Restricted changed (motorcycle g)

I get this Notification every 30 seconds on my device (bike g with Kit Kat 4.4.4)

Restricted access changed

Emergency service is blocked.

do not use cut his recommended sim use sim original uncut get from your mobile operator.

I think that its not a bug but poor 3g signal, if you have selected the 3GS and you not getting don't no signal 3 then it turns into 2g you have restricted motorcycle g to use the 3g and it can not find 3g network it switches to 2g so forcefully changed its restricted access.

always I change sim to sim not circumcised and I have not found this problem, you can try with sim not circumcised too

give a boost to my comment, if this can help you

Tags: Motorola Phones

Similar Questions

  • Restrict changes to the desktop in Windows XP Pro

    I have two computers that are running Windows XP Pro.  They must be used to access the Internet and Microsoft Office programs.  I turned on the guest account so that a password is not necessary to log in.  Some features are blocked because the user does not have the correct privileges.  It is very good.  However, I do not want 'Guests' to be able to add or delete desktop icons or change the wallpaper or modify the operation of the taskbar.  How can I put additional restrictions on computers?

    Hello S Harris,

    Windows XP by default does not have the ability to set restrictions on standard users to access wallpapers and set other restrictions.

    There are several third party Applications which gives you an option to set the parental control on other user accounts. Research of Parental control software using your favourite search engine that will give you an ability to restrict access to users.

    DISCLAIMER OF THIRD PARTY SOFTWARE:

    Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    You can also see the article for more information about the guest account:

    http://support.Microsoft.com/kb/300489

    Thank you
    Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • LVOOP vs GOOP

    I recently started playing around with integration of LVOOP in my larger programs of LabVIEW.

    I have seen the terms LVOOP and GOOP thrown around, but I'm not entirely sure understand the difference.

    It's my understanding, please let me know if I am incorrect, or missing something.

    The two terms refer to using LabVIEW object-oriented way.

    In both types of programming, you can create a class.

    Using this class, you can create objects and methods of the class.

    The main difference would be how information stored/past.

    In LVOOP, the real objects are passed around,

    Whereas, in PORRIDGE, references to objects are passed, instead of the real object.

    Is this correct? Are there differences more?

    LVOOP is a native of LV

    GOOP has been implemented to Edevo of OOP, which has been implemented with the collaboration of the NC.

    They both allow application OOP in LV

    I've studied GOOP, but never used because of the way it has been implemented, using references. Access to private data allowed using a kernel which was a kind of uber-AE able to string anything. This implementation restricts changes rom developer work in the soul and thus, we have limited the use of what exposed kernel which were EXEMPLARY of the dat in the kernel. The part of COPIES, it's what has kept me out of PORRIDGE as my apps cannot simply cannot tolerate buffer copies.

    The great advantage for GOOP was UML support and could gen classes based on the UML language or gen the UML classes (to some extent at least).

    I believe that it is no longer being developed (but I could be wrong here).

    LVOOP is not knwolege of UML. It is very effective, as I have no stupid stuff. It is also very flexible.

    With the morder versions of LVOOP and the introduction of the LVOOP DVR (Ref data value) can now go refs to access the instance of the class data.

    Ben

  • What do you do? Best practices

    Hi all

    As always when I come to this point in PL/SQL and the database development I ask myself what to do. So I ask you guys and girls what do you do when you come to the same point I did.

    Here's a few example

    COM_TO_DO_STATUS table with values

    1. OPEN

    2 SOCKETS

    3. CLOSE

    1 question. Here, I have two options, I can create table like this and FK in my table of master or I can do in the columns of the table main varchar2 (5) status with the constraint checking on these values. What do you do?!

    With this I know something, if I need to add new status in a case, I need to insert data into another I need to modify the check constraint, but bear in mind these data or value will affect my business logic (sometimes I need to hardcode them in my store of procedures).

    Lets say now, I name PKG is COM_TO_DO_PKG and procedure

    for the first case of superior signature is p_send_to_status (p_to_do_id p_status_id number, number)

    for the second case of superior signature is p_send_to_status (p_to_do_id number, p_status_id in varcahr2)

    2. question. Now I have also two options here, I can create 3 constants in this pkg

    c_status_open_taks number (1) 1 default constant

    c_status_taken_taks number (1) default constant 2

    c_status_close_taks number (1) default constant 3

    or for the second case

    c_status_open_taks varchar2 (5) default constant 'OPEN '.

    c_status_taken_taks varchar2 (5) default constant "TAKEN."

    c_status_close_taks varchar2 (5) default constant "CLOSE."

    with this I'm not avoiding to a certain level of hard coding in the stored procedure, for example

    the call to this procedure will be like COM_TO_DO_PKG. P_SEND_TO_STATUS (some id, COM_TO_DO_PKG. C_STATUS_CLOSE_TAKS);

    lets say as if I get IF the declaration code will be as IF L_STATUS = COM_TO_DO_PKG. C_STATUS_OPEN_TASK THEN...

    BUT if I need to hardcode the opinion, I can't use this constants so is there any point with this approach. What do you do?!

    3. question. In this example, I only have 3 value, what happens if you have more like 15 or 20. What do you do?!

    4. question. Sometimes business logic will change, so I need to add an additional value. In this case what will be the best approach?

    OK guys thanks for your time and sharing of experience.

    PS Sorry if my English is not better.

    Thank you.

    The "scope" of the solution depends on the magnitude of the problem.

    One of the best "solutions" I used is a combination of techniques:

    1 put the data in a table owned by a GLOBAL user research

    2 making this READ ONLY table

    3 grant privileges to users/roles that needs a direct access table

    4. create GLOBAL SYS_CONTEXT features

    5. implement a start trigger that load the global context information

    6 implement the specific maintenance features for maintaining the table of primary research and the global context

    7 create views, if necessary, use the values of the global context

    The strategy above allows you to use almost ANY combination of what you are already thinking but provides the reach OVERALL, necessary to allow access to multiple applications/patterns to the same set of 'constant '.

    Steps 1-6 above are used to restrict changes to the table to a user/schema/code carefully controlled to ensure that the framework is in harmony with the data in the table.

    In other words, you cannot allow any user to manually manipulate the data of lookup table.

    Once the foregoing contains you can use one or all, suggestions that others do.

    COM_TO_DO_STATUS table with values

    1. OPEN

    2 SOCKETS

    3. CLOSE

    1 question. Here, I have two options, I can create table like this and FK in my table of master or I can do in the columns of the table main varchar2 (5) status with the constraint checking on these values. What do you do?!

    None of those.

    You use a table with a key substitution based on a sequence:

    create table COM_TO_DO_STATUS (batch NUMBER generated always as identity, status VARCHAR2 (15))

    Other tables use the batch column. One possible exception is in a data warehouse when there are use cases to denormalize the data (e.g. tables ready of the report). For these cases the real value of the SITUATION could be used.

    Lets say now, I name PKG is COM_TO_DO_PKG and procedure

    for the first case of superior signature is p_send_to_status (p_to_do_id p_status_id number, number)

    for the second case of superior signature is p_send_to_status (p_to_do_id number, p_status_id in varcahr2)

    Once again-, neither of those. This p_status_id is NOT just a number. It's worth a SPECIFIC column in the status table.

    If it should be defined in this way

    p_send_to_status (p_to_do_id number, p_status_id in COM_TO_DO_STATUS. BATCH TYPE %)

    This makes it clear to developers EXACTLY what value is supposed to be. Even if Oracle will not, indeed cannot apply this rule, it helps to document.

    lets say as if I get IF the declaration code will be as IF L_STATUS = COM_TO_DO_PKG. C_STATUS_OPEN_TASK THEN...

    BUT if I need to hardcode the opinion, I can't use this constants so is there any point with this approach. What do you do?!

    Cake using contexts

    http://docs.Oracle.com/CD/E11882_01/server.112/e41084/functions184.htm#SQLRF06117

    SELECT SYS_CONTEXT ('YOUR_GLOBAL_CONTEXT', 'STATUS_OPEN_TASK')

    FROM DUAL;

    . . .

    If l_status = SYS_CONTEXT ('YOUR_GLOBAL_CONTEXT', 'STATUS_OPEN_TASK')

    You can use contexts in view definitions. But you must make sure that the frame has already been loaded - from where the trigger for starting a load at startup

    3. question. In this example, I only have 3 value, what happens if you have more like 15 or 20. What do you do?!

    With the help of context which is IRRELEVANT!

    The table and the context are a copy of the data. And it is better to have ONE copy in a global context, only one copy for each user package.

    4. question. Sometimes business logic will change, so I need to add an additional value. In this case what will be the best approach?

    That is why this table feature and the search context must be owned/controlled by a GLOBAL user. You can't allow anyone do however the table and changes whenever they want to.

    You can certainly have a context for each application, if you need it, but the table itself changes are Records made using PL/SQL procedures and processes so that they can maintain the global context at the same time.

    Once you have started to use (whether or not global) contexts for this you won't be back.

    https://docs.Oracle.com/database/121/DBSEG/app_context.htm#DBSEG011

    An application context stores the user identification, which can be used to allow or prevent users from having access to the data in the database. You can create different types of application contexts depending on where you want to control access: the application, at the global level, or the customer.

  • Accessibility tools are grayed

    We have a DPF created in Livecycle. We try to go through the control of accessibility but most of the accessibility tools (such as 'Add keywords of the Document', 'full ' check...)  on the 'Accessibility' tab are grayed out. (I use XI Acrobat pro). So, what should I do to unlock these accessibility options?

    1.jpg

    Hi koryfan,

    Security is set to restrict changes to the document? If so, you will need to change the security settings to allow edits. File > properties > Security tab (you will need the password)

    I hope this helps.

    a 'C' student

  • New phone Restore - Code of Restriction has changed?

    So I got a new phone to replace a broken.  I restored from my last backup.  I was sure that I have no restrictions enabled on my broken phone.  However, catering for the new iPhone has allowed restrictions, and I can not get connected with the last restriction code I had set and even have the code stored in my password program.  I have even tried all the other 4 digit code that I've ever used, and none of them works.

    Is there a problem with the restorations of corrupt or modify the restriction code?

    So it appears I have to completely wipe my phone via iTunes and start again because the backup and restore process has somehow allowed restrictions and changed my restriction code.  So much for the backup of my phone.

  • I forgot the pascode restrictions how to change

    Hello

    My restrictions are 'On' but I don't turn them on. He now wants a password. I don't know this password! How can I change because I need to reset the settings of my!

    Please help me!

    Unless you can figure out who have access to your phone and set the password and have them removed, you will need to erase the device and restore like new:

    Restrictions of use on your iPhone, iPad and iPod touch - Apple Support

  • Restricted access has changed

    I'm getting frequent notice about "Changed to restricted access, emergency Service is blocked. I don't know why it is so frequently. It is related to which of the functions? Can someone tell me please how to disable it?


  • Cannot change anything in the settings of Restrictions

    I am the scene long distance technical support for iPad from my mother.  In his screen settings Restrictions, she can't shut down on one of the buttons and clicking on other sections does not allow/disallow changes screens.  Basically, it seems that the Restrictions screen is completely broken and does not accept any entries.

    She must type "Activate Restrictions" at the top of the screen and create a password first.

  • Motorcycle delivery restrictions 360

    I ordered a 360 motorcycle.

    After that FedEx has tried to put it back (much faster than expected) I tried to have the package which is held at a local FedEx facility.

    I was told, by a representative of FedEx and the automated system FedEx, the sender had imposed restrictions on the package that would not do. Online, the option for the entire holding is grayed out and cannot be selected. My only option is to sign the door tag and allow them to leave the package without supervision.

    I told FedEx to return the package, since it is a waste of time to attempt to deliver a package when nobody is here several times.

    I had other deliveries of Motorola, that is held for me without problem. Is it because they are on an expedition of China now?

    Why this restriction is placed on the delivery?

    So, where to get rained on my grandchildren ball game and get over being mad, I called FedEx.

    They will hold the package - but only somewhere in FedEx 31 miles of me since this is "destination facilities."

    I arranged to pick it up tomorrow.

    I was told that the restriction is due to the size of the package?

    This must be addressed to end of the bike. Being able to have a package which is held in a local location of FedEx works very well for those who work. I had large and small packages (bike X 2014 and ZenWatch of my wife) packages (running boards for my truck) which had held this way., so I do not understand the size of the package has to do with this restriction.

    In any case, I'll have time tomorrow - if I get off work early enough to arrive instead of FedEx before they close and if they have as they say that they will be.

  • I forgot my restriction password on my iPad Air and I want to change some settings in this topic, how can I do this but still keep my original content on it?

    I forgot my restriction password on my iPad Air and I want to change some settings in this topic, how can I do this but still keep my original content on it?

    Sorry, but you can't. If you have forgotten your password for the restriction, you must restore the device to a backup made before the restriction code on the device, or restore it as new.

    Sorry,

    GB

  • Made a change in Group Policy: how to disable: "this operation has been cancelled due to restrictions in effect on this computer" notification?

    "This operation has been cancelled due to restrictions in effect on this computer"

    There seems to be a lot of people who get this notification.  Too bad Microsoft chose not to tell us why its happening!

    Is it possible to disable this notification?  I've made a few changes in group policy limit some startup programs.  Now, I suppose that this appears when the program tries to start.  Really irritating.  Maybe there's something in group policy to restrict the notification?  Then there will be another notification telling me that this notification applies?  Laughing out loud!

    Hello

    I suggest you to ask your question in the Forum Pro Windows XP IT for assistance. We have a dedicated team to help you with such questions.

    Hope the information is useful.

  • Unauthorized for restriction administrator settings changes.

    (OS = Home XP SP3, Internet through TDS via DSL, security = McAfee total protection). Recently I had problems with Google Chrome and Internet Explorer, but not with Fire Fox connectivity.  Both browsers load, but can not access the Internet despite a good strong connection. I get this error code for google, "error 102 (net::ERR_CONNECTION_REFUSED): unknown erro" and for IE , I get "Internet Explorer cannot display the web page" I have eliminated the problem is a problem with the server or website and or a problem of safety fire wall. In addition, I ran several antivirus and spy ware scans analysis but no help.  I used a lot of resources, Google and assistance Q / forums on the NET and the recurring theme on a solution to my problem seems to be proxy setting and the network settings for both browsers.  Here's where it gets weird and is the reason why I write, I, as the administrator am not able to make the adjustments of proxy settings because onIEbrowser under Tools option the NET has been locked, the operation has been cancelled, a box is displayed after I click on NET options and he says: '' operation cancelled due to restrictions imposed by the administrator. ''  Then who made these changes? I ask my self.  Hard ware? Virus? Don't know but I know he's been through, I guess, my virtual browser settings that follow me via Google Chrome / tool bar. where I have access to the net. Not sure why it did not affect browser Fire Fox?

    On Google the NET is accessible but the option for the proxy settings does not work, does not open.  Where there is a block to click on, and you can see where he comes, nothing happens.

    How can I reverse these settings and access my settings again?

    Hi Tabacon1,

    1. you remember to make changes to your machine before the problem?
    2. what Internet Explorer that you are using?

    I suggest that you follow the steps below and check, if it helps.

    Step 1:

    This problem can occur if the Inetcpl.cpl file is missing from the Windows \System or %SystemRoot%\System32 folder or if a restriction is set on the NoBrowserOptions Windows registry value.

    I suggest that you follow the steps mentioned in the article to resolve the problem.

    Clicking "Internet Options" in the Tools menu returns error message
    http://support.Microsoft.com/?kbid=216583

    Step 2:

    Regarding "Internet Explorer cannot display the web page", you can follow the methods listed in the section below.

    You receive an error message in Internet Explorer: "Internet Explorer cannot display the webpage".
    http://support.Microsoft.com/kb/956196

    Questions about Google chrome, I wish that you get support for Google chrome for better help.

    http://www.Google.com/support/chrome/?hl=en

    Aziz Nadeem - Microsoft Support
    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • A framework has changed - "this operation has been cancelled due to restrictions on this computer"

    When opening an email, I can't open links sent to me.  I get a pop up message: "this operation has been cancelled due to restrictions on this computer" If you please help me change this setting to allow me to open links sent in e-mails.

    When opening an email, I can't open links sent to me.  I get a pop up message: "this operation has been cancelled due to restrictions on this computer" If you please help me change this setting to allow me to open links sent in e-mails.

    Usually, it is because your Internet Explorer or your main browser lacks all faults.

    Start < default="" programs=""> set your default programs > column to the left, click on your main browser.
    He said "this program has all its defaults"?
    If not, click on choose by default for this program > put a check mark on all the items in the list > click on save when finished

  • How to change the number of values in the hour that are restricted.

    Hello

    May I know how to change the number of values in the hour that are restricted.

    In fact, we have improved of obiee in obiee 11g 10g. Data base is the same for Both.In 10 g the prompt value is limited to show only 35 records per page. As we passed it shows only 35 Records in 11g also. How can I change this limit to 11g.

    Please suggest me! Its urgent!

    Thanks and greetings

    Navnitha

    Hello

    In the advance tab we have the XML of the upgraded report, copy it into a Notepad and try to find the line beginning as below

    In 10g, we have something like below, simply remove the choicesPerPage = '35' from 11 g OBIEE XML report

    Thank you

    RAM

Maybe you are looking for

  • How can I get Windows XP without knowing the password?

    I received a laptop from a deceased parent and it has two user accounts and I do not know the password either.  No one in the family knows them either.  I tried CTRL DEL twice to try to get to the construction in the account administrator, but they m

  • Vista Home premium 64-bit does not detect projector

    When I try to connect to my Dell Inspiron 1521, Windows Home Premium 64 bit laptop computer to a projector, nothing happens. Can someone help me solve this problem

  • I can't access any site adobe of Sudan even if sanctions were lifted for more than 4 months now, which must speak?

    I am in the Sudan and we still cannot access adobe.com or behance.net because of U.S. sanctions on Sudan, but the February 2015, the U.S. Government has issued a general license for the export of hardware and software "incident to personal communicat

  • Laptop Oracle database

    Hi all11.2.0.1Win7 and Linux 6I have a 32 GB size flash drive.I rode on my laptop Win7 as E:\Then I installed oracle inside. everything about oracle's inside.So, I have a database running oracle on my flash/USB.Then I stopped and take it apart.I then

  • jump the GPT disks in converter?

    Hey everybody!Trying to convert a physical Windows 2003 which has a GPT disk, is it possible to tell converter to stop being narrow minded and let me choose the disks I want to convert? Its stupid it expel as soon as it detects a GPT disk with an err