Restore backup after the reset Time Capsule (1st generation) using Windows PC

I apologize if this question is somewhere already. I tried to find an answer and I've seen similar discussions but not exactly what I need.

A bit of history... The location is a small school with about 10 cameras, its network systems, point of sale, cloud networked storage, etc. Was asked by the owner to create or activate a Guest WiFi SSID. They said he worked at the same time, but some work was done by a previous technician and they lost the WiFi of comments.

So I used the Airport utility to access the time Capsule. However, after the change to the next level (enable the public IP sharing? maybe?), he ended up destroying the entire network, as in nothing was back upward when the utility scanned for devices. Even the Time Capsule was not recognized by the utility. I ended up doing a hard reset on the Time Capsule and do my best to manually configure the device again, even though I was not initially designed the network. I have also discovered that 1st generation Time Capsules have no comments WiFi capabilities.

To make a long story short (too late... "I know sorry..) .. I got most of the features, functions, etc. on the network back where they were before, with the exception of camera systems and a network storage device active cloud to the owner's House.  What I would like to know is... Since then, I understand that a hard reset does NOT erase the backup or other data on the shared disk in the time Capsule... is there an easy way to restore the settings of all of the time Capsule before the problem occurred?  I would need to do this using a Windows computer.

Any help will be greatly appreciated. What I'm trying to avoid the most is having to reset all the cameras, which are upstairs, hard to reach areas. I guess that people who were previously assigned on the cameras must still be there. If only I could get the Capsule of time exactly where it was before he went down, which would allow me to save a lot of time and frustration.

You can also (2nd choice)... If there is a simple way to detect the active network cameras and other devices on the Time Capsule and pull the IP out of them, that would be helpful as well.

Thanks in advance for answers!

What I would like to know is... Since then, I understand that a hard reset does NOT erase the backup or other data on the shared disk in the time Capsule... is there an easy way to restore the settings of all of the time Capsule before the problem occurred?

You have my sympathy all...

Been to this place before today... and I always get myself into it by pure stubbornness... I should just walk on some of these jobs and tell them too hard...!

What you had to do was to export the configuration before you start playing. Without export of the configuration there is not much hope of healing to less than the previous tech saved a configuration to the unit... This example gets much delicate.

The TC is actually able to contain several configurations... There is a good chance, however, that wipe you the.

Anyway... coming to the serious Tin. (same version on Mac and PC utility should work the same).

Here's my TC who foolishly a reset.

When I do something... first manual configuration, I wonder is to revert to the previous version.

You have done or could you saved the previous settings as a profile... I hope that you did... in the hope...!

IF so, you have a saved profile.

In the area of the top menu go in manage profiles.

Now, if you are lucky or did the job just last time... by accident... you'll have a saved profile... Just click back.

If nothing is there, or it's current settings... Sorry, but you didn't know something was there... and you cannot was expected to know the trouble you would get yourself in.

If you have changed a setting in the TC of the bridge in router mode...

(enable the public IP sharing? maybe?)

Getting back to what it was... mode bridge being the most common.

At the bridge of the TC does control most things... and you need to return to the main router.

If the TC kicking upward a stench to return to the bridge, reset it simply still once and then bridge will work... It would be useful to loads to remember what was the setting... just to see the bridge takes the TC of the equation to know where the cameras are.

If the cameras are on static IP, they will respond to a ping scanner... If the primary router is configured for a standard range of IP addresses... 192.168.1.xxx some.

Then the TC in bridge must have also taken an ip address in this range and the cameras (Ethernet or wireless)?

I hope that ethernet, but if they were using the TC as a wireless access point, unless you know exactly the SSID wireless as it was in the past then you do not have this info...

Look at any computer, they have in the building that was running wireless and watch all the SSID that they use... one of these is likely the TC and you can restore this name.

Or drop a camera... and ethernet allows to connect to him... and find the ssid, that it's been fixed... redefine the TC on this name (SSID) wireless security... all cameras must be able to connect to it... and you can then restore the entire system by connecting to the IP address that will be displayed in the list on the main router.

Good luck.. as says Han Solo... you'll need!

Tags: Wireless

Similar Questions

  • should my time capsule be connected with a cable for backups, after the initial installation?

    should my time capsule be connected with a cable for backups, after the initial installation?

    If you mean that you have to keep your Mac connected to a Time Capsule via Ethernet for future backups, then the answer is no. Time Machine and time Capsule are designed to work over wireless for your Mac would just need to be connected to the wireless network provided by the time Capsule.

  • Since the upgrade to El Capitan my automatic backups on my Apple Time capsule do not work

    Everything worked fine until I upgraded to El Capitan... now I don't have enough space for back ups on my time capsule (1 TB is) and a couple of years.

    What can I do simple?

    Thank you

    You have 3 options.  Ranked in order of the most expensive on the down...

    (1) add a new time Capsule and start backups goes to this device. It is also the easiest option.

    (2) add a USB hard drive to the existing time Capsule and start going that animate the backups. Next best option in terms of simplicity

    (3) delete the existing and any time Capsule hard drive start over with new backups. Not too difficult, if you're good by following the instructions

  • Time Machine (on Mac) does not detect the airport Time Capsule

    Originally posted on the page of the airport, but seems to be the better question for this group. Sorry for the double post

    Looking for advice on how to get the Time Machine utility for access to my Time Capsule. I use an iMac in late 2012 with MAC OS 10.12 TimeCapsule is 2015 7.7.7 running latest firmware. Airport utility is the latest firmware 6.3.7.

    When I run the application Time Machine, Time Capsule is not detected. I tried the two WiFi and with cables connected Ethernet (not tried USB yet) and my Time Capsule doesn't have a lightning bolt or firewire ports.

    Open Airport utility & see the airport time capsule. I can see all connected devices, including the MAC, but no prompt activation Time Machine on the Time Capsule.

    I recently used TM on this iMac with a G-Technology drive. It auto detects the time machine and executes a back up. But airport Time Capsule will not.

    Any suggestions?

    Sierra has been problematic with the TC.

    1. make sure you don't have any charge virus protection software. In fact, I would say that disable all software 3rd part at the moment.

    2. make sure that you can actually write to disk of TC.

    Attach the TC disc in the finder and copy a file on disk, you can delete it later... It's just to ensure that you have full write permission. If it does not for the most part, you won't be able to use Time Machine... If you can then try TM immediately...

    Just to be clear, the TC is a network device. You have tested with ethernet and wireless... Ok.. They are only suitable methods. You cannot use USB. And clearly, TC has never had nor will never be ports Firewire or lightning.

    3. no chance that a reset complete TC. This will not delete the files on the hard drive, but you must make sure that the device is configured on the current computer.

    4. There are many positions in these days... read through them and do some research. Sierra is a bleeding edge new... So wait you to spend a lot of the precious liquid if you choose to be an early adopt.

  • How to free up disk space on the airport time capsule?

    I want to add a new macbook to my time capsule 2 TB airport but I get the error message "needs space". Is there a way to free up space without erasing the whole time capsule?

    Only by deleting the files in the backup itself. If you use Time Machine, then you'd that uses the Time Machine application. It would be much easier to erase the drive in the time Capsule.

  • Parameter problem to the airport Time Capsule

    Already, we currently have a WiFi system with a NetGear router and a modem from Time Warner.

    I just want to use the airport Time Capsule to back up my Mac.  My husband has a PC.  I followed the instructions but the airport still comes up in the utility.

    Mac OS X El Capitan 10.11.6 and the latest 802.11 ac 3 TB so I don't know what I'm doing wrong.  I plug an Ethernet cable at the airport, then in the Modem - nothing after I plug the power - Amber flashing light.  I have changed ports unplugged and plugged back in French - restart the Modem.  Nothing works.  I bought it so it would work straight out of the box - so far, I have spent a lot of time trying to understand it.

    Any help would be so appreciated!

    Hello

    Try the help in this support article > Wifi hotspot: understand and resolve a blinking light of amber status - Apple supported

  • How to perform a manual backup full with airport Time Capsule

    I want to switch to OS X Yosemite.  Before I do that, I want to perform a full manual backup of my system at the airport Time Capsule.  I was not able to find instructions on how to perform a manual backup by using the existing time Capsule.  Thank you.

    Dick C.

    Go to the Time Machine icon in the menu bar and click on NTI Backup Now

  • Reset Time Capsule

    Recently we have updated the modem cable from our ISP.  They feared that I had "bridged" their older modem with our Time Capsule from Apple and they have suggested that may have impeded the reliability and power of the WIFI signal.

    While the installation crew got TV HD on cable and update the connection wifi and pw on most of our devices, they do not affect the Time capsule and Airport Express units. I found a great set of instructions of Bob Timmons referenced as thread 7371984 I went to reset the Time capsule and everything seems OK.  My question is - O of can now disconnect the cable between the cable modem and the Time Capsule?  Or it is part of the permanent set up now?

    How works the time Capsule, it's having its own network that the internet modem simply provides a wifi signal. Which means if you have the modem (thus has its own network name) plugged in you use the name of the network of the time Capsule (everything you have created) (with the modem wifi signal) and if you unplug the modem from the time Capsule... both the Capsule and the modem will continue to work separately.

    The modem makes a wifi signal

    Time Capsule provides a signal to connect on its own

    The two will work alone, as if you didn't know it

    However, unable to connect to two different wifi at the same time with the same camera signals and this is why you use the modem connected to the time Capsule so the time Capsule has the internet and you can use with the internet time Capsule.

    I hope this helps.

  • HOW THE AIRPORT TIME CAPSULE WIRELESS NETWORK IS PROTECTED?

    I implemented the airport Time Capsule, using a DSL modem connected to the internet as its bridge.  MacBook Pro was used for initial set up by the bolt of lightning to Ethernet connector and then disconnected and works perfectly.  Now, I would like to use Wi - Fi for my Samsung phone not iOS.  On the Samsung wireless I connect to my home network using a password.  Well, I don't think that a password was never set.  How can I configure my wifi at home to establish a password?   I don't think that the modem settings should enter in solving this for me, but I'll add that the modem required a static IP address be entered for this connection when its router features have been disabled for the connection of bridge.

    If the Time Capsule (TC) provides the wireless network, then you can secure it using AirPort Utility, as follows:

    • Run the AirPort Utility.
    • Select the TC and then, select change.
    • Select the wireless tab.
    • In the wireless security, select the type of security. I highly recommend that you choose: WPA2 Personal
    • Enter a password in the field password wireless. Enter the same password in the verify password.
    • Select Update.

  • How many ethernet modem ports should have to support the airport Time Capsule

    I have a question: how many ethernet ports if a modem must support the airport Time Capsule?

    One (1)

  • use time capsule 4th generation to extend the network

    Can I use the time Capsule (4th generation) to extend a network? I would like to connect via Ethernet to a router (Belkin) of non-Apple. Thank you.

    -> Belkin router-> Ethernet cable modem-> Time Capsule-> wifi network products in another part of the House

    Yes, it works perfectly.

    The TC will be in bridge mode...

    The wireless will be defined to create a wireless network.

    You can use the distinct name to the Belkin Wireless... or you can use a name identical to the Belkin with identical password wireless and security setting... This is called roaming network, so in theory, you can wear around your wireless devices and they swap "tours" as a mobile phone... Sounds good in theory... a little less than the sum of the parts actually.

  • Cannot be trusted to 8 PC after the reset of the Windows operating system

    I had the hard drive on my HP Windows 8 AIO problems, so I had the computer fix it. After that, I can launch is no longer one of the Windows Store applications. She was corrected after the update via "refresh everything and reinstall Windows. Now, I no longer have this PC done trust. I tried to have the PC checked via my cell phone to the point that it is said that the PC has been verified, but no luck. Remove all the trusted devices and try from zero has been a no-go. Please help me get this PC done trust again.

    PS: On the first refresh attempt, Microsoft Account page gave me this message as a result of the audit:

    "Secure devices."

    Visit the https://account.live.com/trustdevice on Internet Explorer for the Windows 8 device that you do not want to trust. »

    Hello

    Sorry to understand that you are facing the question of trust that PC. Let me help you with this problem.

    Have you visited this link https://account.live.com/trustdeviceusing Internet Explorer?

    If you have removed all trusted devices, simply wait 30 days for all of the information to be removed and new security information to be confirmed automatically.

    For more information about trusting your devices, see this link:

    http://Windows.Microsoft.com/en-us/Windows-8/what-is-trusted-device

    Follow this thread and see the comments by "Praseetha K Nair" on September 6, 2013 which says that this problem can occur if you have already selected the device as being approved.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-Security/Windows-8-trust-this-device-not-working/6ca08cc5-7e7f-4061-9351-1451976e7578

    Hope this information helps. If you have any other questions, we will be happy to help you.

  • I get a message that says that it is not backup because the backup of the disk image is already in use

    I get a message that says that it is not backup because the backup of the disk image is already in use

    If you have a Time Capsule...

    Make sure that no other Macs back up when

    Pull the power cord to the back of the time Capsule

    Count to ten

    Reconnect the power cord to the back of the time Capsule

    Wait a few minutes and try a backup

    Report on the results

  • How can I restore and recover the database to a different server using RMAN?

    Hello Friend:

    How can I restore and recover the database to a different server using RMAN? I want to implement an enviroument which has a different enviroument and different directories.

    That's the two servers. different stored different on each server and a single link, a table library where backup set.

    I can only restore and recover the database of the Rman command. Could you give me a demo?

    Thank you

    How can I restore and recover the database to a different server using RMAN? I want to implement an enviroument which has a different enviroument and different directories.

    That's the two servers. different stored different on each server and a single link, a table library where backup set.

    I can only restore and recover the database of the Rman command. Could you give me a demo?

    Check this box
    * How to restore Rman backups on a different node when the Directory Structures are different [ID 419137.1] *.

  • I'm looking for a software that will speed up the startup time and when I use etc.

    I'm looking for a software that will speed up the startup time and when I use the computer for a while, it is slow going on the Web site? do I need a registry cleaner? Please notify. I have two computers with xp and vista.

    The only thing that's really going to "speed up" your computer is a faster processor, more ram and a faster internet connection.  Everything else is really a waste of money (IMHO)

Maybe you are looking for

  • BONES of Firefox does not appear correctly. It seems that the CSS and JS are not rendered. Any help would be most appreciated!

    I would have preferred someone show a screenshot of the web pages, but it is not a file attach on this forum. In any case, with only Firefox OS, not my other browsers, web pages didn't properly. For example on Facebook, there is no header or footer.

  • It is usable on kindle?

    I have a kindle fire THST I sm using

  • Question of PCI driver

    My has a Decive PCI driver! mark next to it, so I tried to update, and it wouldn't let me. So my question is the following how can I fix this problem? Y at - it an update for him or what I need to uninstall and re install it or what I can do? Thank y

  • Losing WIRELESS card - can't fix

    I installed the router and set up the base station wired and wireless remote station (in the room). At random intervals both computers show no connection to internet. Repair the connection go through stages and shows still not computers. Using Networ

  • Hard drive issues

    I have an inspiron 2020 with windows 7 service pack 1 installed.    Since then, I have the backup drive, and they work.   I need is no longer the Oem partition and a recovery partition.     I discovered something new.   Only the recovery partition al