Restoration of Windows Media Center Edition 2006

Similar Questions

• Problem installing Windows XP Pro/Windows Media Center Edition

  A few years ago, I built a system which consists of MS Windows Media Center Edition.  Recently, the hard drive failed.  I replaced the drive with a 1 TB Seagate Barracuda SATA drive.  Strangely, I can't reinstall MS Windows Media Center.  To clarify... with MS Windows Media Center cd in the drive, the installation went well.  The hard drive has been formatted and that the CD-ROM files have been hard disk messages were present.  The next step was a reboot by MS Windows cd.  This is where the installation fails. After the reboot, the Windows XP splash screen came as if the program Windows opened on your desktop.  At halfway through the splash screen, the system restarts.  Reboot forever more.  I don't know what is happening. Anyone?

  Test your player - create a Bootable CD:
  Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.

  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors.
  SeaTools for information: http://www.seagate.com/support/downloads/seatools/
  SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
  SeaTools for DOS download:
  http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

  HD Tune:
  Provides information of the car and has an option (tab scan error) to test your drive.
  http://www.hdtune.com/

  SpeedFan:
  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
  It displays your drives model number and compares your drive with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php

  J W Stuart: http://www.pagestart.com

• Key export and Re - installing Windows Media Center Edition

  My hp zd7269cl laptop comes with Windows Media Center Edition version 2002. Now these discs are long gone but I bought oem recovery disks but he said media center 2005. Will I have trouble validating my code the product key (on the bottom of my laptop) after a clean install on new hard drive, because they are records of 2005. Also the driver disks don't work with what is installed on my computer.

  The key and the disc should work, but you may need to activate by phone. Regarding the drivers I check the web site of the support of the factory (for your make and model) and download in a folder or a flash drive and use them and not what the disk you have. Note: Install the driver chipset first, then the remiaing drivers, save the graphics driver for the end.

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  If the activation of the Internet does not work, then see the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 for the letter B, etc.)

  ===================================================================

  Blank page to activate Windows in the wizard of Windows Product Activation
  http://support.Microsoft.com/kb/314935

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: http://www.pagestart.com

• Where can I find the Roll Up 2 update for Windows Media Center Edition 2005?

  I'm trying to download Media Player Version 11 and it says that I need to first install the Roll Up 2 update for Windows Media Center Edition 2005.

  Hello

  Before installing Windows Media Player 11 on Windows XP-based computer, you must download and install the Update Rollup 2 for Windows XP Media Center Edition 2005 on your computer.
   
  Initially, download cumulative update 2 for Windows XP Media Center Edition 2005 from this link.
  
  Update Rollup 2 for the Windows XP Edition Media Center 2005 (KB900325)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=12939
   
  Check out the link below to install Windows Media Player 11 on Windows XP.
  Windows Media Player 11 for Windows XP
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=8163
   
  For more information, see Help links.
  File Readme for Windows Media Player 11 for Windows XP
  http://Windows.Microsoft.com/en-us/Windows-XP/products/Windows-Media-Player/11/Readme
   
  Update Rollup 2 for Windows XP Media Center Edition 2005
  http://support.Microsoft.com/kb/900325
   
  It will be useful.

• Update for Windows Media Center Edition 2005 - error code 0 x 643

  I tried to install the upgrade to allow streaming of MCE to my Xbox.  Failed to install and the installer told me to uninstall the MCE updates and re - install, I tried to do and the Update Rollup 2 for the Windows XP Edition Media Center 2005 (KB900325) fails with the error code 0 x 643.  I tried to turn on Windows Installer logging as described in the Article 958052 but appears not to work - is certainly not creat a newspaper in the msi format file? Log in as the article says it should.

  I find the MCSetup_UI.log that has the following text (identical to my two attempts today):

  ***********************************************************
  Thursday, November 5, 2009 11:11:48
  ***********************************************************
  11:11:48: silent installation.

  11:11:48: no reset.

  11:11:48: control of administrator account.

  11:11:48: control .net Framework 1.1 and SP1 is installed.

  11:11:48: don't check only one instance of Setup.

  11:11:48: audit (correct version of MCE OS)

  11:11:48: check the hard disk space.

  11:11:48: 18788343808 of free space

  11:11:48: audit of EULAS is present.

  11:11:48: initialization of the installation packages.

  11:11:48: start the conditions met.

  11:11:48: 1 package initialization.

  11:11:48: install the package 1 [hotfix for Windows XP (KB895572)].

  11:11:50: install the package 2 [hotfix for Windows XP (KB895572)].

  The update to Media Center has failed. The computer will now be restarted and restored to the State it was in before the update. If please try installing again, or contact the manufacturer of your hardware to support if the problem persists.
  11:11:50: do not reboot the machine.

  11:11:50: check the Exit Code.

  11:11:50: MCinstaller returns the exit code - 1603

  11:11:50: output

  Can someone help me please?

  Hello Martin Jackson,.

  Thank you for using the Microsoft answers Forums.

  Solution for code 643:

  It is a common problem with the updates of the .NET Framework.

  http://support.Microsoft.com/kb/923100

  Follow the steps in the link above to fix the problem.
   
  That should make the tirck for you.

  Thank you.

  Kind regards

  Augustine. UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

• I have windows xp media center edition 2006 when I put in the sdhc card, nothing happens but it will not work on windows 7

  When I remove my camcorder sdhc card and put windows xp I guess he's not reading but it will work in wimdows 7 I have service pak 3 instaled on my computer that I need to install something else

  You may need to install a "patch".

  See if these items help you:

  "Fix for Windows XP that adds support for a capacity of more than 4 GB SDHC cards"
    <>http://support.Microsoft.com/kb/934428 >

  «The 923293 hotfix adds support for SD memory cards high ability in Windows XP»
    <>http://support.Microsoft.com/kb/923293 >

  It is also possible that your card reader itself does not support SD cards that are more than 4 GB (i.e. SDHC).

  HTH,
  JW

• Re-installed Windows XP Media Center Edition 2005 with TechNet discs and now the product key on the computer does not work.

  I have a client who has a Dell Dimension E510 with Microsoft Windows Media Center Edition 2005.  Failure of their hard drive, so I installed a new hard drive and reloaded Windows XP Media Center Edition 2005 collection of Technet.  I'm now start using the Microsoft key update tool to update the product key in the product key of the client on the system chassis.  Unfortunately the Microsoft key update tool is not supported in this version of Windows XP.  The client doesn't have their media.  Any help would be appreciated.

  original title: Question of key product Microsoft Windows Media Center Edition 2005

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 for the letter B, etc.)

  Blank page to activate Windows in the wizard of Windows Product Activation
  http://support.Microsoft.com/kb/314935

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com

• Want to join a wireless printer in XP Media Center Edition 2004.

  Original title: XP Media Center Edition 2004?

  Can I attach a printer wireless with XP Media Center Edition 2004?

  Hi DWGSMITH,

  Yes, you can connect a printer wireless on XP Windows Media Center Edition 2004.

  You can follow these steps to install the printer:

  (a) you can use the supplied with your printer installation CD to install the drivers for the printer on your computer software. Alternatively, you can download & install the software of the printer from the manufacturer's website.

  (b) connect the printer wireless on the computer. Make sure the printer is powered before you continue.

  (c) click Start menu > settings > Control Panel > printers and faxes.

  (d) click on "Add a printer" in the navigation bar on the left under "Print jobs." The "Add Printer Wizard" opens.

  (e) follow the wizard until you reach the page "Network or local printer" and choose "Local printer"... «or «Printer network...» "Choose the basis on the question of if the printer is connected directly on this computer or a print server or other computers on the network.

  (f) type the wireless network password, if prompted. The Printer Wizard can also ask to install drivers to print before the final connection is made. Click 'Yes' If you receive this prompt.

  (g) close the wizard when you get to "Finish."

  Reference: To add a printer attached to your computer

  To install new or updated printer drivers to update

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer

• Default Media Center Edition motherboard?

  Windows Media Center Edition Version 2002, Service pack 2.

  If someone knows the default motherboard - which came with it in the box - or can help me find the information about this, please respond.

  Other information
  Need to see if a specific graphics card will work
  I DO NOT have the box.

  Hello
  the MB has been installed by the producers of the computer
  they would be thr best source for this imformation if this post can help solve your problem, please click the mark as answer checkbox on this page it helps people who need quick access to answers THANKS AND GOOD LUCK

• Error "Invalid Application" - failed to launch at the launch of Windows Media Center.

  Original title: Windows Media Center Edition:

  Current operating system: Windows Vista Ultimate 32-bit SP2, latest MS Silverlight installed

  Freshly installed, all updates up to SP2, whenever I have open Windows Media Center, and then select Internet TV (TV + movies) I get an error stating:

  «INVALID APPLICATION - unable to launch «»

  Nothing opens and I see all the icons TV.  I then click on the OK button and the app closes back to TV + movies (TV recorded - by default).  I can click on Play DVD, no problem.  I can click on the Netflix plugin (once again no problem).  The question seems to exist ONLY when I select 'Internet TV'.  I don't have a TV Tuner card in the machine, as well as setting up is not an option.

  Note: I am a COMPUTER technician for over 20 years and have researched the matter only of trying many fixes that don't work not including:

  • sfc/scannow (does report no error)
  • CHKDSK (no corruption of reports)
  • reinstalled MS silverlight
  • Installed the Netflix option
  • Parameters, make sure all the General internet settings are selected correctly
  • Disabling the firewall/AV
  • Change Windows MCE receiver opening Service of the Local Service Network Service logon

  Except to call Microsoft and forking over $99 - nobody knows what is the cause?

  Additional information:

  After starting Windows Media Center, and then selecting TV + movies, under the heading Internet TV a bit dimmed it says "BETA".  Not sure if this has something to do with it.  Also on my laptop which has Windows 7, the Windows Media Center interface is different and seems to work without problems.  What gives?

  Any help would be appreciated.  Thanks in advance!

  Microsoft abandoned Internet TV from 9/20
   
  | Freshly installed, all updates up to SP2, everytime I open Windows Media Center
  then select Internet TV (from TV + movies), I get an error
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• Qosmio F30: How-to: Manual Installation of Windows Xp Media Center Edition 2005

  Manual installation of Windows Xp Media Center Edition laptop Toshiba Qosmio F30 computer 2005
  Last updated October 3, 2006

  Important notes before starting:

  1 - the steps used for "Toshiba Qosmio F30" and for others models Qosmio that comes with "Intel Centrino Duo" Cpu and Xp Media Center 2005 installed.

  2. apply these steps if you have previous experience in the installation of Windows Xp, if you have that experience, then you can use the provided recovery CD to restore your system.

  3 - Windows Xp Media Center Cd is not provided with your laptop, if you have the Cd you can purchase from many online shops and in this case you will get the product key valid Windows Xp which you'll not need (because you already have one, you will find in it a small sticker on the back of your laptop and you can activate your Windows with it).
  In other words (you need for the first and the second Cd of Windows Xp Mce 2005 SP2 Oem).

  4. do not try to implement these measures on the other Versions of Windows Xp, use "Windows Xp Media Center Edition 2005 Sp2 Oem" only

  5. you must have the Usb floppy drive to install "Toshiba Raid Controller", it can be installed that by having the driver on a floppy disk and pressing F6 during the setup of Windows Xp, if you do not install the Raid driver then will Windows Xp does not recognize your hard drive.

  6 - notice of disclaimer
  I don't will not be responsible or liable, directly or indirectly, for any damage or loss caused or allegedly caused by or in connection with the use of this site or its content, including but not limited to delays, omissions and inaccuracies in content.

  Steps to follow:

  1 create drivers Cd of "Toshiba help utility", you should see the Toshiba help icon on the desktop, and then in the Toshiba help choose the "protect & difficulty" tab, you will find the Option ' create drivers & tools Cd "and insert a Cd Virgin to write to this
  "If this Option did not work, then you must install the restore Cd to get this job", the drivers are installed in a folder called Toolscd in the C:"" drive. To install your recovery Cd Power on your laptop and the "F12" hold and use the arrow keys to select the icon of the CD to boot from the Cd.

  2. create the Toshiba Raid since the driver Cd driver, the Toshiba Raid driver must be added during the Installation of Windows XP when they are asked to "Press F6 if you need to install a third party SCSI or Raid Driver".
  To do this, insert the Cd of ' Windows' drivers, it will run automatically or Run "Browser.Exe" inside the Cd The 'Raid Driver' and click on Select 'Installation', it will show you the Raid driver files, insert A Blank Floppy and copy the files in The Floppy 'To be sure that all the files be on the root of The Floppy' or to download the Toshiba RAID driver from the Toshiba web page download driver and extract the file zip on a diskette. Yet once, all files must be at the root of the floppy disk not in a folder"

  3 - Connect your Usb floppy drive and insert your Cd of Windows Xp Mce 2005 1 turn on your laptop Hold "F12" and use the arrow keys to select the icon of the CD to boot from the Cd.
  When you get the Message «Press any key to boot from CD...» ", press a button, if you do not press a key, it does not start from CD-ROM, press F6 when prompt to 'press F6 if you need to install a third party Scsi or Raid Driver".
  The Setup program continues until you are asked if you want to "S = specify additional device. Press' and specify the driver Toshiba Raid for Xp. press "enter" to continue with the Installation.
  Do not upgrade your Installation of Xp, start new Windows Installation and Partition on your hard drive, Windows Installation will be ask you to insert Cd 2, and will copy some files and will ask continue you to insert Cd 1 once again, with the installation until Windows finish the installation of the.

  4 - after Windows finishes the Installation insert the Cd drivers and select "Microsoft Updates" from the Drivers Cd click 'Installation' button, click on "Qfe" and ONLY install the following updates (don't let the updates restart your PC until you have finished installing all of the updates)
  A Q896256
  DIFFICULTY 'computers that are running Windows Xp Service Pack 2 and that are equipped with multiple processors that support processor power management features may experience decrease in performance'
  B Q910437
  DIFFICULTY 'High Hit Count Watson Crash in Wu Client '.
  C Q889673
  DIFFICULTY "Hardware (Dep) - computer activated may quit unexpectedly after recovery from sleep mode or hibernation in Windows Xp Service Pack 2"
  D - Q896243 (very Important, this will make SD and MMC cards for work)
  DIFFICULTY "ADD Support high-speed SD card"
  Other updates are not required to install, because you will install it later when you run Microsoft updates website updated Microsoft after finishing to activate your Windows.

  5 - Download and run "Intel Chipset Software Installation Utility' of the Intel Web site
  (Restart your PC after Installation)
  Do not install "Driver Chipset" since the drivers Cd, this is an old Version, try installing the most recent from the link above.

  6 - install the "Display Driver" of the Cd of drivers (no need to reboot).
  Note: To avoid annoying Messages to drivers during Installation to do the following: -.
  Go to control panel, system, Hardware, player signature properties, select "ignore - install the software...". »
  Go to control panel, system, hardware, Windows Update properties, select never 'search Windows Update for drivers'

  7. now you must configure your Internet connection and activate your Windows so that you can run "Windows Updates" from the Microsoft Windows Update Web site
  Your Internet may need one of the following drivers (depending on your Modem)
  A if you your Internet through LAN then install the 'network' of the driver Cd driver.
  B if you your grace wireless Internet then install the wireless network driver "" of the driver Cd.
  C if your Internet via USB then install the driver provided by the manufacturer of your Modem.
  D if your Internet through Dial-Up connection and then install the "audio driver" driver CD, this driver will install the audio driver and activate the Modem device and a Message appeared "find new hardware, peripheral Modem" ignores the Message and restart your PC then install "Modem Driver" of the driver Cd.

  8. now, go to the Windows Update Web Site and install all required updates "try to run Windows updates several times until you install all updates, because initially, Web site will updated Windows Installer 3 files only after this restart, your computer and go to the Windows Update Site again and continue to install updates. ", select the custom updates and install all critical and optional updates to date."

  9 - install "Common Modules" of the driver CD this module is an essential component on Windows XP systems, it is necessary to other original programming TOSHIBA works correctly.

  10 continue to install the other drivers and Utilities CD of drivers, but do not install the drivers following: -.
  Atheros Client Utility "no need".
  Bluetooth Monitor "do not install, install only the"Bluetooth Stack".

  Enjoy your PC powerful Qosmio Toshiba laptop.

  Hi Reaver, thanks for the installation instructions wonderful. I think that you have contributed to many users here.

  Ciao

• Xbox 360 and Windows XP Media Center Edition 2005

  Hello

  Hoping to get help with this, because I searched everywhere and had not found an answer.  All the work around the items, reference Windows 7 and 8 not XP my Dell Dimension C521 shipped with Windows XP Media Center Edition 2005 pre installed.  I've upgraded to SP3 of XP.  A friend of mine gave me his old Xbox 360 (bought a new unit).  When I try to connect to the XBox 360 I get an error message in media library "uninstall the update for media center 2005 and then re-install the update of the site Web of Windows update.  Then, re-run Setup for Xbox 360'

  I checked in my under settinds program control panel, but don't see any element for Media Center 2005, even with show checked all of the updates.  I don't see Media player listed and 2 updates for it.  I have disabled the Windows Firewall did not help.  The Xbox 360 test shows that I can connect to the internet, Xbox Live (no NAT problems) and PC running Media Center.  It fails on the media center connection test.

  I don't want to reinstall all of the Dell backup image software supplied with the camera, I'll have to back up and start over.  Any help is welcome!

  Thank you

  Matt

  Hello

  Thanks for posting your question on the Forums of community of Microsoft.
   
  I suggest for the link and follow the steps in the article:
   
  Error message when you try to install a program for the Xbox 360 Media Center Extender in Windows XP Media Center Edition 2005 with Service Pack 3: "There is a problem with the installation of Windows XP Media Center Edition 2005"
  http://support.Microsoft.com/kb/954622?WA=wsignin1.0
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/ )
  How to back up and restore the registry in Windows.
   
  Also see Help links:
  Turn your Xbox into Windows Media Center Extender
  http://Windows.Microsoft.com/en-us/Windows-XP/help/Extender-for-Xbox
   
  http://support.Microsoft.com/ph/7024
   
  Windows Media Center on the Xbox 360
  http://support.Xbox.com/en-us/apps/Windows-Media-Center-on-Xbox-360/Windows-Media-Center-on-Xbox-360-Info
   
  I hope this helps.

• I have Windows XP Media Center Edition Version 2002 with Service Pack 3 and I tried to run Media Center but I get an error message with ehshell.exe.

  original title: error with ehshell.exe

  I have Windows XP Media Center Edition Version 2002 with Service Pack 3 and I tried to run Media Center but I get an error message with ehshell.exe. Could you help me?

  This problem exists since the 1st Media Center. SP2 and SP3 had a difficulty, but it is obvious that it doesn't always. The same problem still exists in Vista today with a lot of other carried over from XP. System restore would work, but you do not have any good restore points so reinstall an operating system seems to be your only option.

  You probably don't want to do an OS reinstall you need for Media Center, but since it does not at all, you might want to play then remove the Media Center updates and or SP3 and reinstall them.

• Problem, reinstall the Update Rollup 2 for Windows XP Media Center Edition 2005

  I have problems with MCE 2005.  My hard drive crashed and the technician that restored my repressive said that he could not work in MCE 2005.  It's a shame because he was working before the hard drive crashes.  I work with windows XP.
  When I go to install the internet and begin to test the connection it gives me "Critical error of process - Code 2"
  When I go to the TV configuration, it tells me "Tuner not found".  Even if I know it works because I also Win TV7 in Hauppauge. My TV tuner is HVR-1600.
  With these problems, I thought that the solution might be to reinstall rollup 2 according to the Microsoft.
  http://support.Microsoft.com/kb/910905
  However, when I go to reinstall the Update Rollup 2, it seems to be to establish a restore point and then it stops when it hits hotfix (KB891593).
  I took a copy of the mcelog and have attached a copy of the log below.

  Assistance or management, you can provide me to solve this problem would be highly appreciated.

  At this point, I'm a newbie to this and I don't have a clue as to the cause of my problems and any ideas you may have for me would be much appreciated.

  A generic Package: 10/28/10. 21:32:48
  Looking for an existing installation of the generic package

  A generic Package: 10/28/10. 21:32:48
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB891593 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1046.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package

  Process creation: WindowsXP-KB895961 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1047.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB899337-v2 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1043.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB899510 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1043.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB888795 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1043.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB902841 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1043.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Creation process: KB900325.exe/quiet /norestart
  0x00000bc2 returned by process

  Function (ExecCmdInThread) Message of Post for the Package id: 1048.

  "Creative process: c:\0f7019deb34a2ccd3d5c2a4d9e4f3e57\bin\wmfdist95.exe/q: a/r: n /C:"wmsetsdk.exe/WMFDIST/q/r: n /DisallowSystemRestore.
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1044.

  A generic Package: 05/12/11. 21:26:14
  Looking for an existing installation of the generic package

  A generic Package: 05/12/11. 21:26:53
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000643

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  A generic Package: 06/03/12. 21:27:50
  Looking for an existing installation of the generic package

  A generic Package: 06/03/12. 21:28:23
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000643

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  A generic Package: 12/02/13. 09:44:39
  Looking for an existing installation of the generic package

  A generic Package: 12/02/13. 09:45:16
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000643

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  A generic Package: 12/02/13. 10:11:58
  Looking for an existing installation of the generic package

  A generic Package: 12/02/13. 10:12:30
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000643

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  Hi kwanray,

  Welcome to the Microsoft community. According to the description of the problem, you can not reinstall the Update Rollup 2 for Windows XP Media Center Edition 2005.

  I'll help you with this problem. I suggest you follow the steps in the article.

  Update Rollup 2 for Windows XP Media Center Edition 2005

  Reference: Support for Windows XP Media Center Edition 2005

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Update of XP Media Center edition after system restore

  I had to do a restore of the system on my XP Media center edition computer.  I now try to update the program installed at the factory.  It won't let me update.  Any suggestions?

  I had to do a restore of the system on my XP Media center edition computer.  I now try to update the program installed at the factory.  It won't let me update.  Any suggestions?

  You mean the Windows updates?

  Refer to this post:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/how-can-i-get-Windows-Update-error-x8024400a/35ba7694-c9b2-4043-a4c0-777d4b7736dc