Retrieve the recovery deleted partition

Similar Questions

• F2C49PA #AB4: recovery deleted partition

  partition recovery deleted it by mistake how can I original recovery image

  Prasanna-pc

  Ordinarily, I advise to use HP recovery media to restore your PC to its original state. That would erase the entire disk, format the drive and install the operating system, drivers and utilities HP.
  
  Unfortunately, there is no support of HP recovery related to HP for your PC Product Page.  This could be an oversight by HP, or it could also mean that HP stock is no longer the recovery media for your PC. They store any long recovery media for older PCs.
  
  You can try to contact the HP customer directly, using the links below, to see if you can order them if:
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!
  
  If HP no longer provides a recovery media for your model, a few other sites, you should check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• Tablet Toshiba WT - recovery deleted partition

  Hello

  I had problem with Windows 8.1, so I tried to update the system, but I couldn't do it and then I tried to get my tablet to the factory setting and what surprised me that now my Tablet have partition and I don't see that "No bootable device - please reboot the system".

  So I guess I deleted my windows 8.1 my Tablet :( How can I fix itn how can I install windows again?

  Please help me!

  If you have deleted the recovery 8.1 of the Tablet Windows partition, you will not be able to use HARD drive recovery option. In this case, you must order the recovery of the Toshiba Arvato service media: http://backupmedia.toshiba.eu/landing.aspx

  Here is also very interesting paper describing the procedure how to recover the Toshiba tablet from recovery media
  http://APS2.toshiba-tro.de/KB0/HTD4103K90000R01.htm

• Satellite T135D-S1324 recovery deleted partition

  Hello

  The recovery partition has been deleted by mistake on my laptop and it was used by another Member of the family, as the system is a mess and I would like to restore it to the out-of-box state.

  Standard methods (keys 0/F8/F12) recommended by Toshiba do not work as expected, and so the I found the last method is of order dvd Toshiba recovery media.

  This is where the problem begins, as this laptop was purchased in the United States and brought back to the United Kingdom.

  I found the support of necessary recovery on the US site, but they don't ship to the United Kingdom, or even order what I need a US billing address.

  And so, I was hoping if someone could advise me on what I have options.

  Thank you in advance,
  BT10

  Post edited by: bt10

  Another option?

  Well, it seems that you will not be able to order that the recovery for the described reason disk waved in your message.
  I think you could use a Windows installation disc that is common to install the Toshiba drivers critical of the system should be available on the page of the Toshiba UE driver

  Or.

  You will find a person in the United States who would order the recovery disk and finally sent to the r - u

• Satellite Pro R850 - 15 H - recovery deleted partition

  My brother was playing with my phone, apparently accidentally deleted partitions on my HDD recovery so that I can not install them the system now. What should I do?

  Now, you have two options:
  1 / you can order the original recovery image for your model of laptop on https://backupmedia.toshiba.eu/landing.aspx

  2 / you can install the version of the OS. All the necessary drivers, tools and utilities, you can download it from http://www.toshiba.eu/innovation/download_drivers_bios.jsp

  If you have any other questions you are welcome.

• Install Win 8 keeping the recovery OEM partitions

  Hello

  I recently bought a new HP Pavilion Sleekbook and it came with Windows 8 x 64 installed. Thing is that I use to make a clean install with the original disc of MS, mainly to get rid of all the bloatware of OEM pre-installed. Problem is I want to be able to use the OEM recovery partition to restore the computer to its factory condition any time.
  When I start my install Win 8, here is the partition table:
  Part 1 WINRE recovery 400 MB
  System part 2 without label 260 MB
  Part 3 untagged 128 MB MSR (reserved)
  Part 4 GB 674,4 unlabeled primary
  Part 5 RECOVERY 23.5 GB OEM (reserved)
  Question is which one of theses are safe to delete in order to keep things HP Recovery and the mechanism of F11 keyboard shortcut?
  My guess is that the part 2 3 and 4 are those that creates a normal installation of WIN 8, right? These would be the ones I want to erase?
  Part 5 is obviously the HP recovery partition so I will not format it, but what is WINRE partition? A new installation of original Win 8 turns off the ability of F11 keyboard shortcut?
  Thanks for your help

  Hello

  Recovery Windows (RE) environment is based on the environment of pre-installation Windows (PE) and can be extended to be a minimalist system to recover a broken system somehow.

  Windows RE is configured in configuration data for starting a system failover for the entry of MBR. If the bootstrapper fails on the default entry, it will automatically try to boot into the recovery environment.

  It is installed on the default system partition.

  The recovery partition is a partition of at least 300 MB. On systems with a formatted MBR disk BIOS, the recovery partition has the type 0x27. On systems UEFI with a GPT formatted the recovery partition has the GUID.

• Satellite Pro L870-172 error 003 when retrieving the recovery DVDs

  Hi all

  Having a devil of a time with this portable darn. So I bought the recovery dvd. tried to boot from the disk and comes with no OS bootable. Thinking it could be a problem with the optical drive, I created a bootable usb key.

  Received the usb key to start

  So I goto Toshiba Recovery Wizard
  Press Yes to say it will wipe the drive.
  Retrieves the software factory default
  In the end, I get an error message

  Error: 003
  Recovery error

  Press ok to start the computer

  You can see the final screen here.
  https://DL.dropboxusercontent.com/s/1fq5yk4t9hjhmk9/2014-09-05%20at%2012.38.PNG?DL=0

  Can anyone help plleeaaaseeee.

  The only thing I can think is that maybe when I created the USB startup key should I copy then disk2 on the stick as well using xcopy.

  I think there are several reasons for the error.
  The recovery media or the hard drive is may be defective. Wrong settings of the BIOS, etc...

  I recommend you to check once more the Toshiba Recovery bootable disc.
  I don t think that there might be a problem with the optical disc drive.
  From my point of view, it could be a bad BIOS setting.

  The Satellite Pro L870-172 has been pre-installed with the system Win 8.
  Please check start secure as well as the UEFI boot mode option in the BIOS.

  Generally, in order to be able to boot from different devices to boot, secure boot must be disabled.

• How to re activate the recovery of partitions after creating new partitions?

  I have recently installed windows 10 preview on a virtual drive of .vhd but for some reason that screwed up in my image recovery and now I cannot update my PC... I don't have a DVD of windows 8.1 so am that student cannot afford the shipping and billing of the Toshiba recovery media order... Does anyone know how do windows checks the partition exists? I have never touched or done something for her cos I avoid me a situation like this so that the readers are just as they were when I got the Pc.

  I saw somewhere about how use reagentc.exe to command prompt can help but I don't know how to make to show the path to partitions cos images are hidden... any help on this is appreciated

  Hello

  Saved on the HARD drive recovery image can be installed (HARD drive recovery facility) if the laptop has only factory settings. Your own experience, something like this is not possible.
  To be honest I m was really asking why you didn't follow the instructions in the manuals s document for creation of recovery media.
  Now, in this situation easier for you had to use this support and install the original version of OS that you got with your machine.

  If you do not want to order the original recovery media is the way to try to create USB recovery media - http://aps2.toshiba-tro.de/kb0/HTD4103KB0000R01.htm

  I really hope this will help you. If this does not work... then you have a problem.

• Pavilion dm4 - 3013cl - recovery deleted partition

  I'm of the Brazil.

  On a trip to Hawaii in March 2012, a friend bought a HP Pavilion dm4 - 3013 cl entertainment pc, product number A6X70UA # ABA. Of course, it came in English. Given its difficulties with the use of the equipment, I proposed to install windows 7 in Portuguese.

  The system did not accept the update. Then I got the "great idea" to remove the recovery partition. After I created the new partition and formatted. Now, I can not install windows 7 home x 64 premmiun.

  At the end of the installation, in the first start, in the direction of the item "finish installation" opens a window titled "Windows Installer" and reported the following error message:

  "Windows could not configure windows to run on a hardware on this computer."

  When the system has restarted, the 'mouse' was not available and open a window titled "Windows Installer" showing an error message again, this time in Portuguese:

  "Windows is unable to complete the installation. To install Windows on this computer, run the Setup again. »

  When I restart the installation, the problem repeats.

  Unfortunately, because it is an imported product, the HP to the Brazil offers no technical support.

  It would be good to have help from friends here in the forum.

  Best regards

  Turkish Lira

  Problem fixed!
  Obrigado a todos!

• retrieve the information of partition table with lack of offline data file

  I just restored a backup of a database. When I unzipped data files, I discovered that a single data file was so damaged in the starting order of the database, I had to put the offline data file. The tablespace which reports the data file holds the information of partition of a table. Since I have no archives from when the data file has been created, I know it is not possible to recover the data file, I have to recover as many lines as possible other files in the tablespace data but when export or create the table as what to choose in the affected partition get ORA-00376 : cannot read file 1624 at the moment.
  
  is there a way to tell oracle to ignore the data offline file and export the remaining data file information?
  
  Just to clarify my situation a little more;
  iI have a table called PPGA_ACTABOPRE that is partitioned by HASH and has 20 partitions, each partition in a different tablespace and tablespace each have about 8 files of data. A data file in the partition 9 is missing and I want is to get the information from the files of the remaining data, but whenever I issue a select statement or an exp or anything I get ORA-00376.
  
  I try to set the flag to ignore blocks corrupt with run DBMS_REPAIR. SKIP_CORRUPT_BLOCKS ('PPGA', 'PPGA_ACTABOPRE'); and then select the info but it did not work.
  
  Any suggestion would be appreciated;
  Thanks in advance

  For the actabopre_p08 partition, some files are available, and we're not. You can access data at the segment level, because some extensions are missing.

  You would need to access the data by rowid. You could loop through dba_extents and use dbms_rowid.create to generate a list of ROWID that may exist in the available data files.

  This may help: -.

  http://kerryosborne.Oracle-guy.com/2009/02/saving-rows-from-corrupt-blocks/
  http://kerryosborne.Oracle-guy.com/scripts/save_u.SQL

  Published by: Robert Geier on March 12, 2010 15:33

• Satellite L300D - Recovery deleted Partition

  Hi all

  I am a fool and deleted the partition recovery on my Satellite L300D.

  I have an installation of WinVista disc, and I found what I thought, were the SATA drivers, loads them in the course of installing Windows - no go.

  Can someone point me to a DL for a recovery disc or the correct drivers to install during the installation of Windows right?

  Any help would be great appreciated!

  > Can anyone point me to a DL for a recovery...
  I put t know what DL, but what I write here is followed by: original recovery image is not downloadable, and if you have the original disk recovery Toshiba for your machine, you must order it under https://backupmedia.toshiba.eu/landing.aspx

  If you want to install own os version, what do you think on Win7?
  I mean I installed Win7 32 bit on friends L300 and it works perfectly.

• HP Pavilion DV6 3122TX recovery deleted partition, need to install windows

  Hello
   
  I have a Pavilion DV6 3122TX laptop. System would block extensively when I ever access any file, was not a virus or whatever it is, I discovered it was the HD due to the error at startup screen "error of hard disk, hard drive 1 (3F1)", I ran all the auto controls and diagnostics but nothing improved. So I formatted the disc completely deleted all partitions even recoveries and other (my bad).

  My recovery disc can not be read by the laptop DVDRom Red flashes for a few seconds and then nothing happens, "said no system disk. Replace the disk and then pres any key blah blah blah... "The drive is fine I checked. I changed the boot options to boot from a CD/DVD internal.

  I need as soon as possible a working windows as a temporary solution. I can't install Windows 7, it seems because of some lock (turns on it was unable to detect the HARD drive). Windows XP cannot see the player because of the requirement of AHCI driver (cannot switch back to IDE) due to the lock of the BIOS. Then I tried the method of slipstream AHCI driver, now, here's my problem I just can't find the AHCI drivers for my laptop since I can not connect to Win to check with CPUz. Can someone direct me to text-mode drivers for this laptop at the wake in winxp x 86 using NliteOS. I'll take the laptop to be fixed at a service center next month, but now I need a solution. Even if you can fix my recovery solution, it would be great.

  I can access the hard disk using Linux. So the HARD drive is ok, please do not refer me to change the HARD drive that is not an option right now. (HARD drive was the problem)

  Sorry for this long post
  Thanks in advance...

  Hello

  Hard drive error, hard drive 1 (3F1) is the disk failure hard try loading in the Bios pass Diagnostics, perform the test, if it fails, you will need to replace the drive. In case your hard drive is not detected in the Bios, you must reinstall the part of the rear panel.

• I can't do the recovery DVDs, 'partition not found' Pavilion 23-h027c

  My recovery image "D" seems to be intact, but when I try to burn the DVD of my recovery it says 'partition not found  Do someone had the same problem and that was the solution? I hope that does not have a full recovery. I backed up my files just in case in the "H" drive. Thanks: pdrodliz

  Contact HP support.

  Read the information that applies to your question in this document from HP web.

  There is also a link to the HP support in the document.

• How can I retrieve the bookmarks deleted by mistake?

  To delete unwanted bookmarks, I deleted a potentially useful in error. Is it possible to restore deleted bookmarks?

  Hello BS01, firefox creates a handful of automatic backups of your bookmarks that you could restore: restore bookmarks from a backup or move them to another computer

• How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  Pure how to install OSX on a Fusion drive and keep the recovery disc function

  These instructions assume that your iMAC partitions or file systems has been damaged and you want to restore to the way most efficiency with fusion drive and the recovery partition, similar to what was built in the factory.

  These instructions work for the iMAC, retina 5K end 2014 version comes with OSX Yosemite. The scores of major drive of the 128 G SSD and 3 TB of HARD drive has been configured as a logical drive (merger by car).

  WARNING: These instructions here are shared for interest only. Readers to take their own risk by following these instructions. The author is not responsible for any damage caused by following these instructions.

  This is the target disk partitions, and the configuration that we want to achieve.

  Disk0 is the 128 GB SSD - solid state drive and holds the start of the partition (disk0s3)

  Disk1 is the 3.0 to HDD - mechanical transmission and holds the Recovery HD partition.

  There are two EFI partitions to partition table GUID on both hard drives (disk0s1, disk1s1).

  Disk space remaining (partition disk0s2 and disk1s2) are used to create the disc of Fusion 3.1 to named "Macintosh HD".

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB LVG 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: disk1s2 Apple_CoreStorage TB 3.0 LVG

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 3.1 TB disk2

  Logical volume on disk0s2, disk1s2

  0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  Fusion unencrypted drive

  Here's how we do it.

  • A. clean reinstallation of Mac OS x.
  • 1. make sure that you back up all your data on the hard drive using Time Machine or other means. The following procedure will delete all data.
  • 2. create the OSX install USB, insert it to the MAC workstation.
  • 3. given that us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 4. in the menu at the top of the screen, select disk utilities.
  • 5. turn highlighted the volume of disk Fusion called "Macintosh HD." Click clear to clean.
  • 6. If his success, then go ahead to install OSX new to that partition, as usual.
  • 7. otherwise, if it does not, that means fusion drive has been damaged.
  • 8 follow the instructions below to fix it.
  • . B. Split disc Fusion in the physical hard disks
  • 1. Since us will be operated on the internal drive of the Mac trunk, assumes that we already have boot up OSX install USB drive (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3. on the screen of the terminal type:
  • Cs diskutil list.
  • You will see something similar to the screen below.
  • 4 copy the long string after Logical Volume and replace the UUID with it in the following command to delete the logical volume of the disc fusion (aka coreStorage of logical volume):
  • diskutil deletevolume cs UUID
  • For example:
  • diskutil deletevolume E59B5A99-F8C1-461A-AE54-6EC11B095161 cs
  • 5 copy the long string after the logical volume group and replace the UUID with it in the following command to remove the drive (aka coreStorage) fusion:
  • diskutil cs remove UUID
  • p. ex. diskutil cs remove E03B3F30-6A1B-4DCD-9E14-5E927BC3F5DC
  • 6. at this stage, the fusion drive has been deleted, and hardsisk SSD and mechanical hard drive will be reappear in diskutil or separate records.
  • 7. If step 5 or 6 takes more than 30 minutes to complete, this means that the fusion drive has been corrupted. You can follow the commands below to clear the table to partition the hard way. First command clears the SSD drive, second command erases the HARD drive.
  • The command does not return a response, after 1 minute, press Ctrl + Z to complete orders. 1 minute is enough data to code and erase the partition table on the disk.
  • cat/etc/random >/dev/disk0
  • cat/etc/random >/dev/disk1
  • . C install a new copy of Mac OS x for the hard drive HDD and tested this disk partition hard recovery work.
  • 1. go on diskutil to create a partition called Macintosh HD HDD hard drive using all the space there.
  • 2 do the same with the mechanical hard drive.
  • 3. follow the usual procedure to boot from the installation of OSX USB and install a new copy of Mac OS x hard disk SSD.
  • 4. This will create the correct priming of the partitions, recovery hard drive partitions and PSX partitions hard disk HDD.
  • 5. once the installation is complete, test if OSX may start successfully, but no need to go through the initial MAC OS x didn't put in place that we're going to waste this and do the installation again later.
  • 6. we must now test if the recovery hard drive partition works.
  • 7. reboot for hard drive recovery (see X - by pressing command and R at the same time during boot right after that you hear sound start and release only a few seconds after you see the apple logo and the progress bar for loading...)
  • 8. it is important to test and make sure that the partition of hard drive recovery.
  • D. recreate the fusion drive
  • 1 since us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3
  . on the screen of the terminal type:
• diskutil list.
• You should find that we have a list of disk group hard physical volume only, no logic here still.
• 4. you will see something similar to the screen below.
• 5. search for the largest partition on the SSD hard drive, which should be close to the maximum size of HDD to the SSD (121 G, for example) and mark the name of the device, this will usually be something like/dev/disk0s2
• 6. search the largest disk partition mechanical forming fusion with the SSD hard drive. This should be close to the maximum size of the mechanical hard drive (for example 3 TB) hard disk and mark the name of the device, this will usually be something like/dev/disk1s2
• 7
. Now let's create the merger in car (group alias logical volume) in the Terminal, type: diskutil cs create nom_lecteur driveIDs
• The number of the driveIDs is unlimited, it may be a number of discs, or a number of disk partitions. Always put the faster discs first, for example for our SSD disk0s2
• For example:
• diskutil cs create fusiondrive disk0s2 disk1s2
• diskutil - the version of disk utility command line.
  cs - This calls for Core Storage, which is necessary for the merger.
  create - creates a basic storage group.
  nom_lecteur - is the name of the drive and how you want that he
• appear in the disk utility (not the Finder - that comes later). You can call it what you like; in our example, we named our Fusion table "Fusion".

driveIDs - Here is the Player IDs of the readers you want as part of your Fusion table, separated by a space. In our example, they are 'disk0' and 'disk1', but it may be different in your configuration.
• It is important that the faster hard drive appears first in the command, which in our case the disk0s2 (a partition in the SSD). In this way, drive fusion will use this disk as primary and the cache. The second disc in the command, in this case disk1s2 (a partition on the HARD disk). The secondary disk (HARD drive) is used to store less frequently used files.  Otherwise, the fusion drive performance will be worse that it is designed for.
• 8. you will see something like below appear on the screen:
• Creation Volume logical storage of kernel
• Move isk0s2 storage of carrots
• Disk1s2 of switching for the storage of carrots
• Waiting for logical volume group appear
• Discovered the new group of logical volumes 'DBFEB690-107B-4EA6-905B-2971D10F5B53 '.
• Store LVG UUID: DBFEB690-107B-4EA6-905B-2971D10F5B53
• Finished CoreStorage operation
• 9 copy to the bottom of the string after "Discovering new Volume Logic Group" using the command + C
• 10. next, create the partition of the merger (alias logical volume) drive named "Macintosh HD".
• In the Terminal, type: diskutil createVolume groupString jhfs cs + size volumeName
• For example:
• Diskutil createVolume DBFEB690-107B-4EA6-905B-2971D10F5B53 jhfs cs + 'Macintosh HD' 100%
• diskutil - once again, this is the version of disk utility command line.
• cs - called the basic storage functions, which are necessary for this arrangement.
• createVolume - this is the command to create the storage area real for the reader who is represented by an icon on your desktop.
• groupstring - this is the long alphanumeric string you copied in the previous step. It identifies the table you created such as getting a volume placed on it.
• jhfs + -the format of the disc. It is Apple (journaled) extended Format, which is recommended for drives with an operating system installed on it.
• VolumeName - the actual name of the volume, how it should appear under the icon. If there is a space in the name, you must put the full name in quotes ("name") or put a slash before the (name Drive\) space. In our example, we made these, naming our volume "Macintosh HD".
• size : this is the size of the volume. In our example, we had a 1.1 TB drive. We used '1100g' to describe what 1100 GB (1.1 TB to base 10). Otherwise, we could have also used 1.1 T or even 100% as a size.
• 11. go to diskutil to verify that you can see this new partition on the list.
• 12. test by erasing all the data from it.
• 13. then you can go ahead to start on the USB drive to install OSX and install a new copy of Mac OS x on it.
• 14. This will allow you to keep the recovery disk feature.
• X. how Prime to recover partition
• Press and hold the command and button R set immediately after hearing the bells to boot.
• Only release it 2 seconds after you see the Apple logo on the screen and the progress bar for the start. This will start the partition of hard drive recovery.
• Y. how-to boot OSX install USB
• Press and hold the command and the optionkey together immediately after hearing the ringing of boot.
• Only release it 2 seconds after you see the Apple logo on the screen and it will give you a list of startup disk choice, choose the OSX install USB to boot from.