Restoring function

Similar Questions

• My system restore function has a problem, error: AppName: rstrui.exe AppVer.5.1.2600.5512 ModName: c:\windows\system32\srrstr.dll

  original title: my system restore function has a problem

  my system restore function has a problem

  error signature

  AppName: rstrui.exe AppVer.5.1.2600.5512 ModName: c:\windows\system32\srrstr.dll
  ModVer.5.1.2600.5512 offset 00009836

  What can I do to recover my system restore feature?

  I was going to do an installation of hotfix os from the orignal disc but got waring the operating system installed is newer than the one on the disk (I have installed the latest service packs)

  Hello

  1 did you changes to the software to the computer?
  2. what happens when you try to use the system restore? You get the error message?

  You get this error message if you already have a newer version of the operating system and then if you try to install an older version on it.

  Method 1.
  Temporarily disable the security software installed on the computer and check if the problem persists.
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Method 2.
  Please check if you are facing the same question when working in safe mode.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows XP Advanced Startup Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to start in safe mode of Windows XP.
  e. when Windows starts, try using System Restore and verify.
   
  Hopt this helps.

• How to restore function to the F3 key in Microsoft Dynamics SL?

  The function key F3 is used to search for information... it just randomly stopped working. I can't find all the information on how to restore in the software. Help!

  Hello

  Check out these resources:

  Microsoft Dynamics - help and how-to (technical support options)
  http://www.Microsoft.com/en-us/Dynamics/default.aspx

  Microsoft Dynamics - community, Forums & Forum search
  http://community.dynamics.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• AppAssure Finialze restore function?

  Ive come from the shadow world protect and liked the possibility when you perform migrations to start a restore since the current recovery point but not to finalize the restoration until I was ready to cut overall, then when you're ready to I would take one final glimpse of live machine, which would be very low, then turn off and do the final restoration and finalize it allowing for minimum downtime.

  It is similar to the continuous restoration, but it's only good for Hyper-V or ESXi, we run Xen server and now Nutanix Acropolis.

  So back to my original question is there an ability to perform a restore of a machine offline full, one final glimpse of do live and restore and cut during the new machine with minimal downtime...

  for example I want to migrate a file server to an entirely new material.  Large amount of files = restore time and I don't want to take the server offline for this large amount of time required to restore, to offline for 10-15 minutes, he should make a final glimpse of the original machine and restore it.

  Kind regards

  Stephen...

  Unfortunately not.  I have raised this with PM in the past and they like the idea it opens options a little during the migration, for me it was during the restoration of a physical server and a server running the free ESXi license.

  What I understand, quite low on the list of requests for functionality and probably not in the initial versions of RR6.

  I would have thought it could have been quite explicit that he will too change the operations of the core, much easier than adding VirtualBox suppoer and just an update of the TCU, but I do not pay the invoice (only some of them) and in all honesty, there was much more high enough on the list which in just title which made low.

  Sorry, not the desired response.

  However, you can restore just the C drive and direct for other volumes recover if your servers are configured accordingly.

• I show is no longer a notice that allow me to block or approve remote content in individual e-mail messages. I would like to receive the restore function. How?

  This "menu" was automatically appear. He stopped to show. I want to restore it. (Also, why he stopped showing?) A thought, I recently changed my setting re. accept cookies. Now I wonder every time if I allow or refuse them. Would that have something to do with the menu remote content stopping...?)

  It looked like this:

  Edit Remote preferences
  allow remote content for xxx@xxx
  always allow remote content to xxx@xxx
  etc.

  The current version should display the following message with a remote content.

  "In order to protect your privacy, Thunderbird has blocked remote content in this message.
  There will also be an 'Options' button next to the message.
  Click on the 'Options' button to get a drop down menu.

  • "Display remote content in this message.
  • "Change the remote content options.."
  • "Allow remote content to the e-mail address.

  If Thunderbird still seems to be allowing remote content, check the settings:
  Tools > Options > privacy
  or
  Menu icon > Options > Options > privacy

  Under "Mail content.
  Do not select the checkbox "allow remote content in messages.
  She should not be selected by default.
  To check all the exceptions that you have already set up, click the 'Exceptions' just right

• How can I find downloaded emails that disappeared after the system restore function?

  I restored Ubuntu 14.10 at an earlier date, but the previously downloaded emails since my online account after the restored date disappeared. Where can I find them? Data is backed up on a weekly basis.

  I have no idea, I suggest you to ask what you actually do on a forum of Ubuntu Linux. My guess is that you have completely replaced the files with the 'old', so the data are missing. Long experience which is anything "System Restore" or "system reset" will lead to nothing other than high blood pressure, gnashing of teeth and the loss data.

  If you happen to find a latest version of your profile files, the information here should help. https://support.Mozilla.org/en-us/KB/Profiles-TB#w_where-is-my-profile-storedUbuntu

• I clicked "forget this site", I can cancel it by running the "System Restore" function to retrieve my story?

  I clicked "forget this site" and I am looking for a way to undo it. I have heard say there is no way to retrieve the history of a particular site, once it has been deleted, but surely, it leaves some kind of record in the system? I read an article that suggested running the "System Restore" feature which gives me the option to "restore my computer to an earlier time" before that some changes have been made. Would this work?

  Hello, windows system restore will not restore the file that contains the history of firefox unfortunately (it's called places.sqlite). you would need a backup of your firefox profile folder to retrieve such data.

  Please also update firefox - the version that you are currently using is outdated and affected by many security vulnerabilities.

  Update to the latest version of Firefox

• My system restore function seems to have stopped working

  Whenever I try to use my system restore feature, it does not. Was going to fine a month ago.

  Hi AnthonyBurtenshaw,

  ·         You receive an error message?

  ·         Did you do changes on the computer before the show?

  I suggest you to follow the steps in the Microsoft Knowledge Base article mentioned below and check.

   

  The system restore service does not work in Windows XP

  http://support.Microsoft.com/kb/841568

  Let us know if that helps.

• Restore function looks like it works but not recover.

  I tried restore several times and it seemed he was working but would never restore to a set point.  I even made a point and then tried to restore at this point without success.  The answer was "Impossible to restore.

  Some security programs prevent changes to their file and must be configured to allow the restoration of the system work.  For example, if your computer has Norton Antivirus or Norton Internet Security, you must disable Norton product Tamper Protection before you run the system restore. See the documentation of your security program. Boulder computer Maven
  Most Microsoft Valuable Professional

• How to restore function HDMI on Windows 7

  Stupidly, I disabled playback HDMI device in the audio control panel, because it does not switch back to the speakers of the laptop when I unplugged the HDMI cable and I wanted to listen to something on the laptop.  I thought wrongly that it will reappear when I restarted my laptop, but it did not.

  How to restore this feature now that it has been disabled?

  Thanks for any help you can give me.

  Hi Tania,.

  To solve the problem for you, follow the steps below on how to enable the playback devices:

  1. In your peripheral system tray, right click on the "speaker" icon.
  2. Select the playback device.
  3. Click inside the window of playback devices , on the Read tab , select Show disabled devices and Show disconnected devices.
  4. Find an HDMI output, right-click on it and select enable.

  Let us know how it goes

  Kind regards

  BIA of Hamilton

  You can use the mark as answer button, if this post responds to your request.

• My 'window of restoration' - function receizes window 0.0 by 0, 0mm.

  Just as the title suggests.

  If I open Microsoft Outlook 2010, I can't do anything, because the windows disappears immediately.

  But through the Windows Task Manager I can maximize the window. But, if I push the "restore window" - button, the window shrinks to 0.0 by 0, 0mm.

  How can I reset the size of the window?

  With the friendly reagerds.
  Mike

  When the window is reduced, but selected, can you hold down the ALT key while pressing the space bar to bring up a dialog box that includes "size"?  If so, when this dialogue window opens, key the 's' to select 'Size' then hold upwards or downwards arrow to stretch the window in that direction.  When finished, release the button and press 'Enter '.  Then repeat using the left arrow or right to stretch in the other direction.

  HTH,

  JW

• Rescue and recovery cannot find backups - EXCEPT in the restore function. Help

  I recently optimized files, including placement
  the disk - machine now flying.  "I wanted to start from scratch with R & R).  Thus,.
  delete all local backups and USB.

  I started a basic backup - initialized manually, close,
  restarted, returned the top could not backups - display Message "No. BACKUPS
  FOUND "hen"show all the backups", or"delete backups"Advanced"
  menu.  However I can find them using the RESTORE OF THE BACKUP.

  Repeated starting a new backup, same results exactly, except
  now I have two BASE backups.  I even started in the R & TV R
  environment may find things out there.  No luck - no possibility to launch a backup Boot TV
  environment, but could restore from the backup.

  I don't see any other choice other that uninstall 3.01?  Do you have?  However, the most recent
  version there is 4.22... Any reason why I shouldn't go to the
  new version?  I read all warning, installation notes, bugs, etc., none seem to apply to me.

  If anyone has any ideas, I would be happy, or if you know any
  reason why 4.22 isn't a good option...?

  Thanks in advance

  Type of computer rescue & Recovery version 3.01 T60 = 2623 - model.
  D7U

  All, I finally managed to replace the version of R R & on the Master Boot Record.

  First, I started with a R boot drive at & R.  You can either use one you did with R & R when (if) you put always a full backup on CD (which I do every year), or the startup disk (a, a) that Lenovo is sent to you with the 7 product Recovery CD, you can restore your PC to specifically state that you received from the factory or store (if you have purchased again).

  R & R starts automatically on startup with the version of R CD R & makes the startup disk (be it when you or Lenovo is the startup disk.)

  My experience is that after you start with this CD, I shut down R & R normally, then restarted the computer by using the MBR (pushing the Thinkvantage or F11 key at the beginning in the trunk) and voila - it starts with the same version that you started with the CD in the last step.

  I also discovered that if you use R & R to restore to a time when the Version of R & R was different from what is working on the MBR, which also change the MBR.  Again, both are good information that will certainly be useful trivia some time.

  Thanks again to all who jumped and provided information that ultimatelly led to the solution

  concerning

  Fred

• The system restore function is unable to do with the error "no restore points were created on the disk your computer system...." ».

  Original title: where is my last system restore?

  I am under W7 SP1 on an Acer Aspire 7720Z computer laptop and when I try to use the system restore get them all is a box saying "no restore points were created on your computer's system disk. To create a restore point open System Protection. "When I open the protection system and then configure the" C"drive, nothing happens!  I have not tried to use the restore of the system for at least 2 years, but when I lost Autoplay I thought that I would give it a go and the above is the result.  I must say that I solved the problem of AutoPlay (it's a program called VMWare has changed the registry) and after that I put the registry to what it should have been, then, everything is ok.  I would really appreciate someone tell me what is the problem... Thank you

  "Hi

  I hope that you realize that, if in the case of the system restore's restore points is deleted
  This is perhaps the reason why
  to enable the system restore
  You can follow this
  http://www.malwarehelp.org/how-to-disable-enable-system-restore-turn-System-Restore-on-or-off.html
  and for all troubleshooting in advance
  go through
  http://www.askvg.com/fix-system-restore-point-creation-configuration-disabled-by-group-policy-or-system-administrator/

• How can I restore function of the basic games.

  Program downloaded UniRegistryRestore, now my basic games will not play.  I use Windows Vista on a 64 bit system

  Hello

  also run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228#appliesTo

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• The restore bookmark function has failed. Bookmarks has not changed.

  I lost a group of bookmarks under the heading called HANDY and I used the restore function, but it did not work. I tried several days of backups, but none of them have changed bookmarks showing.

  Note that the current versions of Firefox to show the number of bookmarks in a JSON backup in name of: xxx in bookmarks-#-#-# _xxx.json, so you can see if there is a backup with several bookmarks (different number of numbers).

  Problems with bookmarks and history does not properly can be caused by a corrupted database places.sqlite file.

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)