Restoration of xperia zr to original sony kitkat 4.4.4 stock rom with root access

Similar Questions

• Sony Xperia tipo stuck in Sony screen

  Hello, Sony Support.
  Therefore, what is happening to me:
  I tried to install a new ROM, factory reset, format hides, all this, but when I rebooted, my Sony Xperia tipo got stuck in the Sony screen. I waited for 2-3 hours, but nothing.
  I also tried the Update Service, but it says I have the latest version available.
  What should I do? Really need help!

  PS My Sony Xperia tipo had locked bootscreen and the available unlocking bootscreen: no, but I managed to find and install the MCG for locked bootscreens and find a ROM for locked bootscreens... I did it wrong?

  Edit: P.P.S. Update Service not implemented to date actually says, there or anything like that for me. Please help me!

  Nevermind, fixed it by myself. I didn't like a few measures freaking weird to fix it, but I managed to fix it.

  So, you tried to flash a ROM but did not work as expected? Then tried to fix the phone via PC Companion or a Sony update service, but did not work? Then I tried to Flash via Flashtool but it got stuck? This happened to me, but I managed to fix it! And the solution is there for you guys!

  Everyone knows these problems must follow the following steps:
  1 - Download these files:
  1.1-1.2 - http://forum.xda-developers.com/attachment.php?attachmentid=1541928&d=1354812913 of the http://forum.xda-developers.com/attachment.php?attachmentid=1541927&d=1354812913

  (these files are for Xperia J but also works for Xperia tipo and Miró)

  2 extract the files

  3 - Connect your phone normally. Do not connect in fastmode or flashmode, just connect it to the computer.

  4 - Open the files that you have extracted from Root_J.zip and run RunMe

  5 - Choose option 1 and click on enter

  

  6. it will push some files on the phone. After pressing the files, it will ask to select RESTORE in the phone and it will tell you if it worked, but ignore it, because you can't do anything in the phone. So just close RunMe.

  7. with the phone still on, go to the files you have extracted from CMW_J.zip and start install

  

  8. you have to push some files to the phone and when he finished it will be back up a few things. He will say that he finished, so now you can close the installation program.

  9 - disconnect the phone from the computer and remove the battery for 10 sec. Then put the battery and switch on the phone by clicking flight-button repeatedly. This will bring you to the menu of the CWM. (don't worry, I know that your phone has been blocked on the logo sony like mine, but it works, just keep hitting the button flight-while in the sony logo)

  10 - now that you are in the menu of MCG, connect your phone to the computer. This will make the computer install new drivers, because you are in the menu of MCG. After that, disconnect the phone from the computer and remove the battery. Leave it like that.

  11 - Download flashtool by here: http://www.4shared.com/file/JMFhqX8K/flashtool-0990-windows.html (you will need to an account registered, but don't worry, you don't have to pay)

  12 - and download Sony XPERIA tipo rom stock by here:http://xperiafirmware.com/8-firmware/24-sony-xperia-tipo-st21
  

  
  (you need to register here, but don't worry, also unpaid)

  13 - now that you have these files, install flashtool. Once installed, the firmware downloaded on C:\Flashtool\firmwares. Then go to C:\Flashtool\drivers and open the Installer package.

  14 - click Next. Now, a lot of drivers for select should appear. Go down and select Flashmode pilots and Fastboot. Only. These. Two.

  

  15. it will appear (sorry for the Portuguese language) (just click)

  

  16 - a warning will be displayed. Simply select that you have confidence in it, and're you good to go.

  17. now, open flashtool and connect your Xperia tipo via flashmode (put on the battery, make sure that the phone turns, and then connect the cable to your phone while holding the button flight)

  18 - Flashtool, will recognize everything as you can see in the following picture:

  

  19 - click on the lightning button in the upper left corner. This should appear. Check Flashmode and click OK.

  

  20 - a screen with the firmwares should appear. Select the ST21i firmware, make sure the "without final check" is not checked and wipe CACHE and DATA are checked and click flash. Does not check for other things, or you will ruin the solin.

  21 - Flashtool will prepare the files, and then the flash on your phone. If you have done all these steps correctly, Flashtool will not get stuck again. Well well, just for 1 to 5 seconds maybe. But then it will continue.

  22 - be patient and wait for flashing the ROM. When it flashes system.sin, it seems that late, that it gets stuck, but isn't. Just be patient. Wait for 1 to 5 minutes or less and it will finish.

  23 - once finished, you can now unplug your phone and start. It will take you 2 minutes. the first boot, just be patient. It will stay dark for a while and it seems that he died in the Sony logo. Just keep pressing the power button / stop and you're good to go.

  So there you go! Long steps but I could not make it easier. But don't worry, your phone is now its stock rom, but it works correctly. So I think you just learned a lesson like me: don't try to do stuff without properly follow the steps, heheh.

  Also, sorry for spelling errors, I'm Portuguese, heheh

  I hope I helped you! If I did, please click that button. Have a great day!

• Need instructions on how to use the recovery Partition to restore my OS to its original state.

  I need to use the recovery partition to restore my OS to its original state.  I'm getting crashes (invaded by "dumprep.exe" CPU cycles) and an occasional BSOD.

  What brand is your computer?  Some computer manufacturers, including Dell and HP, have a recovery partition on the hard drive of the new computers.  By pressing a special key combination when the computer starts, you can use the recovery partition to restore the computer to the way it was when it was new.  Looking for a message about the recovery options on the first screen that appears.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• I lost my recovery for Windows Vista disk. How can I restore the computer to its original factory State?

  I lost my recovery for windows Vista disk. How can I restore the computer to its original factory State? I can't find how to create recovery discs, I did not have this option in the Recovery Manager

  Hello

  Here are the different ways to reinstall vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  Save all data, because it will be lost, do the above

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Need help to restore my laptop to the original operating system is

  I accidentally installed 3 different operating systems on my laptop on a hard drive external that I had saved them on because we have hacked a year ago on 2 of the 3 calculates so my son saved our systems for us in case it happened again. Now, I have all 3 on my laptop and need to restore my laptop to its original files. I have a mixture of things here on my PC and my husbands xp and my laptop vista. Help. I don't know if the other 2 systems can be saved on my external hard drive or not. I have my product key for 3 computers.

  You are welcome.

  As you never have a drive to buy, this is how you should be able to reinstall Vista on a Toshiba using the recovery partition:

  https://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/bulletinDetail.jsp?soID=2737864&PF=true

  You can see if it works but it is probably destroyed by installing these backup Images.

  If it is not available, try and get the Toshiba recovery disks or borrow a DVD of Microsoft Vista according to my first answer.

  See you soon.

• I want to restore the system to the original factory State.

  I want to restore the system to the original factory State. I did a disk backup set when I bought my computer laptop hp pavillion dv6823us origin and does not matter if I try to use or to start and try F11, or work. Device Manager indicates this cd rom works and has the latest version of the driver. When try F11 after restarting, nothing on it go to the desktop. I have tried games, music CDs and other disk and I can hear it hum and flashes but used read nothing. ID appreciate any help. Running Windows Vista IE9

  Hello

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

  ________________________________________________________________________

  Here are the different ways to reinstall Vista, if the recovery discs, you have done do not work

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  HP is F11

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• How you restore your file to the original before closing?

  I open a file, and change margins. I did two upward on a page. Now, I want to change it it is original. Just close these days, he recorded with my changes. Then, how do return you your file to the original before closing? Thank you.

  Open your two-seater document in Pages ' 09. In the lower left corner of the status bar, click the indicator at the top of this menu, and percentage change two places for a spot. Save your document. You should resize your document down to its size of single page, before saving, as the Pages ' 09 will do that for you when you switch back from two places.

• How to restore my computer to its original settings

  I am selling my computer hwow can I remove power from her

  Depends on how paranoid you are, and if your computer is equipped with a provided by the manufacturer "restore hidden partition."

  When a computer manufacturer sells you a computer with Windows preinstalled, part of the Microsoft license agreement requires that it provides a way to reinstall the operating system.  In the old days, you will get a physical media (CD or floppy disks even), but for a number of years, manufacturers have been rather including hidden software on the disk hard drive that by operating, restores the computer to the way it was when it left the factory.

  How this restoration software is started depends on the brand and model of your computer.  See your user's Guide, go to the website of the manufacturer of the computer or identify the make and model in a response here.

  Running these software in general should replace anything currently on the hard disk, including your personal information.

  For more security, before running the software 'restore', you can delete any personal data that you know (there are still a few traces in the Windows registry and other locations of the system), and then run a utility that wipes free space and soft space on the disk.  See http://www.techsupportalert.com/best-free-secure-erase-utility.htm

  If you have a Windows installation CD to give to the buyer - or if you do not care to sell a computer without an operating system - download Darik Boot and Nuke (DBAN).  This utility will erase safely any hard drive, including the operating system.

  The extremely paranoid, including some administrations in three letters, remove hard disks and either keep for reuse or physically destroy them (by cutting, drilling, or fusion).

• Sony DR - BT50 Bluetooth Headset is compatible with Windows 7?

  Original title: Sony DR - BT50 Bluetooth headset

  I would check some information. Is it true that the Sony DR-BT50 Bluetooth headset is NOT compatible Windows 7? Thank you.

  Hello

  Sony DR - BT50 Bluetooth Headset is compatible with Windows 7 32-bit operating system, but not with the 64-bit operating system. Check the link for more details:

  Windows 7 32 bit

  http://www.microsoft.com/Windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=Sony%20DR-BT50%20Bluetooth%20Headset&v=Sony&uid=DR-BT50&l=en-US&pf=0&pi=4&c=Communications%20Devices&sc=Headsets&os=32-bit

  Windows 7 64 bit

  http://www.microsoft.com/Windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=Sony%20DR-BT50%20Bluetooth%20Headset&v=Sony&uid=DR-BT50&l=en-US&pf=0&pi=4&c=Communications%20Devices&sc=Headsets&os=64-bit

  See also:

  Stereo headset Bluetooth Sony

  http://eSupport.Sony.com/us/Perl/model-home.pl?MDL=DRBT50&template_id=1&Region_ID=1&tab=HOWTO#/howtoTab

• My PC crashed. Restored on a new record and a new installation of FireFox. I can still access all the files. How do I take the old bookmarks if there is no backup?

  My PC crashed. Restored on a new record and a new installation of FireFox. I can still access all the files on the old drive. How do I take the old bookmarks if no backup exists, or has been completed? Does not save bookmarks of FireFox auto? If, then what is the file name and where is normally stored by FireFox?

  In fact, it can be easier...

  If you have the old drive connected as, say, drive E, go to:

  E:\Users\username
  

  Then click in the address bar and paste it after this and press ENTER to open it:

  \AppData\Roaming\Mozilla\Firefox\Profiles
  

  Normally, you have only one file, which has a random string followed by "default." In this case, click on this file and find the subfolder bookmarkbackups.

  If you find multiple profile folders, look inside to find the most recently updated backups.

  To restore the backup files, see: restore bookmarks from a backup or move them to another computer

• HP slate6 voicetabii 6300ne: stock rom original hp slate 6 voices tab ii 6300ne

  Buongiorno mi chiedevo is e possibile avere stock rom original del mio hp slate voicetab ii 6300ne, negli ultimi giorni da mi a sacco di problemi e reinstallare I wanted it tutto con una nuovo sitema operating system, ho tried a rate reset di fabbrica my non ho solved grazie saluti

  Hello, I was wondering if it is possible to get the original point ROM on my hp slate voicetab ii 6300ne, these last days, it gives me a lot of trouble and I tried to reinstall everything with a new operating system is, I tried to do the factory reset, but I have not solved thank you.

• need to take my computer back in the day that I first started it on7/21/2011 my restore point back up to now how can you start over from scratch with no disc?

  need to take my computer back in the day that I first started it on7/21/2011 my restore point back up to now how can you start over from scratch with no disc?

  Most OEM computers have a partition on the hard drive, that allows to give it bought as provided.  Usually, you activate this feature by pressing a key or combination of keys when the first splash screen appears at startup.  Look quickly at the first screen that appears, and you could see the key that you press.  Otherwise, go to your computer manufacturer's website and download the manual for your computer.  Instructions must be there.

  HTH,
  JW

• Sony Vegas Pro 9 does not work with QuickTime or MP4 files

  My Sony Vegas Pro 9 does not work with MP4 files or all the Quicktime files. I know this doesn't have much to do with Windows XP but I just thought I would ask, if you need any information I would be happy to give you.

  Take a look at what it fixed my problem with Vegas platinum 9.0.
  http://www.custcenter.com/cgi-bin/sonypictures.cfg/php/enduser/std_adp.php?p_faqid=4787&p_created=1254146741&p_sid=q91HHDok&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9NCw0JnBfcHJvZHM9MTcmcF9jYXRzPSZwX3B2PTEuMTcmcF9jdj0mcF9wYWdlPTEmcF9zZWFyY2hfdGV4dD1tcDQgcXVpY2t0aW1l&p_li=&p_topview=1
  This is a link to the FAQ from Sony

• Sony Handycam DCR-30 is not compatible with this version of Windows.

  Sony Handycam DCR-30 is not compatible with this version of Windows.
  Error message:

  Because this device is not compatible with this version of Windows, and there is no solution for this problem, we recommend that you find another device on the following Web site: Can can not solution on the Web site.

  Hello Nicolio,

  Thank you for your message.  Did you mean DCR-HC30?  If so, click HERE and select your operating system from the pull down.  You should be able to find the correct drivers from the Sony site.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• MY sony handycam TRV11E is not picked up with the IEEE 1394 card in Windows.

  MY sony handycam TRV11E is not picked up with the IEEE1394 card.  I had installed Pinnacle and worked properly.  Subsequently, I remove pinnacle and install Platinum Sony vegas, now not working not not and does not detect not not the device.  I did nothing on my PC before or after, with the exception of all updates. I run XP and not even Windows 7 or Vista.  During some attempt at intervals of 2 windows gave me half a detection to ask with what program I want to run my DV on.  Then nothing.  Thanks for the plug-and-play.  What can suggest you I do.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner