Restore failed HP of Win8n after reboot when restoring to new SSD on Pavilion G6 2284 cell ca

Similar Questions

• Restoration of new SSD to timemachine

  I just put in a new SSD in my 2010 macbook pro (IIRC) 10.11.2 running.

  I have a Time Machine recently saved on an external backup. I tried to use internet to reinstall the OS, which worked. Then I sailed on my external hard drive for the restoration and my macbook sees from the outside, we see even the time machine backup, I did it yesterday but when I click on it, the following menu tells me that there is no time machine backups.

  Can I use the internet OS completely install and then use my outside for the Time Machine? But if there is a new version downloaded from the internet, which will interfere with the version that I have backed up on the outside?

  You may need to run TM at least once to get the dialog box "inherit the old TM" to appear, until it is recognized as a viable backup for your new drive.

• Difficulty of startup disk after copying the OS to new SSD

  This morning and used EaseUS partition wizard to copy the recovery partition, OS partition (C :) and unnamed in the SSD partition, I received a shiny new SSD. I should have used one of the many software migration available but I didn't, so I've been running a few problems. I have everything but the d: more expanded and copied in the new SSD drive C (on the SSD) to occupy all of the space allocated.

  From there, I set my BIOS to boot from the disc SSD and Windows loaded normally, so I assumed that the new drive was working how I wanted and erased everything except the D drive on the old drive. After the reboot, I have met with a cursor flashing instead of the windows logo 7.

  After some research, I think my problem might by one of the following:

  The operating system on the new drive partition was not set up active, is not loading at startup.

  The system partition does not recognize the new, larger OS partition and must be reset to match the new partitions.

  The OS copied on the new SSD is simply not bootable.

  I used my laptop (Ubuntu) to check the SSD drive, and all the OS files are there, exactly how I expected to be after you copy the files using EaseUS.

  I have the Windows 7 installation disc, as well as the old HDD and the new SSD. I can do to fix the OS on the SSD so that I don't have to do a new clean install, or who is my best option?

  Thank you, Ty

  Hi TySimmel,

  Thanks for posting the query on Microsoft Community.

  I appreciate your efforts and your time.

  I suggest you try the steps in the link below to check and the system recovery options, if it helps.

  http://Windows.Microsoft.com/en-us/Windows/what-are-system-recovery-options#what-are-system-recovery-options=Windows-7

  Please get back to us with the information required to help you further.

• WebLogic Admin server fails to start after reboot

  Hi gurus,
  
  WebLogic Admin server starts after a reboot of the server. Note that weblogic has graciously stopped before restarting.
  
  Also note that the following files have been accidentally deleted after reboot (but I don't think that that should cause a problem..):
  / opt/Shared/Apps/Hyperion/Oracle/middleware/user_projects/Domains/EPMSystem/Servers/adminserver/Data/Store/default/_WLS_ADMINSERVER000000. DAT
  / opt/Shared/Apps/Hyperion/Oracle/middleware/user_projects/Domains/EPMSystem/Servers/adminserver/Data/Store/Diagnostics/WLS_DIAGNOSTICS000000. DAT
  
  
  Looking at the AdminServer.log:
  
  
  * # < 11 October 2012 11:27:53 CEST > < critical > < WebLogicServer > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969273846 > < BEA-000386 > < server subsystem failed. Reason: java.lang.AssertionError: weblogic.management.provider.EditFailedException: *.
  java.lang.AssertionError: weblogic.management.provider.EditFailedException:
  to weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$ SINGLETON. < init > (DomainRuntimeServiceMBeanImpl.java:79)
  to weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$ SINGLETON.getInstance (DomainRuntimeServiceMBeanImpl.java:68)
  at weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl.getDomainConfiguration(DomainRuntimeServiceMBeanImpl.java:132)
  at weblogic.management.deploy.internal.DeploymentManagerImpl.initAppDeploymentRuntimes(DeploymentManagerImpl.java:239)
  to weblogic.management.deploy.internal.DeploymentManagerImpl. < init > (DeploymentManagerImpl.java:83)
  at weblogic.management.deploy.internal.DeploymentServerService.initializeDeploymentManager(DeploymentServerService.java:256)
  at weblogic.management.deploy.internal.DeploymentServerService.startAdminServerDeploymentService(DeploymentServerService.java:233)
  at weblogic.management.deploy.internal.DeploymentServerService.init(DeploymentServerService.java:155)
  at weblogic.management.deploy.internal.DeploymentPreStandbyServerService.start(DeploymentPreStandbyServerService.java:27)
  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
  Caused by: weblogic.management.provider.EditFailedException:
  at weblogic.management.provider.internal.EditAccessImpl.ensureBeanTreeLoaded(EditAccessImpl.java:1754)
  at weblogic.management.provider.internal.EditAccessImpl.getCurrentDomainBean(EditAccessImpl.java:241)
  to weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$ SINGLETON. < init > (DomainRuntimeServiceMBeanImpl.java:76)
  to weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$ SINGLETON.getInstance (DomainRuntimeServiceMBeanImpl.java:68)
  at weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl.getDomainConfiguration(DomainRuntimeServiceMBeanImpl.java:132)
  at weblogic.management.deploy.internal.DeploymentManagerImpl.initAppDeploymentRuntimes(DeploymentManagerImpl.java:239)
  to weblogic.management.deploy.internal.DeploymentManagerImpl. < init > (DeploymentManagerImpl.java:83)
  at weblogic.management.deploy.internal.DeploymentServerService.initializeDeploymentManager(DeploymentServerService.java:256)
  at weblogic.management.deploy.internal.DeploymentServerService.startAdminServerDeploymentService(DeploymentServerService.java:233)
  at weblogic.management.deploy.internal.DeploymentServerService.init(DeploymentServerService.java:155)
  at weblogic.management.deploy.internal.DeploymentPreStandbyServerService.start(DeploymentPreStandbyServerService.java:27)
  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
  Caused by: org.xml.sax.SAXParseException: premature end of file.
  at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(ErrorHandlerWrapper.java:195)
  at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.fatalError(ErrorHandlerWrapper.java:174)
  at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.java:388)
  at com.sun.org.apache.xerces.internal.impl.XMLScanner.reportFatalError(XMLScanner.java:1414)
  to com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl$ PrologDriver.next (XMLDocumentScannerImpl.java:1059)
  at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImpl.java:648)
  at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(XMLNSDocumentScannerImpl.java:140)
  at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:511)
  at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:808)
  at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:737)
  at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:119)
  at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(DOMParser.java:235)
  at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:284)
  at weblogic.xml.jaxp.RegistryDocumentBuilder.parse(RegistryDocumentBuilder.java:163)
  at javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:124)
  at weblogic.management.provider.internal.ConfigReader.convert(ConfigReader.java:106)
  to weblogic.management.provider.internal.ConfigReader. < init > (ConfigReader.java:70)
  to weblogic.management.provider.internal.ConfigReader. < init > (ConfigReader.java:64)
  at weblogic.management.provider.internal.EditAccessImpl.loadBeanTree(EditAccessImpl.java:1917)
  at weblogic.management.provider.internal.EditAccessImpl.loadBeanTreeFromPending(EditAccessImpl.java:1807)
  at weblogic.management.provider.internal.EditAccessImpl.ensureBeanTreeLoaded(EditAccessImpl.java:1740)
  at weblogic.management.provider.internal.EditAccessImpl.getCurrentDomainBean(EditAccessImpl.java:241)
  to weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$ SINGLETON. < init > (DomainRuntimeServiceMBeanImpl.java:76)
  to weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$ SINGLETON.getInstance (DomainRuntimeServiceMBeanImpl.java:68)
  at weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl.getDomainConfiguration(DomainRuntimeServiceMBeanImpl.java:132)
  at weblogic.management.deploy.internal.DeploymentManagerImpl.initAppDeploymentRuntimes(DeploymentManagerImpl.java:239)
  to weblogic.management.deploy.internal.DeploymentManagerImpl. < init > (DeploymentManagerImpl.java:81)
  at weblogic.management.deploy.internal.DeploymentServerService.initializeDeploymentManager(DeploymentServerService.java:256)
  at weblogic.management.deploy.internal.DeploymentServerService.startAdminServerDeploymentService(DeploymentServerService.java:232)
  at weblogic.management.deploy.internal.DeploymentServerService.init(DeploymentServerService.java:154)
  at weblogic.management.deploy.internal.DeploymentPreStandbyServerService.start(DeploymentPreStandbyServerService.java:26)
  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
  
  
  # < 11 October 2012 11:27:54 AM EDT > < opinion > < WebLogicServer > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274051 > < BEA-000365 > < changed failed State Server >
  # < 11 October 2012 11:27:54 AM EDT > < error > < WebLogicServer > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274053 > < BEA-000383 > < is not an essential service. The server will shut down >
  # < 11 October 2012 11:27:54 AM EDT > < opinion > < WebLogicServer > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274069 > < BEA-000365 > < server status changed to FORCE_SHUTTING_DOWN >
  # < 11 October 2012 11:27:54 AM EDT > < Info > < JMX > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274138 > < BEA-149513 > < JMX Connector Server stopped at service: jmx:iiop://3.56.11.196:7001/jndi/weblogic.management.mbeanservers.domainruntime. >
  # < 11 October 2012 11:27:54 AM EDT > < Info > < JMX > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274140 > < BEA-149513 > < JMX Connector Server stopped at service: jmx:iiop://3.56.11.196:7001/jndi/weblogic.management.mbeanservers.edit. >
  # < 11 October 2012 11:27:54 AM EDT > < Info > < JMX > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274141 > < BEA-149513 > < JMX Connector Server stopped at service: jmx:iiop://3.56.11.196:7001/jndi/weblogic.management.mbeanservers.runtime. >
  # < 11 October 2012 11:27:54 AM EDT > < Info > < WebService > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274146 > < BEA-220028 > < Web Service reliable agents are suspended. >
  # < 11 October 2012 11:27:54 AM EDT > < Info > < WebService > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274153 > < BEA-220029 > < Web Service reliable agents are shut down. >
  # < 11 October 2012 11:27:54 AM EDT > < Info > < MessagingBridge > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274318 > < BEA-200001 > < messaging bridge has shut down successfully. >
  # < 11 October 2012 11:27:54 AM EDT > < Info > < JMS > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274426 > < BEA-040308 > < service JMS suspends >.
  # < 11 October 2012 11:27:54 AM EDT > < Info > < JMS > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274506 > < BEA-040107 > < 8 cancelled by default connection factories. >
  # < 11 October 2012 11:27:54 AM EDT > < Info > < JMS > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274510 > < BEA-040015 > < stop JMS is done >.
  # < 11 October 2012 11:27:54 AM EDT > < Info > < JDBC > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274530 > < BEA-001144 > < Force suspending the JDBC service. >
  # < 11 October 2012 11:27:54 AM EDT > < Info > < JDBC > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274536 > < BEA-001146 > < Force suspend the JDBC service finished >.
  # < 11 October 2012 11:27:54 AM EDT > < Info > < JDBC > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274538 > < BEA-001147 > < JDBC service stop. >
  # < 11 October 2012 11:27:54 AM EDT > < Info > < JDBC > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274552 > < BEA-001149 > < stopping the completed JDBC service >.
  # < 11 October 2012 11:27:54 AM EDT > < Info > < WebLogicServer > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274694 > < BEA-000236 > < stop run > discussions.
  .....
  
  
  Kindly guide me with this. Thank you!
  
  Published by: Kent Pawar. October 11, 2012 08:51

  It is:

  Caused by: weblogic.management.provider.EditFailedException:

  A likely reason may be a few changes in the config.xml file. If you have a previous backup of the config.xml file, then try to replace the config.xml file, and then restart the server.
  Another reason for this exception maybe it were completely a few changes to the configuration through the administration Console that were not activated and the server administrator has been restarted. According to this scenario, weblogic will create a dir /pendig and have a config.xml file is created with the changes unchecked.

  a solution of workaround that you can try to restore the management server:

  Under domain dir.
  \pending directory - take backup and delete the directory.

  Under Dir Admin Server:
  data\store - take backup and delete the directory.

  Thank you
  Sandeep

• Ping IP of ESXi host fails after reboot? Newbie

  VMWare ESXi 4.0.0 ReleaseBuild 171294 - HP ProLiant DL360 G4

  The server turned craps so we got a used that even make and model and shared disks.  Now we cannot connect with the customer and we cannot ping, ping times out.  When we ping from the console we get inconsistent results, can ping ok, the first IP addy and then fails on the second ping, or it connects to the second IP addy, but fails to ping first that it resolve the hostname constantly.  We stopped and started the management network and Management Agents a couple of times but no joy.

  I have the Articles KB 1008446 ping to the ESXi host IP fails after reboot, 1003490 restart the Management Agents on an ESX or ESXi Server and 1003677 Tech Support Mode of emergency support.

  What must we do to recover the server to an operational state? If there is other information needed to help us please let me know.

  And, what distro and version is ESXi 4.0.0 inspires?  I read that it is Redhat, but I couldn't find the version.

  I have worked with Soloris, Linux and Aix over the years, so I am comfortable working from the cmd line if need be.

  Thank you

  ESXi is not Linux. The VMkernel is VMware. The small console that runs the VMkernel is busybox. ESX has a VM management based on RedHat 5, but here again the VMkernel is all VMware.

  I would check that the embedded NICs are working properly. Start with a linux rescue disk and test.

  If all extracted would reset the system configuration from the yellow Console screen. Your configuration will be lost, but your machines virtual etc. will be OK. You will need to add to the inventory.

• Cannot check iOS 9.3 during the upgrade process. When there is a good connection internet, says no internet. Tried more than 30 times, even after reboot. Any suggestions?

  Cannot check iOS 9.3 during the upgrade process. When there is a good connection internet, says no internet. Tried more than 30 times, even after reboot. Any suggestions?

  You chose the option in iTunes to download the firmware first and install it in a second time after that?

• I deleted some of my documents folder undeletable file, and after reboot, I see that lost my desktop icon, how can restore my icon file and office

  How can I solve this problem?

  Original title: with a peogram I deleted some of my documents folder undeletable file and after reboot I see who lost the icon on my desktop, how can I restor my file and desktop icon?

  Have you tried a System Restore yet?  Restore to a previous State could solve your problem.

  For Windows 7 and Vista: [link]
  For Windows XP: [link] (scroll down to restore from a Restore Point)

  Also, could you please tell us what do you delete?

  Thank you
  Digilodger

• Install PRE &amp; PSE V12 fails repeatedly even after reboot

  I have a working installation of

  • 5.3 Lightromm
  • Photoshop elements V11
  • First Elements V11

  on a PC running Windows 7 SP1.

  After the purchase of a new licenses of PSE & PRE V12 succesfully downloaded and unpacked all the files.

  but Setup process fails even after reboot and recovery point.

  

  Hello

  Please try to install the software with a new administrator account. A new local administrative account can exclude network strategies, corrupt profiles and configure administrative accounts: http://windows.microsoft.com/en-us/windows/create-user-account#create-user-account=windows-7

  If the error continues to appear, restart Windows in modified mode, and try again to install 12 elements: http://helpx.adobe.com/x-productkb/global/restart-windows-modified-mode-windows.html

  Concerning

  O´Neill_SG1

• Black screen after reboot XP

  On my husbands computer all it can get after that restart is a black screen with the cursor showing, after it does appear the welcome with the blue bar of windows mobile screen.  The computer was working fine all day, he was doing research and everything froze, his slider when placed above the start button would show only an hourglass so that he could not restart normally must manually turn off the computer. After reboot, all he got was a black screen with the cursor showing, nothing else.  I tried to boot in safe mode and chose several options, but whenever he could bring up a black screen showing 'safe mode' in each of the corners of the screen and a set of numbers followed SP3 upstairs at the center of the screen, nothing else.   I couldn't do a system restore or anything whatever, and I suspect that the problem came from the last automatic update.  I see most of the questions on this help dealing with Vista, has anyone using XP Home figured out how to fix it yet.  It's almost 4:00 and I worked on this for the last 4 hours!

  Hello

  Start in safe mode.
  Uninstall SP 3:
  http://support.Microsoft.com/kb/950249

  And perform the repair facility.

  http://www.WindowsReinstall.com/WinXPHome/sp2sp3installxpcdrepair/indexfullpage.htm

  All the best!

• ultimate performance sp2 problems, of Vistax64 after reboot

  I turned off my computer and restarted it about 5 minutes later.  When I started this new he would start slower than usual.  Once it was launched upward, everything was slow.  I tried to disable all startup programs and restarted the process, it was still slow.

  When a program starts, it works very well, but their startup is very slow and causes other programs not responding.

  Between switching programs is slow and causes others to not answer.

  I get a lot of program does not not errors.

  I did some major changes lately.

  Everything worked fine until the closing.

  running vistax64 ultimate, sp2,.

  Thanks in advance for any help

  Hello

  This was immediately after installation of SP2 or later on?

  So immediately, it's probably a conflict with SP2 and a resident as software antivirus/antimalware program. Usually, this requires a patch from the vendor of the program. Disabling any resident program is the only real way to isolate the problem.

  If "later on", then you may have a hardware problem, which means a component fails. First thing I would do is run a disk check. Run chkdsk c: /r from a command prompt and reboot when prompted.

  It runs slowly if started in safe mode?

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Setting advanced system not saved after reboot/restart

  I changed my settings of performance... then when I restart my computer... the computer is always the same as the front... I use a standard account... when I went to the administrator, it works... I want to change my standard user performance parameters. :'(

  Hi Erik,

  Using the standard user account to change settings?

  If you are connecting with a standard user account and then try to change the system of advance parameters he will automatically restore to the default settings after reboot, due to the user account permission.

  Note: If you want to change the advance system settings you must change the settings using the account administrator only.

• ESXi 5.5 build 2456374 is unable to reconnect to the vcenter after reboot

  Hello

  Have been hitting my head against it for the past few weeks. A host that has worked very well to a previous 5.5 build fails to reconnect to the vcenter after reboot once upgraded to build the 2456374. This also happens to the newly built guest. When a reconnection is started manually, it produces up to 80% (data of the host processing), then dies with a "general system error: internal error. I tried to remove the vpxa account, resetting the config network via the console, Cup NIC of the vswitch, removal of additional interfaces vkernel. The network via the console configuration reset allows me to reconfigure the net and tie vcenter and complete the host host configuration. However, as soon as I restart the host, is no longer, it reconnects to vcenter and I'm back where I started.

  Unfortunately, this is not a 100% event. If I rebuild a host enough times, one of the new buildings will finally works correctly.

  any ideas on how to solve this problem would be appreciated.

  Elmārs

  QUESTION REOLVED!

  Ok. so that was the easy part. Open a folder with vmware to identify the cause for this. After much digging, friction, pull hair, we found a clue in the hostd.log on the ESXi host.

  2015-04 - T 02, 04: 49:05.481Z [23381 B 70 error 'Hostsvc.NetworkProvider' user opID=HB-host-185064@917-1d029f4d-d2 = vpxuser] an error occurred during extraction of stack instance configuration: incompatible value of ccalgo for the Netstack instance: defaultTcpipStack.

  In my network performance test I did recently, I have significantly improved network iSCSI performance from the cubes NewReno network congestion control algorithm. For each of these hosts, as part of the installation procedure I now set the control algorithm of congestion on cube through the web interface. Finally, it is a little bug with that VMware believed fixed. Is not.

  To confirm doubling you encounter this problem, connect to the host (ssh or remote cli) and run the following command:

  list of esxcli ip network netstack

  You should get a message saying that there is an inconsistency in the netstack configuration.

  To fix, run the following command:

  esxcli network ip put netstack defaultTcpipStack cubic n - c

  the netstack from above list command should now display detailed information and will now be able to connect to vcenter.

  If I understand correctly, an article will be published on this in the near future.

• ESX 3.5 update 4 - HA does not not after reboot

  Hi all

  I was wondering if someone could help me, I have a 2 cluster nodes and during the week I had to recharge 2 servers. Before restarting HA was working perfectly, no problem but now after a reboot when they start and CIV center connection and select reconfigure for HA everything out without problem, but then after a few minutes, you can see HA fails and I need to restart the process. I have not changed anything, so I don't know why its doing. I looked through the logs, but all I can see is about 'Main vmware lost AAM server' errors and then restarts the AAM agent. I tried to restart the VIC server stop and start HA but nothing!

  Any ideas?

  Thank you

  CLL

  Maybe this article will be useful?

  http://KB.VMware.com/kb/1007234

• Not ready external hard drives after reboot

  You have a weird question, or perhaps I should say one on that I can't find something. I've dealt with it for years and finally had enough of it. Rarely, I restart my Mac, do not need, is not something that happens often. But on the question.

  I have an iMac of 2015, internal SSD, or merge, I suppose, and a couple of external hard drives attached. Both are 4TB readers, by USB (for backups) and FireWire (for data, applications, iTunes library, photos, etc.). Both work perfectly during normal use.

  The question is when I reboot. My hunch is that these external drives are not fill their mental health checks / faster the drive internal system files, and when the OS is logged in, all the stuff on my external drives (in this case, my iTunes library) is not found. Of course, everything I do is point iTunes to the external drive and everything is fine (well, that and tell him where to find my wallpaper because it doesn't by default mountain landscape photo!).

  So I'm wondering - is there a way to delay the start of the BONE or the final control until external drives are online? Not a huge problem, but why not. I'm tired of fixing stuff when I reboot. Or else, is something to not configured right and the cause? Hmm.

  What do you say?

  Try to connect the external disk after reboot completed if he could climb.

• My computer crashed and after reboot, I lost all my saved passwords. How can I recover it?

  I was looking on a saved password when suddenly my computer crashed and restarted. After reboot I couldn't see the saved passwords.
  As a test, I saved a password and this password is displayed in the list of saved passwords, but all the others are still missing.
  How can I retrieve my saved passwords?

  Thank you!

  If the file has no valid data then you may not use this file.

  You can try if there is an earlier copy of the logins.json file.

  • Right click: properties > Previous Versions
  • http://Windows.Microsoft.com/en-us/Windows7/previous-versions-of-files-frequently-asked-questions