Retrieve data

On our mac desktop browsing history has been authorized by a third party in the last 24 hours, and we need to get it back. The version of Firefox is 35.01.1. How can we achieve this? Thank you

Hello, in firefox itself there any precautions that would cancel the clearing of the history. If you do not have a backup of your profile from another source folder, I fear that no luck, you will be...

Tags: Firefox

Similar Questions

Retrieve data after a certain line

Hi guys,.

Any advice or assistance would be appreciated

Question: How do I retrieve data after a certain line of a string of delimited by commas that are read from a port series?

More info: to have a map which includes data values and can be read in the computer via a serial port. Example of a string of acquired data as below:

Data = 1 bit/s = sensor tool
; Label, time, voltage, pressure, temperature, current
A, 01:33, 5.1, 18.1, 31.2, -.
B, 01:34, 5.5, 19.2, 30.5, -.
Data = 1 bit/s = sensor tool
; Label, time, voltage, pressure, temperature, current
A, 01:35, 5.3, 18.3, 30.1, -.
B, 01:36, 5.1, 19.0, 30.5, -.

Data = 1 bit/s = sensor tool
; Label, time, voltage, pressure, temperature, current
A, 01:37, 5.1, 18.1, 30.8, -.
B, 01:38, 5.3, 19.2, 30.1, -.

The value of these data is kept up-to-date line by line. I would like to start to extract data only on the 3rd block of incoming data. I would not that the first 2 blocks incoming data.

More info: currently, my idea to do this is to analyse the '; '. data"and put it in a counter. If there are 2 '; data' scanner, then woud counter set to True in a case to start structure to extract the output data. Please see my attached picture.

However, I'm not able to create also a counter using a table that I can't use a while loop and register shift. You have an idea? Thank you very much.

Hi pokerprof,

If you plan to get the data individually, have you tried the following:

Put the output of the select.vi (where it is used as part of the counter) to a comparison so that when we tell: counter-online 3, begin to extract.

Alternatively, you can use the below:

The number of iterations that you plan to run? My concern would be the overflow of integer of the meter (http://en.wikipedia.org/wiki/Integer_overflow).

You can try like vi, illustrated by johnsold (if you get all the data in a single iteration).

Thank you

Warm greetings,

Lennard.C

mobile phone - retrieve data

How can I retrieve data from my DEAD PHONE so that I can install it on my new phone. the old man is NOT a smartphone, but it is currently connected to my computer via USB

Hello

I suggest that you contact the Support Section of the manufacturer of the Mobile phone and ask for their help to recover the data from their phone 'dead '.

See you soon.

Retrieve data from AddressBook for Webworks Smartphone

Hi all
I want to implement the address book API. Where can I get/retrieve data (phone number, address of E-mail etc) for my Application project.
Is it possible to invoke the address book to recover data?

I go through this link, but it did not help me https://developer.blackberry.com/html5/apis/blackberry.invoke.addressbookarguments.html#view

I have searched several times but could not get a code to make it possible.
Please help me if someone know the solution or have any sample code.

Thank you best regards &,.
Castillo

Its seems quite surprising that no member of this forum suggests even a single code related to this problem...

However, I still have more research and find the alternative.
```
var contactResult = new Array();

var Fname = new blackberry.find.FilterExpression("firstName", "!=", "");

    contactResult = blackberry.pim.Contact.find(Fname);
    for ( var i = 0; i < contactResult.length; i++) {
        var totalName = contactResult[i].title+ " "+ contactResult[i].firstName+ " "+ contactResult[i].lastName;
        }
```
This will retrieve all data or contacts from the address book. For which I have to do a custom address book.

create the http client to retrieve data from web service

Hello

I am newbie on our webworks. I need to retrieve data from web service. How to connect to this service and analyzed. There is a tutorial that can help me get started with it.

Can any one advice me how can I start working with webworks on blackberry 10

Thanks for any help

In general, you will need to use an AJAX call to the server

It really depends on what the server returns as to how the information is easy to digest

JQuery provides a simple interface, and returns information easy to use

If you deal with things gets complicated XML according to namespace

If you look at the raw XML data and it goes something like fred: name you will have questions requiring an implementation of SAX - JSON is simple if you don't get that even if (nothing too confusing here)

If using an external data source JSON go if you have the choice

As examples go - just look to the top of JQuery Ajax [JSON / XML] and you will get where you're going quickly

SAX is MUCH harder because of the namespace - Dublin is the most common and same XML without namespace is not simple to handle, so avoid it if you can

to retrieve data from xml data type

Hello...
I have a doubt in the oracle database... Here's how to retrieve data from xml data type?

Like this...

SQL> ed
Wrote file afiedt.buf

  1  with t as (select xmltype('
  2  
  3    
  4      toMonth5
  5      ctTestPan1
  6      costType2
  7      toYear2012
  8      fromMonth12
  9      fromYear2011
 10    
 11  ') as xml from dual)
 12  --
 13  -- end of sample XMLDATA, use below query on your own table etc. as required
 14  --
 15  select x.*
 16  from   t
 17        ,xmltable('/DETAILS/FIELDS_VALUES/FIELD'
 18                  passing t.xml
 19                  columns name varchar2(30) path './NAME'
 20                         ,val  varchar2(10) path './VALUE'
 21*                ) x
SQL> /

NAME                           VAL
------------------------------ ----------
toMonth                        5
ctTestPan                      1
costType                       2
toYear                         2012
fromMonth                      12
fromYear                       2011

6 rows selected.

Get a delta.vmdk to retrieve data

Hi all
I'm looking for a way to recover data on a delta.vmdk file I have. Basically what happened last week, it's a virtual machine has whipped out and I had to restore some files I had saved manually. I had all the shots or delta.vmdk files, but I was able to restore the data on the file - flat.vmdk. I finished due to lack of 20gigs of data, but I have the delta.vmdk file (_{20 GB) that I want to retrieve data from. I also have the most recent snapshot file manually before the disaster. What I read, there is a way to create a new virtual machine, the Assembly of the delta.vmdk (}20 GB) as a new hard drive and then just manually copy files and folders off the power. How can I accomplish this?
Thank you!!

Well it seems that you are missing two snapshots of the chain. However, I have prepared the attached template for the snapshot file because it is missing (at least you haven't added it in the zip file).

Add the file descriptor to the file of the virtual machine, and then create a clone of the disc

The command to clone the drive is like:

vmkfstools-i /vmfs/volumes/old_datastore/vmdir/vm-00003.vmdk /vmfs/volumes/new_datastore/recover/vm-clone.vmdk

BTW: Have you tried different things with the VM already? The virtual machine refers to a ' ps - delta.vmdk "as the file to HARD drive?

André

Ref: http://kb.vmware.com/kb/1007849

With the help of the socket object to retrieve data from web application without the html files

I tried to use the socket object to retrieve data from a web application (I just control script version vs version online). So all I want to do is access http://hyle.io/version that returns me the current version of the application (such as a simple string) in order to compare it in my script and then notifies the user accordingly. I have just a few problems using the socket object. I used this code from the Adobe Javascript Tools Guide:
```
reply = "";
conn = new Socket;
// access Adobe’s home page
if (conn.open ("www.adobe.com:80")) {
// send a HTTP GET request
conn.write ("GET /index.html HTTP/1.0\n\n");
// and read the server’s reply
reply = conn.read(999999);
conn.close();
}
```
... that I then adapted as:
```
reply = "";
conn = new Socket;
if (conn.open ("hyle.io:80")) {
  conn.write ("GET /version HTTP/1.0\n\n");
  reply = conn.read(999999); 
  conn.close();
}
```
And here is what I get:
```
HTTP/1.1 400 Bad Request
Content-Length: 225
Content-Type: text/html
Server: Pagodabox-Routing-Mesh

Bad Request
Your browser sent a request that this server could not understand.
Résultat : true
```
I don't know a lot about HTTP requests, but I wondered if it was related to the fact that I am not pointing to a specific HTML file and the type of request was wrong or if I should rather check if there is something wrong with my host?
The site/app is PHP and is hosted on PagodaBox if it helps.
Thanks in advance!

Hi Sebastien Lavoie,

It should work

var HTTPFile = function (url, port) {}

If (arguments.length == 1) {}

URL = arguments [0];

port = 80;

};

This.url = url;

This.port = port;

this.httpPrefix = this.url.match(/http:\/\//);

This.Domain = this.httpPrefix is nothing? This.URL.Split("/") [0] + ":" + this.port: this .url .split ("/") [2] +":" + this.port;

This.Call = ' GET ' + (this.httpPrefix == null? ' "). " http://" (+ this.url: this.url) + "HTTP/1.0\r\nHost: ' + (this.httpPrefix is nothing? "This.URL.Split("/ ") [0]: this .url .split (" / ") [2]) +" \r\nConnection: close\r\n\r\n ";

This.Reply = new String();

This.Conn = new Socket();

This.Conn.Encoding = "binary";

HTTPFile.prototype.getFile = {function (f)}

var typeMatch = this.url.match(/(\.) (\w{3,4}\b)/g);

If (this.conn.open (this.domain, "binary")) {}

This.Conn.Write (this.) Call);

This.Reply = this.conn.read (9999999999);

This.Conn.Close ();

} else {}

This.Reply = "";

}

(Return this.reply.substr(this.reply.indexOf("\r\n\r\n")+4);

};

}

Hyle var = new HTTPFile ("http://hyle.io/version");

Alert (hyle. GetFile());

And by the way, I like the idea of 'http://hyle.io'. Can you give me your email address, I want to learn more about this Web site.

Please send me an email to [email protected]

Flex 4.5 allows multiple components of the page retrieve data in parallel?

There are frameworks that allow several components of the page to go in parallel with multi threading. Framework of the new Flex 4.5 allows that several components of the page retrieve data in parallel? Because I think that there is no other framework that allows that several components of the page retrieve data in parallel.
Needs of light on it. Thank you.

If you mean, it allows you to perform several Web service calls at the same time (asynchronous), then the answer is Yes. If you need complete a component that is located on another page before the user this page is displayed, you can use this:
creationPolicy = "all" create the component before the user saw, so that you can use these components programmatically.

SQL Query to retrieve data in XML format with several levels

Hello

I'm looking to help generate XML from Oracle database. The request must contain many levels of sub...

For example.
Create table inventory
(Group varchar2 (10))
category varchar2 (10),
ProductName varchar2 (10),
Detail varchar2 (10));

The output should be also present below. The data must be multiple values for each item.

< inventory >
< name of group 'auto' = >
< category name 'cars' = >
< name productname = 'Seat' >
< details > red color < / details >
< details > 5 seats < / details >
< / productname >
< / category >
< / Group >
< / inventory >

Please share your ideas by retrieving data in the XML structure using SQL or PL/SQL for oracle 10 g.

Thank you and best regards,
Siva.

This?

SQL> create table t as
with t as (
 select 'automobiles' "GROUP", 'cars' category, 'seat' productname, 'color red' details from dual union all
 select 'automobiles', 'cars', 'seat', '5 seats' from dual union all
 select 'automobiles', 'cars', 'make', 'ford' from dual union all
 select 'automobiles', 'cars', 'make', 'Toyota' from dual union all
 select 'automobiles', 'Bus', 'Model', 'volvo' from dual union all
 select 'automobiles', 'flight', 'Airbus', '400 passenger' from dual union all
 select 'automobiles', 'flight', 'Airbus', '500 mph' from dual union all
 select 'HealthCare', 'Nutrition', 'centrum', 'Organic' from dual union all
 select 'HealthCare', 'Nutrition', 'centrum', 'Chemical' from dual union all
 select 'Computers', 'Software', 'Database', 'Oracle' from dual union all
 select 'Computers', 'Software', 'Database', 'sqlserver' from dual
)
select * from t
/
Createtable successfully completed.

SQL> select xmlserialize (content x.column_value indent) xml
  from xmltable('element Inventory
                 {for $g in distinct-values(ora:view("t")/ROW/GROUP)
                   return element group
                      {attribute name {$g},
                        for $c in distinct-values(ora:view("t")/ROW[GROUP=$g]/CATEGORY)
                          return element category {attribute name {$c},
                            for $p in distinct-values(ora:view("t")/ROW[GROUP=$g and CATEGORY=$c]/PRODUCTNAME)
                              return element productname {attribute name {$p},
                                for $d in distinct-values(ora:view("t")/ROW[GROUP=$g and CATEGORY=$c and PRODUCTNAME=$p]/DETAILS)
                                  return element details {$d}
                                                         }
                                                  }
                      }
                 }') x
/
XML
--------------------------------------------------------------------------------

  
    
      
        Oracle
        sqlserver
      
    
  
  
    
      
        Chemical
        Organic
      
    
  
  
    
      
        volvo
      
    
    
      
        Toyota
        ford
      
      
        5 seats
        color red
      
    
    
      
        400 passenger
        500 mph
      
    
  
                                                                    

1 row selected.

retrieve data from staging account
Hello

does anyone know how we can retrieve data from staging of account using 'Segmentation Wizard', "report analysis tool", model of fusion and mailing, etc.?

Seems that these tools connect only to the production instance...

Thanks, Sab
SAB,

for segmentation Wizard (and perhaps other office files), you will have to go file - properties - Custom and update the values for the name of pod, if you have a job you know what value it is as I am not "have a practice to watch.

see you soon
Alex

Retrieve data from a Web site by running a python script to help schedule a task

I'm under Calendar (task name - extracted) to retrieve the data every 5 minutes of a wesbsite of transport to verify respect of accidents by running a python file (incident.py) and back into a json (incident.json) file.

When I tried to run the task on the calendar, the json file did not appear.

Codes to print the result to a json file:

#Parse JSON to print
jsonObj = json.loads (content)
print json.dumps (jsonObj, indent = 4, sort_keys = True)

#Save result to file
with open ("c:/Incident.json", "w") as outfile: #Saving jsonObj ["d"]
JSON.dump (jsonObj, outfile, sort_keys = True, indent = 4, ensure_ascii = False)
Python - JSON file (result) incident.py - incident.json

Can anyone help?

This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil

http://social.msdn.Microsoft.com/Forum

If you give us a link to the new thread we can point to some resources it

Retrieve data from xml file

Hello

Consider, having more xml file

How can I retrieve the value of the key to lonlat "36.76,3.05."

in my qml file, I had something like

...
        Page {
            id: ch_loc
            Container {

                //background: Color.White
                ListView {
                    dataModel: XmlDataModel {
                        source: "LonLat.xml"
                    }
                    listItemComponents: [
                        ListItemComponent {
                        }
                    ]
                    onTriggered: {
                        //qDebug(indexPath[3]);
                        app.initiateRequest(dataModel.data(indexPath[0]))
                    }
                }
            }
        }
...

I'm on the right track? Need help please.

Thank you, best regards.

Maddin

Hello

OK after some reading, I thought about it.

What I did:

Page {
            id: ch_loc
            Container {

                //background: Color.White
                ListView {
                    dataModel: XmlDataModel {
                        source: "LonLat.xml"
                    }
                    listItemComponents: [
                        ListItemComponent {
                        }
                    ]
                    onTriggered: {
                        var selectedItem = dataModel.data(indexPath);
                        app.initiateRequest(selectedItem.value);
                    }
                }
            }
        }

Please don't quite understand. IAM does not ask for help without doing anything by myself. IAM at this new and iam from difficult to understand the whole material. For now iam happy that I understood this part.

If this is done for me.

Concerning

Maddin

How to store/retrieve 'Date' using persistent data?

Hello everyone - this is my first post on the BlackBerry Support Forums. I'm trying to provide a lot of relevant information as possible, but if I miss anytihng or I did not understand by asking what I want, please let me know.

Background:

I use Eclipse IDE ver 3.5.0 and BlackBerry Java plug-in for Eclipse 1.1. I build my application for BlackBerry JRE 5.0.0.

Question:

I want to save a "Date" field for persistent data so that I can recover and display in the format of Date once again (no chain). Here's a more detailed explanation.

My application has three fields on the main screen. They are

'Name' - AutoTextEditField

"Gender" - ObjectChoiceField

"Date of birth" - DateField

Using persistent data to store the data entered into these fields, as described in the BlackBerry tutorials (http://na.blackberry.com/developers/resources/A13_Storing_Persistent_Data_V2.pdf), I am able to save and retrieve all of these areas, but only in 'Chain' format.

Unfortunately, this won't work for me for the following reason.

I create the Date of birth as follows

"dateOfBirthField = new DateField (" BirthDate: ", System.currentTimeMillis (), DateField.DATE" ");"

This creates an interface evolved for Date of birth, where the user can select and edit fields month, Date and year separately. When the user saves the information entered and wants to retirve it again, I want to display the date recorded in the same format so that the user can change again in exactly the same way as described above. But if I save it as a string, I can't fill in the field "Date" with the "chain" recovered. That is, I can't do something like

dateOfBirthField.setDate (info.getElement (StoreInfo.DOB));

Where "info.getElement (StoreInfo.DOB)" is similar to what is described in the tutorial.

I searched the web for a possible solution, but never found any. All I found to date stored as a string and recovered just to see what was saved, but not for the changes resulting.

Someone please let me know if what I am asking is possible. If Yes, can you please suggest a way to do it?

Thanks in advance.

Or it can store any object extra Long, no need to create garbage in chains.

Long I = new Long (1234556);

long x = i.longValue)

Send with blackBerry Smartphones, how to retrieve data from blackberry?

Hi, I need to send an email to blackberry and on the user's response, I need to store this data in the database. Can u please help me in this regard. How to send email from web browser, and then retrieve the data in a database.

khushi289 wrote:
OK ya... We use Tomact 6. How do you after that

It is a forum oriented BlackBerry technology, you have questions about web development. I think it's best for you is to find some tutorials on the internet on "how to create a web application on tomcat with a database" or try a forum oriented Tomcat directly.

SQL query for retrieving data based on Certain model

Hi all
I want to retrieve all the identifiers of all the people who are permanently seated during the last hour.
Data are expressed as below:

-Creation of the activity Table

CREATE TABLE activity_log

(

Username, NUMBER of

Activity VARCHAR2 (30),

StartTime VARCHAR2 (6).

EndTime VARCHAR2 (6)

);

-Filling with sample data

INSERT INTO activity_log VALUES('39','Walking','09:01','09:05');

INSERT INTO activity_log VALUES('39','Walking','09:06','09:10');

INSERT INTO activity_log VALUES('39','Sitting','09:11','09:15');

INSERT INTO activity_log VALUES('39','Sitting','09:16','09:20');

INSERT INTO activity_log VALUES('39','Sitting','09:21','09:25');

INSERT INTO activity_log VALUES('39','Standing','09:26','09:30');

INSERT INTO activity_log VALUES('39','Standing','09:31','09:35');

INSERT INTO activity_log VALUES('39','Sitting','09:36','09:40');

INSERT INTO activity_log VALUES('39','Sitting','09:41','09:45');

INSERT INTO activity_log VALUES('39','Sitting','09:46','09:50');

INSERT INTO activity_log VALUES('39','Sitting','09:51','09:55');

INSERT INTO activity_log VALUES('39','Sitting','09:56','10:00');

INSERT INTO activity_log VALUES('39','Sitting','10:01','10:05');

INSERT INTO activity_log VALUES('39','Sitting','10:06','10:10');

INSERT INTO activity_log VALUES('39','Sitting','10:11','10:15');

INSERT INTO activity_log VALUES('39','Sitting','10:16','10:20');

INSERT INTO activity_log VALUES('39','Sitting','10:21','10:25');

INSERT INTO activity_log VALUES('39','Sitting','10:26','10:30');

INSERT INTO activity_log VALUES('39','Sitting','10:31','10:35');

INSERT INTO activity_log VALUES('39','Standing','10:36','10:40');

INSERT INTO activity_log VALUES('39','Standing','10:41','10:45');

INSERT INTO activity_log VALUES('39','Walking','10:46','10:50');

INSERT INTO activity_log VALUES('39','Walking','10:51','10:55');

INSERT INTO activity_log VALUES('39','Walking','10:56','11:00');

INSERT INTO activity_log VALUES('40','Walking','09:01','09:05');

INSERT INTO activity_log VALUES('40','Walking','09:06','09:10');

INSERT INTO activity_log VALUES('40','Sitting','09:11','09:15');

INSERT INTO activity_log VALUES('40','Sitting','09:16','09:20');

INSERT INTO activity_log VALUES('40','Sitting','09:21','09:25');

INSERT INTO activity_log VALUES('40','Standing','09:26','09:30');

INSERT INTO activity_log VALUES('40','Standing','09:31','09:35');

INSERT INTO activity_log VALUES('40','Sitting','09:36','09:40');

INSERT INTO activity_log VALUES('40','Sitting','09:41','09:45');

INSERT INTO activity_log VALUES('40','Sitting','09:46','09:50');

INSERT INTO activity_log VALUES('40','Sitting','09:51','09:55');

INSERT INTO activity_log VALUES('40','Walking','09:56','10:00');

INSERT INTO activity_log VALUES('40','Sitting','10:01','10:05');

INSERT INTO activity_log VALUES('40','Standing','10:06','10:10');

INSERT INTO activity_log VALUES('40','Standing','10:11','10:15');

INSERT INTO activity_log VALUES('40','Walking','10:16','10:20');

INSERT INTO activity_log VALUES('40','Walking','10:21','10:25');

INSERT INTO activity_log VALUES('40','Walking','10:26','10:30');

INSERT INTO activity_log VALUES('40','Sitting','10:31','10:35');

INSERT INTO activity_log VALUES('40','Sitting','10:36','10:40');

INSERT INTO activity_log VALUES('40','Sitting','10:41','10:45');

INSERT INTO activity_log VALUES('40','Standing','10:46','10:50');

INSERT INTO activity_log VALUES('40','Walking','10:51','10:55');

INSERT INTO activity_log VALUES('40','Walking','10:56','11:00');

Based on the data, the user ID 39 must be found, since it's been sitting since 09:36-10:35, which is continuous 1 hour.
Any guidance how to do using SQL query will be of great help and appreciation.
Thank you very much
Kind regards
Bilal

So what exactly is wrong with the request that I already gave you?

Just to remind one untested (because of lack of insert statements) rewrite according to your new data:

with grp as)

Select

username

UserRecognizedActivityID activity

starttime

starttime + endetime + 1

row_number() over (partition by order of starttime userid)

-ROW_NUMBER() over (partition of userid, UserRecognizedActivityID order of starttime)

RN

of activity_log

)

Select

username

min (starttime) starttime

max (endtime) endtime

max (activity) activity

GRP

Group userid, rn

with round (max (endtime) - min (starttime) * 24 * 60) > = 59

Retrieve data

Similar Questions

Maybe you are looking for