Retrieve the IP address of the network on ESXi management card

Similar Questions

• How to retrieve the network icons and the taskbar sound? They disappeared

  original title: extraction and network icons

  How to retrieve the network icons and the taskbar sound?  They disappear from the notification area of the taskbar.

  Hello

  There are different ways to fix it

  read all the information on the link below

  Try Method 1 or 3

  Method 1. :

  1. right click on the taskbar and click Properties.

  2 tab Area of Notification .

  3 check the (on) or disable (off) the options you want or do not want to display on the Taskbar Notification area

  Method of reading 3 etc. in the link below

  How to enable or disable the Notification area system icons in Vista

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

• Not able to configure the network on ESXi (Dell Optiplex 755), how to get a shell prompt to configure the network card or check?

  Any knows is Dell Optiplex 755 is compitable with ESXi server?

  When I want to install ESX 3.5 update 3 on the Dell Optiplex 755, it detects drive hsrd (WD), I don't know what to do?

  ESXi is detecting disc hard but not able to configure network & with ESX 3.5 update 3 does not detect the hard drive.

  Comment (I have 2 HDD on the system, 250 GB WD & WD 1 TB).

  Help please.

  Kind regards

  Mustafa Rashid

  SATA, who worked at the 2 update driver update changed 3.  So, you may be able to work around the problem of disk with a modified file, you can probably find at vm-help, but you will still need a NIC for networking.

  -KjB

  VMware vExpert

• Network down ESXi management.

  Hi all

  Well, my problem is because of my attitude adventerous ... After the discussion with one of my friends I have installed a switch distributed and selected link rising adapter an ESXi vmnic0, it served the vswitch more vmk0 group of ports deal with traffic management, to my surprise, the operation succeeded! (I thought it would give me an error similar to what we get in ESX cannot remove the last adapter to uplink of the vSwitch having the service console). This eliminated my ESXi off the grid. I can't ping and all I have is the mode of tech support. Here, I can't use vicfg because they are not available in ESXi

  Is it possible that I can change the settings and connect vmnic0 return to vSwitch0? Would be great as well if I can be explained why ESXi allows same to disconnect the last map uplink connected to the vswitch (containing vmk0), which is very destructive and not allowed in ESX?

  Thanks a lot for your answer in advance.

  MAK

  You can fix with the esxcfg-vswitch command command line:

  http://www.jume.nl/esx4man/man8/esxcfg-vswitch.8.html

  But you need access to the console.

  André

• Using too much CPU only when loading the network

  When FF works closely with the network (wired or wireless) card for access to the network, CPU utilization spikes in way more than 70% and he stayed there until the page loading process finishes web.
  After the upload is complete, the CPU usage remains somewhere between 5-10%.

  When I look at clips youtube 1080 p, where FF is duty next buffer part of this clip I watch, new CPU use peaks above 70% with the flash plugin and gives a total of a 100% of cpu for a few moments and use which make this clip to stop playing or to frame bad times, and ties.

  I have been activated in about: config webgl acceleration to activate the force and that much improve the initial problem, then I activated gfx.direct2D - activated force and also to improve the problem remaining.
  I also disable the safe_mode parameter file adobe flash config protectedmode = 0.

  I have to mention that the initial problem was way to bad ... 
  

  Now I get to point when I don't know what to do so that FF does not use much CPU loading pages.
  As you can see I use to publish this version of Nightly 64 bit (I think it's the 64-bit version...) which is much more better and I would like to read youtube 1080 p clip normally, after that I have wait a few moments to buffer, before starting to play.
  Version 32 bit FF won't let me watch YouTube without framing hurt when the clip is buffered.

  I was monitoring the Task Manager and all the processes listed... and there, I can't blame antivirus or firewall to the peaks of the processor. Also if I do the rest of the network traffic, as well as inside the network custom CPU even file copy flinch.

  Can someone help or give an opinion on what setting to do, so I can eliminate these spikes?

  Thanks in advance!

  Problem solved partially:

  I have observed that the CPU spikes occur not only while I use FF or mozilla nightly, but on all web browsers (Chrome, IE, Opera, etc) that I have used, while these browsers accessing the network.

  Uninstalling the firewall of the solution of the AV portion has helped a lot and by also disabling the bed in the firewall solution of W7, but for long term use, this isn't the right answer (for my at least). Without any firewall FF work or installed works like a charm, while the CPU usage is increased at a decent level of 50% max (total tasks and running services)!

  Anyway, as I said earlier, my pc without any firewall operation is not a good think to do, so I'll replace my computer with a faster, or I'm going to overclock it at a level that zapping INTERNET and navigation will not infringe too much on the performance of the system, or... I live whit it and I accept the limitations...

  Perhaps, in the development of the FF, programmers will keep in mind that not everyone on this planet has powerful processors - and... give a few options... to decrease the CPU at acceptable levels, event, even if they use the firewall solutions that violate on the CPU while FF is buffering of data across the network.

  I should also mention that Mozilla nightly (64-bit) and FF, are always better then IE - in my opinion - which is.

• Bridging the network connections

  Can I send my internet connection from my card wireless to ethernet cat5 with a software bridge connection in the network connections? WINDOWS VISTA BUSINESS 32-BIT operating system

  See the following article: http://windows.microsoft.com/en-US/windows-vista/Create-a-network-bridge.

  Warning

  You shouldn't create a bridge between an Internet connection and a network connection because it creates an affair not protected between your network and the Internet, which makes your network accessible to anyone on the Internet.  (NOTE: I do not think there is a way to bridge that gap in security even using 3rd party software - although I'm not certain about it at 100% and you can definitely look around for some software or harware which ensure your system.)  Personally, I would NEVER open a hole in my security - you may be subject to unauthorized access, malware, someone actually take control of your computer and lock out of her, adware, spyware, and all the other things that we to protect.  The Firewall will not help because the bridge gives them access through it.  Security software will not help because the network does not detect the intrusion as such.  Yet once, there may be some products that deal with situations of this kind, but I could not find.

  Despite this warning, and in case you find software to protect yourself, here's how:http://windows.microsoft.com/en-us/windows-vista/Add-a-connection-to-a-network-bridge.

  Here's the thing.  I don't know if it is possible to the wireless card.  In my view, that it must come from the wireless network.  If your computer is connected to the network wireless using this card, I think it will work as long as the networks can be.  For bridge work, the two networks be thanked somewhere where the bridge can be created (in my opinion, means that at least one computer must be able to see and access to both networks).  I guess that's the case here.

  I hope this helps.  Take the warning seriously.  You don't want to experience the potential consequences.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• the upgrade to esxi 4.1 and 5.1

  Hello

  I'll be in place upgrade of a host of 4.1 to 5.1 group

  I intend to use using kickstart

  updated - firstdisk = local

  I think the installation is on local disks, but there a lot of LUN fc attached

  question is going to be be sure to use

  updated - firstdisk = local and this installation script?

  should I disconnect all the fc LUNS before installing?

  We do not want to make too many san team

  Thank you

  Since I am the SAN guys too... I always unplug the network storage ESXi when you perform an upgrade because this speed up installation and reduce to the minimum the risk of selecting a wrong option.

  But William posted some present ideas here: http://www.virtuallyghetto.com/2012/04/disable-lun-during-esxi-installation.html

• command to monitor the connection of ESXi 5 iSCSI storage

  Hello

  What is the command to monitor the charge of iSCSI (vmnic 1 and vmnic 2), I have done in a single switch & configured

  It prescribes by vmware.

  any more command to list the network traffic on each card network & vswitch.

  ??

  Thank you

  You can also use performance graph ordinary in vCenter to monitor the two streams of network interfaces for iSCSI, as well as the number of orders, latencies and similar.

• In trying to retrieve the IP address, I get a message "connection to the Local Ethernet adapter, State media... network: media disconnected".

  Original title: connections to the LAN

  I can't establish an internet link. When I go to the command prompt to retrieve my IP address, I get a response stating, "ETHERNET ADAPTER LOCAL AREA CONNECTION: MEDIA STATE...". MEDIA DISCONNECTED. How would I fix this? Thanks for your help

  Hello

  Follow this procedure to ensure that the network the laptop is on and configured correctly.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• The Clones related with 2 cards Ip address irregularities - network

  
  Hello world

  I have a headache to 5.2 view that I need help.

  I build linked clones, virtual machines need to have 2 network cards, 1 on the web and one for residents. I use a customization profile Windows based in vcenter. They go on the field and I set the network to custom settings and then put 2 NICs in DHCP. When I put in service 1 clone it worked, it was on the field, web access and internal ping etc etc. However, I have configured and then another, and I can not connect via RDP and PCoIP. Black screen times out after 10-20 seconds. If I understand correctly this is normally a network problem (normally only about PCOIP rather than RDP, I thought)?

  In any case, I put in service further and it seems (not to the letter) any other the world doesn't want to connect.

  When we look at in connection and vcenter, the only difference I see between the 2 types of vm that tab summary in vcenter, ones that work see the IP address of the card web access and those who do not work, shows the internal IP address. When you click Show all, ips are listed. It's confusing to me!

  When I reset the virtual machine (in vcenter) that allows me to log on to the console and it seems well, once I try to connect to pcoip it fails with the black screen and then I is even more ctrl alt del in the console of the vi client. It does not show that it has received a user either.

  Curiously, I rebooted one that did not work about 4 times and it seemed suddenly to the nic address and I can now connect with pcoip.

  Finally, addressing our network guys, he says that the PCoIP ports are open on the internal network, I can confirm this because it everything works fine in full mode with 1 NIC on the inside.

  Any help would be massively appreciated. Let me know if you need more information.

  Concerning

  David

  The agent will attempt to retrieve an IP address and report it to the connection to the server. Depending on how Windows presents the order of the list, he may decide to use the bad. For multiple network cards, you should follow the link below to configure the subnet mask and to ensure the right, it is always selected: Configure a Virtual Machine with multiple network cards to see Agent

  Mike

• Is it possible to programmatically retrieve the MAC address of a virtual machine VMware

  Can anyone suggest to programmatically retrieve the MAC address of a VMware virtual machine.

  I need a code for the above features.

  Post edited by: AntonVZhbankov

  Corrected in Hyper-V to VMware

  Now that I have a code in front of me, you can try essentially this:

  
  // MAC Variable
  string MACAddress;
  
  // Get Config Info (hardware)
  vmConfigInfo = (VirtualMachineConfigInfo)myAPI.getProperties(vmRef, new String[1] {"config"});
  
  //Iterate through devices
  foreach (VirtualDevice vDv in vmConfigInfo.hardware.device)
  {
      try
      {
          VirtualEthernetCard mycard = (VirtualEthernetCard)vDv;
          MACAddress = mycard.macAddress;
      }
      catch
      {
      }
  }
  

  Basically what's happening hear, you are pulling all the pieces of virtual hardware and iterate through them. If the piece is a network card, copy the following code will be able to cast an and pull up on the Mac. Otherwise, the cast fails and he is going to move. If you have multiple network cards, you want to add the mac to an array of strings, or something to keep account of more than one.

  This code assumes that you have connected and you have a way to make the configuration of the virtual machine property. The function 'getProperty' in the present code referring to my own function, not one in VMWare. If you don't know how to do this, just post back here and I know there are examples of pages out there anyone can post to explain this part.

• 10gr 2-Sybase15-ORA-28545: cannot retrieve the text of the message from NETWORK/NCR

  Hi all
  
  I am trying to establish connectivity between Oracle 10 g 2 (Win XP Pro 2002) and Sybase ASE 15.0.2 (Sun Solaris 5.9) by using the transparent gateway for Sybase (TG4SYBS), but encountered the following error. I have looked for a solution quite well in all directions, but so far have been quite unlucky. This is my last resort. I don't really know what I'm doing wrong as I followed the steps of installation and configuration correctly. Please note:
  -Oracle transparent gateway software and database are installed in different homes; and,
  -J' created and tested the ODBC DSN connectivity with the Sybase server.
  
  The only thing that I have real concern about is the version of the Sybase server 64-bit OS; Windows Oracle server is 32-bit. Are going to count this could be the problem?
  
  ORA-28545: error diagnosed by Net8 when connecting to an agent
  Cannot retrieve the text of the message NETWORK/NCR 65535
  ORA-02063: preceding 2 lines of CSSTAT
  
  
  I am enclosing also any of the configuration system below:
  
  ------------------------------------------------------------------------------
  
  Database server
  ===============
  
  V Windows XP Professional 2002 SP2
  
  Oracle Database 10g Enterprise Edition Release 10.2.0.1.0
  
  Sybase Adaptive Server ODBC Driver 15.00.00.152
  
  
  C:\ > echo %path%
  C:\oracle\product\10.2.0\tg_1\bin; E:\OracleHomes\agent10g\jlib; E:\OracleHomes\ag
  ent10g\bin; E:\OracleHomes\oms10g\bin; E:\OracleHomes\oms10g\jlib; C:\Program Files
  Company \Business Objects\BusinessObjects 6\bin\orb\asp\6.0\bin. C:\Program Fi
  les\Business Objects\BusinessObjects Enterprise 6\bin\orb\bin; C:\Program Files\B
  usiness Objects\BusinessObjects Enterprise 6\bin; C:\sybase\DataAccess\OLEDB\dll;
  C:\sybase\DataAccess\ODBC\dll; C:\sybase\Shared\Sybase Central 4.3; C:\sybase\OCS-
  15_0\lib3p; C:\sybase\OCS-15_0\dll; C:\sybase\OCS-15_0\bin; C:\sybase\JS-12_5\bin; C
  : \sybase\ADO.NET\dll; C:\sybase\ODBC; C:\Program WinRAR; C:\Windows\System32;
  C:\WINDOWS; C:\WINDOWS\System32\Wbem; C:\sybase\DBISQL\bin
  
  ------------------------------------------------------------------------------
  
  Sybase server
  =============
  
  Er1min01 of SunOS 5.9 Generic_122300-11 sun4u sparc SUNW, Sun-Fire-V440
  
  Adaptive Server Enterprise/15.0.2/EBF 14328, P, Sun_svr4, OS 5.8/ase1502/2486/64-b
  IT/FBO/Thursday 24 May 12:18:26 2007
  
  ------------------------------------------------------------------------------
  
  Sybase SQL.ini
  ==============
  
  [MINSAT]
  Master = TCP, 192.168.1.150, 5002
  Query = TCP, 192.168.1.150, 5002
  
  ------------------------------------------------------------------------------
  
  C:\oracle\product\10.2.0\tg_1 > tg4sybs
  
  Oracle Corporation - WEDNESDAY SEP 23 2009 02:43:29.406
  
  Heterogeneous Agent Release 10.2.0.1.0 - Production built with
  Driver for SYBASE
  
  ------------------------------------------------------------------------------
  
  inittg4sybs.ora
  ===============
  
  # This is an example of initialization file of the agent that contains the HS settings
  # needed for the transparent gateway for Sybase
  
  #
  # HS init parameters
  #
  HS_FDS_CONNECT_INFO = MINSAT.csstat
  HS_FDS_TRACE_LEVEL = OFF
  HS_FDS_RECOVERY_ACCOUNT = RECOVERY
  HS_FDS_RECOVERY_PWD = RECOVERY
  #HS_FDS_TRANSACTION_MODEL = READ_ONLY
  
  #
  # Required for Sybase environment variables
  #
  SYBASE the value = "C:\\sybase".
  
  ------------------------------------------------------------------------------
  
  Listener.ora
  ============
  
  listener.ora # Network Configuration file: C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
  # Generated by Oracle configuration tools.
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
  (= Extproc PROGRAM)
  )
  (SID_DESC =
  (SID_NAME = csstat)
  (ORACLE_HOME = C:\oracle\product\10.2.0\tg_1)
  (PROGRAM = tg4sybs)
  )
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = FH)(PORT = 1521))
  )
  )
  
  SUBSCRIBE_FOR_NODE_DOWN_EVENT_LISTENER = OFF
  
  ------------------------------------------------------------------------------
  
  tnsnames.ora
  ============
  
  tnsnames.ora # Network Configuration file: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
  # Generated by Oracle configuration tools.
  
  TEMP =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = FH)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = TEMP)
  )
  )
  
  csstat =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.123.49)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = csstat)
  )
  (HS = OK)
  )
  
  EXTPROC_CONNECTION_DATA =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC0))
  )
  (CONNECT_DATA =
  (SID = PLSExtProc)
  (PRESENTATION = RO)
  )
  )
  
  ------------------------------------------------------------------------------
  
  C:\oracle\product\10.2.0\db_1\BIN > lsnrctl status CSSTAT
  
  LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 23-SEP-2009 02:47
  : 10
  
  Copyright (c) 1991, 2005, Oracle. All rights reserved.
  
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=192.168.123.49) (PORT = 152
  ((1)) (CONNECT_DATA = (Server = Dedicated) (service_name = csstat))(HS=OK))
  STATUS of the LISTENER
  ------------------------
  Alias LISTENER
  Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - production
  ction
  Start date 23 - SEP - 2009 01:48:54
  Uptime 0 days 0 h 58 min 16 s
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  Listener parameter File C:\oracle\product\10.2.0\db_1\network\admin\listener.o
  RA
  Listener log file C:\oracle\product\10.2.0\db_1\network\log\listener.log
  
  Summary of endpoints listening...
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=FH) (PORT = 1521)))
  Summary of services...
  Service 'OEMREP_XPT' has 1 instance (s).
  'Oemrep' instance, State LOAN, has 1 operation for this service...
  Service 'PLSExtProc' has 1 instance (s).
  Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...
  Service 'TEMPXDB' has 1 instance (s).
  Instance 'temp', State LOAN, has 1 operation for this service...
  Service 'TEMP_XPT' has 1 instance (s).
  Instance 'temp', State LOAN, has 1 operation for this service...
  Service 'csstat' has 1 instance (s).
  Instance of 'csstat', status UNKNOWN, has 1 operation for this service...
  Service 'oemrep' has 1 instance (s).
  'Oemrep' instance, State LOAN, has 1 operation for this service...
  'Temp' service has 1 instance (s).
  Instance 'temp', State LOAN, has 1 operation for this service...
  The command completed successfully
  
  ------------------------------------------------------------------------------
  
  C:\oracle\product\10.2.0\db_1\BIN > tnsping CSSTAT
  
  AMT Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production 23-SEP-2
  009 02:48:12
  
  Copyright (c) 1997, 2005, Oracle. All rights reserved.
  
  Use settings files:
  C:\oracle\product\10.2.0\db_1\network\admin\sqlnet.ora
  
  
  TNSNAMES adapter used to resolve the alias
  Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.
  123.49)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = cssta
  (t)) (t)) (HS = OK))
  OK (20 ms)
  
  ------------------------------------------------------------------------------
  
  SQL > create database link csstat connect to the 'fw' identified by ' * ' using 'csstat ';
  
  Database link created.
  
  ------------------------------------------------------------------------------
  
  SQL > select * from sys.hs_fds_class;
  
  FDS_CLASS_NAME
  FDS_CLASS_COMMENTS
  FDS_CLASS_ID
  
  BITE
  Integrated Test environment
  1
  
  ------------------------------------------------------------------------------
  
  SQL > show parameter global_names;
  
  VALUE OF TYPE NAME
  global_names boolean FALSE
  
  ------------------------------------------------------------------------------
  
  SQL > select * from SIMSwap@csstat;
  Select * from SIMSwap@csstat
  *
  ERROR on line 1:
  ORA-28545: error diagnosed by Net8 when connecting to an agent
  Cannot retrieve the text of the message NETWORK/NCR 65535
  ORA-02063: preceding 2 lines of CSSTAT
  
  ------------------------------------------------------------------------------

  you use the Oracle Listener database in C:\oracle\product\10.2.0\db_1\ to spawn TG4SYBS installed in a different House: C:\oracle\product\10.2.0\tg_1. This works when you specify the full path in the listener.ora to tg4sybs executable file. The section of SID might look like:
  (SID_DESC =
  (SID_NAME = csstat)
  (ORACLE_HOME = C:\oracle\product\10.2.0\tg_1)
  (PROGRAM = C:\oracle\product\10.2.0\tg_1\tg4sybs)
  )

  Then STOP and START the listener and try again.

• "Another device on the network use my ip address".

  I tried to check my mail and could not and got this message "another device on the network use the IP address of your computer." I have never seen it before. He also said that I could change the IP address, if I continued to have problems. I bought this iMac and used Migration to transfer all the stuff from my old iMac that is still used. That was months ago, but I never had this message up to now. So should I change one of the IP addresses? And if so, how is that done?

  http://osxdaily.com/2010/09/19/another-device-on-the-network-is-using-your-Compu ters-ip-address.

• That means "another device on the network use the IP address of your computer"?, that means "another device on the network is using the IP address of your computer?

  That means "another device on the network use the IP address of your computer"?, that means "another device on the network is using the IP address of your computer?

  A

  Most likely, the computer becomes a network address of a router. The assignment of an address ("lease") expires and must be renewed after a certain period of time, which could be an hour or a day. The lease expired without being renewed because the device has been disconnected at the time. Meanwhile, the address has been leased to another device on the network, or maybe the router has not updated its list of addresses the leases. When the device offline comes back online, a conflict results. Depending on the type of router you have, the conflict can resolve itself automatically. If not, then in the menu bar, select please

  ▹ System Preferences network ▹ 

  If the preferences window is locked, click the lock icon in the lower left corner and enter your password to unlock it. Click the Advanced button, and then select the TCP/IP tab in the sheet that drops down. Look at the menu option

  Configure IPv4

  If the selection in this menu is

  Using DHCP

  Click on the button

  Renew the DHCP lease

  Test.

  Make sure that you have more than one DHCP server on the network. That could happen if you have more than one access point Wi - Fi, or if you have a router and broadband a wide device distinct in connection mode sharing.

  B

  Less likely, you have a network address that you assigned yourself and another device is itself by assigning the same address. In this case, the selection to configure IPv4 menu will be either manually or using DHCP with manual address. This kind of conflict will not be resolved automatically. You have the following options to solve:

  1. Change the selection in menu using DHCP.
  2. Change the address assigned manually to one that is not used by another device.
  3. Change the address of the other device.

  Which of these options you choose depends on the details of why you use a static IP address. Any changes you make to the network settings is necessary before taking effect. To do this, click OK, and then click apply.

  If the router is also your device at wide band, then he may be operating in bridged mode. In this case, only one customer at a time will be able to connect to the Internet. Consult the manufacturer or ISP documentation for how to reconfigure the device in the connection mode sharing.

  C

  According to a report a "DirectTV" receiver can cause the problem. If necessary, disconnect the device from the network, or power off and test. Consult the support services provider.

• Firefox loses Internet every 5-10 minutes (as for example, Skype does not work), and the only way to solve this is to reset the network adapter (reset DNS and get the new IP address?)

  I click with the right button on the icon of the network adapter and press "fix." After that, I can browse sites for 5-15 minutes. But then the story repeats itself. And all of this can happen while I will have a video chat on Skype, so the internet connection is OK.

  • Try this.
  • Type in the bar of address about: config.
  • Accept the warning.
  • On the page that appears, in the filter box, type Network.http.Max - connections.
  • Replace the value 32 (which is probably the value 256 in your case).
  • Close the topic: config page.
  • Restart the browser.