Resxtop with the capture of batch mode VMA 4.1 not opening not in performance monitor

Similar Questions

• Out of sync a station with the model of batch process?

  Hello

  My project has 5 test stations are run in parallel. I decide to use the batch process model because I want that they start and stop together. Next to startup and shutdown, I have some part in the need for synchronization of the entire test sequence. But in 5 stations, I want a workstation without flash sync to these steps. I tried to use the commands synchronize with the precondition, but it looks like that other stations are waiting for that one I jump the sync. My other option uses rendervous with number of parallel thread total is - 1. I test it and it works. But I still want to know if I can use batch synchronize step or not because it offers synchronization of start and exit synchronization.

  Thank you!

  NTT says:

  Doug,

  Thanks for your reply.

  I want to have something happening parallel with other threads, but without effect by steps of synchronization batch. I have several workstations parallel to the Assembly line. They are sync due to the pick and place. But I want to have a process is functioning as the station manager who keep track of USE between the train station and other site conditions such as pressure, temperature.

  Thang

  As a general rule, the intent of the TestSockets in the process templates is that they will have a 1 to 1 with DUT match, taking your 5th corresponds to an object to measure? In other y 5 DUT tested at the same time? DUT often need things like logging database or report generation. Your 5th decision-making requires the generation of reports? If not maybe this 5th Jack is really more than one thread of utility and creating a new thread or performance during execution makes sense for her. If your 5th instead making it really fits under test DUT in parallel enitrely separately from others the DUT then maybe you should start up a new run for the socket using the sequential model and just run as your other shots are running with the model of batch processing.

  So, it really depends on what you use this 5th station/thread to find out which method would probably work better.

  Hope this helps,

  -Doug

• What can I do with the database in offline mode

  What can I do with the database in offline mode?
  Other than for developers to understand the structure of database objects, what can I do with objects of database offline at development time.
  Is there anyway that I can refer to the tables defined in the database offline of EO, VO, even if the tables have not been defined in the database online?
  
  Thank you

  There are some useful articles and the doc on the Web:
  http://download.Oracle.com/docs/CD/E18941_01/tutorials/jdtut_11r2_81/jdtut_11r2_81_2.html
  and http://susanduncan.blogspot.com/2011/06/fine-tuning-your-logical-to-physical-db.html
  and a tutorial http://st-curriculum.oracle.com/obe/jdev/obe11jdev/ps1/databasedevelopment/obe_%20databasedevmt.htm

  Timo

• Operating system of the virtual machine attempted to activate the adapter Ethernet0 promiscuous mode. This is not allowed for security reasons.

  Hi all

  When I start my vm I get error

  "Operating system of the virtual machine attempted to activate the adapter Ethernet0 promiscuous mode. This is not allowed for security reasons. »

  I have been to this page http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 287

  From this page, on my webhost, I created a group called "vmware-vmnet0", then I add the user running vmware to this group.  I can give this rw on/dev/vmnet0 group permissions

  However, I still get the same error above on starting the virtual machine each time.  How can I solve this terrible problem.

  Thank you.

  Device nodes are re-created at boot time.  You can thank Linux udev.  To work around this problem, create the vmnet devices * with the ownership and the permissions you want under/lib/udev/devices.

• I used to have a box with the letters/folder called "All messages" - I do not have. Don't know what happened to her - I guess I could have deleted by accident? Can someone tell me how to get it back? Thank you

  I use the MAIL function on my MacBook Pro. I used to have a box with the letters/folder called "All messages" - I do not have. Don't know what happened to her - I guess I could have deleted by accident? Can someone tell me how to get it back? Thank you

  What do you mean 'all messages '? all mail entering, or email any or all all. ?

• error packaed and launch: Oh, Snap! Build request failed with the message: [ERROR] an archive or directory does not exist in the specified path:

  Hello

  I get this error when you try to run the sample of cards on the corrugation Simulator:

  Oh, Snap! Build request failed with the message: [ERROR] an archive or directory does not exist in the specified path: "/ Users/Calgacos/Library/Application Support/Google/Chrome/Default/Extensions/cnijnnaimeaacneklcndcafbnkeicckh/0.9.16_0/services/node/node_modules/rbd/Packaged/Maps.zip".

  The .../rbd/Packaged folder is writable and the Maps.zip will be created in the folder ~/RippleSites/Maps/Packaged.  With the help of Mac, the latest versions of everything.  The application runs in undulation ok, but I can't throw on the SIM BB10.

  Someone else have this error and know why?

  PS the Maps.zip does not get created (or copied) in specified folder, of course, but why?

  PS try another application and it worked but is too has not put its zip file into the folder... rbd/Packaged.  I guess it should not but leaves me clueless as to whats wrong with cards.

  Thank you

  The two directories (in the extensions directory and maps project directory) have permissions to 777.

  But you gave me an idea...

  It turns out that simply by putting

  "Packages".

  in setting output wasn't enough, I need the full path

  for example: "/ Users/username/RippleSites/Maps/packed."

  and presto, now it works!

  Thank you!

• I am unable to connect to the virtual pc Xp mode when I try to open a session given an error unable to connect to the domain that a domain controller is down or unavailable,

  I am unable to connect to the virtual pc Xp mode when I try to open a session given an error unable to connect to the domain that a domain controller is down or unavailable,

  Hi Rajendra Patil,

  I suggest you to ask your question on the TechNet Forums.

  Windows Virtual PC and XP Mode.

  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

  I hope this helps!

• I downloaded Adobe camera raw 8.4 so that I can open raw files with pictures taken with the camera Sony a6000.  However, it does not open images in camera raw.  What can I do?

  I downloaded Adobe camera raw 8.4 so that I can open raw files with pictures taken with the camera Sony a6000.  However, it does not open images in camera raw.  What can I do?

  I suggest you please update Camera Raw 9.1.1: Camera Raw of Adobe Photoshop CC and CS6 Installer

  Once done, launch Photoshop and click Help > about plug-in > Camera Raw.

  And check the version of Camera Raw, you see there, it should be the most recent.

• After I open a document using Adobe reader DC and want to save it with the help of Save as when I try to open this operation all I get is an empty windo saying save as. This problem just started, note I'm on Windows 7 Prof

  After I open a document using Adobe reader DC and want to save it with the help of Save as when I try to open this operation all I get is an empty windo saying save as. This problem just started, note I'm on Windows 7 Prof

  Hi sgodwin2468,

  Make sure that Acrobat Reader DC is updated Release Notes | Adobe Acrobat, Reader.

  If the problem persists, try the solution below.

  The default "save under" Acrobat/Reader DC dialog box is different from the dialogue box you had in earlier versions of Acrobat/Reader, it also allows you to record in the clouds and previous locations that you saved the files. It is possible that when Acrobat/Reader tries to connect to the 'cloud', it runs into problems. You can try to disable this feature to see if this brings your backup in the back of the box: open Acrobat Preferences, then go to the "General" category and uncheck "show the online storage when you save files:

  

  Kind regards

  Nicos

• InDesign cs6 still not compatible with the iMac 5K, his frustration that adobe is not fixing this issue! Perhaps a strategy to move to Adobe CC? I have urgent need to know how can I run the application correctly.

  InDesign cs6 still not compatible with the iMac 5K, his frustration that adobe is not fixing this issue! Perhaps a strategy to move to Adobe CC? I have urgent need to know how can I run the application correctly.

  It will never be updated for InDesign CS6. This has been discussed to death. Adobe updated the CS6 applications that she could update. Illustrator and Photoshop come to mind, so your conspiracy theory is incorrect.

  InDesign should be re-written from scratch due to the difference in the way it was designed.

  Your choice is to live with it or move to creative cloud.

• When I try to install adobe photoshop 13 on my computer it comes up with the error message error code "this installer does not setup on a windows 64-bit operating system support" 6. How to I recify this? TIA

  When I try to install adobe photoshop 13 on my computer it comes up with the error message error code "this installer does not setup on a windows 64-bit operating system support" 6. How to I recify this? TIA

  You can try to download the 64-bit version.  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

• A problem with the composite video display mode

  Hello!

  Since this morning, the composite video display mode of my sequences is black with a blue stripes dotted line.

  Each sequence is displayed with the same problem.

  Can you help me please?

  Lily.
  

  Hi Lily,

  Go to the file/project settings/general and change the rendering on "Mercury Playback Engine software only" engine.

  Press OK, you will get a dialog box in which you must select 'Remove Previews'.

  Try these steps and see if it works.

  Kind regards

  Navdeep Pandey

• Which cameras are compatible with the capture feature in adobe first pro?

  My son made videos of stop motion and wants to be able to use the capture feature on adobe first pro where you connect your camera via USB and can capture images on your computer through your camera. I am looking to buy him a camera and trying to find a list of digital cameras are compatible with this feature, it now has a small camera fuji who will not let him do.

  What other users have said is correct. First capture via FireWire or SDI/HDMI through a solution of part 3.

  For your situation, I would say the better is to connect the device to your computer via USB or use a card reader and copy the directory on your hard drive and interfere in first via media browser.

  If you Google "how to do stop motion in first pro" there are tons of tutorials.

  Best,

  Peter Garaway

  Adobe

  Premiere Pro

• IDCS5 JS: problem with the "captured" text lose formatting

  Hi all

  Excellent script from Peter Kahrel allows us to convert the notes in endnotes dynamic in IDCS5 after which, we use some of our own JS to enter this text, put it in an orange box and then delete the original text of notes. This works very well but have just realized that the formatting (italics) who was in the original notes text does not survive moved to the new text box. Italics is still protected by a character style.

  Our code;

  //searches for endnotes, puts them in a orange box and adds the "Endnotes" heading
  app.findGrepPreferences = null;
  app.changeGrepPreferences = null;
  app.findChangeGrepOptions.includeFootnotes = true;
  
  var myDoc = app.activeDocument
  var myPara = myDoc.paragraphStyles.item ("Endnotes");
  
  // Find the text & capture its contents to a variable
  app.findGrepPreferences.appliedParagraphStyle = "Endnotes"
  origText1 = app.activeDocument.findGrep (); 
  
  //check if any Endnotes are found, nothing happens if not
  if(origText1.length!=0)
  {
  newText1=origText1[0].contents;
  
  //adds new text frame on 1st page of doc
  var myTextFrame1 = myDoc.pages.item(0).textFrames.add();
  myTextFrame1.geometricBounds = ["6p", "6p", "36p", "36p"];
  
  // Apply the objectStyle to frame
  var myOStyle = myDoc.objectStyles.item("Endnote box");
  myTextFrame1.applyObjectStyle(myOStyle); 
  
  //add captured text to text box
  myTextFrame1.contents = ("Endnotes\r" + newText1);
  
  var myDelete = myDoc.paragraphStyles.add ({name: "Endnotes1", basedOn: myPara});
  
  // Loop to apply paragraph style to text
  var length = myTextFrame1.paragraphs.length
  
  for (var i =0; i<=length-1; i++ )
  {
  //apply para style to new frame contents
  var myStory = myTextFrame1.paragraphs[0].parentStory
  myStory.paragraphs[i].appliedParagraphStyle = "Endnotes1"
  }
  
  //removes original text
  app.findGrepPreferences.appliedParagraphStyle = "Endnotes"
  app.changeGrepPreferences.changeTo="";
  app.documents.item(0).changeGrep();
  
   // remove Endnotes1 paragraph style and replace with Endnotes style
  myDelete.remove (myPara)
  }
      
  else
  {
   }
  

  As you can see enter us the text to a variable using GREP and that place in a new box (preceded by a heading). Make us a copy of the para style 'notes', which allows you to style the copied text, remove any style with the original style (the original formulation) and then delete the new style replacing wiith the original style so that the copied text back to style 'notes' new para. I don't know there's a better way, but it works for what we want - at least I thought that this was the case.

  Any thoughts appreciated gratefully. I searched the forum but couldn't find anything relevant. What Miss me?

  Thank you

  Iain

  Why don't you just "move" the texts found for the box of endNote?

  I suggest the following approach (not tested, project code):

  function moveEndnotesInBox()
  //--------------------------------------
  // Searches for endnotes, puts them in a orange box and adds the "Endnotes" heading
  {
      // Preset findGrep
      // ---
      app.findGrepPreferences = null;
      app.findChangeGrepOptions.includeFootnotes = true;
      app.findGrepPreferences.appliedParagraphStyle = "Endnotes";
  
      // Find the text(s)
      // ---
      var doc = app.activeDocument,
          foundTexts = doc.findGrep(),
          i = foundTexts.length;
  
      // If no 'Endnotes' text is found, return
      // ---
      if( !i ){ alert("No endnote found"); return; }
  
      // Creates a new text frame on 1st page w/ specific
      // bounds, and preset contents
      // ---
      var tf = doc.pages[0].textFrames.add(
          {
          geometricBounds: ['6p', '6p', '36p', '36p'],
          contents: "Endnotes\r"
          });
  
      // Preset obj and parag. style
      // ---
      tf.appliedObjectStyle = doc.objectStyles.itemByName("Endnote box");
      tf.parentStory.paragraphs.everyItem().appliedParagraphStyle = "Endnotes";
  
      // Backup the last insertion point index
      // ---
      var    ips = tf.parentStory.insertionPoints,
          ipx = ips.length - 1;
  
      // Loop through foundTexts and move texts to tf
      // (IMPORTANT: from the last to the first item to preserve Text indices)
      // ---
      while( i-- )
          {
          foundTexts[i].move(LocationOptions.AFTER, ips[ipx]);
          }
  }
  
  moveEndnotesInBox();
  

  Of course you must still deal with the possible lack of returns of paragraph or 'ghost' reference markers. I do not exactly know the context, but it seems not complicated.

  Hope that helps.

  @+

  Marc

• Problems with the capture of HDC TM700

  Someone can help me. I have Windows 7, 64-bit

  CS5 Prem Pro system. Get a device of capture in offline mode when you try to

  captures from TM700 (PAL) HDC. Panasonic assures me that it will not work on a 64 bit system, but

  I have read other forums telling me that it is rubbish. Tried to set up the remote control, using the

  vice in standard type. When I'm Laura a panasonic support person what the devi

  type this to use was "Camcorder" I, (and all this time I thought it was a brick house!).

  What should I do now?

  Colin gave you a lot of good advice already, but here is a link for more information regarding ingestion of file-based cameras:

  "Import of assets from tapeless formats.