Revalidation of genuine windows 7 key loaded via a non genuine software

Similar Questions

• Windows 7 key is genuine, but it will not activate.

  I used the Genuine of microsoft verification tool and also the tool of validation check when you try to download and install windows virtual pc 2007 and all the two passed. I tried to activate by phone and online, and both failed. The reactivation is because my laptop crashed and I had to reinstall with a real Windows & Home Premium installation disk I had. The key, that I am using is the key that is included on the base of the laptop.

  What should I do to activate windows?

  you use a Lenovo OEM SLP key on a toshiba motherboard. that does not work.

  a change of motherboards invalid OEM license, except in specific circumstances. Why did you change the motherboard?
  for which version and edition of windows is on your COA?
  ) SLP OEM: this key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates.

• Why the * My Genuine Windows 7 Key fails every time I have install on a new virtual machine?

  Hello

  I spend computers constantly in my work.  I have often install new hard drives and move machines, as part of my work.  I bought Windows 7 and have never installed on a machine at a time.  Calling your woefully inadequate to voice recognition phone system to tell you that I indeed expect to install the operating system I paid for * the * out of me.

  I already spent a MacBook for my main machine; you're lucky I am on Windows at all.  In general, I installed Linux on my other machines.  Each installation of my Windows 7 key is a new chance for you to make me not interested in Windows 10.  Each. Unique. Time. (I have to call to 'allow' my installations because that your automatic authorization is either one) broke, or b) is set up to discourage people to install your operating system either.

  Is it possible to add it please my Windows 7 key to a list of 'Yes, this person's owner  Cause I'm in anger.

  Sincerely,

  William Curtis Jarrell

  There is a limit to how many times you can move a version of Windows from one computer to another, once you exceed this limit (typically 5 times) then phone activation is required.

  Why; too often people install Windows on more than one PC without deleting the previous computer. (A license is a key a PC).

  J W Stuart: http://www.pagestart.com

• Activation Windows 7 - "enter a genuine Windows product key.

  My mother-in-law has purchased a new PC desktop Acer in PC World (retailer of the United Kingdom). It came with Windows 7 out of the box and worked for several months, but this week gave error on activation messages. In the computer properties screen, it says "Activation status not available".

  Running the online activation tool gives the error "Windows validation has detected and repaired an activation exploit (used to prevent the proper functioning of the integrated components of Windows license)." You must activate Windows to complete the repair process and be able to use all the features of Windows. Do not worry, we can help you with that. »

  Run the diagnostic tool gives us the following report. The desktop 'Build' 7601. Any suggestions?

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Code of Validation caching online: 0xc004c4a8
  Windows product key: *-* - WJ2H8 - R6B6D-7QJB7
  The Windows Product Key hash: ckKNc + BBPDWmo1LUlOkraNjlQ34 =
  Windows product ID: 00359-OEM-8992687-00006
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {EA2E2A1F-EDD7-4538-BCD7-877A0CC7FF59} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.120503 - 2030
  TTS Error: T:20120723055045061-
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Professional Plus 2007-100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Internet Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {EA2E2A1F-EDD7-4538-BCD7-877A0CC7FF59}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-7QJB700359-OEM-8992687-000062S-1-5-21-2812022692-897429023-3767436718AcerAspire Z3101American Megatrends Inc.. P01-A2 20100719000000.000000 + 000AFC33107018400F408090409GMT Standard Time(GMT+00:00)03ACRSYSACRPRDCT100100Microsoft Office Professional Plus 20071223E2D4DA0B14D86DISQIs1aVBc uM9lGyzDk7DFuyg plus89409-707-5847506-6579214

  Spsys.log Content: U1BMRwEAAAAAAQAACAAAAIJPAAAAAAAAYWECAID4//8wvlG4jmjNAWbXGpOihAOpMHzDmWxsjuqUcHiy3o6ZnskNCksmO/GeGRZFL5XbeziyLYo3q/rZozOQ1ifb1stzrqx+w3WNaAwzkNYn29bLc66sfsN1jWgMM5DWJ9vWy3OurH7DdY1oDDOQ1ifb1stzrqx+w3WNaAwzkNYn29bLc66sfsN1jWgMM5DWJ9vWy3OurH7DdY1oDDOQ1ifb1stzrqx+w3WNaAwzkNYn29bLc66sfsN1jWgMM5DWJ9vWy3OurH7DdY1oDDOQ1ifb1stzrqx+w3WNaAwzkNYn29bLc66sfsN1jWgMM5DWJ9vWy3OurH7DdY1oDDOQ1ifb1stzrqx+w3WNaAx4dZsxs/sxaQSZh6DCEuBH7GOpc4sVhr5WddJPiBAcJvFGsj3w7BP/u48rWfO2it0zkNYn29bLc66sfsN1jWgMM5DWJ9vWy3OurH7DdY1oDDOQ1ifb1stzrqx+w3WNaAwzkNYn29bLc66sfsN1jWgMM5DWJ9vWy3OurH7DdY1oDDOQ1ifb1stzrqx+w3WNaAwzkNYn29bLc66sfsN1jWgMM5DWJ9vWy3OurH7DdY1oDDOQ1ifb1stzrqx+w3WNaAwzkNYn29bLc66sfsN1jWgMM5DWJ9vWy3OurH7DdY1oDDOQ1ifb1stzrqx+w3WNaAwzkNYn29bLc66sfsN1jWgM

  License data-->
  The software licensing service version: 6.1.7601.17514
  Error: the product key is not found.

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0x00000000
  Beyond: 0 x 0000000000000000
  Event timestamp: 6:6:2012 07:48
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID hash: MAAAAAEAAwABAAEAAAACAAAAAQABAAEAeqhcEgyrlpIu9UIgymKKqZwhuqyMVhh5

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC1029 071910 APIC
  FACP 071910 FACP1029
  SRAT AMD FAM_F_10
  HPET 071910 OEMHPET0
  MCFG 071910 OEMMCFG
  SLIC ACRSYS ACRPRDCT
  LASRYVITRAGE 071910 OEMB1029
  INFO 071910 AMDINFO
  NVHD 071910 NVHDCP
  AWMI 071910 OEMB1029
  SSDT A M I POWERNOW

  License data-->
  The software licensing service version: 6.1.7601.17514
  Error: the product key is not found.

  
  

  Your Windows problem seems to be due to a problem with the license store...

  Re-create the license store

  1) click the Start button.

  (2) type: CMD.exe in the field "search programs and files".

  (3) right click on CMD.exe and select run as administrator

  (4) type: net stop sppsvc (it may ask you if you're sure, select Yes)

  Note: the Software Protection service may not be running, that's ok.

  (5) type: cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareProtectionPlatform

  (6) type: Rename tokens.bar tokens.dat

  (7) type: cd %windir%\system32

  (8) type: net start sppsvc

  (9) type: slui.exe

  (10) after a few seconds of activating Windows dialog box will appear. You may need to reactivate and/or re - enter your product key or Activation can occur automatically.

  Reboot, then run again MGADiag and post the report

  TTS Error: T:20120723055045061-

  
  

  You also had a store of inviolable confidence on 7/23. Can remember you what happened on this day.

• How to restore factory settings when Windows does not load?

  I'm recovering from the laptop (Dell Inspiron N5010) friend who has been infected with a malware ransom (ICE Cyber Crime Center Backdoor.Win32.ZAccess.erds). I used the Kapersky rescue disc to remove the virus from the ransom but now Windows will not load and I suspect that the MBR has been affected.  At startup, the Dell logo appears and the window loading appears briefly, but then you have the 'blue screen of death' flashes and the cycle repeats.   The bsod error is:

  A PROBLEM HAS BEEN DETECTED AND WINDOWS HAS BEEN SHUT DOWN TO AVOID DAMAGE

  ON YOUR COMPUTER

  IF THIS THE FIRST TIME YOU ' VE SEEN THIS STOP ERROR SCREE.

  RESTART YOUR COMPUTER. IF THIS SCREEN APPEARS AGAIN, FOLLOW

  THE FOLLOWING STEPS:

  CHECK FOR VIRUSES ON YOUR COMPUTER. REMOVE ANY NEWLY INSTALLED

  HARD DRIVES OR HARD DRIVE CONTROLLERS. CHECK THE HARD DRIVE

  TO MAKE SURE THAT IT IS CORRECTLY CONFIGURED AND COMPLETED.

  RUN CHKDISK /F TO CHECK FOR HARD DRIVE CORRUPTION, AND THEN RESTART YOUR COMPUTER.

  TECHNICAL INFORMATION

  STOP: 0X0000007B (0XF78D2524, 0XC0000034, 0X00000000, 0X00000000)

  The F2 and F12 keys work, but the F8 key will not open the "Advanced Boot Options", so I can't to the "Restore Dell DataSafe and emergency Backup" or any other advanced option.  System Restore will not work either.

  I ran chkdsk and sfc hard disk (via the Kapersky Rescue disk) and neither solved the problem.  Then I copied its data on the hard drive.

  I would like to restore the laptop to factory settings (assuming that it would be better to reinstall Windows because the drivers Dell would be included already?).   There is a folder on the hard disk called "emergency" and contains a Backup*.exe file and several Backup*.dsb files.

  Is given this scenario, possible to restore to factory settings?  Or am I forced to reinstall Windows from scratch?

  What version of Windows?

  7b error message indicates the operation SATA (SATA Mode) setting got changed in the BIOS Setup or possibly the hard drive may be roasted.

  Restart, and then press F2 before Windows starts to load to open the BIOS Setup. Look for the option SATA or SATA Mode operation (models name it differently).  I don't see the BIOS screen options in the online manual, but the options for this parameter can be: RAID, AHCI or RAID Autodetect / ATA. Post back and we say exactly what options are available and how she got now.

  If you are in the BIOS Setup, also find the Boot Sequence option and make sure that the internal hard drive is ranked first on the list. If it is not first, move it to all first, save the changes and exit the installation program. See if it boots now.

  If you reinstall Windows by using a Windows Dell reinstall drive, you should not ask for the product key. It should install automatically by itself. HOWEVER, you will need to have the product keys for all the other apps that you want on this system, for example Microsoft Office, so make sure that you have the product keys and the floppies to install before you clean the hard drive.

• Satellite C50-A-1DV - impossible to Win10 - windows serial key is not valid

  I'd appreciate any help at all!

  I am trying to upgrade to windows 10. I won my windows product key (authentic, same windows installed when bought new by Argos) via the CMD prompt: wmic path softwarelicensingservice is OA3xOriginalProductKey and the 10 windows update tells me that the serial number is incorrect / not valid (I type the code correctly in the update).

  I try to install fresh ISO, all other methods have failed. I believe that this is due to the verification of product key.

  What is going on?

  Please read this thread:
  https://Forum.Toshiba.EU/showthread.php?83853

  Your laptop has been preisntalled already active Toshiba image container system.
  You must perform the upgrade (not a clean install) to get 10 Win.

  Also, Toshiba does not provide the serial key to activate the systems becase the system is activated automatically conneting the laptop to the internet.

• Satellite: Windows product key

  My laptop crashed during a firmware launched by Toshiba software update, I could not recover the soft recovery on the laptop and possibly (accidentally) formatted the drive using recovery software.

  I asked a USB recovery (£40 +!) and used to get the laptop works (or almost).  Now I be prompted to enter a Windows product key.

  The laptop was bought ex-affichage accompanies so no documentation and has no attached Windows sticker.  How can I get the key to enter?  HP would have a record or Microsoft?

  C50 - B - 14 D

  8.1 x 64

  6E107931P

  I had upgraded to W10, but the recovery that struck on the head.

  Any help appreciated.

  I have the HP Envy and asked HP support via chat there if they had the product key... I spoke to a very helpful guy called Paul... He sent me the product key by using the serial/model number...

  He also said I could try running the prompt (run as administrator)

  WMIC path softwarelicensingservice get OA3xOriginalProductKey

  It comes down to the same product key that Paul sent me

  Stuart

• 23 - g013w: Windows product key

  Greetings,

  I had to reset my computer through an infinite loop at startup. Windows cannot repair itself, and all attempts by using the command prompt, start safe mode, etc. failed. So, I did a complete reset. Now, Windows 8.1 will not activate. When I get to the option activate Windows and select it, I simply returned to the desktop. I tried to register Windows via the command prompt, but an activation key is required. The key is not stuck on the computer, and I don't know where to find it. Of course, I'm dead in the water at this stage. I lost three days of work and am pretty frustrated at this point. All the tips, and where can I find the Windows activation key?

  Best,

  James

  Hello
   
  The key is in the BIOS of your machine, please use the following tool to get:
  
     http://www.Belarc.com/free_download.html
  
  When running this tool, it produced a report, scroll to the section of software management. Product key Windows 8 or 8.1 is there.
  
  You can also use the following tool to discover:
  
    https://www.magicaljellybean.com/KeyFinder/
  
  Kind regards

• HP Split X 2 updated for Windows 8 pre-loaded to win 8.1, now cannot run Add function to Windows 8.1

  Hello!

  I bought a HP Split X 2 13.3 "laptop in a show of computer a little more than 1 year.

  It comes with Windows 8 pre-loaded at that time here.

  Later, Microsoft offers a free upgrade for all 8 to 8.1 Win win and I did as well.

  Everything goes perfectly smooth, at least until recently, when I try to go control panel perform add functionality of Windows 8.1.

  He asked me product key!

  When I looked at the bottom of my laptop Split X 2, it doesn't have the Windows product key sticker. There is only 1 sticker hologen Windows 8! Therefore, I use a key finder application to detect the product key.

  I enter the product key when I run add a feature to 8.1 win again, but the windows prompted me key is not valid.

  Why?

  Insalled Win8.1 is the authentic version. I can perform regular updates of Windows without problem.

  Appreciate if any expert can help solve my problem.

  Thank you very much

  Nkboy

  Hello

  The add feature is to upgrade your current Windows 8/8.1 Core Windows 8/8.1 Pro Edition or Windows Media Center Edition 8/8.1.

  It requires you to purchase the particular product key with regard to the option to add features.

  Here are some links to help you understand:

  http://Windows.Microsoft.com/en-us/Windows-8/Add-features-frequently-asked-questions

  http://www.eightforums.com/tutorials/6673-add-features-Windows-8-a.html

  Concerning

  Visruth

• Windows does not load after Windows update on January 8, 2010

  Basically, I've updated windows last night and is gone to bed and after I myself woke up and turned on the computer, windows won't load.

  There was an option to repair, but he says "Startup Repair cannot repair this computer automatically.

  So I ran the hardware test and everything was fine.  I tried to do a system restore... but it is come to the same, exact screen stating that «Startup Repair cannot...» ». I tried to run in safe mode and exactly the same result.

  I don't want to try to restore the computer to factory settings and lose everything I have.

  Help, please!

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include Error Codes, as appropriate, and exactly what happened when you did the update last night.

  In this way, you will receive the best help.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the worst happens, follow these steps below for data recovery before reinstallling:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Update your Windows product key - does NOT (WinXP-SP3 OEM with OEM product key [currently installed system])

  I am trying to replace my product key OEM "generic" with "individual" product key on the label "Genuine Microsoft" at the back of my case.
  I'm preparing the machine for use by my mother - a neophyte computer - live too far away for me to provide practical support.  In the case of mus - PAH, I I I want that product key installed to match the product label "Genuine Microsoft" attached to the case key.
  The system is that an already activated Windows XP Media Center with Service Pack 3 installed - with an installed OEM (?) product key:
  Windows product key: *-* - GDTF9 - B9QW7-BBVH6

  QUESTION: Since I do not know if this license is a license in "Volume" or an "OEM license" it is unclear what instructions to follow...
  I tried the Windows product key update tool... .on the on the system, which withdraws as 'Authentic' (Validation status: genuine) which failed (as described below).  Is it possible to replace this with the "real" product key?

  Following the instructions in http://windows.microsoft.com/en-US/windows/help/genuine/product-key for Windows XP.
  1. open Windows Update Tool product key. (file: KeyUpdateTool_enu.exe)

  I downloaded and ran - with the result following (failure)

  Windows product key update tool
  This application must be run on a supported of the XP operating system version.

  ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
  MGADiag.exe results as follows:
  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: genuine
  Validation code: 0
  Code of Validation caching: n/a
  Windows product key: *-* - GDTF9 - B9QW7-BBVH6
  The Windows Product Key hash: 5kEO8pH8rfJkr7/tAGdnxv6zALo =
  Windows product ID: 76487-OEM-2211906-00806
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 5.1.2600.2.00010100.3.0.med
  ID: {D0681A4F-1398-46D1-BC7C-D250F4F7B1F8} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: Registered, 1.9.42.0
  Signed by: Microsoft
  Product name: n/a
  Architecture: n/a
  Build lab: N/A
  TTS error: n/a
  Validation Diagnostic: 025D1FF3-230-1
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a
  Version: n/a

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: Registered, 2.0.48.0
  Signed by: Microsoft
  Office Diagnostics: B4D0AA8B-543-80070002_025D1FF3-230-1

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Win32)
  Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {D0681A4F-1398-46D1-BC7C-D250F4F7B1F8}1.9.0027.05.1.2600.2.00010100.3.0.medx 32*-*-*-*-BBVH676487-OEM-2211906-008062S-1-5-21-3119560652-910284201-3596502784GatewayGT4010Phoenix Technologies, LTD6.00 PG20051111000000.000000 + 000Gateway, Gateway, Gateway, Gateway440F3A070184C06604090409Time(GMT-05:00) Standard is02genericgeneric109

  License data-->
  N/A

  Windows Activation Technologies-->
  N/A

  --> HWID data
  N/A

  Activation 1.0 data OEM-->
  BIOS string matches: Yes
  String of BIOS marker: 1 c 790: emachines Inc. | 1 c 790: Gateway, Inc.
  Marker of OEMBIOS string. DAT: Gateway, gateway, gateway, gateway

  Activation 2.0 data OEM-->
  N/A
  ///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

  Thank you
  jgrinnel

  SOLVED! Thanks to post Christmas D Paton September on10 in
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/legal-to-upgrade-and-activate-to-Win7-64-bit-from/641a5dd9-7287-47bd-86e0-e6670e6d994b

  Media Center Edition of XP CAN NOT be updated with M$ Product Key Update Tool... "' not supported '!

  Thanks, Noel!
  John

• Pavilion 17-g121wm: laptop refurbished with no Windows license key

  Greetings,

  I just got a used Pavilion laptop. It came with 10 windows pre-loaded and is in perfect working condition, but they stripped all the stickers from him, including one with the Windows license key. If I buy the HP recovery media, it will have the license key, and it'll work on my laptop?

  I'm waiting for a reminder of the repairer's customer service to see if I can get a key from them (I just call a few minutes ago). For the price I paid, I'd take a few steps to take care of this (including buying a new copy of Windows, although I'd rather not if I can avoid it).

  I found it! I am so excited. I have installed and run Belarc Advisor, and he showed a ton of information, including my Windows license key. I stuck that in the right place in my settings and here! It showed that my copy of Windows has been activated before I did, but I didn't have the possibility to create recovery discs, that was my main problem. Windows has accepted the key, and now I have the ability to create a recovery disk. I get an error when I do, but I want to install an update, now that I think it will fix. If it isn't, I think it's fodder for another line of inquiry. @erico, thank you very much for all your time. I hope that this post will help someone else who may be faced with the same problem or something similar.

• Missing Windows Vista key

  Hello

  I recently visited Tiger Direct to remove a virus from my dv6000 (bought new at HP in 2008). They advised that it was better to wipe my system and reload everything, so I let that happen. Now I like my version of Windows is not genuine and to enter my product key, but my Windows the license sticker on the bottom of my laptop is unreadable. I went back to Tiger Direct and they said that HP would be able to give me a Vista key if I gave them the serial number on my laptop. Is this true? I would really like to have my fully operational windows in return and am not currently able to upgrade to another operating system.

  Hello:

  You have to get a set of recovery disks which normally do not need to enter a product key.

  Information on how to order recovery disks is on the link below.

  http://support.HP.com/us-en/document/bph07143

  HP, or Microsoft will give you a replacement windows product key.

  Paul

• How can I get my back windows product key

  I downloaded the sp1 update and after installation it says I typed the product key is not valid for activation and when I checked the MS sticker I discovered it was damaged I have just 5 days left to activate it please help.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: genuine
  Validation code: 0
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - YQQTB - FWK9V-932CC
  Windows product key hash: L1zPFFvNQ04Nunm9BorPaqFl4jI =
  Windows product ID: 89580-OEM-7332132-00031
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.0.6001.2.00010100.1.0.001
  ID: {66F3059C-480D-4A89-ACB3-7BA611491D23} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows Vista (TM) Ultimate
  Architecture: 0x00000000
  Build lab: 6001.vistasp1_gdr.100218 - 0019
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: 6.0.6001.18152

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: 127.0.0.1:8080
  User Agent: Mozilla/4.0 (compatible; MSIE 7.0; Win32)
  Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {66F3059C-480D-4A89-ACB3-7BA611491D23}1.9.0027.06.0.6001.2.00010100.1.0.001x 32*-*-*-*-932CC89580-OEM-7332132-000312S-1-5-21-1966805610-3298255396-2409525533Dell Inc.. XPS M1530                       Dell Inc.. A12 20081119000000.000000 + 000C5323507018400F804090409W. Africa Central Standard Time(GMT+01:00)03DELL M08 109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.0.6001.18000
  Name: Windows Vista, Ultimate edition
  Description: operating system Windows - Vista, channel OEM_SLP
  Activation ID: 5e802570-4657-4e84-bfbc-6a0e531b84af
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 89580-00146-321-300031-02-1033-6000.0000-1442011
  Installation ID: 019912341020674372813400167893916773152936168263768823
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
  Partial product key: 932CC
  License status: initial grace period
  Time remaining: 6780 minute (s) on (4 day (s))

  Windows Activation Technologies-->
  N/A

  --> HWID data
  Current Hash HWID: PgAAAAIABAABAAEAAQABAAAABgABAAEAJJSexMiQzVAeszIPRoMGDDb4Jtvy9LDkJdc87AAarFYu + Gl1Rso =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20000
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  REFERENCE DELL M08 APIC
  FACP DELL M08
  HPET DELL M08
  STARTING DELL M08
  MCFG DELL M08
  M08 DELL SLIC
  OSFR DELL M08
  SSDT PmRef CpuPm

  It is said that I typed the product key is not valid for activation and when I checked the MS sticker that has been damaged, I discovered I have just 5 days to activate it please help.

  A key active OEM_SLP automatic when all things are right - there no need to connect to the Activation of MS servers to do.

  If the conditions are not suitable for a triggered OEM_SLP key, then it will attempt activation with the servers of MS - they are blocked from activation and therefore return an 0xC004C003 error.

  I said looking for the key - not the word :)

  http://www.google.co.uk/search?q=YQQTB-FWK9V-932CC&rls=com.microsoft:en-gb:IE-Address&ie=UTF-8&oe=UTF-8&sourceid=ie7&redir_esc=&ei=uoWUTsezIYrC8QOnzd2hBw#q=YQQTB-FWK9V-932CC&hl=en&rls=com.microsoft:en-gb:IE-Address&prmd=imvns&ei=u4WUTpPfEszD8QP6sJ3rBg&start=10&sa=N&bav=on.2,or.r_gc.r_pw.,cf.osb&fp=abf542ba161ae185&biw=1058&bih=510

• Windows could not load the installer of the image. Help please!

  My HP4010 scanner has stopped working. I tried to reload the software, but now get message ' windows has no load installer for the image. I have uninstalled and reinstalled the HP software and tried as far as I know. I downloaded the latest HP drivers but no change. I should be grateful if you would help.

  Thank you

  John

  Hello

  Step 1: This could also be a problem with the driver. I suggest you to install the right driver for your scanner from the manufacturer's Web site and check if it works very well.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Step 2: Install the latest version of DirectX on your computer.

  Reinstall the latest version of Microsoft DirectX. For more information about troubleshooting and installing DirectX click the numbers below to view the articles in the Microsoft Knowledge Base:
  (http://support.microsoft.com/kb/179113/ ) How to download and install DirectX

  (http://support.microsoft.com/kb/157730/ ) How to determine the version of DirectX using the DirectX Diagnostic tool

  Step 3: You can also delete the upper and lower of your registry filters and check if it works.

  WARNING:

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  a. Click Start and then click all programs.

  b. click Accessories and then click Run.

  c. type regedit and then click OK.

  d. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  e. in the navigation pane, locate and then click the registry key under:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  f. in the right pane, click UpperFilters.

  Note You can also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters. If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step i.

  g. in the Edit menu, click on delete.

  h. When you are prompted to confirm the deletion, click Yes.

  i. in the right pane, click LowerFilters.

  j. in the Edit menu, click on delete.

  k. When you are prompted to confirm the deletion, click Yes.

  Exit Registry Editor.

  Mr., restart the computer.