Right server - development tests

Hello

We are developing a new version of an existing application of DPS, using AEM.

Ideally, we would like to use the same law server which is running on the DPS version and launch the version AEM of the application to run in parallel with the existing DPS - one with the DPS actually become a version of the archive, the version of the MEA, taking advantage of the new features.

I've been through (I think) to be the correct steps during the generation of the MEA, but in the development version of the implementation of the MEA, when you try to connect to an account of payment, via line 'Account', I can enter all the details and they allow a connection.

Is this something to be expected in a development version, or have I missed something in the approach configuration?

API version must be correct - is there a major difference for setting this up vs DPS?

Any guidance greatly appreciated.

Thank you, Tom.

AEM Mobile uses the same Direct right v2 API that uses the DPS. However, if your DPS law services uses the DPS-specific features, such as folio names or specific DPS account ID, the service of law won't work for AEM Mobile. You need to change the configuration. For example, you must use the product instead of the names of folio ID. See the following articles for more information:

Establish the right to MEA Mobile apps

Use the API of Services On-Demand collection of access and details of the product for AEM Mobile

As for the ability to go into the details to connect, this behavior doesn't seem right. I'll ask around.

Tags: Experience Manager Mobile

Similar Questions

  • How to find the right server to use windowsmail to send and receive e-mails?

    How to find the right server to use windowsmail to send and receive e-mails?

    Who is your current e-mail server? (Which is after the @ in your address).
     
  • All DPS (mutifolio + right server) App and the AppStore approval

    Hello

    We are building a Mutlifolio + right asks to be distributed free of charge, via the Apple AppStore.

    When getting the app, customers without username/password did not able to see folios until they get the appropriate credentials.

    In this case the folios are forthcoming "Retail" to be managed by the right (right) Server?

    What do I need to create purchase inApp in this application, even though the folios to share are free?

    Thank you

    If you don't want any what folios visible until the user logs then don't set up any in-app purchases in iTunes. Folios will remain hidden until the Player connects. Do not publish folios retail and non-free, producer of Folio.

    Neil

  • Cheap construction and Simple Home ESXi Server to test

    I think building a desktop computer (you can call it home server) for VMware vSphere Hypervisor to test at home for educational purposes.  I am currently using a > 6 yr old Dell laptop which does not support VMware vSphere hypervisor.  I have no luck in my workplace to have hands on VMware.  Course VCP5 is expensive here in Malaysia, about 3 times salary for a fresh grad. If you have savings of 1/3, should be save to just sign up for the course of 9 months.  Also I would need to take leave of 5 days on the course, they have no weekend class.

    My plan is to set up for lab test (VCP5 test) and possibly configure 4 virtual machines.  What are the best way to build that ESXi server to test?

    Processor - AMD FX-6100

    http://www.Newegg.com/product/product.aspx?item=N82E16819103962

    Motherboard - ASRock 960GM/U3S3 FX [Micro-ATX]

    http://www.Newegg.com/product/product.aspx?item=N82E16813157323

    RAM - 16 GB (2 x 8 GB) 240 - Pin DDR3 SDRAM DDR3 1600 (PC3 12800)

    http://www.Newegg.com/product/product.aspx?item=N82E16820231606

    Adapter - Realtek 8111E (shipped with Mobo)

    HARD drive - WD Green WD10EZRX 1 TB IntelliPower (do not plan for any RAID installation)

    http://www.Newegg.com/product/product.aspx?item=N82E16822236070

    Box - COOLER MASTER Centurion 5

    http://www.Newegg.com/product/product.aspx?item=N82E16811119068

    Power - COOLER MASTER eXtreme Power Plus 500W or COOLER MASTER GX 450W RS450

    I have experince in the building of my own office back in the years of the pentium - pentium 4.  But I certainly have no experience in the construction of a system as complicated as, I am a total newbie to VMware.  I need your need help and tips to avoid buying machines bad for my setup.

    my budget would be RM3000, which is about USD1000. (Now I think I can get USD600 below after opt for AMD on Intel Core i7)

    Thank you

    * Some links that I found

    Hardware configuration

    http://wahlnetwork.com/2012/03/13/building-ESXi-5-whitebox-home-lab-servers/

    http://vdestination.com/2011/01/19/building-a-home-lab-101/

    Configuration (configure lab environment, do not apply to me)

    http://professionalvmware.com/2012/05/vSphere-5-autolab/

    http://www.simple-talk.com/sysadmin/virtualization/VMware-Lab-Setup---a-virtualized-lab-for-testing-HA-and-DRS/

    http://www.VMwarevideos.com/video-my-home-VMware-vSphere-lab

    You don't need a San to install ESXi, but if it's under consideration for the VCP that a SAN would be beneficial, as would a second host ESXi - in this way you will be able to test vMotion, DRS, HA-

  • I can not configure a server to test DreamWewaver CS6.

    My problem is this: I create a Web site in which the vast majority of the pages and files that forms are made in PHP. When I set up a test server on my computer (for the moment can not be anywhere else), to indicate the URL where I put the folder where the files are hosted on my site, because this file is located in my computer, but whatever I do always modified and changed to http://misitio (where misisitio is the name of my site). How can I do to make this happen?

    Problema DreamWeaver.png

    Problema DreamWeaver2.png

    What server do you - use XAMPP, WAMP, MAMP?

    I use WAMP.  It is on my C: drive.

    C:\wamp\

    WAMP requires the files of my site in the folder of wamp www (same as my local site):

    In Dreamweaver CS6, the implementation looks like this:

    SERVER NAME: Test Server

    CONNECT USING: Local/network

    FOLDER on the SERVER: C:\wamp\www\MySite\

    WEB URL: http://localhost/MySite/

    Nancy O.

  • Upload to the server to Test (webdav, environment)

    I have been using VersionCue CS2 and GoLive CS2 for some time, and recently, I've upgraded to CS3.
    I started using Dreamweaver CS3 with VersionCue CS3. I have installed Dreamweaver to use WebDav interface to communicate with the VersionCue CS3.

    The problem I have is that when I try to upload local files to the server in test or production server, Dreamweaver tries to download the file and the directory "web content".
    For example, if I want to download, / index.html, it will try to download on "/web-content/index.html".

    Here is the log:

    / var/www/html/Web-Content / - error - failed to create the file remote/var/www/html/web-content. Access denied. The file exists may not, or there could be a permission problem. Make sure you have permission on the server and the server is properly configured.
    Web - content\index.html - cancelled by the user

    Activity of the incomplete file. 1 file (s) or folder (s) have not been filled.

    Files with errors: 1
    / var/www/html/Web-Content.


    How can I set the web content directory is the root of the document?

    Thanks in advance,

    KAZ O

    My intention was to have a VersionCue CS2-like environment: and the directory "web content". I wanted to have several other directories as 'documents '.
    It seems that to set up the document root, you must specify the "web content" under the document root, I created another project of webDAV for these directories 'documents '.
    Having two separate projects really sucks, but at least it can do what I want to do.

  • Implementation of development / test SQL Sever DB

    Hello

    I want to copy my production sql server database on another computer.

    In this way I would be in a separate environment of production total and I can run test restorations and maybe even set up a cloning every night.

    What I read online her seems simple enough to copy a database to another machine, backup the DB production and restore the .bak to the new computer.

    I have problems with putting in place the new database on the test computer.

    When I run SQL Server 2008 Management Studio it asks to connect to a server.

    Because I don't want to use my production server, I need to create a new one, but how?

    I can't find anywhere online where it tells you how to make a new server, an article said to put a "." in the name of the server, but that has not worked.

    Each article I find on this subject begins this process from the inside of the file structure of the DB server, which means their already connected to a server.

    Then they just say right click on databases - new... then make a right click on new database - restore... Yes YEA I get it.

    I can understand how to restore my .bak files, but how to a new 'server' to do in?

    Any help would be appreciated.

    Thank you

    Hi Tim,.

    The question you posted would be better suited in the Msdn Forums. I suggest you to ask your question in the Msdn Forums for assistance.

    http://social.msdn.Microsoft.com/forums/en-us/home?category=SQLServer&filter=AllTypes&sort=lastpostdesc

    I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

    Thank you

    Kulu Sharma.

  • AnyConnect IkeV2 backup server with test

    Hello world

    I configured anyconnect with ikev2 on our two different sites.

    Client PC have anyconnect pre configured on their PC.

    Under profile anyconnect each site I also put the IP address of the other ASA VPN site in the case where if users at site 1 connects to the ASA at site 1 so if this ASA is down they should automatically connect to Site 2 ASA.

    Want to know how I can test whether users are able to connect to the rear for the ASA.

    This test will be ok

    Turn off the ASA at site 1 and test the PC using name of Site 1 as Site 1 ASA connection is broken or turned off should it automatically connect to

    Back up the server who is ASA at site 2?

    Concerning

    MAhesh

    Yes, this test should do the trick, and give you an indication if the anyconnect client is toggled to the ASA secondary if the primary is unavailable.

    --

    Please do not forget to select a correct answer and rate useful posts

  • The CC Dreamweaver 2015 Server physical test C:\Inetpub\vhosts\ way can I change this.

    Thanks for reading.

    I put in place a test server and all the parameters pointing to the actual location of the site which is on my drive G:. IIS also has a site set up for localhost as a location on the G: drive.

    Sites > servers pointing to the location of the G: drive site.

    However when I run the Live view in DW CC 2015 I get an error 404 saying;

    URL requested http://mysite.com:80/main/profiles.asp

    Physical path C:\Inetpub\vhosts\mysite.com\httpdocs\main\profiles.asp

    Like I said the code is located in a folder on the G: drive and works very well under IIS Localhost

    My question is - why is - DW watching C:\Inetpub\vhosts\ and I am able to set it up so that it looks like the location of the G: drive where I have all my various sites. ?

    Thank you

    [SOLVED]

    After reading your note Nancy he made me think. Later, I changed the Web URL of http://icheck.com to http://localhost/icheck.zabadak.biz/asp/ and it works now.

    Another observation is good it is very slow to shoot to the top of the web page in live view. This is a great page of content but wow, so slow. Run an i7 with 8 GB here.

    Thanks for the help. Cheers.

  • Confirm the name of the zip and the links to download the app and Server Developer-suite

    Hello
    I want to learn plsql, oracle forms and reports.
    I installed Oracle database 10g (OracleXEUniv)

    First of all I want to ask is oracle application server requires to run oracle reports?
    and I need oracle developer suite and oracle application server.

    I'll download it from the links below. Please confirm the name of zip and links below that is fine or I need another zip.

    I have microsoft windows.

    Please click the link to download Oracle Developer Suite 10 g:
    link
    Postal code: (10.1.2.0.2) for Microsoft Windows:
    ds_windows_x86_101202_disk1.zip
    ds_windows_x86_101202_disk2.zip
    -What are the two necessary zip for Developer Suite?

    and please also tell what is use of Oracle Business Intelligence tools.
    It shows the zip: as_windows_x86_bi_tools_101202.zip

    Please click the link to download Oracle application server:
    link

    Postal code: Oracle SOA Suite 10 g (10.1.3.x) > Microsoft windows: x 86: Disk1 (soa_windows_x86_101310_disk1.zip) and 10.1.3.5.0 (ias_windows_x86_101350.zip)
    The two zip is required for the application server?

    Thank you.

    Hello

    There is a newer version of forms and reports.
    http://www.Oracle.com/technetwork/developer-tools/forms/downloads/index.html

    If you want 10g for some reason, you can go ahead with the link you provided, you need the 1 and 2. Once you have installed the following developer, its enough for you start with oracle forms and reports.

    Concerning
    SANAE

  • Problems of first-generation iPad app development test

    I just created my first iPad app, and I try to test the development with a first generation iPad app. But iTunes fails to install the application on the iPad during synchronization.

    The error message indicates that the application is not compatible with the iPad and the iPad needs a "new version of the software for the iPad." But the iPad first generation already has software available: OS 5.1.1

    What is going on? What is the solution?

    You cannot create a new application for iOS5/iPad1. Single edition apps are

    created automatically to version 28 for members of creative cloud.

    Pro or business users can always backsave one version.

    Older apps will continue to operate.

  • Difference between oracle and Oracle Application Server Developer's costume?

    Hi all

    If someone please tell me the main difference between the costume of developer and Oracle Application Server.

    I will be very thank ful.

    Thank you

    Hina.

    You would need an application to host the application, but each user could access this application using a browser. So the obligation for each user is simply a browser with an appropriate Sun JRE installed - this JRE (if not already installed) can be configured to be automatically downloaded and installed on the client from the application server.

  • Configure the remote server and test

    I installed Dreamweaver CS 6 and 10 CF and MS SQL server on the same computer.

    I use Dreamweaver CS 6 to create a test web site and to set up the remote and testing server.

    Dreamweaver invite me to enter the host name and the full directory.

    I would like to know what I need to enter information?

    hostname is localhost?

    complete diretory will C:\inetpub\wwwroot or C:\ColdFusion10\cfusion\wwwroot?

    Your information and your help is much appreciated,

    Kind regards

    iccsi,

    Iccsi,

    Yes. Host name to the title of "Test Server" is the hostname of the server test - in your case, since you're using CF, it must be the path in which CF works. It will be localhost:8888 or something similar - depending on what port you have configured for the webroot when installing CF. you could check in CF dashboard. Or, you could start CF server, open your browser, enter localhost. If the loading of the page Web of the CF by default, it's just localhost. If this isn't the case, add the port number.

    The remote server is your real Web server. It may be http://www.somesite.com or if you run it in a separate folder within your main site, it will be http://www.somesite.com/test - depends on you want to download the files of remote work.

    The complete directory under local configuration is the place where your files are located on your local system. Still, if you use CF, you can thus use CF webroot to create / store files - this way, you don't have to make copies of files in 2 places since that you configure the same folder as your test server too.

    -ST

  • OATS 12.2: Client / Server functional testing?


    Hi all

    We are installing OATS on a server.  Multiple users will have access to the OATMEAL via the remote desktop connection.  My concern is that many users will want to run scripts at the same time functional.  Where the question: is it possible to implement OATS in a client / server for this purpose architecture?

    Rgds,

    Ben

    Yes. Install OTM agents of the client and server computers. So that client computers can access server OTM using url and executes scripts of OTM.

    Keep the scripts in a shared path available to customers as a waiter

    Kind regards

    Dembélé M

  • It not install developer test dps app on iPad

    the ITI stuck on 'installation' with the icon to worsen. I have try the iPad test registry update and redo the certificates, but the same thing happens.

    its an iPad running iOS 2 7, should I upgrade to iOS 8?

    You need to add UDID the iPad to the list of devices, rebuild your dev mobileprovision file to include this device and rebuild the application with the updated mobileprovision file.

Maybe you are looking for

  • Replace SSD HARD drive

    I want to replace the HARD original (HITACHI) with a Crucial MX200 SSD drive in my mid 2010 White unibody MacBook but I'm confused because on the current HARD disk is write "Apple HDD Firmware" and I'm afraid of change because on my iMac (mid-2010),

  • Satellite L655-11J - always-hard drive activity

    Toshiba please I need help The first round of my laptop, I entered my position, my name, and a password, I have install Toshiba updates and Windows 7 updates (notifications, I had), then I noticed that the hard drive is active all the time, and the l

  • X 3475 access recovery partition

    Hello I have a X 3475 demo and you want to do a clean install of Windows 8. Unfortunately I can not access the thing ALT + F10 recovery partition intelligence. It starts just Windows 8 again. Is there a new way to files Windows 8?

  • Error 0x8007045D when copying files from computer to external hard drive

    I am trying to copy some files from my drive HARD outside., but I get this error (error 0x8007045D: the request could not be performed because of an i/o device error). I run windows check disk on my external hard drive, I tried to run windows defrag,

  • My Windows Installer does not work. Msg I get: the Windows Installer Service could not be accessed.

    Can't install or uninstall I get this msg.  The Windows Installer Service could not be accessed.  This can occur if Windows Installer is not installed properly. Contact your support team. HELP please.