Restricting access via AAA auth group AnyConnect IKEV2

Similar Questions

• Configuration of the ACL to restrict access via SSH/Telnet

  You want to shoot a SSH/Telnet access to ISP address/IP of my switch interface.  Since the Dells have no strict vty/con interface to apply an ACL I guess I just have to match on an interface instead.  Using the ACL below.  Problem is that applying it kills telnet/ssh sessions completely and does them in.  Replaced the iPs in the wrong example with IPs.  Confirm that my public IP address is 112.94.236.58.  You will see a 112.94.236.56/29 with a permit instruction.

  TEST from the list of access permitted tcp 111.126.50.0 255.255.255.0 111.126.50.16 255.255.255.0 eq 22

  TEST from the list of access permitted tcp 111.126.50.0 255.255.255.0 111.126.50.16 255.255.255.0 eq telnet

  TEST tcp allowed access list 112.94.236.56 255.255.255.248 111.126.50.16 255.255.255.0 eq 22

  TEST the access permitted tcp 112.94.236.56 list 255.255.255.248 111.126.50.16 255.255.255.0 eq telnet

  TEST from the list of access permitted tcp 112.94.254.0 255.255.255.128 111.126.50.16 255.255.255.0 eq 22

  TEST from the list of access permitted tcp 112.94.254.0 255.255.255.128 111.126.50.16 255.255.255.0 eq telnet

  TEST the access permitted tcp 112.94.248.176 list 255.255.255.248 111.126.50.16 255.255.255.0 eq 22

  TEST the access permitted tcp 112.94.248.176 list 255.255.255.248 111.126.50.16 255.255.255.0 eq telnet

  access list tcp TEST refuse any 111.126.50.16 255.255.255.0 eq 22

  access list tcp TEST refuse any 111.126.50.16 255.255.255.0 eq telnet

  TEST the ip access list allow a whole

  111.126.50.16 is the switch

  Maybe I should use a destination host in the ACL instead?  (edit, nope, tried with a subnet of 255 s all, same problem)

  The ACL is created using the command access-list config mode.  On the interface it won't let me use ip access-class.

  Figured it out.  Kept, see references to "MACL", think why I needed a MAC access control list.

  Nope.

  Dell world, this means access control list management.

• How to restrict access to the service web application deployed on weblogic for user group only

  I built the web service application in jdevelopler 11.1.1.7. Their security policy applied in the web service of the default Oracle policy which is (policy: Wssp1.2 - 2007-Https-UsernameToken - Plain.xml)

  Now all want to access the web service application must provide the name of user and password in the header section of the SOAP request to meet the requirement of the policy.

  the following steps I'm trying to restrict access to the application of web service with a specific group of users among users of weblogic:

  Connect to the weblogic administration console

  Create user or group of users

  Click on the links of deployments

  Select your web service

  Click the Security tab

  Click the sub-tab political

  Choose your authorization provider in the menu drop-down (looks like by default)

  Choose Add Conditions-> Group-> Type in the name of the Group

  Finishing

  But access is always available for all weblogic users (IE users not in the group specified in the above security configuration). How can I restrict access to only authorized group? Any thing lacking in my approach?

  There is nothing wrong with the steps mentioned in the question. In addition, you must do the following

  At the time of the application deployment with regard to the security part, there is a list in the title of the question (which security template you want to use with this application?)

  You must select (Advanced: use a custom template that you have configured on the page of configuration of the Kingdom) a configuration mentioned in the question will be work

• AAA - group restrict access to log on to all the NDG one excpet

  I recently created a group of users to only be able to close and unshut interfaces using the aaa allow config-commands and have all the groups concerned etc... implemented and applied. Now, my problem is that new users can now log in to any device on the network (can not do something else that see the worm and show logg) I need to prevent them from accessing anything else the group I've specified in group settings.

  OK, so you have a group of admins who should be limited to a single NDG devices work?

  Create an IP address based in the Group NAR relavent ACS, make a "permit" and specify the name of the NDG, this group is allowed access.

  If a user in that group tries to connect to any other device they will be filtered.

  Mounira

• How to restrict access to certain pages of a user group

  I want to restrict access to certain pages in my application to a set of users only. How can I achieve this.

  use the authorization scheme for permission to the users group"

  See also follows her

  Schema authorization using the APEX authentication scheme

  security - authorization roles and user in Oracle Apex? -Stack overflow

  How to create the schema for permission for the users group.

  Leave.

• Cannot access within LAN of Cisco Anyconnect

  I'm new to the firewall and try to get my Anyconnect test configuration to connect to addresses within my Local network. The Anyconnect client connects easily, I can get to addresses Internet and tracer package told me it falls to phase 6, svc-webvpn. Can someone post my config? I don't know I'm missing something pretty obvious. Config is pasted below:

  !

  interface Ethernet0/0

  Description< uplink="" to="" isp="">

  switchport access vlan 20

  !

  interface Ethernet0/1

  Description< inside="">

  switchport access vlan 10

  Speed 100

  full duplex

  !

  interface Ethernet0/2

  Description< home="" switch="">

  switchport access vlan 10

  !

  interface Ethernet0/3

  switchport access vlan 10

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  Shutdown

  !

  interface Ethernet0/6

  Shutdown

  !

  interface Ethernet0/7

  Shutdown

  !

  interface Vlan10

  nameif inside

  security-level 100

  IP 192.168.1.99 address 255.255.255.0

  !

  interface Vlan20

  nameif OUTSIDE

  security-level 0

  DHCP client dns update

  IP address dhcp setroute

  !

  Vlan30 interface

  No nameif

  no level of security

  no ip address

  !

  Banner motd

  Banner motd +... +

  Banner motd |

  Banner motd | Any unauthorized use or access prohibited * |

  Banner motd |

  Banner motd | The Officer allowed the exclusive use.

  Banner motd | You must have explicit permission to access or |

  Banner motd | configure this device. All activities performed.

  Banner motd | on this unit can be saved and violations of.

  Banner motd | This strategy may result in disciplinary action, and |

  Banner motd | may be reported to the police authorities. |

  Banner motd |

  Banner motd | There is no right to privacy on this device. |

  Banner motd |

  Banner motd +... +

  Banner motd

  boot system Disk0: / asa824-k8

  passive FTP mode

  clock timezone cst - 6

  clock to summer time recurring cdt

  permit same-security-traffic intra-interface

  ICMP-type of object-group DEFAULT_ICMP

  Description< default="" icmp="" types="" permit="">

  response to echo ICMP-object

  ICMP-unreachable object

  ICMP-object has exceeded the time

  object-group network obj and AnyConnect

  host of the object-Network 192.168.7.20

  host of the object-Network 192.168.7.21

  host of the object-Network 192.168.7.22

  host of the object-Network 192.168.7.23

  host of the object-Network 192.168.7.24

  host of the object-Network 192.168.7.25

  access-list 101 extended allow icmp a whole

  !

  Note access-list ACL_OUTSIDE < anyconnect="" permit=""> >

  ACL_OUTSIDE list extended access permitted tcp everything any https eq

  ACL_OUTSIDE list extended access permit icmp any any DEFAULT_ICMP object-group

  !

  VPN_NAT list extended access permit ip host 192.168.7.20 all

  VPN_NAT list extended access permit ip host 192.168.7.21 all

  VPN_NAT list extended access permit ip host 192.168.7.22 all

  VPN_NAT list extended access permit ip host 192.168.7.23 all

  VPN_NAT list extended access permit ip host 192.168.7.24 all

  VPN_NAT list extended access permit ip host 192.168.7.25 all

  access-list extended sheep allowed ip group object obj-AnyConnect 192.168.1.0 255.255.255.0

  pager lines 24

  Enable logging

  timestamp of the record

  logging buffered information

  logging trap information

  exploitation forest asdm errors

  MTU 1500 inside

  Outside 1500 MTU

  mask 192.168.7.20 - 192.168.7.25 255.255.255.0 IP local pool AnyconnectPool

  ICMP unreachable rate-limit 1 burst-size 1

  ASDM image disk0: / asdm - 645.bin

  don't allow no asdm history

  ARP timeout 14400

  Global (1 interface OUTSIDE)

  NAT (INSIDE) 1 192.168.1.0 255.255.255.0

  NAT (OUTSIDE) 1 access-list VPN_NAT

  Access-group ACL_OUTSIDE in interface OUTSIDE

  !

  router RIP

  network 192.168.1.0

  passive-interface OUTSIDE

  version 2

  !

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  dynamic-access-policy-registration DfltAccessPolicy

  AAA authentication http LOCAL console

  Enable http server

  http 192.168.1.0 255.255.255.0 inside

  http 192.168.2.0 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Sysopt connection tcpmss 1200

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4688000 association

  Crypto-map dynamic dynmap 20 the value transform-set ESP-3DES-SHA

  map outside_map 64553-isakmp ipsec crypto dynamic dynmap

  outside_map interface card crypto OUTSIDE

  !

  ISAKMP crypto identity hostname

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  VPN-addr-assign local reuse-delay 120

  SSH 192.168.1.0 255.255.255.0 inside

  SSH 192.168.2.0 255.255.255.0 inside

  SSH timeout 60

  Console timeout 0

  management-access INTERIOR

  DHCP-client broadcast-flag

  dhcpd x.x.x.x dns

  dhcpd rental 43200

  dhcpd ping_timeout 2000

  dhcpd auto_config OUTSIDE

  !

  dhcpd address 192.168.1.150 - 192.168.1.180 inside

  dhcpd allow inside

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  NTP 216.229.0.179 Server

  SSL encryption, 3des-sha1-aes128-sha1 aes256-sha1 sha1 rc4

  localtrust point of trust SSL outdoors

  WebVPN

  allow outside

  AnyConnect essentials

  SVC disk0:/anyconnect-win-4.2.01035-k9.pkg 1 image

  SVC disk0:/anyconnect-linux-64-4.2.01035-k9.pkg 2 image

  Picture disk0:/anyconnect-macosx-i386-4.2.01035-k9.pkg 3 SVC

  enable SVC

  tunnel-group-list activate

  attributes of Group Policy DfltGrpPolicy

  Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn

  internal Anyconnect group strategy

  attributes Anyconnect-group policy

  value x.x.x.x DNS server

  VPN-tunnel-Protocol svc

  the address value AnyconnectPool pools

  type tunnel-group remotevpn remote access

  tunnel-group Anyconnect type remote access

  tunnel-group Anyconnect General attributes

  strategy-group-by default Anyconnect

  tunnel-group Anyconnect webvpn-attributes

  enable MY_RA group-alias

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  !

  global service-policy global_policy

  context of prompt hostname

  Auto-update 30 3 1 survey period

  Update automatic timeout 1

  call-home

  Profile of CiscoTAC-1

  no active account

  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address

  email address of destination [email protected] / * /

  destination-mode http transport

  Subscribe to alert-group diagnosis

  Subscribe to alert-group environment

  Subscribe to alert-group monthly periodic inventory

  monthly periodicals to subscribe to alert-group configuration

  daily periodic subscribe to alert-group telemetry

  Cryptochecksum:d41d8cd98f00b204e9800998ecf8427e

  : end

  Hello

  You are missing a NAT FREE for Anyconnect traffic would allow you to access inside the network.

  access-list allowed sheep ip 192.168.1.0 255.255.255.0 192.168.7.0 255.255.255.0

  NAT (inside) 0 access-list sheep

  Add these two lines in the config file and you should be able to access the network interior.

  Kind regards

  Aditya

  Please evaluate the useful messages and mark the correct answers.

• AnyConnect IKEv2

  I set up a new connection profile for remote access using IKEv2 instead of ssl. I used the following link for instructions:

  https://supportforums.Cisco.com/document/74111/ASA-AnyConnect-IKEv2-CONF...

  It's pretty simple, but it does not work for me. When I try to connect to the profile connection I get the following error:

  "Connection refused, mechanism of connection not allowed, contact your administrator."

  I have not configured any DAP records he is just using the default which allows all connections. I'm not really finding much too much information on this error, anyone know what I can do to fix this? Thank you!

  I just checked our ASA.  Your config is very similar to mine.  I don't have this line:

  anyconnect profiles ikev2-anyconnect_client_profile disk0:/ikev2-anyconnect_client_profile.xml

  I also have a newer version of deployed AnyConnect:

   anyconnect image disk0:/anyconnect-win-4.1.06020-k9.pkg 1 regex "Windows NT"

  I found the customers *. Profile XML can be a little touchy. Here is an example of XML profile that I use:

      "customer name"   "DNS name of device - must match certificate"   "group name"   IPsec  

• access to AAA server to remote problems

  Hi all. I can ping and trace to this GANYMEDE server. but I can't authenticate my telnet users. I configured local AAA relief so that he tries the remote server several times and then returns to the local GANYMEDE. I noticed the logs show the TCP FINS. Which indicates that I am actually reach the remote server, but the server sends a TCP FIN or is the server simply is not available, as indicated by the newspapers. Why the server will be not not accessible if I can ping and trace it.

  I also checked the NOC extranet firewall accepted my traffic through the RADIUS server. they took the newspapers showing that my traffic has been accepted.

  February 4, 2011 13:04:12: % ASA-7-609001: built internal local host: AAA_SERVER
  February 4, 2011 13:04:12: % ASA-6-302013: built 24726 for inner outbound TCP connection: AAA_SERVER / 49 (AAA_SERVER/49) to identity:17.2.2.2/28055 (17.2.2.2/28055)
  February 4, 2011 13:04:12: % ASA-6-113014: AAA authentication server unavailable: server = AAA_SERVER: user = vzz19
  February 4, 2011 13:04:12: % ASA-6-302013: built 24727 for inner outbound TCP connection: AAA_SERVER / 49 (AAA_SERVER/49) to identity:17.2.2.2/32029 (17.2.2.2/32029)
  February 4, 2011 13:04:12: % ASA-6-302014: TCP disassembly 24726 for interior connection: AAA_SERVER / 49 to identity:17.2.2.2/28055 duration 0: 00:00 bytes TCP fins 41
  February 4, 2011 13:04:12: % ASA-6-113014: AAA authentication server unavailable: server = AAA_SERVER: user = vzz19
  February 4, 2011 13:04:12: % ASA-6-302013: built 24728 for inner outbound TCP connection: AAA_SERVER / 49 (AAA_SERVER/49) to identity:17.2.2.2/39039 (17.2.2.2/39039)
  February 4, 2011 13:04:12: % ASA-6-302014: TCP disassembly 24727 for interior connection: AAA_SERVER / 49 to identity:17.2.2.2/32029 duration 0: 00:00 bytes TCP fins 41
  February 4, 2011 13:04:12: % ASA-6-113014: AAA authentication server unavailable: server = AAA_SERVER: user = vzz19
  February 4, 2011 13:04:12: % ASA-6-302013: built 24729 for inner outbound TCP connection: AAA_SERVER / 49 (AAA_SERVER/49) to identity:17.2.2.2/33702 (17.2.2.2/33702)
  February 4, 2011 13:04:12: % ASA-6-302014: TCP disassembly 24728 for interior connection: AAA_SERVER / 49 to identity:17.2.2.2/39039 duration 0: 00:00 bytes TCP fins 41
  February 4, 2011 13:04:12: % ASA-6-113014: AAA authentication server unavailable: server = AAA_SERVER: user = vzz19
  February 4, 2011 13:04:12: % ASA-2-113022: AAA marking GANYMEDE + Server AAA_SERVER aaa-server group MYGROUP as being broken
  February 4, 2011 13:04:12: % ASA-4-409023: method of rescue attempt LOCAL AAA for authentication of user vzz19 request: inaccessible Server Auth MYGROUP group
  February 4, 2011 13:04:12: % ASA-6-113015: rejected AAA user authentication: reason = invalid password: local database: user = vzz19
  February 4, 2011 13:04:12: % ASA-6-611102: failed authentication user: Uname: vzz19
  February 4, 2011 13:04:12: % ASA-6-605004: connection refused from 10.2.2.2/26089 to inside:17.2.2.2/telnet for the user "vzz19".
  February 4, 2011 13:04:12: % ASA-6-302014: TCP disassembly 24729 for interior connection: AAA_SERVER / 49 to identity:17.2.2.2/33702 duration 0: 00:00 bytes TCP fins 41
  February 4, 2011 13:04:12: % ASA-7-609002: duration of dismantling inside local host: AAA_SERVER 0:00:00

  Here is my config from aaa

  AAA-server protocol Ganymede MYGROUP +.
  Max - a failed attempts 4
  AAA-server host AAA_SERVER MYGROUP (inside)
  timeout 3
  Console Telnet AAA authentication LOCAL MYGROUP
  Console to enable AAA authentication LOCAL MYGROUP
  privilege MYGROUP 15 AAA accounting command

  I can ping AND trace on the RADIUS server

  ATLUSA01-FW01 # ping AAA_SERVER
  Type to abort escape sequence.
  Send 5, echoes ICMP 100 bytes to AAA_SERVER, wait time is 2 seconds:
  !!!!!
  Success rate is 100 percent (5/5), round-trip min/avg/max = ms 02/01/10
  ATLUSA01-FW01 # trace AAA_SERVER

  Type to abort escape sequence.
  The route to 151.162.239.239

  1 17.2.2.3 0 ms 0 ms 0 ms
  2 17.2.2.4 0 ms 0 ms 0 ms - extranet fire barrier
  3 10.4.7.1 0 0 0 ms ms ms
  4 10.4.7.13 0 0 0 ms ms ms
  5 10.4.7.193 0 0 0 ms ms ms
  6 AAA_SERVER (10.5.5.5) 0 ms 10 ms 10 ms

  You'll certainly need the assistance of the administrator of the AAA, troubleshooting on the AAA client side shows only a fraction of what's going on.

  Ask him or her to do the following:

  Much easier and the most important thing is to check an 'attempt' journal and watch if there is no entry at all for your ASA.

  If there is an entry, it should be automatic explaining like "Unknown SIN" or "Ganymede key bad argument" - be convinced on a good config and check it are two different things.

  I have seen weird things like walking into a key on an AAA server via remote desktop and keyboard settings were inconsistent: English/German, traded resulting from letters 'Y' and 'Z' - do not trust your config until it you checked.

  If there is no entry at all then it could be a device on the way which is allowing ping/traceroute tcp/49 but drops or a device is to translate the address of the ASA (well in this case, you should see an "unknown SIN" in the failed attempts).

  You have the possibility to connect a device inside the network of the SAA as a laptop? If so, try Telnet for tcp/49 of the AAA server, you should see immediately, if it is allowed tcp/49 (get a blank screen immediately = connectivity, timeout = no connectivity)

  That's all you can do on your side, unfortunately tha ASA isn't a telnet client.

  Rgds,

  MiKa

• Accounting session via radius or syslog AnyConnect?

  Hello

  Someone at - it a method of accounting deployed to save Anyconnect session details?  Are you a radius server or via recording messages to a syslog server?

  If Yes can help you with the appropriate configuration?  I seeks to save authentication successful and failed and duration of the session, connect and disconnect times.

  I've been playing with Anyconnect is authenticating to AD via ACS 5.1 but can't seem to get the accounting details, I need.  Similarly, I tried to catch the appropriate syslog messages but once again without much success.

  Thanks a lot for any input, St.

  What what you have configured for radius on ASA account management?

  You can paste the o/p of the aaa Server show and see the tunnel-group race

  Basically, all you need to define the radius server group and call this group under the tunnel-group settings.

  . - Configure the AAA server group.

  ciscoasa (config) # the RAD_SRV_GRP of the aaa-Server Protocol RADIUS

  output ciscoasa(config-AAA-Server-Group) #.

  . - Configure the AAA server.

  ciscoasa (config) #-RAD_SRV_GRP (inside) host 192.168.1.2 aaa Server

  ciscoasa(config-AAA-Server-Host) # key secretkey

  output ciscoasa(config-AAA-Server-Host) #.

  . - Configure the tunnel group to use the new configuration of AAA.

  ciscoasa (config) # tunnel - group ExampleGroup1 General-attributes

  ciscoasa (config) #accounting - server - group RAD_SRV_GRP.

  Once done, you can then establish a session and check the detailed accounting package on ACS 5.x range > monitoring and reports > catalogue > aaa protocols > radius account management.

  In case you don't see radius account management after following the above steps then please activate the RADIUS accouting and aaa debug ASA "debug". In this way, we can check whether or not ASA sends the details of the session accountinf to ACS.

  Kind regards

  Jatin kone

  -Does the rate of useful messages-

• How to restrict access to the drive of Wndows xp sp3?

  I have 3 user account on my computer, it is has the administrator rights and the other is a standard user account.

  I want to restrict access to all readers for the standard player.
  I used gpedit.msc to enable the administrative model, but it also limits the account admin and me to access the road
  OS: windows XP SP3
  Please advice
  Hi Utkarsh.Ranjan,
   
  If you want to restrict access to a drive by using the Group Policy Editor, you can not apply for a particular user account. This will change for the user accounts.
   
  You can't restrict access to the complete transmission. However, you can resrtict access to folders and files inside a car to a particular user.
   
  Refer to the section "set, view, change, or remove special permissions for files and folders" in the following article and follow the steps to remove the authorization of the user access to the file/folder.
  How to set, view, change, or remove special permissions for files and folders in Windows XP

• Hide the drop group Anyconnect logon window

  Hello community.

  Someone told me that it is possible to hide the drop Anyconnect group, so that only the user name field and the password is visible on the Anyconnect connection windows. See printscreen

  

  How do we have at least one group. We don't need this menu drop-down.

  Thanks in advance, patrick

  In ASDM, under Configuration--> VPN for remote access--> network (Client)--> connection profiles AnyConnect VPN you will see "Configuring the Login Page. Uncheck the box 'allow the user to select the connection profile... ". »

  So, you can remove the 'Alias' of the connection profile.

  Kind regards

  Kevin

  * Do not forget to note the useful messages but also to mark it as 'responded' once your problem is solved. This will help others find your solution more quickly.

• Anyconnect Ikev2 uses aggressive Mode

  Hello world

  I'm trying to fix the IKE Aggressive mode with vulnerabilities PSK on our Cisco ASA that runs old IPsec and Ikev2 Anyconnect VPN.

  When I run the command

  Crypto isakmp HS her

  User using IPSEC VPN

  IKEv1 SAs:

  HIS active: 25
  Generate a new key SA: 0 (a tunnel report Active 1 and 1 to generate a new key during the generate a new key)
  Total SA IKE: 25

  1 peer IKE: 63.226.x.x
  Type: user role: answering machine
  Generate a new key: no State: AM_ACTIVE

  Then, he tells me that this VPN client is using aggressive mode right?

  User using IKEV2 anyconnect

  Crypto isakmp HS her

  17 peer IKE: 192.206.x.x
  Type: user role: answering machine
  Generate a new key: no State: AM_ACTIVE

  IKEv2 SAs:

  Session-id: 361, status: ACTIVE UP, IKE County: 1, number of CHILDREN: 1

  Tunnel-id Local remote status role
  x.x.x.x/4500 1696279645 192.206..x.x/33328 answering MACHINE READY
  BA: AES - CBC, keysize: 256, Hash: SHA96, Grp:5 DH, Auth sign: RSA, Auth check: EAP
  Duration of life/active: 86400/24756 sec
  His child: local selector 0.0.0.0/0 - 255.255.255.255/65535
  selector of distance 172.16..x.x.144/0 - 172.16.x.x/65535
  SPI ESP/output: 0xa315b767/0xbec2f7cc

  Need to know anyconnect ikev2 does not share any key of share pre then why the number of line 17 shows AM (aggressive mode)?

  The ikev2 Protocol has nothing to do with the aggressive mode or main at all.

  If you do a 'sh crypto isa"it will show you the the ikev1 and his ikev2.

  If you still see a flow in the table, maybe it's a stuck session.

  To disable the aggressive mode, enter the following command:

  Crypto ikev1 am - disable

  For example:

  HostName (config) # crypto ikev1 am - disable

• Restrict access VPN client on IOS 12.4

  I'm trying to restrict access to the client VPN ports for the specific customer VPN leading to a router in 1841 running IOS 12.4 (9).

  With versions of IOS of pre-12, 4 that this could be done by using the ACL on the outside, but with version 12.4, it seems that VPN connections are allowed even without a declaration of "permitted" in the external ACL (similar to "sysopt connection permit-ipsec" on the PIX).

  Is it possible to limit the VPN traffic on the external interface of the client?

  See you soon,.

  Christoph.

  Hello

  The feature you're looking for is called:

  Access check crypto on plaintext packets

  Check it out in the Configuration Guide for Cisco IOS, version 12.4 security

  In sort, set the encryption to your ACL post, go into your crypto-map and apply it with:

  set ip access-group {access-list-number | access-list-name} {in | out}

• IPSEC RA - activate crossed but restrict access to the web

  ASA5520 8.2 (5) 30

  Greetings,

  I have an IPSEC RA strategy that has implemented to tunnel all traffic (no split tunnel) by the ASA (which ends on the external interface).  I need to be able to allow VPN users to access a web page (crossed) thesesame on the external interface.

  ++++++++++++++++++++++++++++++

  Here are the current settings:

  Group Policy Admins L internal

  attributes of Group Policy L_Admins

  value of server WINS 172.16.0.33 172.16.0.9

  value of 172.16.0.33 DNS server 172.16.0.9

  VPN-idle-timeout 60

  VPN-session-timeout 480

  VPN-value filter-admin-l

  IP 172.30.4.0 allow Access-list l-admin-test-filter extended 255.255.255.252 host 172.16.0.33

  IP 172.30.4.0 allow Access-list l-admin-test-filter extended 255.255.255.252 host 172.16.0.9

  IP 172.30.4.0 allow Access-list l-admin-test-filter extended 255.255.252.252 172.16.1.4 host

  IP 172.30.4.0 allow Access-list l-admin-test-filter extended 255.255.252.252 welcome 172.16.1.2

  access-list extended l-admin-test-filter permit ip 172.30.4.0 255.255.252.252 10.24.0.0 255.252.0.0

  IP 172.30.4.0 allow Access-list l-admin-test-filter extended 255.255.252.252 the host 172.16.0.233

  Protocol-tunnel-VPN IPSec

  Split-tunnel-policy tunnelall

  value by default-field IHI.local

  type tunnel-group L_Admins remote access

  attributes global-tunnel-group L_Admins

  address ili_global pool

  PhoneFactor authentication-server-group

  Group Policy - by default-L_Admins

  IPSec-attributes tunnel-group L_Admins

  pre-shared-key *.

  ++++++++++++++++++++++

  Crossed is not currently enabled, so I guess I have to add:

  permit same-security-traffic inter-interface

  and (I guess)

  mask IP local pool l_admins 172.30.4.1 - 172.30.4.2 255.255.255.252

  Global (outside) 1 interface * PAT IP

  NAT (outside) 1 mask 172.30.4.1 - 172.30.4.2 255.255.255.252

  But from there I don't know how to restrict access to a single external IP on the web on port 80.

  Hello

  Enter the correct command to permit traffic and the same interface of leave is

  permit same-security-traffic intra-interface

  The command you posted allow traffic between 2 different interfaces that have the same value of 'security level'

  permit same-security-traffic inter-interface

  What about PAT Dynamics for Internet traffic

  If you have already

  Global 1 interface (outside)

  Then you will need the command "nat" for the VPN pool

  NAT (outside) 1 172.30.4.0 255.255.255.252

  In what concerns the control of Internet traffic, should not be able to simply add this destination IP address to the VPN filter ACL you have ever used? I mean the ACL named "l-admin-test-filter".

  For example

  L-admin-test-filter access list note allow the external server connection

  access-list l-admin-filter-test permit tcp 172.30.4.0 255.255.255.252 host eq 80

  access-list l-admin-filter-test permit tcp 172.30.4.0 255.255.255.252 host eq 443

  access-list l-admin-filter-test permit tcp 172.30.4.0 255.255.255.252 host eq 8080

  -Jouni

• Restrict authentication to an ad group only

  CISCO ACS 5.3

  The data store using external identity: AD

  Hi all

  Is it possible to lock a single ad group authentication?

  Authorization of access policies may be restricted to a group only, but I can't find a way to do with authentication. For example, anyone in AD can try to ssh or telnet to a network one have access to the non-privilege/level 1. I want to restrict it to "CISCO's Admins" group I already created

  Any help is appreciated

  John

  Hi JOhn,.

  This is not possible in the identity, you can only restrict access in the authorization, by choosing the attribute groups: external to customize advertising:

  Best regards:

  Mohammed (assign useful jobs)