Reviews of loading fails with Oracle DB but DB SQL

Similar Questions

• Windows error recovery, "load failed with error 1009 (STHIVE #0).

  Hello world

  This problem occurred to me yesterday. When I started windows, there is here a dialog box saying "Windows Error Recovery" and below, is

  "Unable to start Windows. A recent hardware or software change might be the cause. "(I don't remember changing anything)

  "If windows files have been damaged or misconfigured, startup can help diagnose and fix the problem. If the power was interrupted during startup, choose Start Windows normally. »

  There are two options it saying

  -Launch Startup Repair tool

  -Start Windows normally

  When I clicked on start Windows normally, seems that Microsoft Corporation loading bar never ends

  When I clicked launch a startup repair... A box named "Startup Repair" appeared, saying "Startup Repair is checking your system for problems..." "But after that, it seems that nothing had changed. When I opened my laptop once again, he went to the dialog box saying "Windows Error Recovery" again.

  What should I do now?

  My laptop is "Compaq Presario V3500"

  Also, I see that this tread on Compaq.com http://support.hp.com/us-en/document/c01612373 is it safe to do? I ' ts ok for me to lose all my files just to repair this laptop...

• Database upgrade fails with Oracle 10.2.0.4 4.0 to 4.1

  Hi all!

  Because we must go 32-bit operating system to 64-bit for the new vcenter Server, I did a complete reinstall of the server today (keeping the database) and went from 2003 SP2 to Windows 2008 R2 x 64. On it is installed the Oracle 64-bit 10.2.0.4, with the 10.2.0.4 client client ODBC (checked as 64-bit, even though she is curiously named sqora32.dll).

  The problem is that the database never upgrade when I try to install vCenter Server 4.1, ends with an 'Exception that is thrown during the execution of sql script. Check the log file, I see that it is process_temptable0_proc_oracle.sql that is causing the error, and when I open the procedure in Oracle enterprise manager, I see that the error is "ORA-12704: incompatibility of character." Given that the database resides on a separate cluster, the old character set is instact. The NLS_LANG to the vCenter server is defined on the same one (corresponding to the database).

  Anyone got any ideas how to proceed from here?

  Thank you

  Anders

  support VMware came with the following kb: http://kb.vmware.com/kb/1026331

  don't forget to back up the database

  I will post my results soon

• vCAC6 IaaS installation fails with configuration wizard - cannot run SQL Create User command

  Kia Ora.

  Put together the first poc vCAC6. The devices are in place and works fine, now up to IaaS Win2k8r2 with local SQL Express and this install fails. Pre-Reqs work. Installed and patched .NET 4.5 (not 4.5.1) as well.

  I installed as a local administrator on the server arrived at the field of IaaS. Installation running. EXE using run as administrator.

  The installation creates the database in SQL Express premises. I slowly raised privileges to solve the problems, but the same lines are written to the LOG file and there is an installation failed.

  News: 2014-01-15 09 49 58 588 h: construction project is "C:\Program Files (x86)\VMware\vCAC\Server\Database\DeployVMPS.xml" (BuildDB Target.

  News: 2014-01-15 09 49 58 604 h: build succeeded.

  News: 2014-01-15 09 49 58 604 hours: 0 warning (s)

  News: 2014-01-15 09 49 58 604 h: error (s) 0

  News: 2014-01-15 09 49 58 620 hours: time 00:03:35.12

  News: 2014-01-15 09 49 58 667 hours: CREATE USER [serverName\Administrator] to [NVCACIAAS\Administrator] CONNECT

  News: 2014-01-15 09 49 58 682 hours: EXEC sp_addrolemember 'db_owner', 'serverName\Administrator. "

  Error: 2014-01-15 09 49 58 854 h: error: vCAC Configuration Wizard is unable to run the Sql CREATE USER [serverName\admin] FOR LOGIN [serverName\Administrator] command.

  Error: 2014-01-15 09 49 58 854 h: error: vCAC Configuration Wizard is unable to run the Sql CREATE USER [serverName\Administrator] FOR LOGIN [serverName\Administrator] command.

  Is not not a SQL guru, I tried to elevation of privileges and exchanged between using SQL and Microsoft connection. tried to hook up with a new SQL and AD security with rights to MSDB db_owner account. Also as a 'Microsoft authenticated. " each re - run provides the same statements without worrying if the localMachine\Administrator account exists or not.

  Any help much appreciated.

  Thank you and happy new 2014!

  Hi there.

  I added the administrator account of the local computer in the security of SQL Express to the sysadmin role and installation is complete. ?!? Although I tried to use the SA account to install and the same messages of error and success in this file as well newspapers runs.

  Now these lines look like this;

  News: 2014-01-15 10 21 50 978 hours: Service NVCACIAAS\Administrator account is the same account that creates the database.  Task of grant of role of ignored by the database owner.

  News: 2014-01-15 10 21 50 994 hours: Service NVCACIAAS\Administrator account is the same account that creates the database.  Task of grant of role of ignored by the database owner.

  If it is installed, but I don't know why I need to raise the local Sysadmin role administrator account so he could complete or why to create the user account wrong localMachine\Administrator in installation because there was.

  I've rolled back to a previous snapshot and was able to repeat the failure until I added this user account to the Sysadmin role.

  Her go configuration and usage vCAC now. I'll repeat the installation at a later stage.

  see you soon

• Limit the Total number of characters between double Quotes using Oracle 11 g PL/SQL

  Hello

  I need a way to apply a limit of 32 substring for each group of data inside double quotes, with Oracle 11 g PL/SQL.

  Essentially using the following example string that much for me, I have no control of how this string is built:

  str := ‘"AAAAAAA BBBBBBB CCCCCCC DDDDDD1","AAAAAAA BBBBBBB CCCCCCC DDDD",”QWERTY”,”N1N1N1N1N1N1N1N1N1N1N1N1N1N1N1N1N1N1”’;

  I need to go through each group of values between each double quote, for example ("QWERTY") and apply a substring of 32 to each group found.

  So, using the example above of the chain, it's as if I need to do the following:

  str := ‘"substr(‘AAAAAAA BBBBBBB CCCCCCC DDDDDD1’,1,32)","substr(‘AAAAAAA BBBBBBB CCCCCCC DDDD’,1,32)",”substr(‘QWERTY’,1,32)”,”substr(‘N1N1N1N1N1N1N1N1N1N1N1N1N1N1N1N1N1N1’,1,32)”’;

  So in the end, my final result for the str would be composed of four groups where the length of each grouping is less than or equal to 32.

  Any help would be great.

  Thank you.

  Try this (replace with your actual table):

  with the temp as

  (

  SELECT substr (REGEXP_SUBSTR (str,'[^,] +', 1, LEVEL) 1, 32) r

  OF THE TEST

  connect IN REGEXP_SUBSTR(str, '[^,]+', 1, LEVEL) IS NOT NULL

  )

  Select replace (listagg (r, '"," ') in the Group (order by null),' ' "','" ' ")

  temp

  output:

  "VIEN BBBBBBB CASTILLO DDDD", "VIEN BBBBBBB CASTILLO DDDDDD1", "N1N1N1N1N1N1N1N1N1N1N1N1N1N1N1N", "QWERTY".

• Failure of the load of the inventory... OPatch failed to load the inventory for the Home.OPatch Oracle data failed with the error code = 73

  Hello

  I will apply patch bundle and my oracle database 11.2.0.2 and Microsoft Windows x 86 platform. As read the file Readme Oracle recommends to use OPatch utility version 11.2.0.1.3 or later. To check the inventory availability I use the command lsinventory % ORACLE_HOME%/OPatch/opatch.

  It ended to give details below.

  Citing O 11.2 patch .0.1.1

  OPatch could not create/open history for writing file: * my home oracle path***\cfgtoollogs\opatch\opatch_history.txt

  **ORACLE_HOME***\cfgtoollogs\opatch\opatch_history.txt (access is denied)

  Setup Oracle interim Patch version 11.2.0.1.1

  Copyright (c) 2009, Oracle Corporation.  All rights reserved.

  OPatch could open the log file, the recording is not possible

  Home Oracle: *.

  Inventory Center: C:\Program Files\Oracle\Inventory

  from: n/a

  OPatch version: 11.2.0.1.1

  YES version: 11.2.0.2.0

  YES location: * ORACLE_HOME * \oui

  Location of the log file: **ORACLE_HOME**\cfgtoollogs\opatch\opatch2015-04-09_16-27-49PM.log

  History of patch file: **ORACLE_HOME**\cfgtoollogs\opatch\opatch_history.txt

  Failure of the load of the inventory... OPatch failed to load the inventory for the given Oracle Home.

  LsInventorySession failed: LsInventory failed to create the log directory * ORACLE_HOME * \cfgtoollogs\opatch\lsinv\lsinventory2015-04 -.

  09_16-27 - 49 PM .txt

  OPatch failed with error code = 73

  Can someone please help me solve this problem?

  Do I need to install the last opatch utility?

  Hello

  This error message " LsInventorySession failed: LsInventory failed to create the log directory * ORACLE_HOME * \cfgtoollogs\opatch\lsinv\lsinventory2015-04 - .

  09_16-27 - 49 PM .txt "

  indicates that you have a permission problem with your file systems: cfgtoollogs/ORACLE_HOME/opatch

  Check the owner of this file system.

  Kind regards

• OCIEnvCreate failed with return code-1, but the text of the error message was not available. »

  OCIEnvCreate failed with return code-1, but the text of the error message was not available. »

  I get this message (error) after update my customer Oracle 9.0 to 10.1 (used in the .net Oracle connection)

  I would like to get a resolution? If someone has experiece with her.

  THX

  Hello

  To improve assistance to this subject, you can ask your question in the MSDN Forums.

  NET Framework

  http://social.msdn.Microsoft.com/forums/en-us/category/netdevelopment

• IMP-00017: statement failed with error ORACLE 1658:

  # imp system/pass fromuser = touser = file=/disk1/Downloads/dmp/MI61015.dmp databaseName databaseName

  Import: Release 11.2.0.2.0 - Production on Sat Oct 10 09:29:32 2015

  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.

  Connected to: Oracle Database 11 g Express Edition Release 11.2.0.2.0 - 64 bit Production

  Export file created by EXPORT: V11.02.00 by conventional means

  import performed AL32UTF8 and AL16UTF16 NCHAR character set

  Customer export uses the (possible character set conversion) US7ASCII character set

  . imported objects from databaseName databaseName

  . . import of table 'ACCOUNTS' 12 rows imported

  . . table import 'AGREEMENTS' 6 imported lines

  . . importing table "ASSIGNEDDEPT" 0 rows imported

  . . import of 2713 lines imported from the table 'BULKSAVEDCVS '.

  . . import of table "CERTIFICATION" 7 lines imported

  . . importing table "COMMONDOCS" 0 rows imported

  . . table import 'COUNTRY' 256 imported lines

  . . importing table "CVCATEGORIES" 6 imported lines

  . . table 'CVCERTIFICATION' import 92 lines imported

  . . importing table "CVCHECKAGAIN" 56 imported lines

  . . importing table "CVDETAILS".

  IMP-00058: ORACLE error 1653

  ORA-01653: unable to extend table databaseName.CVDETAILS 8192 in the SYSTEM tablespace

  IMP-00028: partial import of the restored previous table: 20960 restored lines

  . . table 'CVLICENSE' import 756 lines imported

  . . importing table "CVPROPERTIES" 69752 imported lines

  . . rows in table 'CVSPECIALTY' import imported 6159

  . . import of 1701 lines imported from the table 'CVVIEWS '.

  . . "DEPT" table import 2 lines imported

  IMP-00017: statement failed with error ORACLE 1658:

  ' CREATE TABLE 'DETAILRESUME' ("D_ID" (14: 0), THE NUMBER OF 'CV_ID' (14: 0), "").

  "NUMBER OF 'CAT_ID' (14: 0), 'DETAILRESUME' CLOB) INITRANS PCTUSED 40 PCTFREE 10.

  1 MAXTRANS 255' STORAGE ' (INITIALS 67108864 THEN 1048576 MINEXTENTS 1 FREELIST).

  "S 1 FREELIST GROUPS 1 DEFAULT USER_TABLES) TABLESPACE 'SYSTEM' LOGGING NOCO.

  "COMPRESS LOB ("DETAILRESUME") AS STORE BASICFILE (TABLESPACE 'SYSTEM' ENABLE '.

  "CHUNK 8192 PCTVERSION 10 NOCACHE LOGGING STORAGE (INITIAL 6" ONLINE STORAGE ".

  "THE NEXT 5536 1048576 MINEXTENTS 1 FREELISTS 1 FREELIST GROUPS 1 USER_TABLES OF."

  "FAULT)).

  IMP-00003: ORACLE error 1658

  ORA-01658: unable to create the INITIAL extent for segment in tablespace SYSTEM

  . . importing table "DOCCATEGORIES" 0 rows imported

  . . table 'EMPLOYERORAGENT' import 62 lines imported

  . . table 'FAQ' import 4 lines imported

  . . importing table "FOLDERCVS" 6 imported lines

  . . table import 'FOLDERS' 3 imported lines

  . . "JOBDETAILS" table import 84 lines imported

  . . table 'JOBKEYWORDS' import 190 lines imported

  . . table 'JOBPOSTINGS' import 84 lines imported

  . . import of table 'JOBPROPERTIES' 89 imported lines

  . . table 'JOBRESPONSES' import 64019 lines imported

  . . table import "LICENSE" 20 imported lines

  . . import of table 'MESSAGES' 0 rows imported

  . . table import 'NEWS' 0 rows imported

  . . table import "SPECIALTY" 301 lines imported

  . . table import "STAFF" 12 rows imported

  . . table import 'TICKET' 0 rows imported

  . . importing table "TICKETCATEGORY" 0 rows imported

  . . importing table "TICKETTEMPLATES" 0 rows imported

  . . import of rows in table 'USERS' 4410 imported

  About to activate the constraints...

  Import completed successfully with warnings.

  #

  Please advise.

  Thank you in anticipation

  Christy H. wrote:

  How can I increase its space?

  That drive you some people to knowledge, but you can't make them think.

  http://www.lmgtfy.com/?q=Oracle+increase+tablespace+size

• Cluster verification utility Oracle failed with the INS-20802 then install 12.1.0.2 on Oracle Linux 7.1 x 64

  Hello!

  You want to install Oracle Clusterware 12.1.0.2 on Oracle linux 7.1 x 64. When installing, everything was fine, except the last step - utility of Cluster Oracle verification failed with the INS 20802.

  In the log file, I found:

  INFO: From audits to clock using Network Time Protocol (NTP) synchronization...

  INFO: NTP configuration file "/ etc/ntp.conf ' verification of the past existence

  INFO: PRVF-7590: 'ntpd' is not running on the node "pdc-sap-ascs1.

  INFO: PRVF-7590: 'ntpd' is not running on the node "pdc-sap-ascs0.

  INFO: GLWB-1024: the demon NTP or Service didn't work on one of the nodes in the cluster.

  INFO: PRVF-5415: check to see if the NTP daemon or service runs failed

  NEWS: Control of synchronization using network time Protocol (NTP) failed

  INFO: PRVF-9652: Cluster Time Synchronization Services check failed

  also in xml file like:

  < ELEMENT > Network Time Protocol (NTP) < / ITEM >

  < DESC > this task checks the synchronization schedule cluster on clusters that use the Protocol NTP (Network Time). < / DESC >

  < MORE_DETAILS > < / MORE_DETAILS >

  < SUCC_NODES > < / SUCC_NODES >

  < FAILED_NODES >

  < NODE ID = 'pdc-sap-ascs1' > < / NŒUD >

  < NODE ID = 'pdc-sap-ascs0' > < / NŒUD >

  < / FAILED_NODES >

  < GLOBAL_ERROR_DESC_LIST >

  < ERROR_DESC >

  < MSG_TXT > PRVF-5507: NTP daemon or service is not running on any node, but the NTP configuration file exists on the following nodes:

  PDC-sap-ascs1, pdc-sap-ascs0< / MSG_TXT >

  < CASE > the configuration file has been found at a node if no NTP daemon or service was running. < / CAUSE >

  < ACTION > if you plan to use CTSS for time synchronization, then NTP configuration must be uninstalled on all nodes of the cluster. < / ACTION >

  < / ERROR_DESC >

  But of all the nodes ntpd is running:

  [root @pdc-sap-ascs0 ~] # ps ax | grep ntpd

  2214 s + 0 pts/0:00 grep - color = auto ntpd

  19438?        SS 0:05 / usr/sbin/ntpd u ntp:ntp g - x

  [root @pdc-sap-ascs1 ~] # ps ax | grep ntpd

  11492 pts/0 s + 0:00 grep - color = auto ntpd

  19090?        SS 0:05 / usr/sbin/ntpd u ntp:ntp g - x

  So, why postinstall auditor has not found of ntpd running?

  This situation was prior to installation, I started, but this time I ignored the warning.

  Thank you very much for your answers!

  The problem is that in both servers, I want to use ntp, and I wrote in the configuration on both servers,

  Server ntp.myorg.local iburst

  but we use two IPs for ntp, both resolved through dns servers, so in my case the first server got a single for the ntp server ip address and then got another ip. It was a problem and check postinstall determine that the servers use different time sources and do not like this situation.

  Once I changed ntpd config to use ips, check postinstall succeeded.

• Oracle RAC 12.1.0.2 (GI battery) deployment on OEL 7 (3.8.13 - 35.3.4.el7uek) fails with ORA-27102

  Hi guys,.

  I am currently trying to deploy a complete installation (GI battery) of Oracle RAC 12.1.0.2 cool on OEL 7 (3.8.13 - 35.3.4.el7uek) with 2 nodes for validation purposes. However the installation itself went well, but 'Creation repository for Oracle Grid Infrastructure Management container' step fails with "ORA-01034: ORACLE not available / ORA-27102: out of memory / Linux-x86_64 error: 12: cannot allocate memory". The steps of runInstaller validation completed successfully, but I never take this step of configuration without jumping.

  Here is my configuration which should normally avoid such errors ORA.

  Host

  -bash - $4.2 uname - a

  Linux OELRAC1 3.8.13 - 35.3.4.el7uek.x86_64 #2 SMP Tue Jul 29 23:24:14 CDT 2014 x86_64 x86_64 x86_64 GNU/Linux

  "Creation of repository database for Oracle Grid Infrastructure Management container" error in /oracle/base/cfgtoollogs/dbca/_mgmtdb/trace.log

  From restoration to August 9, 14

  allocated channel: ORA_DISK_1

  channel ORA_DISK_1: SID = 12 type of device = DISK

  channel ORA_DISK_1: from the restore backup set data file

  channel ORA_DISK_1: specifying datafile (s) to restore from backup set

  channel ORA_DISK_1: restore datafile 00003 to + GRID

  channel ORA_DISK_1: backup /oracle/grid/12102/assistants/dbca/templates/MGMTSeed_Database.dfb piece reading

  channel ORA_DISK_1: ORA-19870: error when restoring the backup /oracle/grid/12102/assistants/dbca/templates/MGMTSeed_Database.dfb piece

  ORA-19504: could not create the file "+ GRID.

  ORA-17502: ksfdcre:4 cannot create the file + GRID

  ORA-15001: diskgroup 'GRID' does not exist or is not mounted

  ORA-01034: ORACLE not available

  ORA-27102: out of memory

  Linux-x86_64 error: 12: cannot allocate memory

  Additional information: 2663

  Additional information: 1565392897

  Additional information: 161480704

  switch to the previous backup

  Number of folder of the data file = 3 name = + GRID

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of the restore command at 09/08/2014 19:41:47

  ORA-01119: error in creating file of database "+ GRID.

  ORA-17502: ksfdcre:4 cannot create the file + GRID

  ORA-15001: diskgroup 'GRID' does not exist or is not mounted

  ORA-01034: ORACLE not available

  ORA-27102: out of memory

  Linux-x86_64 error: 12: cannot allocate memory

  Additional information: 2663

  Additional information: 1565392897

  Additional information: 1614807040

  RMAN-06956: create the data file failed; try again after removing + OS GRID

  SHM / CPI (check the id of shm with previous information)

  -bash - $4.2 ipcs - a

  -Shared memory segments-

  key shmid owner perms bytes nattch status

  1565360128 0 x 00000000 grid 640 4096 0

  1565392897 0 x 00000000 grid 640 4096 0

  0xfba47600 1565425666 640 24576 29 grid

  Memory of the ASM instance setting

  SQL > see the memory settings

  VALUE OF TYPE NAME

  ------------------------------------ ----------- ------------------------------

  whole big memory_max_target 1076M

  whole large memory_target 1076M

  ASM disk groups

  SQL > select NAME, STATE, TOTAL_MB, USABLE_FILE_MB from v$ asm_diskgroup;

  NAME STATE TOTAL_MB USABLE_FILE_MB

  ------------------------------ ----------- ---------- --------------

  RACK MOUNTED 6144 4868

  / dev/shm to memory_target (more than enough free space)

  -bash - $4.2 df-h

  Size of filesystem used Avail use % mounted on

  tmpfs, 630M 2.4 G 3.0 G 21% / dev/shm

  Kernel for SHM limits set to unlimited parameter

  -bash - $4.2 sysctl - a | grep shm

  kernel.shmall = 1152921504606846720

  kernel.shmmax = 922337203685477580

  User limits on unlimited for memory

  -bash-4, $ 2 cat /etc/security/limits.conf

  # Oracle settings

  grid soft nproc 2047

  grid hard nproc 16384

  grid soft nofile 1024

  grid hard nofile 65536

  Oracle nproc 2047 soft

  Oracle nproc 16384 hard

  Oracle soft nofile 1024

  Oracle hard nofile 65536

  * hard memlock unlimited

  * soft memlock unlimited

  -bash - 4, $ 2 known - grid

  -bash - $4.2 ulimit - a

  the file size (blocks, - c) of base 0

  (kbytes, - d) data seg size unlimited

  scheduling priority (-e) 0

  size of the file (blocks, f) - unlimited

  pending signals (-i) 23953

  Max locked memory (kbytes, - l) unlimited

  size of the memory (k, m) max - unlimited

  open files (-n) 1024

  a size (512 bytes, - p) 8 hose

  (Bytes, - q) POSIX message queues 819200

  real-time priority (-r) 0

  size (Ko, - s) 8192 battery

  time processor (seconds,-t) unlimited

  Max user process (-u) 2047

  virtual memory (KB), - v) unlimited

  the locks on files (-x) unlimited

  So what the hell is wrong here? Why the instance ASM (+ ASM1) returns the error below, even if there is no memory limit / problem. The error with the disk group is also absolutely no sense.

  ------------------------------------------------------------------------------------------------------------------------

  ORA-01119: error in creating file of database "+ GRID.

  ORA-17502: ksfdcre:4 cannot create the file + GRID

  ORA-15001: diskgroup 'GRID' does not exist or is not mounted

  ORA-01034: ORACLE not available

  ORA-27102: out of memory

  Linux-x86_64 error: 12: cannot allocate memory

  Additional information: 2663

  Additional information: 1565392897

  Additional information: 1614807040

  ------------------------------------------------------------------------------------------------------------------------

  Someone at - he encounter the same problem with 12.1.0.2 by deploying the CDB for Grid Infrastructure Management repository? Is there something special with UEK3 (3.8.13 - 35.3.4.el7uek) on 7 OEL? Any necessary special kernel parameter (although the runInstaller controls do not mention)? I'm totally tapped by GI 12.1.0.2.

  Thank you.

  Best regards

  Stefan

  Hi guys,.

  I was finally able to solve this problem.

  She was related to a memory on the provisioning of problem in the virtual environment as both nodes are VMs. Unfortunately none of these errors of memory were populated / pushed somehow in the virtual machine.

  Best regards

  Stefan

• Load Balancing configuration failed with the failure of the connection shared after 11.1.2.2 11.1.2.3 upgrade

  Hello

  We have our EMP system had put 11.1.2.2 to 11.1.2.3 and it's a broadcast environment (Windows 2008 Server) and in one of the server, we installed FDM and after 11.1.2.2 upgrade to 11.1.2.3.

  When we load balance FDM Configuration, SSP is failed with " Shared Services Connection Failed '

  What I did:

  Deleted all entries in the object load balancing DCOM {E652643D...} and the Application Server Config {26AD6592..} and the COMJNIBridge DCOM objects. Re-directed EMP config for FDM application server

  and reconfigured the FDM with mycmsc\svc_hyperionfdm of the user application server. Config of load balancing is still unable to the connection of Shared Services with the error "Shared Services cannot connect".

  I tried the local administrator user but fails in the same way

  Windows system log entries:

  The application-specific permission settings do not grant Local Activation permission for the COM with CLSID {E652643D-6CC1-48AC-915D-01842B04F292} server application and the APPID

  {E652643D-6CC1-48AC-915D-01842B04F292} the user NT AUTHORITY\SYSTEM SID (S-1-5-1 of the address LocalHost (using LRPC).

  This security permission can be modified using the Component Services administrative tool.

  Windows Application log entries:

  Recovery of the class factory COM for component with CLSID {E652643D-6CC1-48AC-915D-01842B04F292} failed due to the following error: 80070005.

  COMJNIBridegWrapper.log entries

  08/07/2014 10:42:06: unknown COMException error

  at Microsoft.VisualBasic.CompilerServices.LateBinding.InternalLateCall (Object o, Type objType, String name, Object [] args, paramnames, CopyBack [] Boolean String, Boolean IgnoreReturn) at

  Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateCall (Object Instance, Type, Type, String MemberName, Object [] Arguments, String [] ArgumentNames, TypeArguments, Boolean] [] Type

  CopyBack, Boolean IgnoreReturn) at Hyperion.Fdm.Api.Common.Security.Authentication.AuthenticateUser (String userName, String password, the domain, String String & ssoToken)

  Hello

  Finally, we could solve this problem. Thank you for all your help.

  Kind regards

  VJ

• How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now?

  How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now with 10.11.3.  I would like to restore the previous version of the operating system without losing any data created in various applications since the 10.11.1.  Fortunately, I had only to use Time Machine is rare over the years, I do not know if you have to return the entire drive to the chosen date or it can somehow just go back to a previous state of OS.  Any suggestions, much appreciated.

  OS X El Capitan: revert to a previous version of OS X

• I am trying to upgrade my XP to Windows 7. I bought a licensed copy of Windows 7 with SP1 dvd but it's a udf file and I can not load.

  I am trying to upgrade my XP to Windows 7.  I bought a licensed copy of Windows 7 with SP1 dvd but it's a udf file and I can not load.  What should I do?

  Boot you from the DVD first? Or have you tried to open it in Windows Xp?

• 'Environment of the user' Windows cannot load the user's profile, but you have logged on with the default profile for the system.

  Original title: the user environment

  After starting windows, on the Welcome screen, this message always comes.
  "User environment.
  Windows cannot load the user's profile, but you have logged on with the default profile for the system. DETAIL: Not enough memory is available to process this command.
  And all my files that I save before you shut down or restart my pc all the my sample files on the desktop, my documents disappear...

  Thanks... :)

  This is typical of a corrupted profile.  To recover, perform the following steps:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  Almost always, corrupt profiles are accompanied by damaged drive.  During recovery, run a disk check with the /r or /f on your computer option.

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  HTH,
  JW

• KB2596764 security update fails with 80070643. A ran "FixIt" and restarted OSE but no luck.

  Try to install the update of security KB2596764 (for PowerPoint 2007) but it fails with 80070643.  I ran Ran "FixIt" and restarted OSE as instructed but no luck.  The error still occurs.  What else can I try?

  Hello

  What Fixit did you run?

  Method 1:

  If you have tried the fixit following article form, then try the steps to repair the. NETFramework installation and check if it helps.

  You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates

  Method 2:

  You can also try to download and install the standalone update package and check.

  Update of security for Microsoft Office PowerPoint 2007 (KB2596764)