Restore to factory setting problem

Similar Questions

• I want to restore the factory setting. I press F8 and their credentials for 'user '.

  Original title: I tried to restore my computer and it shows the other user. What should I do?

  I have a windows vista Dell and I want to restore the factory setting. I press f8 when the computer starts and then I choose the repair option. After that, it shows a written page another user with two spaces a username and another for the password. I tried to write my username and leave the password blank, but it does not work. I want to know if there is another way to restore or if should I do something?

  Hello

  This is Dells use of their recovery partition information

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  For more information, contact Dell

  http://support.Dell.com/

  or try the dell support forums

  http://en.community.Dell.com/support-forums/default.aspx

• A720 cannot restore to factory setting

  I can't restore my A720 back to factory setting. The error indicates the partition has changed.

  What I did that he messed up:

  1. I have partitioned the C drive into 2 partitions so that I can install Windows 8 on one of them.

  2. everything went well. So I decided to remove WIndows 8.

  3. I deleted the partition Windows 8 and he added to the C partition.

  4. I had trouble getting my calibrated colors (this problem was present from the first time that I turned on the system. No the above procedure).

  5. I chose the OneKey restore announcement that it restarts.

  6. when I hit the F2 key, it has a display to dual boot, but only of Windows 7 has been in the list.

  7. I had already made a series of Recovery DVD, so I inserted the DVD #1 and restarted.

  8. I press a key when prompted and restore screen came.

  9. I hit him food and and it appeared to work until the error dialog window appears saying that the size of the partition was incorrect.

  Help! Thanks in advance.

  Bloo,

  I finally got the correct disks. I was sent a total of 5 sets of CD. All were for the A700 except the last game.

  I had pretty well given the fact that I was going to send the unit to the factory to restore. They actually sent me a box to ship it in. Fortunately, before I packed it upward, I got quite unexpected package. Voila! It was the right set of discs and now my system runs like a champ.

  Thanks for your help on this Bloo.

  Frank Olivio

• Dell inspiron E1505 with Windows Vista system restore to factory setting led by mistake. The operating system version is incompatible with Startup Repair tool

  I tried to restore my Dell Inspiron E1505 laptop to the factory setting.  I pressed F8 then selected repair and then Dell Factory Image Restore.  Used to format hard drive.  He formatted the hard drive and then he restored the system.  Suddenly, a small window pops up without any details, but saying "error".  I restarted the laptop, it entered into Startup Repair mode.  But even once showed error "operating system version is incompatible with startup repair".  I don't have my windows CD/DVD.  Although the windows sticker is still on the laptop.  Please advise me how to install the system on the laptop so I can use the same.  Please note that I am in Gurgaon (India).

  Thank you

  Hello

  Because the computer is located in a no start situation and you don't have the installation disc, it is best to contact the manufacturer for assistance.

• Vista restore to factory setting

  I keep trying to restore my computer laptop girls to the factory setting, but when it gets to half way through it I got an error message.  After that, I can go no further.  What is going on?

  I keep trying to restore my computer laptop girls to the factory setting, but when it gets to half way through it I got an error message.  After that, I can go no further.  What is going on?

  Hi Eddie

  You must contact the manufacturer of this system for more information on the restoration of this computer.

  Different manufacturers use different restore procedures.

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• After restoring to factory setting... ntoskrnl.exe is missing or damaged

  I have a problem with my Asus R500VD laptop.

  My phone was at a standstill after I opened a few applications and after waiting for a while, I decided to shut it down by holding the power button for a few seconds. After that, I got a BSOD error 0xc0000221 saying ntoskrnl.exe is missing or damaged. I tried to go back to a previous system restore point, tried chkdsk /r (no error based), tried bootrec with all options (it shows 0 found windows installations), tried a full restore to factory (using the on my laptop's recovery partition), but nothing has worked. I always get the error above.

  When I restart, it tries to automatically repair the system (that works, it cannot solve problems automatically) and at some point it changes recent cancellations (complete the recovery I think). I tried the different boot options, but nothing seems to work.

  Does anyone have an idea how to solve this problem? It doesn't seem to be any corruption in the filesystem (chkdsk), ntoskrnl.exe is not missing...

  Thanks for your help! Greaty I appreciate it! Tips are welcome!

  Rob

  Hi Blueelvis,

  No, unfortunately I don't have a spare HARD drive. But... I sent it back to the shop where I bought it. Should still be under warranty. I have included all our correspondence to give them an overview of what has been tried. Thanks for your help! I hope that I get a replacement or they're going to fix it. I also ran memtest86 + using The Ultimate Boot Disk and he found loads of errors--not sure whether memory is as bad or if it has something to do with the 8 GB with 64-bit processor.

  Best,

  Rob

• TouchSmart AllOne KT457AA: Restore to factory setting

  How to restore the HP TouchSmart AllOne (Vista) to factory settings?

  Hi there @joan10,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have doubts to restore your computer. I'll be happy to help you.

  Here is a document to help.

  Perform a recovery of the system (Windows Vista) HP

  Recover the system after the hard drive is replaced (Windows Vista)

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Solved: HP Split X 2 - unable to restore to factory setting

  Hi all!

  I am facing same problem with my hp split.

  What did you do in the BIOS? Please post your solution.

  Kind regards!

  Vinicius Andrade

  ViniciusAndrade wrote:

  Hi Paul!

  Thanks for your advice.

  I tried everything, but still I can't recovery my machine. Same error persists.

  Is there a possibility of error in my recovery image?  I created the recovery image it there a long time, in a USB key.

  Recovery process starts correctly but, during the process of instalation (not to the reproduction of data or formatting hd), an error occurs, machine is restarted, and initializes it with the message "Restore incomplete".

  Currently, I can see a log file and save a log of datailed in the USB. I don't understand what this newspaper talking about the error of the instalation.

  I have already run all the diagnostic tools, all my hardware is ok and passed all tests.

  Follow the journal:

  

  Before you start a new attempt at a recovery, try the following: (remember to go back and change it later)

  Press the power button and then press the ESC key. Select (press on) press F10 to enter the BIOS. Change the date system on January 20 of the year where you bought your X 2. Once this has been done, go ahead and press F10 again and choose Exit, save the changes.

  Now, try the recovery again.

  I highly recommend that you meet the PM can you receive HP team.

• Restored to factory settings problems

  I restored my laptop from vista Home premium to factory settings, after he got a virus, and now I can't connect to my wireless network. When I try to connect it says connection failed and limited activity. diagnose and repair does not work either. It is not the router because the other computers in my house can get on the internet. Help, please!

  You used the recovery process of HP computer to factory settings.

  You downloaded the drivers we are not safe are the right ones to finish the reinstall.

  You would be better to contact HP for the good advice on this topic:

  Contact HP direct: http://welcome.hp.com/country/us/en/contact_us.html

  See you soon.

  Mick Murphy - Microsoft partner

• I get an error message when you try to re - install Creative Suite on a laptop that I had to restore the factory setting on. Message reads as follows: Installer initialization failed. This could be due to a missing file.

  Above the error message keeps appearing - please help!

  Please confirm if you try to install the creative cloud or earlier versions like CS3, cs4 etc.

  You can check the following links for the error message you received

  Error: "cannot install initialize | Windows

  Troubleshoot installation of Adobe Creative Suite with log files

  Creative cloud Installer fails to boot into OSX Mavericks

• F8 to restore it to the factory setting?

  I have a dell studio laptop with windows 7 and vista.

  I've used F8 it restore to factory setting.  But now F8 only will allow me to restore a previous backup.  What can I do to return to the original settings?

  Hello

  For Vista, F8 is the mothod of Dell to get Vista back to factory settings.

  Here is the information from Dell on how to do it.

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_336966&isLegacy=true

  You dual-boot, so you could destroy the Dell recovery Partition.

  If you have, call Dell for recovery disks.

  See you soon.

• Deletion of dd - wrt firmware and restore to factory State

  Hi, I have a Nighthawk R8000 I bought with DD - Wrt firmware. I would like to remove this firmware and restore a factory setting. I could have messed up things. I chose the option to restore to the factory, he downloaded some firmware and restarted. Now, I can not access the router at all. It is attached to a Cable Modem provided by my ISP and I found it with an IP address, but when I try to access it without success.

  Any suggestions?

  Thank you my friend, that has worked.

  Herbert

• Cannot restore the factory settings on Pavilion dm3

  After the use of the laptop for about two years now and accumulated quite a waste, I tried to do a restore to factory setting.  When I bought it, I also bought two recovery system DVD - never used or tried before.

  Fact by following the instructions; Insert the first disc (later tried both without success) in the external optical drive, which recognized the drive but do nothing outside to show me the content.  It there is no setup.exe and the disc is no not no matter what autorun.

  The computer works fine, just a bit slow, especially when you turn it on, so I don't want to plant it, but I don't want to clean it up.

  Would appreciate any advice,

  Thank you

  Paul_Tikkanen wrote:

  Hello:

  You do not have the Windows Recovery discs.

  You must boot from the first floppy and follow the instructions on the screen.

  The best way to do that is to insert disk 1 into the DVD drive, reboot the laptop.

  At the beginning of the HP welcome screen, press the F9 key to start the start time menu.

  Select the DVD drive, and then press the Enter key.

  The PC should then attempt to boot from the DVD.  A message may appear on the screen that says basically «try to boot from DVD...» Press any key to boot from the DVD... »

  Press a button and the PC should then read the DVD, and you can follow the instructions on the screen.

  After the PC is done with disc 1, it will be ejected and invites you to remove disk 1 and insert disk 2.

  Based on the key F9 does not launch the only time where Start menu, and then press the ESC key and then select the options menu start.

  THANKS A MILLION!  Worked perfectly and absolutely right.  I didn't know the F9 option.

• My touch screen has a problem after downloading the IOS 9.0.2. Already try apple advises the steps. But the problem still occur. Already done restart of strength. Factory setting Reset also possible. But still the same problem. Can only be used at one min

  Hello!!!

  IM Apple Fan.

  Purchased IM Ipad2, Ipad4, Iphone6

  Last month I already buy s Iphone6 +.

  Today I feel unhappy

  MY IPHONE 6 'history '.

  My touch screen has a problem after downloading the IOS 9.0.2.

  Already called and try apple advises the steps. But the problem still occur.

  Already done restart of strength. Factory setting Reset also possible. But still the same problem.

  Only can be used for a minute. After that... The problem comes in again & again & again...

  APPLE.COM

  Can U help me

  Only products of Apple of love before updating the version 9.0.2

  iOS 9.0.2 happened some time. The last iOS is iOS 9.2. If you have not updated, updated. If you restored to the factory, it must have downloaded iOS 9.2. Also, if you restore to the factory and the problem is still there, then you must make an appointment at the Genius Bar to the nearest Apple store or Apple authorized service provider or call the Apple Support to have the device examined by Apple. There seems to be something wrong with the screen.

• The difficulty to restore my laptop to factory setting.

  I came home one day to find that there was a virus on my HP Pavilion Dv7 - 4009tx Enterainment Notebook PC and since I had important things backed up on my external hard drive I have much better just to restore my laptop back to factory settings, I find the best way to get rid of problems like this. (they rarely anyway).

  So I turned off my phone and then launch it and press F11, the window with three boxes popped up, I already knew what to do but the ability to set my laptop to factory settings was not in the first box where it should be, thinking that I made a mistake I looked on the internet and it said : this is how you do it. Confused out of my mind as to where the option went I tried the three other options available in the "I need help immediately" box and however the laptop has restored back to factory settings, but not completely, programs and software initially provided with the laptop were no where.

  I tired the other method to restore using the Restore Manager, option restore my laptop to factory setting was there to my greatest joy and I clicked it expecting it to be restored, but rather after the restart he come to a window with the restoration of the system and repair the start and a few other options.

  I'm really lost to restore my laptop to its factory originally settings as I had done a few times before. Nobody knows what is happening or what I'm doing wrong. My laptop runs only two years soon which means that it is not that old to have this kind of weird problems and I really need my laptop to do my uni work, I need to fix as soon as I can.

  Hello

  Virus problem has probably corrupted the partition on the computer. In this case, you will be unable to perform a factory reset of the recovery partition.

  You will need to perform a recovery using the HP recovery discs. If you have not created any recovery media after the purchase, you can order online them or directly call the technical assistance for the embedded discs out to you. This operation brings the computer to factory again.

  Here is the link to order online:

  Order of the recovery disc for Windows 7, Vista or XP