Restricting access to Internet WRT160N problem

I use router WRT160n.

I used the access restriction to restrict internet access for 12-05:30 every day.

during 12-05:30 every day, when I use my laptop to access the internet by wifi, the site is blocked, and internet access is limited. This works correctly.

However, when I connect the lan from my laptop to the router and try to access the internet, I can browse the site normally. I can browse google, yahoo and all Web sites. in this case, the access restriction cannot funciton properly.

My question is:

Why restricting access can work when I use the lan cable to connect to the router?

How do I fix this so that the router can block all access to the internet, even when I use the lan cable to connect to the router?

Thanks for your help!

If you are using an ethernet cable, your computer uses a different MAC address and a different IP address on your local network. Basically, for the router, it looks like a completely different computer. You need to add the IP address or a MAC address restriction policy.

Tags: Linksys Routers

Similar Questions

  • Remote access over Internet connection problems

    I'm trying to figure out how to get remote access to work via the internet. I used to work and it works very well, but we are also on a local network. I have sent the invitation to someone and the password, but it does not connect. I tried the following:

    • Computer Management / Services / connection manager (manual) remote access & routing and remote access (manual)
    • Windows Firewall / allow a program... / Exceptions / Allow: Remote Assistance & routing and remote access
    • Disabled Norton Firewall

    I have alos got my friend to make sure that its parameters match mine. And I still have no success. Does anyone have other ideas? Alternatively, it won't work because I am trying to connect via the internet?

    Hi nataar, 

    Welcome to Microsoft Answers Forums.

    • What software do you use for remote access?
    • What is the version of Windows installed on the computer?

    If you use Remote Desktop connection in Windows Vista, try the procedure below

    Log your PC computer with an account that has administrator privileges.

    Step 1 open the start menu, right-click on "My computer" and select "Properties". A window with the options and details of the computer opens on your screen.

    Step 2 go to the 'Remote' tab at the top of the window "Properties".

    Step 3 check the box for the option "Allow users to connect remotely to this computer" in the section "Remote Desktop" in the Properties window.

    Step 4: click on the 'Apply' button at the bottom of the window to save the changes and enable the remote desktop. Outside users will now be able to access your computer over the Internet.

    Enabling remote desktop access to your computer

    To activate the Office remote connections to your computer, follow these steps:

    1. Click Start, right-click computer, and then select Properties.
    2. Under tasks, click settings on the remote control and confirm the user account control prompt.
    3. Select allow connections from computers running any Version of remote desktop. (Version 'more safe' only works on using IPSec security, and on these networks business networks, you probably will not be allowed to change these settings in any case).
    4. By default, all administrator-level accounts can connect to the computer. If you want to grant remote desktop access to a limited number of users, click Select users, add, advanced, find now and then find the desired name in the search results section. Double-click it. To add another name, click Advanced and find now again.
    5. Click OK to close the dialog boxes.

    NOTE A password must be set on a user account before the user can connect to the remote computer.

    At this point, you must do two things to make sure that remote desktop has been implemented correctly:

    • Click Start, Control Panel. Under Security, select allow a program through Windows Firewall and confirm the user account control prompt. On the Exceptions tab, find the Office remotely in the list of Exceptions and do not forget, that it is checked. If it isn't, check it out. On the general tab, make sure that block all incoming connections is not checked.
    • Use another computer to test the remote desktop before you get involved in the Internet game. Follow the instructions in the second part of the chapter to open the desktop client remotely on another computer on your network. As the host name, type the name of the computer you just put up. Make sure that you can connect on your own local network before continuing.

    Remote Desktop connection: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/Remote-Desktop-connection-frequently-asked-questions

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Is it possible to restrictions to the remote desktop users to access the Internet?

    I'm really stuck on this.

    All clients connect to the server by using Remote Desktop Session of work.

    The condition is now, I want to connect internet connection server.

    I intend to install TeamViewer so I can access the server when I go on vacation, if a problem occurs or the customer need my help something.

    The boss, don't want any employee not be able to access the internet, so now I'm stuck with it.

    Forget to mention, I'm using Windows Server 2008 R2 x 64.

    Is it possible to do this?

    I tried to look for possible ways on GPEDIT. MSC to make the restriction, but it seems that there is not something like that.

    Please help and sorry for my bad English.

    Thanks for all the help.

    This issue is beyond the scope of this site and must be placed on Technet or MSDN

    http://social.technet.Microsoft.com/forums/en-us/home

    http://social.msdn.Microsoft.com/forums/en-us/home

  • Load firefox 3.6.14 and now can't access the internet. Computer restored to the previous version works now. 3.6.14 I tried again and the same problem, any ideas?

    Using windows 7. As soon as the update of firefox, I can not access Internet. I tried Internet Explorer works well. I have restored the previous computer Firefox and it works fine. Tried the update again and the same problem can not access the internet.

    This is usually caused by a firewall blocking the new version of Firefox. For more information, see https://support.mozilla.com/kb/Cannot+connect+after+upgrading+Firefox

  • When the phone rings it temporarily blocks access to internet on my laptop. I ran "Troubleshooting" and he said the teredo tunneling adapter microsoft has a driver problem (code 10)

    Teredo tunneling adapter error: Code 10

    I have a wireless modem in my house.  When the phone rings it temporarily blocks access to internet on my laptop. I ran "Troubleshooting" and he said the teredo tunneling adapter microsoft has a driver problem (code 10) and I have to click "Reinstall driver" I did.  But it will not re - install.  I'm not too irritable.   Can help you.

    In addition, I don't know if there is a related problem, but my laptop takes a long time to communicate with the printer.   The doc will be in Quebec but does not print.

    Thank you.

    Hi LindaGreenwood,

    1. what operating system is installed on the computer?
    2. you have made no changes to the computer before the broadcast took place?

    Generated 10 error code when Device Manager does not have enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

    Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
    http://support.Microsoft.com/kb/943104

    I suggest you uninstall the drivers completely uninstall and then reinstall the drivers from the manufacturers Web site.

    Updated a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  • Windows Vista gives me an unidentified network problem. I can't access the internet.

    Cannot access internet. what I do?

    Hello

    Did you change your computer?

    Method 1:

    I suggest you to see link and check.

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Method 2:

    The problems of Internet connection

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

    WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

    Method 3:

    I also suggest you to reset TCP/IP

    To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself: http://support.microsoft.com/kb/299357 .

    See also:

    How to troubleshoot network connectivity problems in Internet Explorer

    http://support.Microsoft.com/kb/936211

    Note: disable the Windows Firewall and antivirus may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.

  • Internet security problem - I got a security alert was attacking my computer or filtered in and I could not access the internet

    Yes, all of a sudden, I got a security alert was attacking my computer or filtered in and I could not access Internet, I advocate for window / malware scanning and also, mcafee for extra security, but it happens still., why? Then a few days later, I was able to get on the internet again, only about 2 days, now I can no longer access the internet, Iget, open with file, message, so I guess I have to reinstall internet explore, some of my applications are not running, but I think that their always there.  I have scan Windows / Defender and mcafee installed and running on my computer, so what's the problem here?

    Hello

    Download update and scan with the free version of malwarebytes anti-malware

    http://www.Malwarebytes.org/MBAM.php

    You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

    http://www.bleepingcomputer.com/download/anti-virus/rkill

    If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.
  • cannot access the internet wireless or wired. Not a router problem.

    I'm running windows vista on a dell xps m1330 laptop computer.

    My computer recently went crazy; blue screen came, said something about a dump of memory and rebooted. I was then invited to enter the product key windows again and re save my copy of windows. It worked well, but since I can't access the internet. I tried to use wireless and wired connections, but it just says: "unidentified network: local only.

    I tried watching drivers etc. but am not too computer savvy and nothing seems obviously wrong. I ran a mcafee, defender of windows and malware bites scans and nothing shows.

    Oh and certainly nothing to do with the internet/router, I run several other computers with no problems.

    I feel like a fool now I locked my firewall when the computer crashed and I forgot to turn it off!

  • Windows Vista cannot access the internet, the link speed and Duplex negotiation seems to be the problem

    I have a desktop running Windows Vista Home basic and I can't connect to the internet through a local network, which is connected through a router (Belkin). Adapter type is Internet: Intel 825562V-210/100

    After consultations with the support of technichal society of router and my PC vendor, it seems that there is aproblem with negotiating the link speed. Here are some symptoms:

    I can access the internet if I connect the cable directly to the modem;

    Connected through the router, I can sometimes connecting to the internet if Imaually change settings of connection speed (10 / 100 Mbps, half/full duplex)

    All other PC connected to the network, using Win Vista and throuhg connected to the same router, have access to the network;

    If I connect my network cable to another PC, it will have access to the internet;

    The status of my PC seems to be 'connected' on the site of implementation of routers. The State of my connection is sometimes "Local only" sometimes "Local and Internet", but in fat, there is no internet access.

    I tried the following:

    Trouobleshooting under the direction of the technical support of the router and PC vendor.

    Update the operating system to restore to an earlier date, to restore to the factory settings; Reformatting my PC 2 times, (first internet worked for a few hours only); update the OS (by connecting directly to the modem); Turning off Win Defender, removing software antivirus. Reset LAN connection...

    Any suggestion please?

    New router solved the problem.

    Thanks a lot, especially Jack :-).

    P.J.

  • Wireless connectivity problems: Windows Vista displays connected to the internet with good signal, but cannot access the internet more than a few seconds.

    Hello

    Recently, I brought a Dell with Windows Vista and a Belkin Wireless adapter in my house somewhere else. The computer has never had problems connecting to wireless internet on the other networks, however since the move I was not able to access the internet. Sometimes the network shows only a local connection and not Internet and other times, the network has a strong signal, a network identified and even an internet connection, but when I open any browser, it is only able to load the Google homepage and I cannot navigate anywhere else. I turned off all firewalls and even uninstalled all 3rd party software protection. I checked all my browser settings and made sure they detect automatically the IP settings and proxy settings. In other words everything seems in good shape, but I still have no navigation capability. Any ideas?

    It turns out that I had to remove all the old Wireless USB software that had been used previously (there had been other versions of Belkin and Linksys). I then used the computer from my friend to download suitable driver on the Belkin site for the internet adapter USB I used and BAM.

  • Windows 7 Home premium network problem, computers can access the internet, but they do not see each other on the network

    I was trying to set up a homegroup on my main computer, but on the second computer, I never had the opportunity to join the homegroup. I'm sure that I have everything set up properly, but I can't get the second computer to join.

    I have a switch that my internet runs and a cat cable goes to each computer. Each computer can access the internet without any problem, but none appear in other network list. They have the same name of working group, I just can't understand it. I use Windows Firewall.

    Any help would be greatly appreciated.

    Maybe this can help.

    ----------------------

    Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

    Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

    Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.

    Public share
    = network Public (as Internet Café) in order to reduce security risks.

    For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

    http://www.ezlan.NET/Win7/net_name.jpg

    Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

    General example, http://www.ezlan.net/faq.html#trusted
    Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

    ------------------------------

    If your network consists only of Win 7 and you want a simple network, use it.

    http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

    After you have configured the homegroup, scroll to the bottom for the Permission/security section.

    -----------------------------

    Win 7 networking with other version of Windows as a work network.

    In the center of the network, by clicking on the type of network opens the window to the right.

    Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

    http://www.ezlan.NET/Win7/net_type.jpg

    Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

    Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

    Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

    Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
    Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

    Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
    Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

    When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

    -------------

    If you have authorization and security problems, check the following settings.

    Point to a folder that wants to share do right click and choose Properties.

    In the properties

    Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

    This screen shot is to Win 7, Vista menus are similar.

    http://www.ezlan.NET/Win7/permission-security.jpg

    The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

    When everything is OK, restart the network (router and computer).

    * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

    * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

    ---------------------

    *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • restrict access to the php page problems

    I'm trying to use the dreamweaver php restrict access server behavior and will have success on both my local maching and my own host. However, the same script does not work on the server of a customer hosted by Verio on a Windows shared hosting plan.

    index.php = login page
    Login.php = forwarding connection failed
    client.php = page with a script to restrict access.

    If I remove the script of restricted access, I was able to connect fine and see page client.php. However, if I understand the access restricted in the client.php script, I get kicked to the login.php page. I only check the username and password, not the user level.

    Here is a brief overview of the two assemblies

    localhost:
    MacBook pro running apache
    PHP 5.2.0, mysql 5.0.22
    register_globals = Off

    Client server:
    Host = verio
    Windows shared hosting plan
    PHP 5.2.0, mysql 5.0.24a
    register_globals = Off

    Session settings are the same as the file phpinfo.php (with the exception of the local value of the session.save_path to the verio server)

    I can return the value of the username (and pass) using the {print $_SESSION ['MM_Username'] ;} on client.php page when I comment on the script to access restricted on the client files.}

    I wonder if there is a php setting that is causing the problem?

    Any help is greatly appreciated.

    Kind regards

    Mike

    According to media, the current windows has limited hosting plan supports for php scripts.

  • WRT160N is unable to access the internet but who still have network connectivity

    I have a PC attached by a cable and a PC and a laptop connected wirelessly to my router. Someone knocked taking sheets, so I reconnected it and now I can't access the internet even if I still have access to the network and I can get readers shared on all machines. I can ipconfig all machines and get Ip etc. I ping too the other machines on the network, but Firefox and IE will not go to the internet

    I plugged the cable directly from the modem to 2 machines and get internet access. I rebooted router, modem, and workstations many times. I even put in the disk of router and crossed all configurations, once more and it went well but still the same result.

    I have no wireless phones, but they have a wireless printer that I bought a few weeks but dounbt that this would hinder.

    The router is only a few months old, ideas?

    Your router could have lost configuration settings and may need to be reconfigured.

    Since you're online with the modem then you reconfigure router following this.

    For connection cable and broadband connection.

  • How can I allow one of my children to use local applications, while temporarily blocking his access to the Internet and while allowing children to continue to access the Internet?

    I have three children who have separate user accounts on our two computers. Both computers running Windows 7 Home Premium edition. We use Windows Live Family Safety on each computer to our parental controls for defining when and what each child can access. We used the period of parental control feature to block every child signed to computers, except when we allow. (It would be nice if we could block a computer and allow them to use the other.)

    However, I can't find a way to allow a child to not use the computer for local activities (for example, Microsoft Word), while blocking its access to the Internet. I also want to allow his brothers to continue to use the Internet during this time.

    Any help would be appreciated. Thank you.

    Hello

    Windows parental control have no option to directly block access to the internet in a Windows user account, because the system needs to provide activity reports. To work around the problem, you can block all internet browsers available for this user account so that the child have no way to access the internet. Restriction of the app to access the control that installed programs on the computer children.  Here are the detailed steps to block some apps:

    1. on any computer, log on to the parent account for http://fss.live.com

    2. click Edit settings under the name of the child you want to change the settings and then click the App restrictions.

    3. check the circle next to turn on the restrictions of the app.

    4. check all programs related to access to the internet or type the application in the area of Search apps .

    5. check the box next to the application or the program once it appears in the list.

    6. click on Save.

    This settings apply only to that specific user account. If you have any other questions, please let us know.

    Thank you!

  • How to allow customers using my laptop to access the internet?

    as an administrator of this computer how to let guests have access to the internet by using the dial-up usb modem or wireless?

    I suggest that you leave the guest account disabled and create a standard user account for your guests with no password or a simple that you tell the guest needed.  Guest accounts more easily usable by hackers to access the system.  As a standard user account, it must have access to the internet unless you configired the system to restrict access to administrators or users - and I suspect you did not have that.  If the internet is not connected, you may need to do that yourself, because you can not disclose the user name and password to someone else (and if it is set to auto mode, it will use the guest account information which will be wrong). Once connected, simply use Internet Explorer without any problem.  It should work with USB modem or wireless - any network you choose to use.

    I hope thi helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Maybe you are looking for