. Now, I get an error message: rundll32.exe - bad Image, followed by a message the the appklication or the DLL C:\Program FIles\MSN\MSNSharedFIles\MAILMAPI. DLL is not a valid Windows image. Please check against oyur installatiion diskette. I have msn unisnstalled.

  I can access my e-mail through hotmail msn, but no linger to subscribe to msn premium.

  original title: default e-mail program

  Hi PAULKRISSEL,

  This function is not supported natively in Windows. You may may find a third of the program that will change the default to q.com.
  
  WARNING: Microsoft provides no assurance or warranty, implied or otherwise and is not responsible for the download you receive from the sites of third parties or support related to the download or the downloaded technology. If you need assistance dealing with third party technology, please contact directly the manufacturer.

• How can I reset the default settings of the monitor for Vista

  Somehow, I ended up setting my screen laptop like I have look on the side for one of the two users on the PC.  The other user is fine.  Any ideas on how I can reset the default to display monitor?

  Try holding CTRL + ALT + UP arrow at the same time. You can also try the other arrows. I hope I could help

• After resetting the NVRAM C309a rejected all new cartridges

  How to fix c309a after resetting the NVRAM rejected all new cartridges, for an ox610000fb mistake made semi nvram reset done

  after reboot, asking all the cartridges to replace? help is appreciated.

  Unfortunately, I think that the printer is irredeemably right now especially if you did a reset full semi and still get an alphanumeric message. I have a document that I can link to for you on the error codes alphanumeric on this printer, which I will give you. But at this point, you must call to HP Total Care for assistance. Here is the link to this document.

• How can I restore my passwords in the keychain after resetting the PRAM?

  I have reset my PRAM on my iMac 24 "after some wobbly behavior.  Everything is going well except that all my saved passwords in Safari are gone.  Can I get back them?  Where should I look?

  Reset the PRAM should have no impact on your Safari passwords. I would recommend realized a report of EtreCheck and announcement to your response to this message. Simply click on the link, download the application and view the results of the report in your response to this message. The report will indicate any question obvious cause of your problems.

  If you want to learn more about EtreCheck, please click on the link.

• After resetting the iPad to default it show that the power cord is trying to connect to iTunes

  I got an iPad 16 GB factory reset default after a while display only the power cord going to iTunes, need help to get this operational back, it worked Ok before resetting all we have tried to make clear the former owner information

  The iTunes icon and cable image means he went into recovery mode, you will need to connect it to iTunes to your computer to reset the iPad, and you can then restore/resync your content.

  If the previous owner had not disconnected from the settings > iCloud on it and find my iPad has been activated, you will need to communicate with him or her: disable find them my iPhone Activation Lock - Apple Support

• How can I get Word 2007 to reset the default printer after each draw?

  I'm not the most tech savvy person in the world, but I know my way around MS Office well enough; When my boss got a new computer last month, I helped to set up, install the MS Office, etc.  Now, she complains constantly that he does not restore the default printer after each draw and "my old computer used to do that for me - I never know where it'll print now."

  How can I configure sound MS Word to print from the default printer each time unless otherwise selected?

  I have the default printer specified in Windows, but each time she chooses an active printer, MS Word uses the current printer instead of the default printer.  I just need to know how to solve this problem?

  If you open a doc Office that it allows to print to the printer origonal used when saving this doc.

  If you use the Btn Office Orb, you can select the printer

• Historical data for missing Lifelog after resetting the software and restore

  Hello

  I used lifelog with sony account for one year. Two weeks ago, I sent my cell phone from Z3 to solve the problem of speaker. Before gaving the phone I save the data with the company Sony PC with all the options checked and reset the phone.

  After the fixed number, I restored the phone. Now I tried to lifelog of logon with the account of sony, and he says no account found. I'm doing a loss all records in history.

  I would like to have the records. Is it possible get it back my backup? I really hope I could have those back, would be very grateful for help.

  hosais

  You are probably using a different account, the data, it is stored with Sony servers, so even if the factory reset you phone or change phones, you can synchronize your data.

• restoration of old files after the clean installation of Vista Windows__

  How can I restore old files after you perform a clean installation of Windows Vista

  If you have an installation clean back to factory settings, you normally wiped your hard drive clean during the process.

  You can try this program:

  http://www.SnapFiles.com/get/Recuva.html

  Recuva is a file undeletion tool that allows you to analyze your hard drives or media cards for files that have been deleted or formatted. It presents you a list of files that have been found, as well as an assessment of their potential for recovery, a preview option, and a hex viewer to inspect the content. You can limit your search to files of a certain type (e.g. images, audio etc.) and choose between a quick and a thorough analysis approach. The program also includes a secure deletion option that allows you to permanently delete files that were found while parsing, to avoid any future recoveries.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Find a windows.old folder, because we don't know exactly how you have installed.

  http://support.Microsoft.com/kb/933209

  How to recover files from an earlier version of Windows in Windows Vista

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If none of the above solves your problem, try data recovery companies.

  Be warned: they are $$$

  See you soon. Mick Murphy - Microsoft partner

• Reset the default printer after each print job.

  I wish that my printer to reassign the default printer after each print job.  I have a Hp LaserJet 1020 on my desk as my default.  Sometimes however, I print on our printer color etc.  Then when I go to print again immediately after the color printing - it is (and not my default).  I looked in the printer properties, devices, etc. - but do not see where I could update this?  Can you let me know.  Thank you.

  You don't say how you make that decision to change printers. I have two printers, all-in-one (default) HP4135 and HP6122 duplexer.

  Example: Leave in MS Office Word 2007 default print would always be. But I can choose a printer to use. With this selection, as long as I stay within this project, the HP6122 could be used. It would default to the HP4135 if I closed the project.

  If you go: start, Control Panel, printers, you will see all printers. The default value has a green check mark. Right-click on the printer icon and a menu descends with an extra function "Set as default printer".

• How can I restore my old profile data for the reinstalled firefox

  had a problem with the opening of firefox and he suggested that I install a new version, I did and I have an "old data firefox" file. My question is how can I reinstall the old file and all the stuff that's about it.

  A 'Old Firefox Data' folder on the desktop is created when you reset Firefox.

  You should be able to copy the data selected from this folder to the current Firefox profile folder.

  For bookmarks that you would need to file places.sqlite or possibly restore bookmarks from a JSON backup in the folder bookmarkbackups.

  • http://KB.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  See also:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• How can I reset the default search on the homepage from Firefox to Google?

  I recently had to uninstall the Yahoo forced on me without warning by an application toolbar, but this remnant seems to have permeated in the

  If there is a problem with all: Home Home page and then try to reset the search engine used on the subject: homepage.

  Reset the pref browser.startup.homepage_override.mstone through the context menu by default on the subject: config page and close and restart Firefox to restore the on: default home page.

  • Open the topic: config page through the address bar
  • Type in the filter bar: mstone
  • Right-click on the browser.startup.homepage_override.mstone line, and then select: Reset
  • Close and restart Firefox

  If this does not help, then delete the button Delete the chromeappsstore.sqlite file in the Firefox profile folder and repeat the above.

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: opens showing the file