Retention time of journal ACS

Similar Questions

• HOWTO estimate size of the restoration for flash area given retention time?

  Hello
  
  Well, the question is in the topic... Is there a method to give a same rough estimate of the size of storage needed for an undo retention time given?
  
  Of course, in view of the fact that I have a rough idea of the size of the database at a given time and its evolution of the size.

  user8768362 wrote:
  Hello

  Well, the question is in the topic... Is there a method to give a same rough estimate of the size of storage needed for an undo retention time given?

  Of course, in view of the fact that I have a rough idea of the size of the database at a given time and its evolution of the size.

  I have 47not sure that I have not your question. FRA is based on the size of the database and is usually recommended for twice the size of the db. Whereas the Undo data is stored in the Undo tablespace and here, the calculation of retention Undo is needed to correctly calculate the size of the storage space. To do this, leave, 10 g, there are avilaable Cancel Advisor who can help you in the calculation of the appropriate size. Once again, what is your condition and db version?

  HTH
  Aman...

• OSB writing windows and hold set volume (retention time)

  Hello, all the

  When I do a secure backup media family, can set the time keep managed defined volume and write windows.

  I know the other provider backup software also has retension configurations.

  ex) case Symantec Veritas

  If I do a policy with 1 weeks retenstion, backup image of the same strategy can be reached by writing to the media and can be added.

  And, if a media has a full capacity backup looking for other media software.

  Poliy retention check backup image media and decide expired (recycle) date according to the last backup image.

  01/04/2014 backup complete (retention 1weeks) by using the new media (TEST01)

  02/04/2014 full backup (retention 1weeks) using existing media (TEST01) add

  03/04/2014 full backup (retention 1weeks) using existing media (TEST01) append and full media.

  Expried of TES01 media date is 2014/04/10 because of the latest backup image.

  ex) case Secure Backup

  If I do a media with 7days family write time windows and successful 10days keep set of volumes.

  01/04/2014 backup complete by using new media failmily (TEST01)

  02/04/2014 full backup using existing media (TEST01) add

  03/04/2014 backup help existing media (TEST01) append and full media.

  When can I use this new medium and what is the exactly date expired media?

  I want to know how to write windows (is it not editable 59(1)(c)?) and hold volume set (is this true retenstion?) meaning...

  Thank you very much advanced.

  The retention period starts as soon as the write window closes, it does not matter if the Ribbon is completed, the entry window remains the same, so band closes on that date. You can do a 'obtool lsvol-l' on tape and see when it will close and when it will expire:

  obtool lsvol-l b ADC00003

  Volume OID: 29091

  Volume ID: FullBackups-002467

  Bar code: ADC00003

  Sequence of volume: 2

  Family support: FullBackups

  Created: 2014/02/18.04:01

  Deadline: 2014/03/18.04:01 (closed)

  Expires: 2014/06/18.04:01

  Remaining space: no

  The original OID: 29091

  If you want a backup must be kept for exactly 14 days then your window writing + retention must equal to 14, so it could be 7 + 7. 13 + 1 is also very good, assuming that you do not send the tapes out of the library, and which will also ensure your tapes are used to their ability.

  Thank you

  Rich

• Can we change primary standby Undo retention time

  We set up a standby DB,.

  can we undo retention target reduce the primary standby

  What are the things to consider before.

  hope because it is a watch - what is the significance of the undo retention target

  Yes. Retention of cancellation can be reduced. The wait has no active SELECT statements (unless it is Active Data Guard, where you READ ONLY in managed recovery mode), so that consistent readings are reduced to a minimum on the day before. In addition, the phase to apply is often faster that it again is committed to primary school because there is no request pending on a user to press the "Save" button. Repeatedly, the cancellation must not be kept longer on the day before.

  That being said, why change this setting on the eve? If it is set to match the primary school, there is no problem. And if you need to switchover to the standby, a lower undo retention can cause problems with the application.

  See you soon,.
  Brian

• retention time

  Does anyone know how long our questions (and the answers we received) stay on the Adobe Forum?

  I posted something about 2 weeks ago and it seems to be deleted (as well as useful responses).

  Indefinitely for now.

  It can scroll on the first page due to new positions, but you can get to it from your file validation, or with a search.

• ACS high availability deployment: collector's journal can cause AAA functions?

  Hello

  I've been watching the ACS installation guide, section of deployment:

  http://www.Cisco.com/c/en/us/TD/docs/net_mgmt/cisco_secure_access_contro...

  Question:

  Is it possible for one of the cases to be the journal ACS collector? Or need a dedicated server for the collection of journal only?

  Thank you

  Mario

  It doesn't have to be a dedicated server. By default, the primary server will also be the collector of newspaper.

• Is it possible to set the time on a device in real time so that the time will persist when the device is not powered?

  It seems that you can not set the time on a device sbRIO (9606) and have always the exact time when the card is powered after not being fed for a while.  I have a product which will be independent (not connected to a network) when it is supplied by the customer.  I would like to collect data in a datalog and would like to put a timestamp somewhere so that I can understand when these data were collected.  If I can't get an exact date/time, then the next best solution would be to set up my datalogs so that I can at least understand the exact order in which they were collected.  (I think I can understand it without much problem)    Any suggestions as to best practices?

  Hey John,

  Without connected VBat time will not be preserved between periods of closure. Unfortunately for the 9605 and 9606 we have not a way to date the connector 9693 VBat.

  How much sbRIOs you plan to deploy with your system?  9623 and 9626 have a compartment for the RTC. If you haven't bought your sbRIOs already you could focus on the options of the form always match.

  If it is necessary to have retention time between stops, we would need to understand the extent of your application more.

• Connection 12:00 ACS DNS configuration does not resolve the address

  Hello

  I'm trying to configure the ACS with AD in the identity store but spin the question.

  I enter the AD domain name and the user name and the password and click on the button "Test connection" and receive a DNS error indicating that he "cannot resolve network address.

  I connected to the CLI and test from there domain name and it works very well.

  I am confused any help would be grateful.

  Thank you.

  Hi André,.

  In the configuration of Active Directory, make sure that you have entered the full domain name. With this access to the ACS through SSH connection and make sure the time zone and the time the GBA and the AD is the same thing and make sure that the ntp server are configured on the CLI of ACS.

  Here are the steps to do:

  Step 1: Set the time on the ACS corresponding to AD. Type the command "clock {game} [month day hh:min:ss yyyy]."

  Step 2: Configure the time zone. Type the command in the configuration mode ' clock timezone (timezone).

  Step 3: Configure the ntp server. Type "ntp server (address IP/hostname).

  Kind regards

  Kush

• THE ISSUE WITH ACS REMOTE AGENT LOG

  Hello guys,.

  I installed a Cisco ACS SE with version 3.3. I try to configure for sendo journal acs agent remotely, but it does not work. I installed acs remote agent and I activated the registration service during the installation. ACS appliance may communicate with the remote agent, but ACS cannot write logs on the Remote Agent. If I look at logg on ACS its OK, but when I look at the logs on the Remote Agent Windows there is nothing there. Could someone help me?

  Thank you

  Hello

  Please try logging configuration remotely as shown in the link:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/3.3/user/guide/r.html#wp952633

  Kind regards

  Anisha

  P.S.: ACS 3.3 is out of life and support. Please install the latest version.

• ACS 5.0 - WLC could not authenticate

  Salvation of the Forumers

  My script is

  1 using the microsoft AD running on window 2008, use ad server to perform authentication of identity

  2. I let successfully the ACS 5.0 device link and join the domain created on the AD server.

  3. I have also set up on WLC 2100 series with the right key on pre-shared, server IP RADIUS (which is my ACS appliance IP)

  Problem statement:

  1. try to access the network Journal ACS showing the error log 'Unknow CA, a no authentication'. (I know I'm missing to place certificate for EAP protocol somehow...)

  Question:

  1. to solve this problem, I can generate self-signed certificate ACS, then let the WLC import the certificate self-signed GBA?

  (so EAPoW challenge can happen as ACS and WLC are reciprocal trust, which, in my view, ACS simply use the user of the AD, so in this cse ACS database is the authentication server and WLC is the authenticator and my AP / user's begging him, am I rite?)

  can I not like it? Appreciate all feedback and response!

  2. If we are not my thought, can you please suggest me a solution (my requirement, it is not using any third party trusted agent certificate)

  Thank you

  Noel

  Hi Noel,

  If I can update your list, the components must be the following:

  -ACS authentication server =

  -WLC = authenticator

  -wireless client = client

  Use of certificates for EAP authentication between client wireless and ACS (devices performing the EAP authentication): the WLC check all ACS certificate.

  You can certainly create a self-signed certificate on ACS for PEAP for example working.

  On the client, you must then either not to validate a server certificate or to import GBA self-signed certificate as a CA certificate root to trust the self-signed certificate ACS itself when sent by ACS during the configuration of the PEAP TLS tunnel.

  One final note, for WLC working with ACS 5.0, please make sure you are on the patch
  5.0.0.21.6 or later

  http://www.Cisco.com/cgi-bin/tablebuild.pl/acs5_patches

  in order to avoid the known bug CSCsy17858

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsy17858

  Kind regards

  Fede

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• NEED EXAMPLE AD INTEGRATION CONFIGURATION ON ACS 3.3, 5.3

  Hello

  Please give example of associated RADIUS in Windows server 2003 Active directory configuration.

  The same way need step by step configuration AD GBA.

  Please help on this. I searched a lot but do not receive the correct docs who say these two things.

  I need to configure end users (without thread or L3 device)--> ACS--> LDAP for authentication

  Kind regards

  Santana

  Before you integrate ACS 5.x to the announcement, make sure that the time zone, Date & time on the ACS matches that on the AD PDC. Also, set the DNS on the ACS server to be able to resolve the domain name of the ACS 5.x. complete these steps to configure ACS Application Deployment Engine (ADE-OS) 5.x:

  Please follow the link for step by step configurations below because it is not possible to paste here complete as follows:

  http://www.Cisco.com/en/us/products/ps9911/products_configuration_example09186a0080bc6506.shtml

• URGENT: Need to flashback table, how to find SNA for quite some time before the update that's happened?

  Hi all

  I have a new database 11G, I haven't used before flashback, but my retention time is a day... I have once the developer did a massive update to a table to corrupt.

  How can I find the RCS for this time so I can try this table of flashback?

  Thank you

  Cayenne

  Thank you.. I also found that it works:

  SQL > select timestamp_to_scn (to_timestamp('20140103152000','YYYYMMDDHH24MISS')) SNA double;

  SNA

  ----------

  98344246

  Although does NOT work all the time. But that's just what Oracle when you give him a timestamp to flashback to: it converts the timestamp of a SNA and then restores the data based on the SNA.

  See table of Flashback in the language SQL doc

  http://docs.Oracle.com/CD/B28359_01/server.111/b28286/statements_9012.htm

  TIMESTAMP CLAUSE

  Specify a value of timestamp corresponding to the point in time to which you want to return to the table. The expr must evaluate to a valid time stamp in the past. The table will flash back to a period of about 3 seconds to the specified timestamp.

  This precision "3 seconds" is because of this conversion to SNA - Oracle uses its internal table.

  YVERT is accurate, if you know, but you typically do not have.

  Read and consider these warnings in app dev guide advanced

  http://docs.Oracle.com/CD/B28359_01/AppDev.111/b28424/adfns_flashback.htm

  Guidelines for Oracle Flashback Query

  • If a potential error of 3 seconds (maximum) is important for Oracle Flashback Query in your application, use a SNA instead of a timestamp. See guidelines on Oracle Flashback technology.

  . . .

  General guidelines for Oracle Flashback Table

  . . .

  • For querying the latest data at a specific time, use a SNA. If you use a timestamp, questioned real time can be up to 3 seconds before the time you specify. Oracle database uses the SNA and assigns them to the timestamps to a granularity of 3 seconds.

  For example, suppose values SNA 1000 and 1005 are mapped on the timestamps 08:41 and 08:46, respectively. A query for a moment between 08:41 and 08:45:59 is mapped to the SCN 1000; an Oracle Flashback Query at 08:46 is mapped to the SNA 1005.

  By reason of this time-to-SNA map, if you specify a time slightly after a DDL (such as a table creation) Oracle database operation can use a SNA which is located just before the DDL operation, causing the error ORA-1466.

  . . .

• How can I block spam emails.

  I want to send spam emails directly in the trash. It seems that there is an option to tag as junk and then send all unwanted mail messages in the trash. The problem is that I scored a lot of spam email that I might want to read maybe 5% of them. How can I cancel all unwanted mail settings and start over again, so I can mark spam emails that I never want to read as spam.

  Why do you not use the Junk folder (or Spam) to move the messages classified as junk to.
  You can define a retention time so that you can still read the messages you want and are looking for false positives.
  http://KB.mozillazine.org/Junk_Mail_Controls

• How long are icloud videos stored on the iphone?

  I have photo library enabled on my iPhone6 iCloud.  More photos and videos are removed from the device, but more recent photos and videos of sticking around for a while.  I wonder what is the retention time window.  I have a bunch of videos of the phone too.  I know that they have been transferred to iCloud, and so I'm waiting for copies of the device to disappear to make room.  What is the retention period?  2 weeks?

  Nothing is ever deleted with iCloud photo library. You think maybe on the photo stream, but that includes no video and don't keep anything in the cloud, like 30 days.

• Office 365

  My company has implement Office 365 and we were told the retention time of the default folders is 60 days, but we could create subfolders.

  Subfolders will be assigned the retention time of our archives file which is 6 months.

  I moved e-mails to a subfolder when e-mails reached the 60th day.   The emails have been deleted.

  Question when a message is moved from the Inbox to a subfolder how Outlook to mark the post to know that it has been moved?

  1Eugenius

  I post this question Office 365 here Forum:
  http://community.office365.com/en-us/f/default.aspx