restore the missing recovery program in d drive in windows 7

Similar Questions

• How to restore the missing dll? -lack of plnradt.dll

  I get a message c:users\ (name) \app dataI Miss c:\users\ (name) \app data\local\plnradt.dll.  How to restore the missing dll.

  You could have, or still are, infected by malware; and it could also be a starting top left him entry.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform full scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configureAutoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• My hard drive has been replaced. I want to restore a backup made on an external drive, using Windows backup software.

  I get to the step "to install the management of removable storage on Windows Server 2008

  1. Click Control Panel and then click on Administrative Tools.
  2. Open Server Manager, navigate to the features summary section and click add features.

  It is the section on the recovery of an old version of Windows.  My situation is all on Windows Vista.  Maybe I shouldn't use these intstructions.

  When I get to this step I can't find Server Manager.  I opened everthing under admin tools, and there is nothing that looks like this.

  If I go to this issue the wrong way, what should I do next?  The system has recognized my hard drive on Windows Explorer, but when I said retrieve the backup, it says that there is no backup file.

  Hi poudrc,

   
  I suggest you to follow the steps in the link and check if it helps.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup
   
   
  You can also check out the link below.
  Back up and restore: frequently asked questions
  

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

   

   
  I hope this helps.

• where to get the hp laserjet 6l pro printer driver for windows 7 32 bit

  where to get the hp laserjet 6l pro printer driver for windows 7 32 bit.

  or if not is there a generic driver that will work for hp laserjet 6l pro printer in a 32-bit windows system 7.

  My Windows 7 Professional 64-bit system has a built-in driver (provided by Microsoft) for HP LaserJet 6 L printer; I guess that the 32-bit edition may also provide a driver.

  Note that the driver can only appeared after the list of drivers in the Add Printer dialog has been updated by clicking the Windows Update button in this dialogue and in the meantime (maybe several minutes) for drivers to download and list to be filled again.

• How to restore the system recovery files to their original location? (HP Pavilion p6540F desktop computer)

  I have a desktop HP Pavilion P6540F under Windows 7 Home Premium. A few days ago there was a problem with windows that virtually wiped out my OS and I had to restore my computer to factory settings. Before restoring my computer I backed up all my files on a disk. After Reinstalling windows, I placed the drive with all my files recovery on it in my computer and running the recovery .exe file that has started downloading my files. All of this worked perfectly well but the problem is that these files only stored in a file on my desktop and has not been restored to its original location. Is it possible to get these files to restore to the correct locations on my computer without having to manually, drag the files to their old location? Honestly, I don't know where many of these files were located before the restoration and many items such as preferences for certain programs are impossible for me to move. Thanks for the help.

  The backup that is used to recover only restores the files in a folder, leaving the owner to move. I agree, not the application of backup more useful, but better than nothing I guess.

• Satellite L50 - A - 1 6: restore the preinstalled recovery Partition

  Hi all.

  I changed the partition of my HARD drive, now the preistalled Partion Recovery is no longer available.
  I understand that in this way, that the partition table has been altered and if the recovery Partition is not found to restore the factory settings or create a recovery disk.

  However, the recovery partition is still on the HARD drive and its contents seems to be correct.

  Is there a way to make the partition available recovery yet?
  (For the moment, I can use the Lalonde by starting a 'live cd')

  Thanks in advance.

  > Is there a way to make the partition available recovery yet?
  If I understand the recovery partition is still available, but the problem is that the installation of recovery tool can't find it more. Recovery partition is visible only in the event that this laptop has the factory settings and initially defined partition structure.

  Unfortunately now you can start recovery image installation.
  Did you create a recovery media according to the instructions described in the user s manuals document?

• Restore the backup to an external hard drive

  original title: if I reinstall my Vista, how to make the backup on an external hard drive? Is it a procedure drag-and - déposer? I use a Seagate external hard drive and there is no help section.

  Have run the back up to the external hard drive, I would like to know how to use it when I reinstall Vista Home Premium system.

  Also, I tried to check the hard disk for errors, and he has not finished the event.

  Assuming that you used the backup of Vista and made program a full backup and not an image backup (although some of these procedures include the restoration of a full image backup), here is some information to help you restore data.  Try to read or at least most of the analytical documents before you start, so you get a good understanding of the process and the procedures involved.  Restoring from an external hard drive is a little different from restoring a secondary internal hard drive, CD/DVD or Flash drive or on the network (although quite close to the procedure of network). If you have used the Vista backup program, you can not restore using drag-and-drop - you must use Vista restore program.

  Here is an article on the restore procedure:http://www.vista4beginners.com/How-to-restore-files to make sure you do this right.  It's a selective restore of a full or selective backup (not a full restore from a full backup) - but since you did a full backup, it matches your process more closely than would a full restore.

  This is a GREAT article on the backup and restore processes in Vista http://technet.microsoft.com/en-us/magazine/2007.09.backup.aspx , but he won't go into detail about the restoration process - considering almost as easy, of course.  But it teaches you a lot about what is possible and how to do it.  It also focuses primarily on the full backup process, but he did mention the full backup and restore process as well.

  Here is an article on the advanced use of restoration (during normal restore does not work):http://www.mayankraichura.com/post/2009/08/06/Avdvanced-Restore-via-Windows-Vista-Backup-and-Restore-Center.aspx.

  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  I also found the following (but don't know if it of true or not):

  1. after the start of "backup and Restore Center."

  2. I chose "Advanced Restore"

  3. I was did not an administrator password... maybe because my account is an administrator account.

  4 choose "files from a backup made on a different computer.

  5. in the dialog box indicating "Select the location of the backup to restore", select "hard drive, CD or DVD...". »

  6. under the drop-down list box, select your drive/partition and continue

  7. If all the backups on your drive, it will show a list of them.

  8. in my case, he showed a backup, but in the backup location, it will show "backup location is not available."

  9. I was frustrated, but then I somehow just select this backup (Yes... even if he said that thebackup location is not available " ")

  10. and you press "next".

  11 guess what... no error!

  12. a window appeared asking me if I wanted to do a full restore, or I want to select specific folders or files.

  13. I selected the folders I wanted to restore and bingo... it their restored smoothly.

  14. so that the next time see a mistake, try to continue with him... ;)

  I don't know if this will help, but it does not provide much information about the process (when it works and even when it does not).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to back up and restore the system and program files to install new OS

  Hey all,.

  I recently bought a new Toshiba 1 TB HARD drive. My old WD 1 TB HARD drive was giving me the end. occasionally, I get the BSOD. In addition, on occasion, when I restart the computer it automatically runs chkdsk program and reported several bad clusters. However the chkdsk program never seems to report the bad clusters, so periodically, when I restart, it runs and bring back them again.

  I would like to the image or to back up all the files on my HARD drive problem, then do a fresh install of Win 7 Ultimate 64 bit (my current operating system) to the new HARD disk, and then restore the clone or image system and program files on the new HARD drive. I don't want to go through the process of reinstall all again, when everything seems to work very well. Given that the image of Win 7 program makes and accurate picture of the HARD drive, then use this program would cause the new installation of Win 7 Ultimate 64 bit to be replaced by the restoration of the image. Therefore, if there should be corrupted data under a bad cluster of old HARD drive, that data would not be transferred and my existing problem would be transferred to the new HARD drive.

  On the other hand, if I do a clone of disc, I'm not sure that existing programs would continue to operate on the new HARD drive and would require a new install of each program based on the new installation of the operating system Win 7! I would have then lost my time to make a transfer of program/data files to my newly formatted and freshly installed OS.

  Anyone know of any program (Acronis True Image, Paragon, Norton Ghost, Macrium Reflect, etc) that will allow you to image or clone the program and data (including the operational needs of the files such as: Win32 system files, files of activation, etc.) so that they will work properly on the new installation of the operating system?

  Any help would be greatly appreciated. Have a great day.

  Ed Wood

  "Questionable" disk formatting can hide bad sectors or replaces the original format.  It is not known if / when bad sectors could / will reappear.

  If you have a player that you suspect problems, find advanced manufacturer of the car diagnostic tools.  Go to WD wdc.com website and get their diagnostic tools Data LifeGuard, to 'really' to test your drive.

• Computer laptop Windows 7 can see other wired PC via a wireless connection by specifying the box "search programs and files" drive letter in the start menu, but not in the network screen

  My laptop with Windows 7 (64-bit) can not see the other desktop PC running Windows XP via a wireless connection, except if it is plugged into my laptop so only I can see them on the network.
  I checked all the working groups to ensure that all are the same.

  However, when my laptop into Wi - Fi, I could see the other wired desktop PC by specifying the network path in "search programs and files" to the start menu in the Windows 7 laptop, I was able to add network folder by specifying the drive letter for the connection and file I want to connect via a right click on the network to connect a network drive...

  Then, finally I can access any other desktop pc wired to shared folder via the Wi - Fi by this method.

  But I still don't see them on eventhrough network I can access by this method. Please help me solve this problem.

  Hi Hkway,

  • You are able to see the Windows 7 machine Windows XP computer when connected through wireless and if it is accessible through network?

  First of all, check if the NetBIOS protocol is installed on your Windows XP computer. To install the NetBIOS Protocol, follow these steps:

  1. click on start, click on Control Panel and then double-click network connections.

  2. right click on the card that you want to add NetBEUI to and then click Properties.

  3. on the general tab, click on install.

  4. click on Protocol and then click Add.

  5. Click to select NetBIOS protocol in the list, and then click OK.

  6. restart your computer.

  Also make sure that NetBIOS over TCP/IP is enabled in the Windows XP computer. To do this, follow these steps.

  Turn on NetBIOS over TCP/IP

  1. click onStart, click on Control Paneland then click on network connections and Internet.

  2. click onnetwork connections.

  3. right click onLocal area connectionand then click Properties.

  4. click onInternet Protocol (TCP/IP)and then click Properties.

  5. click on the tabgeneral and then click Advanced.

  6. click on theWINS tab.

  7. underNetBIOS setting, click Enable NetBIOS over TCP/IP, and then clickOK twice.

  8. click onclose to close the local area network connection properties dialog box.

  9. close the network connections window.

   

  After following the above steps, check if you can access the computer Windows XP of Windows 7 computer using the wireless connection.

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• the Acer recovery management does not not in windows 8.1

  I just got an acer aspire e15're-551-t1mk, which seems to work ok but the only problem I have is that I can't make the recovery disks, as soon as I open acer Windows Recovery Management, I get a pop up that says allow or not, I click Yes for allow and mouse will tour a few times and then nothing the one idea I sent to acer and there answered "because I brought the laptop from pc world then take with them", thanks acer

  If I restart the laptop and press SHIFT or alt f10 cell phone asking if I want to restore the sofeware etc so that restoring little seams to work and also nothing has been installed but as I thought I would be makes records first

  help help help ran out of ideas

  OK, good to hear.

• How to restore the XP boot loader and get rid of Windows 7 a

  Windows Boot Manager

  I converted my computer simple boot with Win XP to a system dual boot installing another HDD with Windows 7 Pro. and it has also installed Windows Boot Manager. Now, I want to go back to a system boot and removed the second hard drive with Windows 7 but am unable to get rid of the boot manager who always appears at boot. Any suggestions?

  Hi George,.

  You may need to boot into the recovery console and fix the Master Boot Record (MBR).

  Step 1: To boot into the recovery console, refer to this article.

  Description of the Windows XP Recovery Console for advanced users

  Step 2: Run Fixmbr and Fixboot from the recovery console commands.

  Microsoft Windows XP - Fixmbr

  Microsoft Windows XP - Fixboot

• I don't see the photos on my external hard drive with windows Vista Home Basic

  Hello

  I bought an external hard drive Sansung to save all my music, but when one copy all my external music files hard drive thumbnails disappears. I uncheck the "always show icons, never thumbnails" in folder options, I tried large icons on display options, I even checked "display thumbnails instead of icons" on the Visual effects tab in the Panel of the Performance in Advanced system settings. ' " Prevented, Windows Vista is not able to see the photos in my external hard drive.
  What should I do?...
  Looking forward to your audience you shortly.
  Thanks in advance,
  Charlie

  1. click Start allprograms,Accessories, System Tools folder and Disk Cleanup
  
  2 check the photos and click OK.
  NOTE: Cache view the size of your thumbnail. More browsing, it can make.

  3 click delete files button on the confirmation window.

  4 disk cleanup will now clear thumbnail cache and close.

  This should clear up your tiles and once you access the program again the cache database will be recreated with the right thumb nail (we hope).
  "copyed from another response to a thread similar to yours from"martin-support engineer.

• Cannot restore the system and can not get online with Windows Vista

  Original title: bought a hp with vista system has never worked right

  This system came without a disc I way to restore the system never worked, restore now int exp problems was trying to correct but are unable to online this vista system has no access to anything else. I would like to get a look of MS and correction online, but my system will not let me access MS

  Check with your computer manufacturer on how to restore your system correctly and if there is a problem, the manufacturer should be able to help.

  Maybe this will help: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00810334

• The iexplore.exe program ceased to interact with Windows and was closed

  The version of iexplore.exe 9.0.8112.16447 program ceased to interact with Windows and was closed

  This happens from time to time only.

  Hello

  Follow these methods.

  Method 1: I suggest that scan you Chccker file system (CFS) on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/929833

  Method 2:  If Internet Explorer does not work, you can try to disable Internet Explorer and then enable the feature that is as good as the uninstall and put it back.

  Follow the steps below to do the same.

  To enable or disable the Internet Explorer, follow these steps:

  a. click the Start button, select Control Panel, click programsand then click Windows turn on or off features. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. uncheck Internet Explorer. Click OK and restart the computer.

  c. now follow the same steps to activate Internet Explorer by selecting the checkbox.

  Access the link for more information on the above steps to turn off or on the features of Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

• Try to remove scanner driver Uniblue and receive the message 'C:\Program files\ Uniblue\driver scanner\ unins000.msg' is missing

  Could not find a way to correct the problem. Need help.

  I finally got Uniblue Driver Scanner "Removed" from my computer. Resettlement is to uninstall the old version & replaced with a programme of work.

  I was then able to "Withdraw" this version of the computer

  Thank you for your time & response (s)