Restore IOS 10 - bricks and very slow

Similar Questions

• Satellite T110-11U: WLan connection dropped and very slow performance

  Hi people,

  I use a Satellite T110-11U running windows 7 Home premium.

  After having initially was very satisfied with its use, it now becomes more and more frustrating to use with wifi, with connections dropped and very slow performance.

  I have updated the BIOS and think I have updated all drivers wirelss, but could be the problem. It seems that wireless, software of management is at fault because the networks are detected, but not clinging.

  Any suggestion or tips to try will help save my sanity!

  Thanks for your help.

  John

  > have updated the BIOS and think I have updated all drivers wirelss, but could be the problem.
  If you need to make sure that you use the latest WLan driver.
  The driver can be downloaded here:
  http://APS2.toshiba-tro.de/WLAN/

  The laptop uses the Realtek RTL8191SE of WLan card.
  Please also reset the settings of the Wlan router. I had a lot of problems with my WLan and after the reset of the router, performance problems disappeared.

• Cannot scroll to delete several email messages-just one at a time and very slow-help?

  MacBook

  10.10.5 Yosemite

  Can not hold the command to scroll down and delete send several messages, just one at a time and VERY slow-help?

  If the emails are side by side, select one, then hold down the SHIFT key and select the last one. Hold the command key and clicking on the individual emails should work. What happens when you try?

• my computer does not work properly and very slow

  Dear Sir.

  my pc does not work properly and very slow

  Can you help me

  Velmurugangr

  Here are some tips to help you speed up your system and Foundation repair.

  1. http://support.microsoft.com/kb/310312 cleaning disc

  2 Disk Defragmenter http://support.microsoft.com/kb/314848

  3. how to uninstall the unwanted/unused programs http://support.microsoft.com/kb/307895

  4. How will I know if I have a http://windows.microsoft.com/en-US/windows7/how-can-i-tell-if-my-computer-has-a-virus virus

  5 tools to remove the virus Security Essentials

  6. how to run check disk http://support.microsoft.com/kb/315265

  Your question is a little vague, suggestions above should give you a good start to decide the issues you face. Let me know it it helps. Thank you.

• Lightroom showing constantly "unresponsive" and very slow since the last update. With the help of Windows 10. Extremely slow import!

  Lightroom showing constantly "unresponsive" and very slow since the last update. With the help of Windows 10. Extremely slow import!

  Hi Dear

  Please see this thread windows Lightroom CC 10 'unresponsive' number.

  Let us know if this helps

  ~ Assani

• Given that downloading Firefox, my mouse is sticky and MSN games are hard to play and very slow to download. Any suggestions?

  I checked the system, apparently the mouse works fine. The games are very slow to download, and it is almost impossible to play because the mouse is so slow.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/

• Re: Wifi works fine on an AC/DC power supply. And very slow on battery

  Dear friends!

  When I use my laptop on AC/DC adapter, wifi works perfectly. Fast and without any problems.
  But after that I use it on battery, wifi works very slowly. I wait about a minute or two to open any site.
  Yes, it works, but very very slow. When I connect the card once again, immediately without any problems!
  The same site opens in seconds!
  What do you think of this problem?

  Thank you very much

  I could solve the similar problem on my laptop by changing settings in the WLan card properties.

  Go to _device-> advanced-> properties-> tab_ Wlan card Manager

  Here I put the on OFF power saving mode (turn off).

  This option controls the power resources if the laptop is running on battery
  So disable it and see if you can notice some improvements.

  Concerning

• TCP between PC and very slow LM3S8962

  Hello

  IM using a TCP connection between my PC and the LM3S8962. Ive been doing some tests and the connection is VERY slow - only transmitting every 200ms or so--even with the simplest examples two examples TCP incorporated and not incorporated. This could be due to the algorithm of Nagel? Ive tried using the TCP-NODELAY package while getting connection errors every time I try to put in place.

  Any help would be appreciated,

  Brad

  I discovered that including a 'warning error' vi and ignorant error 56 solved the problems of speed using normal TCP. STM this inherently includes in their functions and so is the reason why the STM was so much faster.

• We have a printer All - in 6110 and very slow to print. a page in 30 min. new ink cartridge.

  We have the all in one 6110 and now its very slow print new ink cartridge and the downloaded drivers but it shows only a page in 20 to 30 min. is not a difference in color or black and white.

  Help, please.

  This is caused by the failure of one of your cartridges.  I don't know if supports Officejet 6110 print reserve mode, but try the following: remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

• Photoshop and indesign CS6 freeze and very slow.

  My two indesign and photoshop are extremely slow. Freeze all the time and are very slow.

  It takes forever to open the software. InDesign crashes too often. Both have been updated recently but still very slow. How can I solve this problem?

  Hi louiselee,

  Please see the following article for Photoshop CS6: How to tune Photoshop CS6 for optimal performance

  You also check: 14 tips Tweaks & speed Up Photoshop CS6 Performance

  Let me know if it helps.

  Kind regards

  Tanuj

• To access the Oracle Postgres using DG4ODBC and very slow psqlodbc

  I've set up DG4ODBC a base of Oracle 11 g Windows 2003 32-bit to access a Windows 2008 64 bit 9.1 database Postgres, you use the psqlodbc (32-bit) driver.
  
  I can't do it because of the queries, but they are very slow. The reason is that the place where clause of the query is deleted somewhere along the line (I've seen actual queries run by Postgres using pgAdmin server status screen) and all the rows of the table are extracted from Postgres. Naturally with tables bigger than the few lines which means do a full table in Postgres scan, so that transfer a lot of bytes through the network.
  
  "For example, if I mark from Oracle like this: select * of" dps_user"@pg where 'id' = '2423', run the sql in Postgres is: select * from dps_user, which retrieves all the rows of the table! When I get the result of the query in Oracle, I get only the row with id 2423, so I guess that Oracle Gets the entire table and that he not filtering at its end.
  
  In a separate 32-bit Windows XP machine I have implemented the same psqlodbc driver, and ran the same query by using Microsoft Query. In this case, the query to run in Postgres contains a where clause and, therefore, it is much faster because a unique index scan is performed in Postgres, and that a line is transferred to Microsoft Query.
  
  Could you help me, please?
  
  Thank you very much
  
  Carlos

  Hi Carlos,
  Yes - he manipulated me the SR ;-)
  Sometimes they have a little more time and information to study can throw up the answer.

  Kind regards
  Mike

• CS6 departure signs and very slow application

  When I start InDesign, "from panels' part of the boot process hangs for a while. After about 2-3 minutes, the app will be charge. However, when I'm in charge, passage of one pallet to another (for example, pages to layers) - literally - takes 30 seconds. During the major part I the rotation beach ball. Has anyone else seen elsewhere?

  I trashed my prefs: no love.

  Uninstalled and reinstalled InDesign: no love.

  OS: 10.8

  computer: iMac 27 "2.93 i7 with 16 GB of RAM

  Other applications of Adobe Illustrator and Photoshop are very good.

  Any help would be appreciated. Thank you.

  Do you have any software like Suitcase fusion font management or fonts Expolrer?

  Also, you can check in safe mode.

  In my view, that the issue could be a third-party plugin, which may be causing that.

• Disco and very slow

  Hi all
  My plu disco turns very slowly, its takes long time to open any book work or the spreadsheet. I'm on disco more 10.1.2 and the version of java is 1.6.0_07, can any advice me please what continues?
  
  Thank you

  Hello
  There is a problem 10.1.2.2 get to work with version 6 of the JRE,
  they do not match and cause performance problems.

  There are two things you can do:
  1. the java version downgrade - in my experience the best JRE was the 1.4.2_6
  best way to do is to remove all versions of java and refresh install the 1.4.2_6 version.
  Remember to disable the auto update after installation.
  2. turn to level the discoverer of the 10.1.2.3

  Tamir

• How can I fix slow loading emails and very slow delete email on my macbook pro 2009?

  the emails are long to load on my macbook pro 2009 and when I click on delete it takes about 10 to 15 seconds for it to delete. no problem on my imac occurs. both machines run the mavericks. What is the reference for this?

  See Daps

  • https://wiki.Mozilla.org/Thunderbird: test: Antivirus_Related_Performance_Issues #McAfee

• Vista Home Basic tracks and very slow download

  I ran the direct cleaner safety and MSE. Also, Spybot. I have all the latest updates. I turned off all programs that are running. I went through the test of "fix." No anomaly. Therefore always to turn off or restart. Every now and then when stop I get an message explorer.exe still works. Or while it is on that Internet Explore does not. Help, please

  Hey Sandie.

  To solve the problem, I have listed a few suggestions below. Go through them and see where it leads.

  Question stop or restart:

  Equip your boot configuration system, and then restart the computer. If the problem does not occur in this State, it indicates that one of the services that are running in the background you keep awake. A clean boot configuration, the usual startup programs do not start, and non-Microsoft services are not started. For detailed knowledge, see this article.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Problem Internet Explore (IE):

  Take a look at the article below which has various suggestions to crash IE problem.

  Internet Explorer does not start or stops responding
  http://support.Microsoft.com/kb/926449

  In addition, various suggestions for improving the overall performance of Vista can be found here:

  Ways to improve your computer's performance
  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance

  Optimize Windows Vista for better performance
  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

  Note: Ensure that you switch your computer to normal startup mode after completing the troubleshooting steps. Steps are available in the article above.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.