Retrieve files from the old hard drive

I have an old desktop pc that was running windows xp. I started the upgrade to vista but lost the product key and never managed to get a new one. There is an error message when I try to start the pc. Im not interested to fix it, but I want to get some files off the hard drive (mainly of music). Currently, I have a laptop running windows 7 and I was wondering if it was possible to connect the hard drive of the PC to my mobile (as an external drive) and recover my media files. Is this possible with the upgrade failed, if so what would I need to do?

Thanks in advance

Hello

Perhaps, but without knowing exactly what you were doing to the old drive I can't guarantee success.

You can buy an external enclosure for your old hard drive that will turn it into a USB drive. You will need to remove the hard drive from your old computer and insert it into the caddy. Before buying the caddy, determine the type of your old hard drive (PATA or SATA) and make sure you buy the correct caddy. PATA hard drives have a very wide (5cm) data compared to SATA cable (less than 1 cm).

If your old PATA drive, I would recommend making sure that the jumpers are positioned for the reader as a "master". There should be a diagram on the hard drive, informs you of the jumper configuration. I met a few caddies who were sensitive to the riders 'cable select' or 'slave', i.e. did not work with these settings.

Once you have connected the caddy via the USB port, no data on this subject should be available via a drive letter.

Tricky

Tags: Windows

Similar Questions

  • How to transfer files from the old hard drive to a disc new hard, old hard disk has been removed?

    I had a hard disk going bad. Installed a new hard drive and the need to transfer files from the old hard drive. I have an external enclosure for the old hard drive and can connect by usb port.

    The process is fairly simple once you put the old drive in the external box. You can use the usual methods of copy and paste in Windows Explorer. If you copy files, complete folders, you can take a look at RichCopy.

    http://TechNet.Microsoft.com/en-us/magazine/2009.04.UtilitySpotlight.aspx

    Tom Ferguson

  • Transfer of files from the old HARD DRIVE to new computer without an old computer. (He's dead - can not use) I have the hard drive, but need help to transfer my old files and settings.

    ·        My old Win XP computer died - it is completely unusable. I bought a new PC with Win 7 Pro and 1 TB. I still have the old HARD DRIVE (250 GB) which I have attached on the new computer using an external enclosure supports SATA drives. The external hard drive is connected to the computer in USB 3.0. I checked that the new computer can see the external hard drive. (I also used for backups by changing the hard drive with a 2 TB drive 'mass storage' - that works.)

    I searched the internet for possible solutions and found no help. If the transfer of files from Microsoft would change the disc to analyze, it would be simple. But if I select the OLD computer it scans the disk I'm on (new) - automatically.

    Is there anyone who has had the same problem? He must be because computers die all the time and people buy new computers - who then, somehow, they get the former transferred files. I could do it manually, but that wouldn't change the settings. Last resort would be to buy an old computer XP (SATA), replace the drive. Transfer the files, and then sell this computer.

    You may be able to recover your data files, but I hope that you will set up your new system to automatically backup a second internal hard drive or an external USB hard drive.

    This suggestion may not work, but it's worth a try. Buy an external USB drive enclosure. They come in two sizes 2.5 "for the portable computer drives and 3.5" for desktop disks. You can purchase adapters for 3.5 "envelopes so that they can also be used with a portable player. Place the hard drive in the enclosure and connect to a USB port of another computer. Several hard disks are more able to start, but the contents of the disc can still be accessed, read and copied from the disk because you do not use the operating system on a failed disk.

    Here is an example of the type of device, I suggest:
    http://www.amazon.co.uk/s/?ie=UTF8&keywords=external+hardrive+enclosure&tag=googhydr-21&index=aps&hvadid=14388537836&hvpos=1t1&hvexid=&hvnetw=g&hvrand=556960941559985931&hvpone=&hvptwo=&hvqmt=b&ref=pd_sl_32uorbwbuk_b

    You need only to the speaker, that you see are not necessarily more expensive. Thereafter, you can put an old hard drive usable, an abandoned because you need a larger drive internal, in the enclosure and use it as additional external storage.

  • Cannot copy files from the old hard drive to new

    Original title: crash and recovery of hard drive problem

    My hard drive crashed it wouldn't boot saying config.sys is damaged or corrupted, I tried to fix it but the sector is damaged. I was using XP, I had a password on my settings. I installed a new hard drive and reinstalled windows XP, but even if I can 'see' the old hard drive (always installed) I can't access my documents, how can I get to them? I know the password but since its an account on another drive it won't give me the chance to log on to the account.

    Assuming that you use the Encrypting File System (EFS) then this article should solve your problem:

    "How appropriate a file or a folder in Windows XP"
      <>http://support.Microsoft.com/kb/308421 >

    HTH,
    JW

  • New hard drive. can I copy the old emails and local files from the old hard drive

    I installed a larger hard drive in my laptop. I still have the old hdd. Both run on Windows 8. How can I copy all the information like e-mail, files, etc. the old hdd to the new HDD. It is in Thunderbird. Please can someone help me?

    Article has step by step instructions.

    Where are you stuck?

  • Cannot access the files from the internal hard drive that has been converted to drive external hard after the motherboard is dead

    I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

    I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

    Uhm... I think the issue here is a misunderstanding of what you watch.

    If you want to access your files from the old hard drive - you need to look in the right place.  If the old system was "Windows 7", "Documents and Settings" is the * wrong * place to look and "Users" would be the place to go.

    You * will * take ownership and change permissions on ALL (you want to propagate to all subfolders/files when do - to save time) in order to get them properly.

    New-->: Windows Vista/7 would have your files located in the directory 'Users' of the root of the drive - and then under your username.

    • \USERS\\Desktop\
    • \USERS\\Downloads\
    • \USERS\\Favorites\
    • \USERS\\Documents\
    • \USERS\\Music\
    • \USERS\\Pictures\
    • \USERS\\Videos\

    ... etc...

    Documents and settings to WIndows Vista/Windows 7 is a symbolic link and would lead to what you see if you tried to use it.

  • Office Pavilion - 400-540hk: unable to retrieve files from the old desktop USB HARD drive

    My old desktop (model: CQ4128HK) can be power on. So I bought a new desktop computer (model: Pavilion Office 400 540HK). I have a lot of important files in my old office, so I bought a SATA-USB enclosure and connect my old hard drive to the new office. However, after connecting the old HARD drive, I can't find my files or windows folders; Instead, I see that a single drive with folders named "Backup-xXXx" or "WindowImageBackup".  Please suggest how to recover my files on the old HARD drive. They are very important. Thank you.

    Hello

    Please try this first: bring the box (old HDD) and connect it to a machine not HP to see how it goes. I remember I have one similar problem in another day; reason: the old HDD still has a "signature" as a boot device.

    Kind regards.

  • I need to get data/files from my old hard drive that won't start no-how I connect it to my new computer?

    I have a new computer with Windows Vista.  My old computer does not start (lights turn on but just spinning noise that nothing appears on the monitor).  I need to get the data/files from my old hard drive.  Can I connect the old drive to my new computer to access the files?

    Connect the older hard drive to your computer and transfer the content:

    How do I add an additional hard drive
    http://www.WikiHow.com/add-an-extra-hard-drive

  • I spilled coffee on my Macbook Air and does not illuminate.  How to transfer files from the external hard drive to backup my new Macbook Air?

    I spilled coffee on my Macbook Air and does not illuminate.  How to transfer files from the external hard drive to backup my new Macbook Air?

    If you had a Time Machine backup, you can use the Migration Wizard and connect your new Mac on the external drive which has the Time Machine backup: move your content to a new Mac - Apple Support

  • My motherboard has exploded and I have the hard drive. How can I copy the address book for a new installation on a new computer from the old hard drive?

    I have the old hard drive in a USB enclosure and connected to the computer again. I have installed firefox and you need to have the address book (critical) copied and inserted information from address book on the new computer. I hope that there is a file I can replace easily?

    Firefox send an e-mail, it's strictly a web browser.

    If you use Firefox to access your e-mail, you use "webmail". You must seek assistance from your service provider or a forum for this service.

    If your problem is with Mozilla Thunderbird, check out this forum for support.
    https://support.mozillamessaging.com/.../home

    or this one

    http://forums.mozillazine.org/viewforum.php?f=39

  • To access the data from the old hard drive connected to the HP Pavilion 500-242ea

    Recently I bought HP Pavilion 500-242ea (Windows OS 8.1) as my old pc died. I connected the old hard drive via the Usb Adapter kit. The old drive appears in the Device Manager and file Explorer and disk management in drive F, but shows no volume. I know that the old drive is not complete and the drive works as I put the disc in and they charge. When I click on the old drive-F car - in the message "Please insert the disk" leader explore appears. Anyone know how to access the data on the old drive which has the cable IDE.

    Please help need to copy the old drive imporatant files.

    Thank you

    Just had to ask, you know the difference between the hard drive and CD/DVD drive?  Don't get angry, read this.

    You said "I know that the old drive... works as I can put disks and they load. When I click on the old player disc-F-in the message "Please insert the disk" leader explore appears. »

    Anything that involves a CD/DVD drive. You can't put a disk on a hard disk.

  • Error code 80070570 0 x to copy the files from the external hard drive for pc under win 7

    I'm trying to copy files from my external hard drive to my pc.  I'm running Windows 7 on my dell Studio and get the error code 0 x 80070570 on several files. Says they are corrupt.  How can I solve this problem?

    Click Start > computer

    Right-click on the external hard drive

    Click Properties > tools

    Click check now to check your hard disk for errors.

    After it is finished, restart the system and try to copy the files again.

    Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

  • Retreival of data from the old hard drive - it freezes the computer when it is connected to the outside

    I have a dell laptop and last week he showed the blue screen and does not start. I got improtant data on starting I have is not a format and replaced with a new hard drive. Now I'm trying to connect to the old hard drive externally detected only D & does not detect drive C on what it blocks my laptop. I tried with other laptops & systems also, but it's the same thing. I have important data in two players. Please suggest a possible solution to recover data.

    Hello

    • What is the blue screen error message that you receive?
    • Have you tried plugging the drive with another computer?
     
    You can check this link:
     
    You can also try updating the chipset drivers on the manufacturer's Web site.
     
  • copy the data from the old HARD drive to a new HARD drive

    have old hard drive with data and op sys - must copy old hard drive data on the new hard drive WITHOUT copying op sys

    a simple way is the best way.

    Help, thanks

    Hello

    1. purchase a USB hard drive enclosure to put the old drive hard in > plug it into the new computer.

    Here is a video on how to do it:

    http://www.YouTube.com/watch?v=SLLQusrmzvI

    2 slave the old hard drive in the new computer, so a new office.

    http://www.WikiHow.com/configure-master-and-slave-in-BIOS-for-two-hard-drive-disk-in-a-single-system

    See you soon.

  • How to move data from the old hard drive to a new operating system, games, songs, vista etc.

    you want to install more hard drive. How can I move all of the data, os, games, music, etc.

    and have computer always starts.

    Hello

    You cannot move by themselves programs

    you need to reinstall it from the original media

    read this about moving everything, including the operating system

    or save your data and reinstall clean vista

    There are different ways to do

    hard drive manufacturers will normally provide the cloning software to move your operating system installed from the old to the new hard disk

    Search for information on this subject on their Web site

    If you have vista business or ultimate, you can use the builtin vista complete PC Backup to move

    read the information below

    http://www.bleepingcomputer.com/tutorials/tutorial145.html

    or if you have vista home version you'll need 3rd party software

    link below is an example of this:

    http://www.Acronis.com/homecomputing/products/TrueImage/index.html

    also to put your machine how you bought:

    1. that vista is preinstalled, you should have a recovery on your old hard drive partition

    You can recovery disks to reinstall on your new hard drive

    ask the manufacturer of the machine how

    2. contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

    they do it for a nominal cost of $

    3. or borrow a microsoft dvd vista

    Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

    they contain all versions of vista

    This is the product key that determines which version of vista is installed

    Save all data, because it will be lost, do the above

    How to make a backup of your data

    http://www.vista4beginners.com/how-to-backup-your-data

    How to restore your files

    http://www.vista4beginners.com/how-to-restore-files

Maybe you are looking for