Retrieve the data from the merged Partition

Similar Questions

• c: overwritten with the new xp pro operating system. Need to retrieve the d: partition.

  My brother installed Windows XP Pro installation disc from my other computer on my desktop HP Pavilion 754n without my permission and I can not access the system restore to perform a non-destructive recovery with the recovery d: partition.  How can I manually start the recovery partition to restore original factory programs?

  Thanks CheryG! I did a non-destructive control cover just to test and it worked.  I have had a few glitches and discovered that I had forgotten to delete the files from my brother of the recovery d: partition.  I have since removed them and am moving forward with the full destructive recovery.  You are a life saver.  Thanks for the help and have a wonderful Thanksgiving holiday.

• How to recover data from a deleted partition?

  Original title: Hi,.

  I have compaq 420 im using windows professional help, but I m scaning my disc hrad but 1 partion office is deleted please retrieve my data and

  pxe error not cooneted hard drive is not dected in my laptop

  Don't try to run anything on the disk hard until you retrieve the data.  Any writing on the disk can destroy data.

  Little damage - use a device to the slave of your hard drive to another system to copy the data.  I use this device to work (about 30 US $): CoolDrivesSATA and IDE Hard Drive & Optical Drive USB adapter Kit COMBO

  Moderate damage - use the file/partition recovery software.  There are a lot of free software out there to do this - but I think it's too complicated to use.  I use GetDataBack to http://www.runtime.org , it is free to see what he can salvage, but it will cost you about $80 (US) to actually recover.

  Serious damage - contact a professional data recovery.  Very expensive, but worth it if you absolutely must have the data to back!

  Then run this bootable hard drive diagnostic procedure: http://www.carrona.org/hddiag.html (read the details at the link) - Test [b] [u] [b] ALL [/ u] of hard drives.

• Can satellite C660-1KT - I delete data from drive D partition

  Hello

  I have a C660-1KT

  He has a drive C with 149 GB of memory.
  There's also a drive marked D Data with 148 GB of memory; only 7 GB of it is used.
  Can I release the remaining memory as my C drive is full.

  Thank you

  The D partition contains the Toshiba recovery image files.
  If you delete these image files, you will not be able to do the HARD drive recovery process and you cannot create the recovery discs...

  Image files so its highly recommended to create the recovery media before you delete these!

• Retrieve my data from 2013 on my window calendar 8.

  Original title: the loss of data on the timing of window 8

  Hello

  I noticed that I lost my data (year 2013) on my window calendar 8. It shows only the data on 2014. I was wondering if you could tell me how to recover my data on my window calendar 8 2013.

  -------------

  Sok san

  Windows 8 calendar is not actually store any data at all, it shows just the most recent stuff he finds the real source of the data.

  To access the true source of the calendar data, go to http://calendar.live.com (if you use Microsoft Calendar of Outlook/Hotmail/MSN/etc.).

• does "set up as new iphone" prevent later restore the data from the old iphone (iphone 4)

  refurb Iphone 4: if I use the option "set up as new iphone", I can retrieve later data from the old iphone from itunes? (macbook 10.6.8 don't dl latest version of itunes @ this time)

  You would be able to restore an old backup him later, but doing so will wipe everything that is currently on the phone. There is no way to combine.

• Satellite C650 14U: recovery media creates the recovery partition?

  Hello, I used the recovery media creator to create a USB flash drive recovery media.

  If I can use that to restore Windows 7 installation on a new hard drive (as the SSD) will be the drive itself have the recovery media on that partition?

  So if I then lose the USB could restore again by pressing zero when turn?

  Or it does not retrieve the Windows partition and nothing more?

  Thank you

  First of all, the new hard drive itself has no partition recovery on it. The recovery partition is a copy of the system partition and locates at another location, therefore, restored from a recovery media unit contains just the partition system without recovery partition.

  Second, if you have a recovery on a local disk partition, you can always restore by pressing zero when power on/off. If this isn't the case, I am sorry to say that you don't you have no source of food.

  In third place, somehow, we can say that it only retrieves the system partition.
  PS: just my personal knowledge.

  Recommendation: freeware system backup and restore - AOMEI OneKey Recovery

• the installation program could not use the existing partition because it does not contain the required free space

  before I have install android 5.0 lollipop on mylaptop but I can't use wifi to connect then I use return windows 8.1 and I decided to install windows 8 because I have experience an error I couldn't manage on windows 8.1 .when I try to install windows 8 it shows me this error Setup could not use the existing partition because it does not contain the required free space... I google search for the solution but could not find so I install the windows partition 8 on my system reserved.

  Hi Lawren,

  Thank you for your update on the issue.

  In this case, you may need to format the entire disk, clean the partitions and reinstall new windows as suggested before. However, I suggest you to contact local support for the backup of your data from hard disk partitions.

  Please post back your results for assistance.

• Error "Cannot open disc" on the bootcamp partition.

  I have Windows XP Pro SP3 Ultimate Edition installed on a partition on my Macbook bootcamp.  When I try to open it with Fusion, after I entered my password, I get the error "cannot open disc" / Users/DBM/Library/Application Support/VMware Fusion/Machines virtuelles/Camp/%2Fdev%2Fdisk0/Boot Boot Camp partition.vmwarevm/Boot Camp partition.vmdk' or one of the snapshot disks it depends on. "." "Reason: the specified file is not a virtual disk."

  Does anyone know what I need to do to get it working?

  doublepedaldylan wrote:

  I have Windows XP Pro SP3 Ultimate Edition installed on a partition on my Macbook bootcamp.

  There is not the OS as "Windows XP Pro SP3 Ultimate Edition"!

  When I try to open it with Fusion, after I entered my password, I get the error "cannot open disc" / Users/DBM/Library/Application Support/VMware Fusion/Machines virtuelles/Camp/%2Fdev%2Fdisk0/Boot Boot Camp partition.vmwarevm/Boot Camp partition.vmdk' or one of the snapshot disks it depends on. "." "Reason: the specified file is not a virtual disk."

  Does anyone know what I need to do to get it working?

  Note: These steps assume that you have a default Apple installation of Windows and a VMware Fusion Boot Camp Virtual Machine default partition and if you changed the Boot Camp partition the Virtual Machine to add additional hard disks to be virtual or RAW disk then do not use these instructions unless you backup the Boot Camp partition the Virtual Machine package first.

  1. If the merger is open, close it.

  2. in a Terminal (/ Applications/Utilities/Terminal) copy and paste command, as the following and then press Enter and it will remove the Boot Camp Virtual Machine meta-data partition. Note: This does not affect the Boot Camp partition to install Windows. Also be sure that you copy the entire command below "rm" line at the beginning of the "(quote) after the p in the Camp of. "

  RM - dfr "/Users/$ the specified item was not found./Library/Application Support/VMware Fusion/Virtual Machines / Boot Camp."

  3. start Fusion (/ Applications/VMware Fusion.app) and select the Boot Camp partition on the library of the Virtual Machine window, and then click the run button.

  Notes: Then, an authentication dialog box appears. "VMware Fusion requires that you type your password." Enter your name and password, and then click OK. (It is necessary to remove the Boot Camp for the merge partition to access it directly).

  Then, we should see a Boot Camp partition message stating "VMware Fusion prepares your Boot Camp partition to run as a virtual machine. This may take a few minutes. This occurs once. »

  When the virtual partition Boot Camp Machine starts for the first time after this VMware Tools may want or will install/update and restart the virtual partition Boot Camp Machine.

• Merge Partition - Space Question

  We have a large table in 10g which has been partitioned from list. As the time has passed data with a valid value is not in any of the lists of the partitions has been inserted several times. These data fall into the default partition

  So we have something like this:

  Table ERRORS

  Partition E_1 values ('A', 'B', 'C')

  Partition E_2 values ('L', ', 'n')-size 600G

  Partition by default E_DEFAULT (but contains data of a single value 'Z') - size 50 G

  Now the seller would like to fix this by adding the values of 'Z' to E_2.

  They offer the following:

  ALTER table split partition (partition E_TEMP, E_DEFAULT) E_DEFAULT ERRORS;

  ALTER table merge E_TEMP, E_2 partition in partition E_2 ERRORS.

  I'm fine with the strategy. I have no doubt that it will work.

  I'm afraid that because the size of the partition is so great the merger will require a 650G extra free in the tablespace. Sellers seem to think that it will just add the 50G to 600G.

  Looking at the documentation, the merge partition section shows:

  "Use the ALTER TABLE ... M ERGE PARTITION statement allows you to merge the contents of two partitions into a single partition. "The two original partitions are deleted, as are all the correspondents index."

  This means to me that it takes two and creates a third, thus requiring the 650G of extra free space.

  But is this always the case if the third partition is actually one of the two being merged?

  For what it's worth, my plan was:

  Failure to Split

  Change the new partition with an empty temp table

  remove the new partition

  Edit E_2 to add the new value

  Insert ERROR select * from temporary table.

  drop temporary table

  I think that this requires free space of 50G.

  Thank you

  My main question, however, and this that I can't test (or do not know how to test) is the solution of partition of merger proposed by the seller requires free space equal to two partitions (in this case 650G) original to work? The seller says no. I think, but can not find documentation or evidence, Yes.

  If the seller says no, ask them for proof. I'm not aware that the internal process has been documented. But you should be able to test quite easily.

  The only reason why a new segment will be created being is if the data would actually be moved. In order to test whether the data is transferred.

  If the data is not moved, it's the same segment as before.

  1 put a line in P1 - examine the IDENTIFIER line

  2 put a line in P2 - examine the IDENTIFIER line

  3 MERGE P2 P1

  4. determine if the data transferred - what ROWID changed?

  The ID will be different if the data has been moved to a new segment.

  create table part_list (State varchar2 (2))
  list partition (State)
  (values of partition p_ca ('CA'),
  values of partition p_wa ('WA'),
  values (default) partition p_default
  );

  insert into part_list values ('CA');

  insert into part_list values ('WA');

  insert into part_list values ("NV");

  Select a State, rowid RID, DBMS_ROWID. ROWID_RELATIVE_FNO (ROWID) fno,

  DBMS_ROWID. ROWID_BLOCK_NUMBER (ROWID) blkno,

  DBMS_ROWID. ROWID_ROW_NUMBER (ROWID) rowno

  of part_list

  STATE, RID, FNO, BLKNO, ROWNO

  CA, AAAV71AAEAAAAs0AAA, 4, 2868, 0

  WA, AAAV72AAEAAAAtEAAA, 4, 2884, 0

  NV, AAAV73AAEAAAAtcAAA, 4, 2908, 0

  ALTER table merge partitions p_ca, p_wa part_list in the p_ca partition

  Select a State, rowid RID, DBMS_ROWID. ROWID_RELATIVE_FNO (ROWID) fno,

  DBMS_ROWID. ROWID_BLOCK_NUMBER (ROWID) blkno,

  DBMS_ROWID. ROWID_ROW_NUMBER (ROWID) rowno

  of part_list

  STATE, RID, FNO, BLKNO, ROWNO

  CA, AAAV74AAEAAAAtjAAA, 4, 2915, 0

  WA, AAAV74AAEAAAAtjAAB, 4, 2915, 1

  NV, AAAV73AAEAAAAtcAAA, 4, 2908, 0

  Note that the ROWID for 'CA' and 'WA' values are different. This means that the lines have been moved. The file number is the same, but the block numbers have changed as to have the line number for 'WA '.

  The fact that existing lines have been moved at all should answer your question about what really makes Oracle. In other words, is NOT just to add the 'WA' line for the existing partitions.

  If you do a SPLIT, but the data of the existing partitions is NOT affected, no data movement is performed. Check this example and see that all existing ROWID components remain the same

  ALTER table part_list split partition p_default ('OR') values

  in (p_or partition, partition p_default)

  He has not given "GOLD" in the partition by default so that Oracle has simply ignored this segment and created a new one for the new partition.

• extract data from record of an E5061B Analyzer

  We have a document from third party showing a Panel before Labview with the plot of an Agilent E5061B Analyzer use. So we think that this is possible.

  We have a parser to use Agilent E5061B. LabVIEW 2014 runs on win7 pc and using a USB GPIB interface. And her example .vi "Agilent ENA series gain trace.vi, Agilent ENA series interactive application.vi, acquired E5061B trace" we can get Labview to retrieve field data from the parser to use Agilent E5061B.

  Dose anyone install Labview on Analyzer here?

  Any ideas?

  Thank you

  Use the help > find instrument Drivers.

  Orders for sustainable intensification of CROPS that uses the driver are all listed in your manual.

• I'll lose data from the drive of the partition during recovery?

  Hi all

  If I use the toshiba recovery CD to format my system, I'll lose data from the disks partition as well or just the C:?

  Hi Justin

  Well, what recovery CD you want to use?
  As much as I know several months Toshiba uses a new version of the CD recovery called Reco.
  You will find the settings option and there you can choose the option when you want to recover the operating system. I think that the first partition is erased.

  The old version of the recovery CD has supported two different options: standard and expert mode. Here it is important to use the expert mode if you want to choose the partition where the OS must be installed

• Retrieve the data from the old hard drive IDE

  I have an old netbook HP TC 4200. I want to retrieve data from it. So I would like to know the details of the envelope required for the hard drive.

  None of the speakers USB external hard drive on the following URL will work. The book loads are also listed.

  http://www.Newegg.com/product/ProductList.aspx?submit=Ene&N=100008040%20600006255%20600006268&IsNodeId=1&name=IDE

• create the http client to retrieve data from web service

  Hello

  I am newbie on our webworks. I need to retrieve data from web service. How to connect to this service and analyzed. There is a tutorial that can help me get started with it.

  Can any one advice me how can I start working with webworks on blackberry 10

  Thanks for any help

  In general, you will need to use an AJAX call to the server

  It really depends on what the server returns as to how the information is easy to digest

  JQuery provides a simple interface, and returns information easy to use

  If you deal with things gets complicated XML according to namespace

  If you look at the raw XML data and it goes something like fred: name you will have questions requiring an implementation of SAX - JSON is simple if you don't get that even if (nothing too confusing here)

  If using an external data source JSON go if you have the choice

  As examples go - just look to the top of JQuery Ajax [JSON / XML] and you will get where you're going quickly

  SAX is MUCH harder because of the namespace - Dublin is the most common and same XML without namespace is not simple to handle, so avoid it if you can

• How to join two tables to retrieve the data from the columns in table two. Tables have primary and foreign key relationships

  Hello

  I want to join the two tables to retrieve the data from the columns of the two table passing parameters to the join query. Tables have primary and foreign key relationships

  Details of the table

  Alert-1 - AlertCode (FK), AlerID (PK)

  2 AlertCode-AlertDefinition-(PK)

  Help, please

  
  

  ----------
  

  Hi Vincent,.

  I think that you have not worked on adf 12.1.3.  In adf 12.1.3 you don't have to explicitly create the association. When you create the EO to your table, Association xxxxFkAssoc, will be created by ADF12.1.3 for you automatically. Please try this and do not answer anything... You can also follow the links below. I solved the problem by using the following link

  Oracle ADF Guide step by step - Oracle ADF tutorial: creating a relationship of the master / detail using Oracle ADF

  ---