Restoring Windows XP on Mini 110

I "inherited" a mini 110-1045DX, and he had installed ubuntu on the original XP. I have nothing against ubuntu, but

I need Windows XP. I did an installation of a new (unopened) Win XP Pro. Interestingly, I was not

same prompt for a product key and the installation went perfectly. Two problems:

(1) display is too "fat".  Not really a big deal.

(2) No ethernet adapter. This is a big deal.

(A) I am aware that HP no longers supports XP, but is there a place where I can download legitimately

a copy of XP for the min-110?

(B) if not, where can I download graphics and ethernet cards?

TIA

Tim

Favorite of these pages

Drivers here

Home page for this model

Note, if you have used an HP Recovery disc to restore XP, there product key pre loaded, there should be a second disc with the drivers and software, but it is preferable to obtain the latest driver available from the link I gave you.

Tags: Notebooks

Similar Questions

  • Error 1317 on mini 110-3530 can\ ' t create the office installation folder. No way.

    Windows of HP mini 110-3530nr 7

    layout Error 1317 when installing Office 2010. Apparently the path does not exist.

    Thank you

    Bill

    Hello

    This is due to access rights. Please check the answer from following link:

    http://answers.Microsoft.com/en-us/Office/Forum/Office_2007-office_install/error-1317setup-cannot-create-the-folder-during/9063e10c-22E1-4e7c-AB14-6e45a2b514e6

    Kind regards.

  • No Mini 110 wireless

    Had to re - install windows on my Mini 110-3098NR.

    I don't have any wireless now. I have no device detected wireless.

    I have no internet if I hard wiring in all wireless.

    system use for verizon vzacess Manager is installed as it has come to this topic, I re - install that, but I think im missing a driver for wifi.

    Help, please. If I need to install a driver also, is it just double-click the file after downloading or can I install it somewhere?

    Thanks adavance

    Hello:

    The verizon software is used to operate your high card mobile broadband. If you do not use the wide card mobile broadband (WWAN) then you don't need software. You can uninstall it if you want.

    However, you need the driver for your card top debit or it will show up as an unknown device. I don't know if Windows automatically installed this driver or you did.

    If please install the chipset driver and restart. This installs the motherboard drivers which may be better than those generic installed under W7.

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-84578-1&CC=US&DLC=en&LC=en&os=4062&Product=4352080&sw_lang=

    The hardware ID shows your laptop is the Atheros AR5B95 Wireless LAN 802.11 a/b/g/n controller.

    This should be the driver for him:

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-84559-1&CC=US&DLC=en&LC=en&os=4062&Product=4352080&sw_lang=

    Finally, the other device is your Realtek card reader driver.

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-84657-1&CC=US&DLC=en&LC=en&os=4062&Product=4352080&sw_lang=

    You also need to install the Intel Matrix storage driver:

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-89605-1&CC=US&DLC=en&LC=en&os=4062&Product=4352080&sw_lang=

    Paul

  • Need the latest version of the driver for Broadcom 802. 11b / g WLAN to upgrade XP to Windows 7 on my Compaq Mini 110

    Windows 7 Advisor says to download the latest driver for Broadcom 802. 11b / g WLAN before I can move from Winows XP.  My laptop is a Compaq Mini 110 c - 1100CA computer.

    Please get the latest version of the driver.

    Hello:

    It's the latest XP driver for the broadcom adapter.

    http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=3688870 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_101092_1%257CswEnvOID%253D1093%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  • Attack of Zaq 140813 need driver for keyboard numbers, HP Mini 110-3530NR, Windows 7,

    Attack of Zaq 140813 need driver for keyboard numbers, HP Mini 110-3530NR, Windows 7

    Dear Brigitte,
    Yesterday, I tried to connect my keyboard to my mini HP numbers, but it did not work.  I am sure that the problem is the driver, as I was able to connect to my HP laptop with Vista, without any problem.

    The keyboard is a keyboard of ten Note X TK01 USBM.  In the back are the words "Arvel TK01 = USBM Ten keyboard, S? N 990500424, made in China.

    You can locate a driver for me so I can install it on my HP Mini?
     
    Thank you

    Dear Brigitte, it was one of those anomalies that solve themselves.  After trying several times, I found the pad of numbers worked so I replugged it it after that I received the error message.  Second time around, it works fine.  JC

  • Windows XP on a HP Mini 110 3744TU

    Ive recently installed Windows XP Professional SP3 on my HP mini 110 3744TU. I got everything to work except the ITD "HD Audio CODEC", I get an error message (10), device could not start. I checked the forums and everything that I could find something called MS UAA SP3, but after installing I have still no sound, please help!

    I don't know what to tell you.

    Are there variations of the sound driver that you can try?

  • Error then re install windows XP sp 3 on HP mini 110

    HP Mini 110

    1/160 10.1 Intel Atom

    Windows XP sp3

    I tried to re install Windows Xp I received from HP.  I recently bought the computer from rent a Center.  There is no network driver.  I try to save up on PC to a time more early to see if there were drivers then.  I found myself with a password protected sign in which I had no idea what was the password.

    I called HP and they sent me 3 discs.  One with the operating system and the other two.  Application and Driver Recovery DVD and Application Recovery DVD, Microsoft Works 9.0.

    I deleted the partition the with the copy of windows and then reformat the drive.  I have re installed windows XP.  Once he was done, I went to change the floppy and install the applications.  The discs appear not on the PC.   I got a message there is nothing in the drive.  Also, he kept popping up messages that he detected new hardware, showed several types of different materials. None of the drivers could not be found and I would get the messaged that the device will not work properly.  I went to the Device Manager and deleted all conflicts.

    I tried to connect it to the internet in different ways with no luck.   I try to connect directly to the modem.  I also tried and wireless g USB.  Nothing did not work.

    I decided to try to repair the installation.  Maybe I had missed something and pulled out the drive too soon.

    I took R for repair and asked which copy I wanted to fix.  I didn't know what they were talking about.  I tried several different orders and asked the administrator password.  Nothing that I entered was correct.  After that 3 times I received a message that I was locked.

    I decided to go ahead and do a complete re install.  I rebooted and picked up all over again.  The installation has started and got 39 minutes left and an error message pops up saying:

    Setup could not register the OLE Control C:\Program Files\Common Files\System\Ole DB\msdaps.dll because of the following error.

    LoadLibrary returned the error 999 (3e7)

    Setup had problems to register the OLE control following DDL

    C:\Program Files\Fichiers communs\System\Ole DB\sqloledb.dll

    Contact your system administrator, who can help diagnose this problem.

    I rebooted the system and he goes back to trying to reinstall windows and continues to go to a certain point, and the message appears again.  I'm stuck and have no idea what to do next.

    Any help would be appreciated.

    Tamara

    You must start from the disc 1 again.

  • Pls help I'm totally stuck trying to reinstall windows 7 on my computer hp mini 110

    I have a hp mini 110-3538tu and he played in all directions upward and very slow, so I have a USB stick with Windows 7, which I am trying to install on windows 7 starter edition, but when I get to the part where I have to choose the driver to install, I can choose my USB but it says no device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK. I can't have happened here. A beautiful person out there can pls help.

    Hello:

    See if it works...

    I zipped and attached the controller driver SATA NM10 your laptop uses the label of attachments below...

    Unzip the file and copy the content without all the folders in your USB flash drive or flash drive, if you have two usb ports.

    With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

    After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

    You should now see the storage driver files listed (or access them if you put them on the same flash drive than your installation of W7 file).

    If you check the box, it only includes the compatible driver.

    Follow the prompts and hopefully, W7 should install.

  • HP Mini 110: upgrade for computer laptop windows xp

    Is it possible to upgrade a laptop of HP Mini 110 10 Windows or something else?

    JustinsGramms wrote:

    Is it possible to upgrade a laptop of HP Mini 110 10 Windows or something else?

    It is not available for XP, it's only for the 7, 8/8.1 for the upgrade. I don't think that the MS site will give the free update to XP machine, as those who are not supported by the Win10 upgrade.

  • HP Mini 110-3101TU: HP Mini 110-3101TU is not compatible with Windows 10?

    I've been running my HP Mini laptop in Windows 7, IE11 with an external (extended desktop) Samsung SyncMaster LS23A300BS/XP with no problems of navigation. All drivers up to date. I received a free upgrade for Windows 10 I installed online 2 weeks ago and have not been able to make a good navigation on the internet yet, either on board or IE11: both crash in browsers after a 2nd or 3rd browser, blocking and the opening page process may not be finished in Manager tasks so that Windows can not stop (you need to disconnect). I followed all the advice, corrections and common sense (clean boot) pertaining to this crash, but nothing works. On top of this crash, there is a problem with the application of Windows Explorer which can not read a statement in memory at shutdown of Windows 10 and must be closed in the first place. The last problem occurs only (I think) when working with the external montor, when I work with the laptop only I've not seen this message (can not read the instructions...) when stopped down, but blocks the navigation happens tirelessly with one or two monitors.

    I played with the DNS (using automatic 8.8.8.8 etc. and DNS), I also run a PowerShell (tip forum) command and disabled non-Windows file extensions and all supplements but did not touch the registry other than adding two words for maximum 10 tabs/server. Nothing helps.

    Question: My Mini laptop too old and incompatible (surfing the internet) with Windows 10 or maybe Windows 10 faulty (buggy)?

    I am writing this post with my old Compac HP 8710p with the same monitor external but digital (DVI/HDMI cable) in VistaSP2 32bits Business that works like a 'charm' (pun intended). I could not even connect you to this forum with Windows (crash) 10.

    Any suggestions and help would be appreciated

    Track 5 September 19:00 (GMT + 8 hrs.)

    Not crashing with browsers (Edge and IE11) but still very slow and often-page response cannot be found and freeze, then after updating but I am now able to close the frozen pages (no more crashing, process in normal Task Manager). The message Windows Explorer app that it cannot read a statement in memory occurs that when my external browser is connected (2 active monitors) and does not show using my laptop just so it's probably Intel graphics driver related. I didn't know I was downloading Defender 5 updates yesterday that there is nowhere a notification in Windows, 10 with a slow (home, 2 G WIFI) internet connection may have caused some of my problems, but Microsoft has promised to look into the crash problems I brought today and I'll post the results shortly. I type this follow-up with my HP Mini and IE11, Windows 10...

    Frank

    To follow this thread on the Microsoft Forum please see:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-networking/HP-mini-110-3101tu-not-compatible-with-Windows-10/262e92c9-5f73-4333-BC46-fb5b229fbdea

    Frank

    Updated: 9 September

    I found three issues that I fixed and most of the problems have disappeared now, internet Windows response is still slow compared to VistaSP2 and IE9 but which can improve with W10 updated.

    The last driver Synaptics touchpad from Synaptics and Windows 10 fix1 support web page: load automatically downloaded an update.

    Correction 2: Downloaded Intel driver 3150 8.14.10.2230 (2010) of the web page of the HP support and ran Windows 10 compatibility check, saved results to setup.exe and then install the (older) driver on my graphics driver (2015) Intel 3150 more recent that I have downloaded from the Intel support web page but is not compatible with the HP Mini 110 series. This caused the accidents of Edge and IE11 (zoom).

    Fix 3: run 2 commands (admin) NETSH: netsh winsock reset and netsh int ip reset c:\resetlog.txt which improves the response of browsers, but after restarting the need for procedures to be repeated, if all goes well in a future update of the W10, will address this issue.

    I think that my HP Mini is now compatible Windows 10

    Frank

  • HP mini 110-1129nr with windows xp home edition, following the file is missing or corrupt \windows\system32\config\system model doesn't have a cd/dvd drive. Help, please!

    HP mini 110-1129nr with windows xp home edition, on said boot computer could not start because the following file is missing or corrupt \windows\system32\config\system computer has no cd/dvd drive. Computer does not load in safe mode, I ran disk hard main test self test it says completion test: failure, check the status: 7 (filled with the read element of the test failed). Help.

    You need an external DVD drive to get the repair will.

    Also the device you own does not seem to have built in the recovery partition. I'm not sure about later versions of this machine, however, it is best to check with HP.

    The problem is that there is a corruption of the registry on your OS or the system could not find where the registry files are due to system files or boot corrupted file.

    A repair can be made with an external DVD, the worst case, is that if the repair doesn't work you reinstall Windows.

    See this page from HP

  • Difficult to install windows xp on my hp mini 110-3012 you

    IWAS, try to install windows XP on my hp mini 110-3012 tu.but unfortunatelly cant. so I need help of pizza I Press f9 at startup and file loading but choose what time drive it couldn't find my drive.so I try change the bios sata setting, but I could find the system sata in bios Setup. So what is the best method I do.i tried nlite but stil not work.somewan please help.

    Hello:

    Please read this link below, and you will need to integrate the DCIS Intel NM10 controller.

    All the info/drivers you need is there.

    http://h30434.www3.HP.com/T5/notebook-operating-systems-and/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/TD-p/114120

    Paul

  • Compaq Mini 110 c - 1100 AC and Windows 7

    I recently tried to install Windows 7 Home Premium on my Compaq Mini 110 c - 1100CA, but the only thing that arises when it reads the disc is "your computer cannot run this version of Windows. You need a compatible with your computer installation disc. For more information, see system information from your computer. "I think it might be the fact that it is a 64-bit software. Is there a way for me to install it on my laptop? I need to download any programs to achieve? Thank you!

    Your Compaq Mini 110 c - 1100 CA computer uses the processor Intel® Atom™ Processor N270, which is only 32-bit CPU. You will never be able to install an OS 64 bit on this 32-bit computer.

    Please see the downloads of Windows 7 SP1, HERE and HERE.  Use these links to download the same version as your copy of 64-bit. The product key for your copy of 64 - bit will activate a copy of 32 bits of the same version. If you can't find the right version, "ei.cfg removal utility" is a simple tool that will remove ei.cfg from any Windows 7 ISO disc image... so to convert the image into a "universal" disk that will prompt the user to select an edition during installation, instead of being forced to use different disks for different versions of Windows 7.  Windows 7 USB/DVD Download tool to create the Windows 7 installation DVD or a USB Flash drive.

    If you have any other questions, feel free to ask.

    Please click the White Star of KUDOS to show your appreciation

  • Reinstalling Windows XP on Compaq Mini 110 c - 1100CA

    Hello

    I'm new to this forum, I am trying to reinstall windows xp on my Compaq Mini 110 c - 1100 CA.

    After formatting, you may not continue after loading the drivers because it does not find my sata HARD drive.

    I've looked everywhere on the web, I can't find much help on the Mini 110.

    in any case, I have tried everything I even made a copy of my xp cd and slipstreamed drivers sata on him. I'm totally lost please help someone.

    Thank you

    Sorry, by mistake, I wrote worng information in the previous post.

    Yes you should wake only ICH7M/MDH SATA AHCI Controller (not NM10).

    Here is the file doc with the guide 'How to integrate drivers Sata Intel (ICH7M) with XP' (use Microsoft Office or Open Office (free software) to open it).

    Here is the file pdf with the same guide (use Adobe Acrobat Reader (free software) to open it).

  • How to activate Windows 7 Starter 32 bit on my HP mini 110-3700 series netbook computer?

    Hello Microsoft community.

    I want to install new SSD in my HP mini 110-3700 Netbook but don't want cloning. I already went through this article and the response of Mr. André Da Costa. It seems very useful to me, thanks.

    I just want to know after the installation can I activate this with assistance from the product key that came with my netbook? and what is the purpose to edit the ei.cfg file when I already have the product key free with my Netbook?

    Thanks for reading. Help, please.

    The ei.cfg file determines which edition of Windows 7 is available on the support of that installation from, rather than display several editions during installation.

Maybe you are looking for

  • Modem on my M70 laptop problems

    Hello I have mobile M70 - 159. I used it for the dial to connect to internet in NEPAL, but it gave me a lot of hell of problem because it frequently supplier ISP disconnect me and she doesnâ? t connect to standard speed. I try to uninstall and instal

  • How can I connect a firewire camcorder to my Mac Pro mid-2010?

    I have a good Sony TRV900 camcorder which connects via Firewire, so how do I connect it to my Mac Pro mid-2010, which has no firewire connection? (I need to be able to transfer data from the Ribbon mini-DV camcorders for editing in Final Cut Pro)

  • Calibration SMU 4330 problem

    I tried to calibrate the SMU-4330 and getting coherent errors when you try to Gain accuracy test of the calibration Procedure 4330/4331 Express SC OR For the three brand new 4330 cards, I get an error in table 5 of the manual for the outputs of calib

  • 'HP Deskjet 3520 Series' shortcut opens in Notepad on Win XP.

    I have a Windows XP SP3 computer has 1.5 GB of ram. Just bought the printer, a series of e-all-in-one HP 3520. I just installed the driver software, first of all the Cd, and then the installation file downloaded from the HP web page. I uninstalled be

  • Can hard drive-can change, I use done records

    I need a new hard drive. If I want to use the same system of fact records? How can I find out if the drive is big enough but not oversize? I can do the job but don't want to software problems. This is due to the 4EOF:0244 error. I can't start mode wi