RH8 numbering issues more

Hello world

With RH8 I have so far been able (with help from the Forum and the site of Peter Grainge) to create new paragraphs bleachers that can number consecutively, even when the other paragraphs are placed between the two. Fine so far. Now, I would like to know how to be able to re - start the numbering further down the page so if I have multiple procedures in the same section.

For example

Item - Procedure 1

1 text text text

2 text text

3 etc.

Heading - inner 2

1. text

2 text

3. the text etc.

Item - Procedure 3

etc etc.

When I used framemaker previously, that I used to create a paragraph of stepfirst style which still had 1, later stage paragraphs numbered following the first step. As well as this could interrupt the sequence of the harmful effects of paragraphs withoput. It's a bit what I have in mind, but I don't know how to code the numbering of the relevant dialog RH8.

Any ideas would be greatly appreciated...

I won't counsel you must use what some people have had problems. What I'm saying, it's that it's what this feature was intended to be so see if it works for you.

There is more on the page of the list at http://www.grainge.org/pages/authoring/rh_tour/index.htm

See www.grainge.org for creating tips and RoboHelp

Tags: Adobe

Similar Questions

  • SPA9000 numbering issues.

    Hello world

    I am installing a SPA9000 / SPA400 phone solution with 6 SPA942 extensions.  I got all the boxes, connected to the network and I can set up the units via the wizard or the web interface.  My problem is that for some reason that I can't compose between extensions (my extensions are 101 to 106).  I got this job all previously to the title of the version 5 firmware, but I've updated the SPA9000 to ensure that I get 6 extensions to work.  I have factory reset everything several times and configured it according to the guidelines from the Wizard (2.1.0.0) following the PDF document Wizard.  If I pick up the phone and try to dial another extension, as soon as I press the first digit (1 in this case), he stands up and says invalid number.  To me, it seems that the Dial Plan Wizard is not correct.

    The default dial plan generated looks like this:

    (<*97:vmm>| [0000], 000 S 0. [0000], 106S 0. [0000] 1 [38] xxxxxxxxS0 | [0000], 13 [1-9] xxxS0 | [0000] 1 [9] xxxxxxxxS0 | [0000], 0 [23478] xxxxxxxxS0 | xxxxxxxS0 [0000], [2-9] | ([0000], 0011xxx.)

    Having said all that I can go to the corporate directory on the phone and there is an entry for the configured item numbers and if I select I get the same result, but at the end of the directory entered to phone 1, phone 2, etc. (names I assigned for phones), and these choices actually compose the other extensions.  Very strange

    I'm setting up the system for use in Australia.

    Any suggestions?

    check the dial on the phones themselves plan and ensure that they have the same as on the SPA9000 dial plan. announced just a xx. at the end of the dial plan syntax so that you can dial any number as well.

  • with programs activation issues more old/legacy.  Photoshop CS

    Hello everyone, I'm somehow out of touch with a large number of programs, but would like some suggestions please.  I have Photoshop CS (Yes that one), I have not used the program for a long time, but received a work of art done in Photoshop, I am now responsible for support.

    issue 1, registriaon, this product wants to go online to register, of course, the links are long gone, as well as phone activation... I have my AdobeID account and that you have manually added the serial number on my profile.  Yet when I run the software, he wants to sign up or give me the option to continue without.

    2nd question, probably related to the fact the cards are created in a newer version of PS, are following error messages

    Unknown data was encountered reading layer "copy" and it will be ignored.  Continue?

    OK Cancel reading composite data

    -I choose, OK then the Activation popup

    choose to continue without activation, then

    For Photoshop CS color settings will be configured by using the default settings

    You want to customize you color settings now?  You can choose edition > settings to customize the color later.

    Please feel free to yell at me that my knowledge of Photoshop is null because it is something that I'm just work.

    Thank you for your time

    There is no server available for CS2 activation and older products.  For CS1/CS2, you can take advantage of the special version of CS2 which is made available.  You can read about it and he acquire through the following links...

    CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.

    l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

    https://helpx.Adobe.com/Creative-Suite/KB/CS2-product-downloads.html

    Another thing, you might want to consider if this is a short-term project... Download and install one of the latest test version - you can use it for 30 days.  If necessary, you can download other (different).  For the following...

    Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

    CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

    CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

    CS5.5: http://prodesigntools.com/adobe-cs5-5-direct-download-links.html

    CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

  • Bike Turbo G: home button and right does not, without quick settings and issues more

    My bike Turbo G suddenly crashed last night, while I was working with Photos of Google. The phone is about 1 month, purchased from Flipkart. Here are the questions that have emerged all of a sudden:

    1. No function button Home and the right button. They do not work.
    2. No quick drop-down settings menu. All of a sudden is not working.
    3. Cannot transfer from phone to computer I choose is no longer the option to transfer files. (no menu drop-down)
    4. No notification.
    5. Camera twist-gesture does not.
    6. Flashlight chopping gesture does not.
    7. No lock screen.
    8. Option not available factory reset. Reset the phone option is grayed out.

    Tried Recovery Mode (power + flight to the down button, then flight Power + up button) but the problems are still there.

    While Googling found that other users have had the same problems.

    What is the solution? Help, please!

    This happens when the system: OS crashes. U go to Recovery Mode and then choose Wipe Cache partition and after wiping Cache Partition, choose the device to reboot.

    Wipe Cache partition will delete your personal files or anything like that. Erase all dump and error and cache generated by the Android operating system.

    I hope that it is surely help you.

  • ThinkPad Edge E520, paved digital / numbers issues

    5, 4, 2, 1, 0 and enter digital button on the digital pad Lenovo itself works only half the time (sometimes it works, sometimes it doesn't).

    When I use an external keyboard, there are no problems.

    I just got this computer about 2 weeks ago too.

    @FrankyG,

    Check out this clip. E420 and E520 has the same built.

    http://www.lenovoservicetraining.com/ion/E420/

    Manual of Maintenance of equipment for E520.

    http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-77264

    JMT

  • Select the five digits (or more) column varchar2 numbers

    Hi all

    I've got varchar2 column, it consists of different text, numbers, spaces, commas, etc.
    My need is to choose only five-digit numbers (or more).

    For example: 251 or 2512 is not what I need.
    25123 or 251234 or 2512345... is what I need.

    How can I make it?

    Something like...

    select regexp_substr(txt, '[0-9]{5,}') as fivedigs
    from tablename
    
  • continue the numbering after extract - it still restarts.

    RH8 HTML

    Hi all.

    I have several themes that use the same 5 steps in a process, that I put in a code snippet, and then add several numbered steps more to the list that are specific to this topic.

    I want the additional steps that are not part of the extract of continue numbering. for now, I have the 5 steps numbered in the extract and additional specific steps for each topic restart at 1, rather than continue to 6.

    for example.

    1 go to search

    2. Enter your text

    3. Select your criteria

    4 Select the...

    5 click search.

    1 of the window... click... - This step is a continuation of the previous 5 but numbering does not, on the contrary, it restarts.

    Is it possible to continue the numbering from a snippet?

    Thank you.

    Nick

    The only way to achieve this is to restart the numbering of the item in the list after the code snippet in the required number. You can submit a feature request for it.

  • Australian Dictionary "works" not more. RMB

    Folks, I'm a BAD speller.

    I installed the Australian Dictionary. No problems.

    Recently, when I get a word bad spelled and I RMB on it, basically anything in the Clipboard is pasted there.

    Uh, why?
    Sign up for

    RMB actually seems to stick, then maybe that's not a problem with FF. Sorry people.

    I will look into the issue more myself, but I'm wanting to cover all my bases.

    Among the optional features of FastestFox is automatically paste on the right click. Can you check to make sure that was not turned on? If there is no entry toolbar or a menu for FastestFox, try here:

    Firefox orange (or the Tools menu) button > addons > Extensions category > button 'Options' for FastestFox

  • Numbers no longer italic characters on-screen displays.  (See my first comment for cont.)

    Numbers displayed more italics to the screen for me.  Why?  I'm just today, via the AppStore, the more recent version of the numbers.  It's frustrating.  Previous version stopped showing cuts in italics of cells for me maybe 3 months ago?  And now the new version of numbers that I received does NOT correct the problem...  (Also, I have version very MOSX.)  That is what it is?  Italic is more "supported" on the numbers?

    Perhaps you could provide some examples and some screenshots showing that italicize controls do not exist, or that they are available, but have no effect.  You may be using a font that does not support the italics.

    I can tell you that I am able to format a cell using italics and can not confirm your assertion that they do not work:

    No italics:

    Italic:

    just to make sure that we use the same controls, I suggest using the text formatter:

    In this case, you can see that I've been using the font "Helvetica".

    Check and see if this happens in an existing document or a new document.

    Display specific details as much as you can.  In addition, you can send the document complained to me using e-mail in the bio of my profile.

  • iCloud Web site usability massive issues - is - this compatible?

    I can't use at all iCloud.com in Firefox. From the quick connection there is a lot of questions. In the e-mail field, you cannot use Tab to move to the password field, only the mouse. In the password field, you don't see the "eye" icon to show the password (IE only?) and can't use the clickable arrow to continue, enter only. Once connected, you can click on icons such as mail or calendar, but not using '? ' in the corner. From inside all services (Messaging, reminders, etc.) you lose complete control of the any buttons, options, scrolling menus - everything. Back on the website (iCloud icon) button does not, forcing you to use the back button of the browser. By clicking on any other service presents the same questions - absolutely nothing is usable, clickable or scrollable. It seems that Javascript does not completely - but it's an uneducated assumption in the dark.

    This product on 64-bit Windows 8 beta Firefox 18/19. I went through several troubleshooting steps and it made no difference in the slightest. I have cleared all caches several times, from inside Firefox and 3rd party utilities. Tested Mode safe, nothing helps. Manually deleted several add-ons, checked all modules are completely up-to-date (as always) and reset all the settings of Firefox by default (except hardware acceleration causing graphics problems in 8 - does not help iCloud.com enabled, however). It works perfectly in all browsers with similar modules without problem. I have a full, complete reset and remove profile - what is planned. However, I have a feeling that is not the issue. I did a clean install of Windows 8 and a clean install of Firefox less than 2 weeks ago.

    I can be rushed in the choice of a solution - I'm not sure if it works for everyone. I have not been able to recreate this issue more in beta of Firefox 18.0.1-19 3. It was to be corrected in 18.0.1 or had a problem with 3rd party software. The thing is, I'm the only user on my computer and I know EXACTLY what has been installed or updated. It is has not been updated Windows since the January Patch Tuesday, and I tried several times since then with no luck (up to Beta 3).

    Decommissioning of the Beta 3 of 18.0.1 I did not a clean install. I did a clean install with profile completely removed and everything in the previous tests, and it did not help the cause.

    Basically, I'm completely puzzled as to why all of a sudden, he started to work when the Beta 3 is the only thing that's changed (I checked the Windows updates and installs for all restore points - nothing has changed since the "Patch Tuesday" - I have no day of the plugins for Firefox, but they never affected this bug even when disabled or active). It is strange that decommissioning did not reintroduce the bug, as I already had it in 18.0.1. So far, as far as I know still once did labour in 19 Beta 3.

    It could have been something simply fixed on Apple's site as well. That would explain why it works in 18-19 suddenly - when nothing else has ever done a lick of difference. I hope someone else can confirm that it's started to work for them as well!

  • CA CERT_E_UNTRUSTEDROOT on the issue of the licence

    Hi all

    I need to issue a certificate using a root certification authority policy.inf business Windows Server R2 2012.

    I connected the CA with HSM and created the template for cert is issued, such as getting the HSM KSP provider.

    I can issue some certificates already very well with the GUI model, but I tried from policy.inf:

    [Version]
    Signature = ' NT $Windows $.

    [NewRequest]
    Object = 'C = SG, O = Ezlink, CN = test-Server'
    HashAlgorithm = SHA256
    KeyAlgorithm = RSA
    KeyLength = 2048
    ProviderName = "Safenet Key Storage Provider.
    KeyUsage = 0xa0
    MachineKeySet = TRUE

    [RequestAttributes]
    CertificateTemplate = ComputerHSM

    Then when I submit, I get this error:

    RequestId: 13
    RequestId: "13".
    Certificate issued not (denied) error of construction or a certificate Publishing c
    ESTAMP chain processed, but finished in a root certificate which is not very
    Usted by the trust provider. 0X800B0109 (-2146762487 CERT_E_UNTRUSTEDROOT)
    Certificate request processor: A chain of certificates processed, but completed in
    a root certificate which is not approved by the trust provider. 0x800B0109 (-2146
    762487 CERT_E_UNTRUSTEDROOT)
    Error of construction or publishing certificate

    Subsequently, I can't issue more cert even with a graphical interface. Any guidance would be greatly appreciated, thank you kindly,

    LOTRCA

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    See you soon.

  • HP Envy 15 (PM55) iTunes sync issue

    I waited for weeks, and again, there were no updated BIOS for my HP Envy 15 (15-1011TX) that addresses this issue.  I currently use the version of BIOS F.05A.

    Gigabyte has released the fix in the BIOS there are almost three weeks and Asus released their dose about two weeks ago.  I really want to get an estimated time when HP's out their.

    The plu HP expected to examine this issue more people will choose other manufacturers who have already released the BIOS fix.

    . The BIOS is finally OUT!  (F.07) and it solved the problem.  Although it is not always updated on the download page for the moment.

    FTP://ftp.HP.com/pub/SoftPaq/sp46501-47000/sp46761.exe

  • Genuine Windows 7 issue

    I get the below error

    The system has been tampered with. 0xC004D301. Please suggest

    HOW the system has been tampered with?

    MGA Diagnostic Report:

    To analyze and solve problems for Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to the desktop -http://go.microsoft.com/fwlink/?linkid=52012 )

    Once downloaded, run the tool.
    Click on the button continue, after a short time, continue button will change to a copy button.
    Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message.

    One issue per thread:

    Activation and Validation issues more look the same on the surface, but can have many different causes and bugs. This is why we ask a diagnostic report and it is also why we are asking that you create your own thread for your question (in other words, do not post your question in another thread).

    It is simply too complicated to try to resolve the multiple problems in the same thread.


    Instructions of Ressik Kamin
  • How to choose the more int?

    Hi, I have a code creating 5 random integers between 1 and 100. Y at - it an easy way to choose the most high these numbers and more giant yew statements? Thanks for any help!

    You could always sort and take the end. You will need to create a new object table however.

    http://www.BlackBerry.com/developers/docs/5.0.0api/NET/rim/device/API/util/arrays.html#sort (int [], i...

  • Remove unnecessary characters, space and channel numbers

    Oracle 11.2.0.1

    Windows

    I have data from the table like this:

    David Parker

    Robert Josh

    Hick 1/4

    John ' Fowler

    Bill.Gates

    Herman Patrick «»

    Andrew % Clark

    I want to delete all the numbers, special characters, more than one space between the words and make the correct name.  How can I remove extra characters from string.

    In fact, we get data that has sometimes special characters, including numbers and more spaces in name and it still creates a bad output query.

    Thank you.

    Or...

    SQL > t

    2 ALSO (SELECT "David Parker' DOUBLE str")

    3 UNION ALL

    4. SELECT 'Robert Josh' DOUBLE

    5. ANY TRADE UNION

    6. SELECT ' Hick' 1/4 OF the DOUBLE

    7 UNION ALL

    8. SELECT q ' [John 'Fowler'] ' FROM DUAL

    9 UNION ALL

    10. SELECT 'Bill.Gates' FROM DUAL

    11 UNION ALL

    12. SELECT q'[Herman 'Patrick']' FROM DUAL

    13 UNION ALL

    14 SELECT q'[Andrew % Clark]' FROM DUAL)

    15 SELECT regexp_replace (str, "[^ A-Za-z] + ',' '") final_str

    16 FROM t

    17.

    FINAL_STR

    -----------------------------------------------------------

    David Parker

    Robert Josh

    Hick

    John Fowler

    Bill Gates

    Herman Patrick

    Andrew Clark

    7 selected lines.

    SQL >

Maybe you are looking for

  • How to import the password html file in Firefox in win7-

    I exported the password in an HTML file in firefox on a PC with XP SP3. I can't find where to import them into firefox on my new Win7 PC.

  • Satellite Pro A200: RIS installation fails - BSOD

    Hello Someone has already tried to use RIS for laptops Satellite Pro A200 ETA-1 image. I'm getting a BSOD which I think is due to a bad driver (downloaded from the Toshiba site). Also, can someone tell me where I can find a telephone number for techn

  • "Err" or a message while trying to recover... Help!

    I have another question.I was doing with the HP discs recovery. Everything seemed to go well. He was downloading a bunch of applications on the computer. Restarted several times. My office has increased. Looked like it was going to work.Then it reboo

  • Jet 7 and backup Macrium

    I downloaded the program to backup/restore of Macrium reflect 32 bits to the HP Jet 7.  I created the DVD of recovery without problems.  I changed the boot sequence of the BIOS on the 7 of streams have started look first on the CD/DVD drive.  However

  • Acer Aspire v3 - 572 g suddenly low fps

    Hello Since yesterday evening, I experienced a permanent drop in fps in all games I play (for example, CS etc.). Not even a fps drops in some of the older titles, which should not have any problems whatsoever. It was not caused by a windows update, s