Results in table.

Hi, I have a little problem. I want to fill a table with the results of a flat Structure of the sequence.

Sorry, I can't pass the code, but here's a screenshot.

I hope someone can help.

(I'm quite beginner.)

Hi touchko,.

You must use the following:

-Register to keep the table stored during several iterations to offset

-InitArray function to initialize the array to the desired size

-ReplaceArraySubset to put your values into the right position (index)

It's a shame you can't show your VI. The small party is not sufficient to provide more help than this...

Tags: NI Software

Similar Questions

FindGrep results in tables tables, depending on the object table of GOLD?

Hello
Currently, I get the text, I would like to consider using an index of PointInsertion from a previous search:
... . parent.insertionPoints.itemByRange (startPos, endPos)
Original research, as I did, I got a simple table, but the search inside the insertionPoints, I had an array of arrays.
Code example below. Just open a new blank document in InDesign and run the following. Adapted text is added in the code example, of research. (Tested in CS6 so far.)
```
var activeDocument = app.activeDocument;
var pg = activeDocument.pages[0];

var fr = pg.textFrames.add();
fr.geometricBounds = [20, 20, 100, 100];
fr.contents = 'a00sdf 12-9999\n15-888'

app.findGrepPreferences = app.changeGrepPreferences = null;
// Search for digits on a certain pattern
app.findGrepPreferences.findWhat = '\\d\\d-\\d\\d+';
var findings =activeDocument.findGrep(); // Searching the whole document

// The result is an array of Text objects
$.writeln('1. ' + findings[0].constructor.name);
// Result: Text


// Now search using an insertionPoint object instead. Search from the start (0) up to the position where we found the first match in the grep above.
var myTextObj = findings[0];
var insObj = myTextObj.parent.insertionPoints.itemByRange(0, myTextObj.index)
// Now just search for any two digits
app.findGrepPreferences.findWhat = '\\d\\d';
var innerFindings = insObj.findGrep(); // Searching inside the insertion points object

// The result is an Array of Arrays
$.writeln('2. ' + innerFindings[0].constructor.name);
// Result: Array

// ... inside which are the Text objects
$.writeln('3. ' + innerFindings[0][0].constructor.name);
// Result: Text

// ... so why did I get an array of arrays when searching inside the insertionPoints object?
```
Thank you
Andreas

Hi all

In any case, a range of text is a special beast compared to the results of.itemByRange (...) the regular Collection.

The fact is that myText. insertionPoints.itemByRange (0, myIndex) provides a collective PointInsertion (and it would be the same with the characters, wordsor any collection of text), but this text range instantly forced into an single text unit as soon as you access a property. Compare:

.pointSize de.stories.itemByRange (0, -1) myDoc(1); => Size chart

(2) myText. insertionPoints.everyItem () .pointSize; => Size chart

(3) myText.pointSize de.insertionPoints.itemByRange (0, -1); / /-online single size (even in the heterogeneous context)

Thus, text ranges are specially treated as text units, which leads to ask why myRange.findGrep () returns an array of arrays. IMO, the DOM is not in conformity on this point.

As shown in Peter, the workaround is easy. We just need to explicitly convert the beach in unity of the text reference is made, using either () myRange.getElements [0] or myRange.texts [0].

@+

Marc

the query results to table 2d
I have a list created dynamically IDs I want to query a table
for matching records for one of the IDs. I can run a loop of the list
the query, but what is the best way to put all of the matching records
each individual ID into a single statement of output? I question 7
different columns, so if I use a table it would need to be 2
dimensional and I do not know how to write the results of the query to a 2d
table. Or y at - it an easier way for the release of all data without
put in a picture at all?

Here is the corresponding code so far:

Change your code to the attachment to start (no loops!):

How to compare data from the two table column by column and connect the result compared to the separate table

Hello experts...
I'm new to this forum and Oracle coding complex.
I have a task in which I want to compare two tables with the same structure, same columns. My Oracle database is 11g Release 2. I want this column-by-column comparison and save the result in a separate table. (say result_table)
The structure of the table would be as follows:
SQL > desc emp;
Name                                      Null?    Type
----------------------------------------- -------- ----------------------------
EMPNO NOT NULL NUMBER 4
ENAME VARCHAR2 (10)
JOB                                                VARCHAR2(9)
MGR                                                NUMBER(4)
HIREDATE DATE
SAL                                                NUMBER(7,2)
COMM                                               NUMBER(7,2)
DEPTNO NUMBER (2)
SQL > emp_comp desc;
Name                                      Null?    Type
----------------------------------------- -------- ----------------------------
EMPNO NOT NULL NUMBER 4
ENAME VARCHAR2 (10)
JOB                                                VARCHAR2(9)
MGR                                                NUMBER(4)
HIREDATE DATE
SAL                                                NUMBER(7,2)
COMM                                               NUMBER(7,2)
DEPTNO NUMBER (2)
Both of the tables EMPNO is the primary key.
I want to compare these two tables based on the EMPNO (EMPNO even is both tables).
The result log table would be as follows:
SQL > create table result_table
2 (check_sr_no, number (5),)
table_name 3 varchar2 (30),
ROW_ID 4 varchar2 (20).
column_name 5 varchar2 (20).
6 column_data varchar2 (1000).
compared_by 7 varchar2 (10));
Table created.
SQL > alter table result_table
2 Add the constraint result_table_pk
3 primary key (check_sr_no);
Modified table.
The name of the table and the name of the column will not be hardcoded (based parameter by user)
I tried to use the dbms_comparison package, but do not find comparison of column to column.
I also used by using the query operator LESS. It's showing the difference in rank.
I also went to https://asktom.oracle.com/pls/apex/f?p=100:11:0:P11_QUESTION_ID:2151582681236
Your help will be very appreciated.
Thank you
DK

Tom Kyte has answered this question MANY times over the years. Here are links for its solution

https://asktom.Oracle.com/pls/Apex/f?p=100:11:0:P11_QUESTION_ID:4934799800346640847

join two tables and results to display checkboxes checked... loop david powers please?

Summary
two tables:
Table 1 categories
Table 2A categories that someone has selected
HTML form that updates the user's data:
form should show all the options in the category dynamically in table 1
and also to display the check box of the category as controlled dynamically if the person chose by table 2
The nuts and bolts
Attempt 1
My sql:
SELECT cat.id, cat.category, mcat.category as mcategory
THE CAT of categories, members_categories mcat
WHERE mcat.member_id = ' "." $_GET ['id']. »"
ORDER BY category ASC
(run on its own, all categories of table 1 are shown twice and the results of table 2 is a total cluster.)
area of the form with checkboxes:
<? PHP {? >}
< input <? PHP if (!) ((strcmp($row_rsCategories['mcategory'],$row_rsCategories['id'])))) {echo ' checked =------'checked\' ' ;}?} > name = "category []" type = "checkbox" value = "<?" PHP echo $row_rsCategories ['id'];? ">" / > <? PHP echo $row_rsCategories ['category'];? > < br / >
<? PHP} while ($row_rsCategories = mysql_fetch_assoc ($rsCategories));? >
what I have here results:
all categories displayed twice with selected categories of table 2 verified = by the results of sql when running alone
Attempt 2
My sql:
SELECT cat.id, cat.category, mcat.category as mcategory
CAT categories
LEFT JOIN members_categories mcat WE mcat.category = cat.id
WHERE mcat.member_id = ' "." $_GET ['id']. »"
ORDER BY category ASC
(run on its own, all categories of table 1 who have a match in the table 2 and none of the other in table 1 shows)
area of the form with checkboxes:
even the first attempt
what I have here results:
all categories selected in table 2 shows and checked, and no other choices of table 1 = by the results of sql when running alone
Attempt 3
My sql:
SELECT cat.id, cat.category, mcat.category as mcategory
THE CAT of categories, members_categories mcat
WHERE mcat.member_id = ' "." $_GET ['id']. »"
GROUP BY cat.id
ORDER BY category ASC
(running his own, all the choices in the category of table 1 are displayed, however, the mcategory column displays the lowest category numbered (same one) against all of these options rather then correspond to their.)
area of the form with checkboxes:
even the first attempt
what I have here results:
all choice of category in table 1 are displayed, however, only the first category in table 2 (which in this case is the lowest number) is marked as checked with the checkboxe, even if there is more then one category in table 2 = by the results of sql when running alone
so, can anyone help? I'm just banging my head against the wall here is something missing that should be obvious, because the sql is not giving me what I need to work with the form in a loop region. Perhaps another approach should be taken and I have change the loop as well, but I think that this can be resolved with the sql. Thanks in advance.

Well, you can use two separate sql queries...

one with the names of the categories

and the second nested with the loop that references the id of category in table 1 to pair with table 2

change of database for processing result

Hello everyone,

I have a question regarding the change of the use of the database for the processing of the result. My environment is 2014 Teststand, LabView 2014.

I need to be able to change the database used to store the result data programmatically. I use the simple example of the user interface provided by TestStand as a starting point to build the user interface. As I do this is by creating a global variable of station (StationGlobals.DBName) in the TestStand. The user can select its database via a combo box in the user interface. When users perform a sequence, Teststand asked to the user interface, the name of the database selected by the user (using UIMessage).

It does not work like I wanted. It is better described the symptom using the following use cases:

1. start the user interface

2. choose a database (DB - A)

3. run a sequence

4. check the result data tables in DB - A. This works.

5. choose another database (DB - B)

6. run the same sequence

7. check the result data tables in DB - B. They are not DB - B.

8. check the result data tables in DB - A. They are in DB - A.

It seems that the global variable of the station can be passed to the configuration database before you start to execute any order. The next event in the sequence, it does not take effect more.

I wonder if I need to change a reminder to operate correctly.

No idea why it behaves in this way? Here is a screenshot of my setup of database:

Thanks in advance for any pointer.

Yours,

chati

Hello Warren_Scott,

apparently in my case, when I change the database between runs, I can simply turn off the option "Share Data Link between executions" in the result of treatment-> database option and it will work. Thanks for your suggestions.

Yours,

chati

XML file - child nodes table

Just starting to learn more about XML.

I have a simple XML I created which is
```
Ambient


panel1


panel2


panel3
```
Using the XML property - child results node table of nodes in a table of 9 elements:
```
#text
Probe
#text
Probe
#text
Probe
#text
Probe
#text
```
My question is what are all the #text that are there? Should the child nodes be not just the probes?

It seems to me you may be heading down a dark path. Instead of using the "table of nodes child" and fighting through the unnecessary complications and text nodes, let me suggest you look at XPath and using "get all matched Nodes.vi ' or 'Get first match Node.vi' to get the items. XPath allows parsing XML child's play.

For example:

Of course, I hope that you use XP does not mean you use LV8.6 or earlier since the XPath screws are new to LV9.

If you use LV8.6 or earlier, I suggest looking in the .NET functions to implement XPath. Once you get the hang of it, it still beats the attempt to parse XML the old-fashioned way.

As for the editor, I generate very few XML files by hand, for the most part I bring other programs and analyse them in LV again, XPath adjusts the rough edges.

Intertwining of the tables on FPGA

Hello

I am trying to interleave 1 3 tables for writing a FIFO DMA on an FPGA, but I can't make it work properly. When I try 2 1 tables it of ok, but with 3 elements are not properly interlaced and the result is that all 1 3 bays are mixed up.

I tried to use the interleave with 3 entrances and gives the mixed result, and I also tried to striping and striping 2 tables then the 3rd in this table. It works better that at least I get 2 tables properly interlaced, but the 3rd one is missing. For the test I used 3 sine waves each of a different magnitude, but the same frequency, using the input function 3 the result is a sine wave in a sine wave. 2, interlacing and then the 3rd in this table are reflected in three waveforms good but table 2 and 3 are identical.

According to the help, it is possible to use the interleave on an FPGA at the entrance and the results are tables 1 d, which combines 3 1 the tables should be, I think...?

I tested the service in a standard vi and it worked fine so the question is of course to the fact it's on an FPGA, but this is because of the FIFO, the function interleave or something else?

The material is a 7856R if that makes a difference.

See you soon,.

Darren.

What SQL script to use to configure the default TestStand tables?

Hello

I'm setting up a small test application and want to record the results of the test to a SQL Server database. Page in preparation for the implementation of logging database mentions the scripts I use to set my database. In my case, I found 3 table creation scripts:
- SQL Server create insert generic result Tables.sql
- SQL Server create Recordset result generic Tables.sql
- SQL Server Create Tables.sql stored Proc result
What are the differences between them, and which one should I use?

Thank you!

In the options dialog of database--> go to the patterns tab and click on each of the options (generic recordset, insert generics, etc.). In the comments section, you will find the difference.

You can use one of them but to ensure that any script that you ran the DB tables same option is selected in the DB options.

I hope this helps.

Insert Table 1 d in table 1 d

Hello:

I have two indicators if table 1 d

I want to margin between these two table and get the final result of the 1 d array

Table 1

5

6

Table 2

7

8

9

I want to get the final result of table 1 d

5

6

7

8

9

can someone help

Thank you

Hello

You can use the function "buid array.

Your two tables on the 'build' of wire table, then right-click on the function "create array" and select "Concatenate".

It'll work like a charm!

Include the results in "Batch report" instead of "report USE".

Hi all

I modified the ProcessSetup TS 4.0 reminder to perform a test of the preliminary material before testing 8 DUT using batch processing model. Since this is a reminder, the results are not registered by default, so I store it in a global table of results. Then I copy this table of results into my results MainSequence table.

The problem is that this means that these preliminary results will be saved for UUT0 (if I use "A thread only" synchronization") or to the DUT (if I use the synchronization of batch processing model). How can I add my ProcessSetup test results to the "Results of the batch" section of the results page rather than the sections "USE results? The test checks the shared material and is thus applied to the DUT. I prefer not repeated it for each USE or make it look like, it applies only to WEAR it first.

Thank you

Chris

Tomahawk,

Al is correct that is whether you use HTML or ASCII report formats, you can override the ModifyReport... Reminders to get what you want. Unfortunately, with the XML declaration, you can use the ModifyReport... Reminders. In order to accomplish the functionality that you want to see everything and still use the report XML form, you will need to change the BatchReport reminder, as well as the XML style sheet you use.

TestStand 4.2, we have created tutorials and provided better material for our XML Style sheets. With a little effort, I am convinced that with TestStand 4.2, you would be able to reach your goal.

I suggest to take a look at customization of Style TestStand sheets of TestStand 4.2 help (available online). Unfortunately, Style XML TestStand 4.0 sheets do not have the same quality of literature as the TestStand 4.2 Style sheets, so you don't will not commented sections in the leaves of Style 4.0 as explained in the help.

For this particular case, you do not want to change the reminder of BatchReport to store the data that you want to place in your report batch section. Then, you change the section batch report of the Style XML with XPath map appropriate to display these data in the batch report.

The adjacent table values

What would the most effective way in labview to explore an array of 1 d 0 and 1 and store indexes side 1 is as a new line in a 2d array? For example, I have an array of 0 0 0 0 1 1 1 0 1 1 0, resulting 2d table will look like this:

4 5 6

8 9

where these numbers represent the index of the adjacent 1.

Help with this is appreciated.

A few problems.

Change your meter and line numbering of dual representation, I32 or another type of integer. This is probably why you stuck in a loop of the search for zero. Rounding errors in double can lead to inequalities between the numbers you might otherwise consider the same thing.

You have localitite. You have a condition of critical competition for the number of lines in the real case of the structure of the case. You want the number of rows, incremented by 1, or at the first 2 - D array index page? As it is now, there is no control over which no comes first. Eliminate all local variables. Replace them with wires and start using shift registers to manage values between iterations of the loop.

Another problem is your loop stops when your account equals the number of items in the table. Your count begins as zero. It seems that the number is incremented at each iteration of the loop. Finally, your account will equal the number of items in the table and the loop exits. But all the other codes in this iteration will still occur. If you have a table of 5 elements, your indices range from 0 to 4. But your account is now 5. The loop stops when the iteration has been completed, but now you are trying to index the element 5 (which doesn't exist) and also item 6 (5 + 1) that does not also exist. In fact, you will have the problem in the previous iteration because there is no element 5 (4 + 1).

Another problem is the way in which you are using insert into the table. If you start with an empty table and try to insert into a table in a different row or column outside 0, you get nothing. Or if you have 4 lines and you try to insert in line 5 or higher, nothing is added. Insertion in the table is the wrong function to use probably 95% of the time. You should use table to build.

Why do you have a business structure in the false case puts a real, and in the real deal puts a fake? It's a Rube Goldberg. It doesn't cause a problem, but it's just useless code. Just wire the comparison to stop and put on a NOT operator. If you change the status of the loop continues if it is true, you can eliminate the not! as well. In addition, rather than add a 1 to a number, there are a + 1 increment operator in the digital palette. (A little less code means a little cleaner diagram). In addition, you don't need two separate functions of the Index table. You can use one and resize it down. If wire you the County in the top, the bottom (that you just added in developing the service) will give you the index after counting.)

I don't have your global variable. (Where are the data coming from?) VI another?) If you can replace this world with a constant matrix with some typical data, it would give us something to work with.

Is it possible to find dependencies on the table given?

Let suppose I have a table named TABLE_TEMP. It is used in a TABLE_TEMP_V view, then the view is used by 2 methods (PR1_p, PR2_p) in the P1_PKG package, and one of these procedures (PR1_p) is used in another package (P2_PKG) by function (F1_f) and another procedure (PR3_p). I tried to use the deptree_fill utility, and then I had a sort of such result:
table TABLE_TEMP
view TABLE_TEMP_V
package P1_PKG body
package P2_PKG body
Problem is that the packages may have dozens of units and then I need to check manually, which of them really depends on the stuff I'm looking for.
What I get is:
table TABLE_TEMP
view TABLE_TEMP_V
proc P1_PKG.PR1_p
Func P2_PKG.F1_f
proc P2_PKG.PR3_p
proc P1_PKG.PR2_p
Is it possible to somehow?
Best regards
Maciej

Dependency object is maintained at the level of the stored object. The PACKAGE is a stored object. A procedure or function within a packet is not a stored object. Therefore, there is no easy way to get what you want.

Restore the Table Pagination

Hello
Is it possible to return to the table pagination, which means, instead of start page 1 with record 1, start at the last page showing the latest results of table?
If so, how can I do it?
I'm dependencies jdev 11 GR 1 material
Thank you

I was told that with paging, data are not noticeable, to remedy that I used scrol and presented to the last line at the end of the table.

Thank you all for your help

Data from table in XML data type

Hi friends,

I have data of type table, and I want that in XML to send through the web service.

could you please suggest any api available in Oracle 11 g (PLSQL) for this or any method to produce.

Help, please.

Kind regards

Tom

For example, if MY_FUNCTION() returns a MAJOR_LINE_TABLE_TYPE collection type, you can do something like this:

Select xmlserialize (document

XmlElement ("ROOT"

xmlagg (xmltype (t.object_value))

)

dash

) as a result

table (my_function ()) t;

It will generate a canonical XML document right out of the returned collection:

If this requires a minimum of effort, the drawback is that you don't have much control over the generated structure.

Optionally, apply an XSLT stylesheet to transform into the required shape.

The other option is to turn back the hierarchy of objects to relational data and use the SQL/XML functions to generate the XML content.

If you use these objects only in order to generate the XML, then you can also bypass it entirely and build the XML directly in the base tables, it will be much more effective.

Results in table.

Similar Questions

Maybe you are looking for