RH6.3, esx4.1u3, esxi5.1 support?

support for platforms powervault matrices indicate support for these?

We have no ETA if or when the support will be added for these operating systems. I recommend to check the support matrix from time to time and if we find the site www.support.dell.com.

Tags: Dell Tech

Similar Questions

  • ESX4 or ESXi5 do not proceed with installation on servers Dell R720

    I'm getting below error when installing esx4 and esxi5

    Please advise...

    Thnaks

    Sunilesx4.jpgexx4..jpgesxi5.jpg

    According to the material used in the host (e.g. network adapters), you need to either inject drivers appropriate installation image / iso using the Image Builder or cehck if the hardware vendor provides you with a custom installation image (see, for example, http://www.dell.com/support/drivers/us/en/04/DriverDetails/Product/poweredge-r620?driverId=XWYR5&osCode=XI51&fileId=3005015335)

    André

    PS: Discussion Community Website Help on VMware ESXi 5 successfully moved

    Post edited by: a.p. - I also removed the answer of the office.

  • HP Proliant DL360 G6 ESXi5.0 support?

    Hello world

    I have HP Proliant DL360 G6 does ESXi5.0.Our Support plan is to add 2 HP Proliant DL360 G6 in the cluster having

    already 2 host with HP Proliant DL380 G7 model. Any problem by adding in theCluster, VMotion, HA and DRS.

    Details of the server in the Cluster currently: -.

    2 Server HP Proliant DL380 G7
    CPU Cores 8 GHz CPUsx2.665
    Processor type:-Intel Xeon E5640 CPU @2. 67 GHz

    2Server need to added in the cluster;

    HP Proliant DL360 G6
    CPU Cores 8 x 2.4 GHz processors
    Processor Intel (r) Xeon (R) CPU [email protected] GHZ type

    Any help on this will be appreciated.

    It should work perfectly with the cluster level setting the appropriate CVS (see http://kb.vmware.com/kb/1003212)

    André

  • NETWORK Intel 82567LM in ESXi5 card support

    Hi all

    I would like to build a test lab using the multiple HP 8000 CMT model (I have my reasons for that particular line). Everything seems to be OK, but I have my doubts about the 82567LM listed Integrated NIC. It is not listed in the VMware HCL, but the same I can't find 82566DM line in the list and I have a HP 7900 SFF which works very well with ESXi 5. Maybe I lack knowledge or experience with HCL, but I can't find the necessary information.

    Can someone confirm if this NETWORK card works?

    Thank you!

    Hug

    I buy the device and the NETWORK card it works very well with ESXi 5.1:

    I have add the answer maybe someone will pick up the same question in this community

    HTH,

    Hug

  • ESXi 3.5 per Incident Support

    Nobody knows what happened to the ESXI3.5 by Support Incident? -Now I see that per-incident Support for ESXi4 - that also cover ESXi3.5 systems?

    I contacted x 3 sales and nobody seems to know that answer - how to buy per Incident Support for my ESXi3.5 servers?

    Thanks in advance

    -J

    Hello

    ESX4 is the only support/license available for sale since May 21... But the license and support is valid for ESX3 so...

    Lars Liljeroth

    -

  • How to upgrade ESX4.0/ESX4.1/ESXi4.0/ESXi4.1 to ESXi5.1/ESXi5.5 versions

    Hi guys -.

    I want to update my old boxes ESX/ESXi versions ESXi5.X. Is this possible without having to reinstall ESXi5.X on the host? I've never done this before activity, please suggest. Also if I have a DRS HA enabled on these devices, should I take precautions. Thank you very much.

    Kind regards

    Could you please suggest how should I go with the upgrades?

    Use interactive Setup, look at: upgrade to VMware ESXi 5.5 using the Interactive Setup program. Insider - Articles from VMware VMware support

  • ESXi5 supports nested virtualization?

    Hi friends

    I have a requirement to install RHEL6 Guest OS on a host of ESXi5 RHEL6. Is it possible to install or do you need to change something or the ESXi5 does simply not support? I tried to install it like that and it is said that:

    Connection pooling error ' qemu: / / / system': internal error can not find the emulator suitable for x86_64.

    It is possible in VMware workstation. There is an option in the settings of the VM who: Virtualiza Inter VT-x/EPT or AMD-V/IVR

    but I could not find in ESXi5.

    Any suggestion is very grateful.

    Thank you

    Check if the below allows...

    Re: unable to boot x 64 VMs on nested ESXi host

    virtuallyGhetto: how to enable nested ESXi & other hypervisors in vSphere 5.1

  • VCA level after the Migration of ESX4.0 to ESXi5.0

    Hello!

    I have a problem (complaint) with the level of my new ESXi 5.0 Cluster under vCentre VCA 5. The VCA level is set to 'Sandy Bridge' and the four hosts in the cluster are the E5-2650 Server ProLiant DL380p Gen8 16 core processors. I think that his key to highlight that the ESXi 5 platform including vCentre server is all new material.

    Our old cluster has been ESX4.0 running on "two" DL380 G5 servers with a vCentre 4 Server (hardware)

    Using the option 'Add host' the OLD 4.0 hosts have been imported into environmental vCentre 5 without a problem and vmotione worked like a dream to all servers of old (4) News (5).

    His key to note that the two VMware infrastructure using the same back-end (San) data warehouses.

    At this point, once vmotioned, the server always had their former levels of VCA. The behavior by default and all looking good.

    So we power cycled the virtual machine. And then on their return.

    VCA level changed... for "Westmere"?

    I tried everything, but I can't get one of the servers vmotioned to the EVC 'Sandy Bridge' level?

    If I create a new template or from scratch server and starts his starts with a level of 'Sandy Bridge' CVS, but servers infrastructure of downtown ESX4 vmotioned now only go as high as "Westmere".

    I had a good glance on forums etc nothing helps?

    I appreciate the level of EVC is used only for "Enhanced Vmotion" and performance differ a lot unless you use encryption but we use encryption.

    EVCLevel.jpg

    Any help or ideas appreciated

    The VCA mode is turned on, so I suspect that there may be some inherited in the VMX files entries that affect it. Can upgrade you virtual hardware to the latest version supported by your hosts and the test of this new (including reset the CPUID mask).

    If this also fails, or you are already on the material correct version can you send a VM affected VMX file and the file in VMX to a newly created (with the same version of virtual hardware) VM.

    Another option to test if the VMX file is the cause, must cancel the registration of the virtual machine, create a new virtual machine, but fix the existing disks - this turns and check the EVC mode. But it might be easier to upgrade the virtual hardware, reset the CPUID masks, remove entries incriminated in the VMX and feed their place.

    EDIT: Of course upgraded the VM tools before the virtual material.

    See you soon,.

    Jon

    Post edited by: jrmunday

  • boot from san esxi5 support

    Start Esxi5 support from san?

    Indeed, it does:

    http://pubs.VMware.com/vSphere-50/topic/com.VMware.vSphere.storage.doc_50/GUID-2A66A330-A9E5-460B-8982-54A1B1C38C02.html

    / Rubeck

  • NFSv4 support on esxi5

    I'm currently adding datastore nfs on ESXi 5 with nfsv4, which is a failure, tried the same thing with nfsv3, which works very well, so please let me know is there a specific configuration or parameters for nfsv4?

    Hi Achoudahry,

    Welcome to the community.

    vSphere 5 does not support the nfsv4. In fact, this is not supported on 5.5 also. Maybe they will support in the near future.

  • Management ESX4.0 U4 to upgrade to ESXi5 error

    Hi all

    When scanning my two hosts for compatibility with 5.0 base line, I get an error of one of the hosts:

    "VMkernel and Service Console network interfaces share the same subnet 192.168.1.0." This configuration is not supported after upgrade. An interface must connect to the 192.168.1.0 subnet. "

    Comparing the two hosts:

    Host1: vSwitch0 - VM Network / Service Console / VMkernel

    Host2: vSwitch0 - VM Network / Service Console

    Have I reason to withdraw the VMkernel Port from this host because it does nothing (vMotion is performed on a dedicated network). I suspect that this is a legacy of something that was in place before my arrival.

    Thank you

    It is a known, after issue that the upgrade it is no more he will be migrated to the services console management port.

    • Using the wizard of sanitation, you can ignore certain warnings of upgrade analysis and force a restoration, even if the upgrade warnings are not related to third-party software
      On the ESXi 5.x Upgrade of sanitation Wizard page, you can select delete installed third-party software that is not compatible with the upgrade and continue sanitation removal of third party software installed on the host and to ensure a successful restore. By selecting the option force also Update Manager ignores three potential problems that are not related to third-party software. The following warning messages are associated with potential problems.
    • The root password is encrypted with DES encryption, causing it to be authenticated up to only 8 characters. For instructions on how to correct this, see VMware KB 1024500 at http://kb.vmware.com/kb/1024500.
    • VMkernel and Service Console network interfaces are sharing the same subnet . This configuration is not supported after upgrade. Only one interface should connect to subnet .
    • Unsupported devices found on the host.

    Workaround: before reclamation, perform the upgrade analysis and review the messages in the upgrade of Update Manager details window. Take steps recommended by the messages to ensure that remediation is successful.

    Solution
    1. This is a known behavior.
    2. Using the wizard of sanitation, the user can ignore certain warnings of upgrade analysis and force a restoration, even if the upgrade warnings are not related to third-party software.
    3. On the ESXi 5.x Upgrade page of the wizard of sanitation, user can select remove installed third-party software that are not compatible with the upgrade and continue the reorganization of removing third-party software installed on the host and to ensure a successful restore.
    4. By selecting the option force also Update Manager ignores three potential problems that are not related to third-party softwar

    See the release notes:

    http://www.VMware.com/support/vsphere5/doc/vSphere-Update-Manager-50-release-notes.html

  • VMS with VMware Tools ESXi5 works for host ESX4.1?

    Hello

    Just upgraded a 4.1 ESX host to ESXi 5 host in a Cluster of 3 armies.

    We observe that VMware tools running obsolete for the virtual machines on the host ESXi5.  We would like to know if we apply the latest VMWare tools on those virtual machines, they run correctly when they are transferred to ESX 4.1 hosts?

    Thank you

    VMware Tools version 5.0 is compatiable on 4.x, but the virtual hardware version 8 is NOT compatible on 4.x

    Se see page 3 what 's new

  • Support of different material in ESX4?

    Is it possible to add another server to an existing configuration of the data center? That means, if you use two ESX host servers that are configured with the same processors, memory and hard drives to add a new server with a material different spces a 3rd home? For some reason, I thought it was a new feature of ESX4?

    Hope, I wrote this well enough... Thanks in advance

    Unless you have VMotion, just do not pay attention to the CPU familes.

    ---

    VMware vExpert 2009

    http://blog.vadmin.ru

  • ACS VM 5.2 ESXi 4-ESXi5

    Hello.

    My client as agreed at the servers virtualized in ESXi5, the problem is that the ACS5.2 has been installed in ESXi4.

    Is there any question connects to the migration of the CSA installed 5.2 in ESXi4 to ESXi5?

    The procedure to follow?

    Thank you

    Antero Vasconcelos

    Hello Antero,

    ACS 5.2/5.3 can't ESXi 5.0. It seems that ESXi 5.0 support for versions 5.x ACS will be included on the version 5.4 of the ACS. However, I am not aware of the release of GBA 5.4 ETA.

    As ESXi 5.0 is not a supported platform / tested for ACS 5.x, you may experience bad behaviors on the application itself.

    We have seen ACS 5.3 running on ESXi 5.0 without any problem on a lab environment, however, if a problem arises and a support ticket is necessary, Cisco TAC will always respect the fact that we run that demand for ACS in the specifications supported listed on the product release notes and installation guides.

    I hope this helps.

    Kind regards.

  • Cisco support for third party on SRE applications?

    Hi - I think about some applications of unified communications to third parties under VMWare ESXi5 running on a Cisco SRE 900 module.   According to the docs Cisco, 3rd party apps are supported on these modules (see table below), but the app in question is NOT on the list of Cisco below.

    http://www.Cisco.com/en/us/prod/collateral/modules/ps10598/data_sheet_c78-553913.html

    A few questions:

    1. until the third-party application is able to run under VMWare/VSphere ESXi5, is there anything on the SRE which could prevent you from running this third-party application even if it is not on the list of Cisco?

    2. What is the policy on the use of third-party applications that are not on their list of Cisco?    For example, they will be a call for support on the SRE running an unlisted application (I do not expect to help me with the app, but I don't want to cancel any kind of support contract through the use of a third-party application not on their list).

    Thank you!

    As long as 3rd party soft is able to run on ESXi 5 he would go on the SRE material. Cisco does not prevent these applications from running even if they are competitive. Support perspective that Cisco TAC will not take any support calls for these applications nor would know how to redirect the call to these 3rd party partners. Cisco TAC supports only SRE and ESXi related issues.

Maybe you are looking for

  • Reminders app - update.quota_exceeded

    Hello I'm having a problem with apple app reminders 1st in mac app reminders - I tried to move 50 reminders in 1 list-seems to work ok but does not appear on the iPhone - when I try to move a reminder in 1 list to the other - it syncs on other device

  • Import the Favorites folder in my pc to your Favorites

    I downloaded my favorites of internet explore to a folder in my computer. How can I add to bookmarks in Firefox.

  • I do not have the iCloud that my iPhone make up the second hand, and the shop do not account

    I buy second hand, and I need the password of the iCloud I can do?

  • Opening jpeg files opens word instead

    When I try to open images in my pictures Microsoft Word opens and the photos are not displayed. I have stopped to get the open with dialog box when the transfer to SD card on my hard drive, which is the problem and if so how do I Diego it?

  • Class 0 SMS

    Hi all We have an application that communicates with a server via SMS. Those who are sent by the server are class 0 SMS, aka SMSs. flash on mobile device Application treats them correctly, but they are always displayed to the user. Are there ways to