right click on "Devices and Interfaces" does nothing
Hey all,.
I am trying to add a raw TCP VISA OR max socket. When I right click on "Devices and Interfaces", the line is highlighted and any drop-down list appears, much like a left click. However, when I right click on 'Software', the drop-down list appears. I have all the software AND up-to-date. Is there additional software, that I should add (I NI-VISA 5.4 as well as the watering duration) visa?
Thank you
Matt
I think I know what is happening. It seems that you have just the duration of OR-installed VISA, but not the NI-VISA full supports, which includes additional support of MAX configuration.
With the new version of MAX 5.5, devices will appear with the help of configuration limited when you have only the version of the installed driver running as opposed to in the past when nothing arise.
Here is a link to the full installer 5.4 NI-VISA - http://joule.ni.com/nidu/cds/view/p/id/4230/lang/en
Tags: NI Hardware
Similar Questions
-
I click on "Download trial" and it does nothing?
I click on "Download trial" and it does nothing?
We do not know anything. Call your vague post would be an understatement. Information system? Browser? Installation of the Internet? As a first step, refer to this:
Direct download links for Adobe software
Mylenium
-
MAX does not list the devices and Interfaces in the tree
When I open MAX, the tree displays only software in my system. I'm trying to access the devices and Interfaces, that should be included in the tree as well as a number of other elements. I've attached a screenshot of what I see. Why everything is not listed, and how can I solve this problem?
Spuleio,
You won't see if device drivers are not installed. Notice the button in the example that says "Open VISA Test Panel"? VISA is loaded with device drivers OR. You can find the drivers here. If you want just the VISA, I think you might be able to find it here. But, in both cases, NEITHER needs a way to talk to the port, hence the need for the driver.
Cheers, Matt
-
Sony VGN-AW41ZF "devices and printers" does not display anything, but they work
devices and printers doesn't ' display anything, although all devices work.
The reinstallation of the computer (sony VGN-AW41ZF) and add the devices, they have been posted.
Later, we don't know why, "devices and printers" display nothing.
Just added a scanner, no problem, but once again not displayed.
Now add bluetooth devices does not work. My sony bluetooth mouse, I installed before the problem and it still works
Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.
And make sure that Windows is up-to-date with the latest Service Pack.
See you soon.
Mick Murphy - Microsoft partner
-
devices and printers does not display the correct information of device or the icon
I click on devices and printers and of course my devices and printers all appear, however, the device appears to my computer shows in the information window which is a Tablet instead of a desktop PC, the model number is incorrect and also the icon as well. How can I fix this.
Same question here.
Solved with this microsoft hotfix to formIt turns into the right device and realistic icon -
Right-click DeptEmp.jsf and select run from the context menu
Hello
Please consider article Oracle Magazine "Catch Me If You Can ' Frank Nimphius
at http://www.oracle.com/technetwork/issue-archive/2013/13-mar/o23adf-1897193.html
In the article, it is offered several times to
«... Right-click DeptEmp.jsf and select run from the context menu...'.»
When you use JDeveloper 11.1.2.3.0 it will result in JDeveloper starting a browser requesting a URL "/ faces/DeptEmp" (without ".jsf").
(Note that in the sample adfc - config.xml has a view with the id "DeptEmp" activity, but for pages without an activity view corresponding to the stream of unrelated task (adfc-config.) (Xml) JDeveloper starts a browser requesting a "/ faces/otherPage.jsf" URL (with ".jsf").)
Still, I wonder if we should really run (JSF) pages, or rather an activity view in the flow of a task?
After running into issues with calling (JSF) page URL rather than controller unbounded ADF task flows view activity URL in another forum thread [1], I try to avoid pages (JSF) (execution of the task-flow unlimited instead) running.
toJohn Stegeman wrote:
But also the Oracle documentation seems to suggest that page running a (JSF) is the way to go (or "a" way to go), see the section "41.2.1 how to run an Application in Integrated WebLogic Server "
... especially since it is very common for people new FAD (and indeed no-so-news-to-ADF people like me) to run their app via a page rather than the workflow and then wonder why it does not work :)...
saying: ""in the navigation Application, select the project, a task flows, JSF page or file as the target execution. ".
at http://docs.oracle.com/cd/E37975_01/web.111240/e16182/deployment_topics.htm#ADFFD22047
So, who is? Is there a preferred way to run? Running a (JSF) page "also recommended"?
-[1] ' login after logout is not possible using af: commandButton.
during the connection after disconnection is not possible using af: commandButton
Thank you very much
Jan VerveckenHello
Still, I wonder if we should really run (JSF) pages, or rather an activity view in the flow of a task?
The recommendation is to run the activity. I think it's just my laziness to boot from the JSF file in the case of the article (and given my article only has a single page in the workflow unlimited I wonder if my attempt failed, if there was a need for a navigation to another view in the flow of unlimited work). The risk from a page directly, it is a physical implementation of a view that could be used by multiple streams of different tasks (although the common use of the stubborn workflow is to go with fragments of the page, always bounded task flows could be defined using complete documents). His recommendation that you start an activity to view pages in order to ensure the ADFc is used (I wasn't even not aware of 11.2.3 to automatically change request activity instead of the file if there is an activity of referencing).
Frank
-
No devices and Interface in MAX
Hi all
I recently installed the evaluation version of LabVIEW and I try to communicate with a dynamometer of Mark-10 series 5. The problem, however, is that MAX doesn't detect the device or any other instrument. It's not even a tree device and Interface.
I am running Windows 7 and Mark-10 drivers are installed (and is detected by the device as a USB Device Manager).
Someone has an idea of what could be the problem?
And how are you trying to communicate with the hardware, GPIB, serial, usb, TCP/IP,...? Did you install NI-VISA is there and equipment driver provided by the manufacturer?
Note: MAX shows not only with products OR.
Ben64
-
Hi - Have cRIO
Can someone help me get the NI 9871 (Scan Interface) work? My two 9477 and two 9425 and 9403, function with the scanning Interface. In MAX > software > NOR-Serial RT 3.82 > NOR-Serial 9870 and Scan Engine Suport 3.8.2 9871 BUT NOT == MAX > devices and Interfaces > series & parallel = number of Ports Com for 9871 listed? Project, 4-port RS-485 NI 9871 is in slot1? Any help appreciated thanks
the serial ports on the NI 9871 also appear in MAX with serial ports integrated target under devices and Interfaces
NEITHER 9871 (Scan Interface)
I left the Slot 1 Slot 8 9871 Know works and MAX displays 4 COM ports. Something is misconfigured in Slot1?
Solved!
Thank you
-
Why can't the PCI 6040E under devices and Interfaces
Hello!
I intend to use a PCI 6040 E connected to a BNC 2010 to measure 3 different voltages as an entry. I installed the mx of NOR-DAQ 9.7.5 on windows 7 (64-bit). My question is why I can't see my devices under the "devices and Interfaces? even by Labview, DAQ assistant, acquire the signal, anaolge of entry... I can't configure the devices of this error: no supported devices found.
Any idea? Thank you
You're going the wrong way. The latest version of DAQmx that supports PCI-6040 is 9.5.1. See this article for more information: OR-DAQmx and NOR-DAQ Driver Support: PCI/PXI devices. And LabVIEW 2011 is the latest version of LabVIEW that supports DAQmx 9.5.1.
-
Devices and interfaces-identify unknown?
Hi all
I have a question about the value of 'Identification' listed in devices and Interfaces of MAX. I use MAX version 4.7.4f0. Here is the exact location of my question: MAX, devices and Interfaces, x, attributes, identification Instrument.
I have several devices installed, all devices except my Krohn-Hite 526 have the info of the device in the "Identification" section
example: Agilent, 3240...
Krohn-Hite has * IDN? yBy (?)
I don't know if it could be an installation problem?
See attachment for screenshot
I needed to "Scan for Instruments inside MAX.» Interestingly, it was that I still had full control over the unit of the LV and TS?
-
Why 'Device and Interface' lack of tree MAX Config?
I am trying to integrate a range of LeCroy WS64MXs with LabView, but no luck so far. In the measurement and Automation Explorer program, there is no worksheet named "Devices and Interfaces" in the configuration tree. All I have is 'My system-> software' and 'remote systems. Max version 4.5.0f0. This sheet should be there by default and if not, how it added to the tree?
-
D820 and I woke up and I'm going to turn on my dell and it does nothing.
Hello
I have a dell latitude D820 and I woke up and I'll turn on my dell and it does nothing. I plug the charger in and go to plug in on my laptop charger port and my charger all I blink (my charger has a green light when I plug it in), thanks
UH I think you need to contact Dell...
-
I have recently installed Windows 10 on my machine (upgrade to 8.1)
The "print" button does absolutely NOTHING. A printer NOT FOUND of error occurs when I try to get a preview of the message.All of the suggestions.
the configuration editor allows you to change the entries in print.printer to the default values * right click and reset
-
Right-click menu that is displayed does not correctly
I use firefox 17.0.9 ESR and extended display Windows, I have two screens, one is on 1440 x 900 and the other on 1920 x 1080, if I right click anywhere on the browser when it is on the small screen, everything works as expected, if I pass the browser to the bigger screen and click right I sometimes the menu Sometimes it shows and hide immediately and sometimes just won't show, if I move the mouse on the menu it shows yet once and then hides, this only happens when I move the browser to the larger screen
Hello, this is perhaps a problem with hardware acceleration - please try to update your video driveror where this does not solve the problem, or there is no new version available at the time, disable hardware acceleration in firefox > options > advanced > General.
-
Right-click on the file properties does not not work or opening
When I right click on a file or folder and then drag the cursor to the "Properties" section, nothing happens when a click to open it. What can I do to fix this?
Hello
· This happens with some files or all files?
· What kind of file is it?
· Since when are you facing this problem?
· Remember to make changes to the system?
· What happens when you click on the file properties? You get the error message?
· You are able to access the propertied file in safe mode?
Method 1:
Step 1:
I suggest you to check in safe mode if you are able to access properties of files. Follow the steps mentioned below to start in safe mode.
a. restart the computer and keep tapping F8 until you reach the start menu.
b. Select safe mode from the boot menu and press ENTER.
c. right-click on the file and check if you're able to access the properties.
If you are able to access the properties then I suggest you do a clean boot and check. Follow step 2.
Step 2:
Perform a clean boot and see if the problem is resolved.
Follow the steps mentioned in the article given below to configure the system to boot.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: Once you have finished installing, follow step 7 article to start the normal start
Method 2:
I suggest you to do a scan of the SFC. File system (CFS) Auditor verifies that all Windows 7 system files are where they should be as they are by default and not corrupted, changed or damaged.
a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
b. click on continue or provide administrator credentials if prompted.
c. in the type in the following command prompt window and press ENTER:
sfc/scannow
d. you should see the following message on the screen:
§ Begin the analysis of the system. This process will take time.
§ Beginning verification phase of system scan.
e. audit % complete.
f. once the scan is complete, a test to see if the problem you are experiencing is resolved or not.
For more information, see the article mentioned below.
http://support.Microsoft.com/kb/929833
Method 3:
Check in the new user account, you are able to open the file properties. Follow the steps mentioned in the article below.
Create a user account
http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit ourMicrosoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Locked BIOS 3 attempts system 63866252 returns disabled No codes forum I found work. Help, please. Thank you!
-
HP Envy TouchSmart j003TX Beats Audio not work
I recently my phone drivers and bios updated the software updated, HP Support Assistant, because I've upgraded to Windows 8.1. Suddenly, my laptop goes to a BSOD whenever I play games like Crysis 3, etc. I discovered that the problem was on the new I
-
Even if I use safari just, the battery dies quickly
Salvation; I have the macbook air, OS x El Captain.I am using safari just and battery is 70% but it says 04:52 min. Also, sometimes I can easily see the battery consume %5 in 10 min. Does anyone have suggestions on what do I do?
-
EliteBook 840 and GNSS HP sensor
I tried for days to get a solution by satellite, using the store GPS satellites, without a bit of luck. Sensor GNSS HP and Windows location Services are activated. The news I just, sometimes, are reading of Altitude, but not natural satellite and no
-
C4480 scan problem after installation of Snow Leapard
I can't scan using C4480 printer after installing Snow Leapard. When I try to print message pops up saying communication error. How can I solve this problem quickly.