Retriving former opus after wipe system

I had recently wiped my computer because if a bad virus and now I canoe get my origanal op back (vista) system I put hp about it and I was wondering is there any way I can recover Vista because xp is really not for me.

Hello:

What PC model do you have?

You may be able to recovery Vista stopped for her discs.

You can read all 25 characters of the product key Microsoft Vista on your PC?   Do not post the key!

If Yes, you can make your own Vista installation media using a USB key and reading the info on the link below on page 289.

http://philipyip.files.WordPress.com/2013/01/Windows-reinstallation-guide-03-03-2013.PDF

Tags: Notebooks

Similar Questions

  • No internet connection after wipe system

    OK, so recently, I wiped my Alienware X 51 R2 to its default state of factory, but once the system itself wiped completely to its default state of the internet connection did not work. Apparently, the internet connection problem was caused by a problem with the wireless adapter, I don't know what the problem is with the wireless adapter.

    I tried to solve the problem, but that did not help and I used the alienautopsy program to analyze the hardware systems but everything was fine. I also checked in the Device Manager and everything rolled up very well here also, so apparently by what I can tell there is nothing physically wrong with my wireless adapter.

    So, if somebody knows what's going on with my computer and how to fix it, help would be very appreciated!

    (I have a Windows 8.1 btw)

    If you expect to see 9 connections when you click left the Internet next to the battery icon on the bottom of the bar of the screen, then that would be wireless.    IF the computer is off line without seeing any other connections, you must be connected with an Ethernet cable. Looks like a problem with wireless.  If it was a problem with the Ethernet cable, the first thing is to ask if you have a cable connection with special protocols, as a name and password, or.  phone call to your ISP can clarify if this was a problem.

    1 check out the switch airport connection.    If the wireless connection is set to.    Windows 8 may sometimes have a problem with these devices to vote does not correctly.

    2. try to return these two going back and forth, giving a minute or two for the OS to see the change and see if wireless starts to see possible links.  Even restart between the evolution of the position of the switches.  (? which resembles a waste of manoeuvre of the silent time.)   It is therefore preferable to three before performing reboots.

    3. right click on the connection icon, choose ' Open network and sharing Center", where you can find things in turn also power off and reset the wireless connections.

    4. you can go to the Dell website, with your Express Service Code and find specific downloads for the hardware in your computer, where you can find Wireless, which Alienware technology recommended that you try to reinstall, as well as the other driver for the Ethernet driver.  Once you have a downloaded copy that you know how to find him, then we can reinstall that over and over.   As well as the network driver.   Spades, just download them all.

    5. I know that for me, because I always support, (and I live in the United States) so I can call the Alienware Technical Support, who really know what they're doing and can probably talk you through all of this, or if you have a wired Ethernet goes, they can remotely you and fix it without having to worry about this.   Alienware Tech have been great to fix things that I messed up.   I hear rumours that they are not so big in other countries.

  • Firefox 4 does not save form data after sending form and pressing the previous button

    Firefox 4 does not save form data after sending form and pressing the back button... It's very annoying that it erases all data. It worked fine on FF3.

    See:

    • Firefox or tools > Options > privacy > History: "don't forget to search and form history."
  • After the system restore, clock is located one hour before because of DST

    Because of a logon error, I had to perform a system restore.  After the system restore has completed, I noticed that my clock is set ahead one hour (DST).  I think that TimeZones eventually applied twice to the clock.  I can put back an hour, but I rather it would be correct.  I tried to re - download the patch for the DST, but that did not help.

    Have you tried to reset the clock -

    "With the time server Sychronising Internet?

    Have you checked your area etc

    TaurArian [MVP] 2005-2010 - Update Services

  • After a system restore to a time before Windows XP, should I leave Safe Mode and restart normally? What other steps should I take in Mode safe?

    After a system restore to a time before Windows XP, should I leave Safe Mode and restart normally.  Completely restored restore operation the registry both before the intrusion of viruses if the date and time specified as the restore point is earlier than the time of the intrusion, but in the same 'on' the cycle of computer?  I have to do something else before going back to safe mode?

    Time as about 23:00 last night 7/29 restoration, first known intrusion by "XP Home Security 2012" was shortly after midnight 7/30.

    I ended up a sde.exe process, which stopped the pop-ups.  A full scan with Norton quarantine, JS. SecurityTool.  After a restart of the computer, the normal features of the programs has been lost by the "Run" menu or icons on the desktop.  By clicking on the icon for the normal .exe files redirected to the dialog box "select a program to open.

    I restarted in Mode safe mode with networking and then restore.  I tried opening IE and Excel and that they work properly in Mode without failure.  They will work correctly when I leave Safe Mode and restart normally.  Should I test other specific applications.

    XP Home Security 2012 seems to have accessed or modified some files to DropBox (not sure how this program was installed, but it was already on).

    Should I delete all DropBox files, just those showing a modification date corresponding to the intrusion of XP Home Security 2012, or don't you worry about this?

    After a system restore to a time before Windows XP, should I leave Safe Mode and restart normally.  Completely restored restore operation the registry both before the intrusion of viruses if the date and time specified as the restore point is earlier than the time of the intrusion, but in the same 'on' the cycle of computer?  I have to do something else before going back to safe mode?

    Time as about 23:00 last night 7/29 restoration, first known intrusion by "XP Home Security 2012" was shortly after midnight 7/30.

    I ended up a sde.exe process, which stopped the pop-ups.  A full scan with Norton quarantine, JS. SecurityTool.  After a restart of the computer, the normal features of the programs has been lost by the "Run" menu or icons on the desktop.  By clicking on the icon for the normal .exe files redirected to the dialog box "select a program to open.

    I restarted in Mode safe mode with networking and then restore.  I tried opening IE and Excel and that they work properly in Mode without failure.  They will work correctly when I leave Safe Mode and restart normally.  Should I test other specific applications.

    XP Home Security 2012 seems to have accessed or modified some files to DropBox (not sure how this program was installed, but it was already on).

    Should I delete all DropBox files, just those showing a modification date corresponding to the intrusion of XP Home Security 2012, or don't you worry about this?

    System Restore IS NOT the way to remove malware. The reason why you do not see the effects of the malware in safe mode is probably due to the fact that the process for most malware does not load in safe mode, and therefore not active.

    Restart the computer in Safe Mode with network. Click HERE. Download Malwarebytes. Update Malwarebytes and perform a full scan.  Choose to quarantine found nothing. Once completed click HERE and download Superantispyware Portable. Run a full scan quarantined found anything yet. Restart your computer in normal mode and perform a quick scan with Malwarebytes.

  • HP 2113w 19: windows 8.1 not will not activate on HP19-2113w after update system.

    Everything worked fine on my PC.  Then the other day, he crashed and said there is a disk error and to analyze the entire disk to find the error. He finished scanning, but windows 8.1 would charge not successfully.  This is why I made an update of the system through HP recovery.  After having done that, windows should start normally, but I lost my activation.  When I tried to activate the answer has been ' key does not work try again later "or something like that.  Kept by train, no luck.  I thought it might have been an error with the update system, so I did the total system reset (after registration of personal data).  Now, I have the same problem with the activation and if I try to navigate in the normal way to activating the screen, the screen disappears.  I can get to the activation by using the command line.   but the key still does not work.  The key that I use I extract from my BIOS data.  Also, I ran the update and reset to the original hard disk partition.

    I hope someone has a solution to this.  Thanks advanced

    Bill

    Hello @beekster,

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    I read your post on how your desktop computer will not activate after a system refresh, and I would be happy to help you in this case!

    To fix this problem, I suggest following the procedure described in this resource on the activation of Windows 8 product, which should help to activate Windows 8.1 on your system.

    Please re-post with the results of your troubleshooting, and I look forward to your response!

    Concerning

  • After the system is booted, the logon process takes 20-30 minutes.

    Microsoft Windows Vista Business SP2 [Version 6.0.6002] / ThinkPad x 301 2776 - A23
    The problem was discovered in November-December 2013.
    After the system is booted, the logon process takes 20-30 minutes (the mouse cursor on the black screen).
    I faced the same behavior in "windows boot" mode when Kaspersky Anti-virus is also uninstalled.
    After 30 minutes, as soon as it was possible to run msconfig, I checked and made sure only microsoft services are running.

    Dear Carlos, thank you very much for the help! The problem was solved by executing the steps suggested in this discussion. Please close this message.

  • All Documents and the missing photos after a system restore, what happened, and how can I recover my files?

    Hello
    All of my documents and photos are missing after a system restore. Here's the story. A virus called "Windows Recovery" popped up earlier and I did a system restore to get rid of him. To restart the computer, all my files and photos were missing. I used the system restore in the past in similar situations and have never had any problems. I opened MS Office, and I found some documents in the recent documents list. They open up fine and I saved them, but is only some of the documents. I can find the files in my documents when I do a search on them, but they are empty, when I open them. I also find some pictures and documents when I do a search for them by name, but I remember only a few file names, so I can't retrieve many files this way.

    Can someone help me out here? Thank you

    Hello

    read the information at the bottom of the below link about what makes this malware hide your data files and the cure for it regarding

    Read article 17

    http://www.bleepingcomputer.com/virus-removal/remove-Windows-Recovery

    also follow the correct for that malware removal steps, just to be safe, let's

  • After the system recovery running following a power outage, my user profile is lost. Unfortunately, he is also the administrator account. How to retrieve the profile or create a new?

    After the system recovery running following a power outage, my user profile is lost.  Unfortunately, he is also the administrator account.  How to retrieve the profile or create a new?

    ·                        Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not work:

    ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    See if the information in the above tutorial will help you.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    Difficulty of a corrupted user profile

    After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/kb/947242

    A temporary profile is loaded after you connect to a Windows Vista-based system

    See you soon.

    Mick Murphy - Microsoft partner

  • No output on the monitor after the system resumes

    After the system goes into hibernation mode, then the mouse is moved or no key is pressed, the monitor does not come to the top again. On the keyboard it no NumLock light at the moment, although num lock is also pressed. If at this time monitor is turned on, it displays "VGA input No Signal" and monitor goes to sleep. Only way is to force a reboot of the system

    Hi AnjanaKumar,

    There are a few things to possibly resolve this problem.

    1. you'll want to make sure you update your video drivers directly from the video card manufacturer's Web site.

    2. it could be the power plan that you configured is not compatible with your configuration:

    http://Windows.Microsoft.com/en-us/Windows-Vista/change-create-or-delete-a-power-plan-scheme

    I hope this helps!

    Debra
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Windows calendar after the system restore notes no longer exist.

    The Windows calendar after the system restore notes disappeared forever, or can be found somewhere?

    Hello

    First we recommend that you search the .ics files confirm the windows calendar old files are present on the hard drive.
    Visit this link for more information: http://windows.microsoft.com/en-US/windows-vista/Tips-for-finding-files
    Windows Vista has an option to cancel the system restore. To do this, follow these steps.
    1. open the system restore by clicking the Start button, all programs, accessories, clicking System Tools, and then click System Restore.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    2. click on undo system restore and then click Next.
    3. proceed to review your choices and then click Finish.
     
    Your computer will restart. When you are finished, you will see a confirmation that the cancellation is complete.
     
    I hope this helps.
     
    Kind regards
    Syed
    Answers from Microsoft supports the engineer.
    Visit our Microsoft answers feedback Forum and let us know what you think.
  • After the system restore point

    After a system restore point, I noticed that two task bar icons are now grey (network and its cursor) can you collect these and if so how?   Thank you

    http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

    How to enable or disable the Notification area system icons in Vista

    See you soon. Mick Murphy - Microsoft partner

  • A refurb Lenovo/IBM PC windows 7.0 SW, software code does not work for charging SW after a system restore

    A refurb Lenovo/IBM PC windows 7.0 SW, software code does not work for charging SW after a system restore. How can I get a new one

    Skip, enter the product key, and then complete the installation.

    Try the phone activation:

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

  • After the system restore, drive Windows media said that there is no element in the music library. Internet Explorer Favourties tab is empty

    Original title: problems after a system restore

    Not just a system restore last night (Windows 7 OS).  And now the various little things do not work quite as it should.  For example, my windows media player said now that there is no element in the music library.  He shows me how to include files in my library, but when I do this (and my old files are still there in my music) nothing happens.

    Similarly, my favorites of the Explorer tab was empty.  I restored an older version, but the bookmarks that were under folders still will not appear in the favorties tab, even if I can see them when I look at the old version, I used to restore.

    Hello

    -For what reason were you running system restore?

    -What version of Internet Explorer is installed on the computer?

    I would suggest trying the following steps and check if it helps.

    Method 1: Launch Windows media player troubleshooting library and check.

    Open the troubleshooter in the Windows Media Player library

    http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

    Method 2:

    Favorites may not appear in the address bar of Internet Explorer 8 after the upgrade to Windows 7

    http://support.Microsoft.com/kb/974852

    To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/ )

    How to back up and restore the registry in Windows

    If the steps in the Microsoft article above did not help, then follow these steps and check.

    1. Click Start
    2. Click on the computer
    3. Type %UserProfile% in the address bar
    4. Press enter on your keyboard
    5. Right click on the Favorites folder
    6. Click on Properties
    7. Click on Previous Versions
    8. Wait for the list of previous versions of load
    9. Select the version that you have lost the files/folders
    10. Click restore...

    Hope this information is helpful

  • Problems with the updates after the system recovery

    Hello.

    After about a week after the system recovery, my computer tried to install updates 110 and stuck on number 56 for more than 3 hours.

    If I disconnect the battery and restart the system stuck halfway through the Configure updates - again for several hours.

    Someone knows what's the problem?

    Regards Terry

    Hello Terry,

    Thanks for posting your question on the Microsoft community.

    Thank you for details on the issue.

    This problem can occur because corrupt Windows Update files or parameters.

    I suggest you run the Windows update troubleshooting tool and check if that helps. Please follow these steps:

    a. press Windows + C keys and click on research.

    b. type Troubleshooting in the search box, click on it in the search results.
    c. click 'show all' and then click 'Windows Update'.
    d. click on 'Next' and follow the on-screen instructions.

    If this does not help, please reset the Windows update components and check.
    Refer to this article:
    How to reset the Windows Update components?
    https://support.Microsoft.com/en-us/KB/971058

    Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
    https://support.Microsoft.com/en-us/KB/322756

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

Maybe you are looking for

  • How to change Mozilla.cfg to set google as default search engine

    Need help with our setting mozilla.cfg file to change the default to yahoo search engine to google.Browser.search.defaultenginename in comments: config already has the default value of 'google', so doesn't justing adding this line of modzilla.cfg - '

  • MBA mid 2013 battery life

    Hello I use a lot for the lat three years my MBA 13', now the number of cycles is about 560 and battery life is at 85% of the nominal capacity. Fine with that. Battery life, however, is bad enough. I think I can get half of what I used when first got

  • Is Lenove t410 (2537PW4) has Bluetooth?

    Hello guysI'm a new user here and lenovo new tooI bought a computer laptop lenovo t410 (2537PW4)I just want to askMy laptop is supported bluetooth?I am using windows 7 ultimate.

  • Smart failure hard drive GLHKHH-6AO74G-XD7X1G-6OEWO3 id

    help required about this error

  • ACS 5.1 - users turning off intermittently

    Hello I am currently having problems with intermittently disabling user accounts. The expiration in global settings is 30 days and the system was and running for less than a week now. Any ideas? Have tried a few things but nothing seems to work in ot