RILD eats the battery after using my music

Strange coincidence, but both times I had the process rild run amok and obliterate my battery on my Droid4 have been after using the MyMusic player provided by Motorola. Restart the phone (lock + low-flying 10 dry) does not help, power-off-then-on does not help. The only thing that stops rild for me so far is to run the battery at 0% while cooking the entire phone to a bunch of warm pipes until it stops. Recharge and reboot - everything is fine - for a while.

Sorry to hear that it is happeneing you. We already have a current thread on this issue where Matt from Motorola is involved in this thread.

I'm closing this thread to keeos organized things.

You can often find answers and avoid the double post if you use the search at the top of each page.

here is the link to the current thread.

Thank you

Tags: Motorola Phones

Similar Questions

  • the share button don't work and need to leave the app after used

    the share button does not work and I need to force quit the app after used

    Any individual plugin or all of them?

  • Satellite M30x-154 works only with the battery in use

    I own a Satellite M30x 154 and did so for two years. Now the laptop is more fuel with just the battery in use.
    It feeds well with the power adapter and the power indicator shows the batterys is full of 74%.

    Any ideas?

    What to say? The battery is possibly defective. The fact is that M30 x is old enough laptop model. Everything is possible.

    What happens if you start Notepad with AC adapter, then remove the connector ca? Can you use Notepad on only battery power?

  • When my battery is fully charged, what button I press to turn off the battery and use the DC

    When my battery is fully charged, what button I press to turn off the battery and use the DC. I need to know what to do to avoid the impoverishment of my battery. OR is it save to leave the computer on, even when the battery is fully charged

    Well, actually from what I read, it's correct exactly as it goes, but not a complete list of the maintenance of the batteries all the factors, methods, practices and details regarding the definition of periodicals.

    While he was just more info not really part of what has been requested, this is why I don't give him properly a collection, I appreciate that you expand on it with greater precision.

    It is not often that one of my messages is considered as not long enough.  :-)

    Thanks for the help.

  • I just make the payment for the license, after using the month trial. and when I want to use the programs and said that I must pay. and received e-mail confirmation of payment, that is not what I do

    I just make the payment for the license, after using the month trial. and when I want to use the programs and said that I must pay. and received e-mail confirmation of payment, that is not what I do


    Please see the links below.

    Also, make sure you use the right adobe ID to log in.

    Hope this will help you.

    Kind regards

    Hervé Khare

  • Spit Lightroom 4.3 when using the brush after using the red eye tool

    I bought Lightroom a few days ago. I was traveling so I didn't have the time to 4.3.

    The version shipped with the disk (4.1) worked like a dream. I downloaded 4.3 yesterday and I couldn't be sadder. First of all, I noticed that it cause the 'root' to use more CPU, which means that it does not use the CPU for Lightroom itself. More demand is usually and significantly slower than the original one.

    Today, I used the red eyes for the first time, and I can't just brush top unless it crashes! It is simply impossible. I rebooted. Upgrade my Mac OS 10.7.5...  No use. I even uninstalled and reinstalled again. I was forced to do all my first edit in there usinf the brush, then use the tool red eyes as the last step. But any time that I commit the brush after using the red eye tool, it crashes instantly

    It seems something funny on your establishment for sure that there is not a wide spread thing.

    What exactly is your establishment and where are the various files located - catalogue, images, etc.

  • Satellite M30 does not show the connection of the battery after 5 min of use

    Hello

    My Satellite M30 recognize the battery when placed first in and for 5-10 minutes.
    After that the power meter shows I'm on sector without battery. Any advice?

    Anyone know if it is an issue that could be fixed with a new battery, or if it might have something to do with the connection between the battery and the laptop?

    Thank you very much
    g

    Hello

    If the AC adapter is plugged into the laptop that Toshiba Power saver should show a connected adapter. In this case the laptop must not run on battery!
    If you you unplug the adapter icon which appears in the taskbar should move from adapter to battery.

    One question; How old is your battery?
    Usually after several times the battery loses performance and it possible s you will be able to use the battery only for a few minutes. After this period, the battery is empty and needs to be recharged.

    Maybe your battery performance isn't the best right now and it should be replaced. ?:|
    This should be checked permanently.

    Good bye

  • My phone blackBerry smartphones is extremely slow and eat the battery

    I have faced this problem for 3 days and went to my service provider today to inquire.

    My phone has been extremely slow, the time clock thing is for still running, and so my phone dies in 3 to 4 hours with no real use. I was told that it was because I need to update my OS but when I got home and plugged in it says that my phone is up to date and there is no upgrade available OS. I bought a spare battery to see if it was the problem and it is not. This is getting very frustrating. He even got to the point of when I lock the phone I can't unlock it during the same get the screen to turn on. the only way to start is to pull the battery out and put back.

    What is the problem with my phone?

    Hello maddy 22

    It does not matter how old is your phone recharge your device software will help you of course but do not miss the KB14320 , I suggested after reloading of your device OS. Here's how to reload a device on a Mac software:

    KB19915 How to perform a reload of the own software application smartphone BlackBerry using BlackBerry Desktop Software for mac

     

    I hope this will help.

     

     

    Prince

    ________________________________________________________________________

    Click 'Like' If you want to thank someone.

    If problem resolves mark message (s) as a 'Solution', so that others can use.

     

  • Mac pro 2015 89.7% wear of the battery after 4 months and 82 cycles

    Is this normal? Should I worry?

    82 of cycles in 4 months is a bit high, but then maybe you need to use your laptop to be more portable than mine.

    Battery life is estimated at approximately 1000 cycles.  And if you regularly ride your system less than 25% (I suggest below 35% if you can avoid) maybe it's getting hurt.

    Regardless, you have a 1 year warranty! And you can buy AppleCare to extend this warranty to 3 years (hardware, and telephone support for 3 years).

    Your original question... take an Apple store and ask them to confirm the battery.  If defective, replace for free.

  • S430 battery after use

    I noticed that the battery is losing charge (or charges) once the computer was arrested and put away for the night. It is a new laptop then someone can tell me if the battery life is low, for example, the clock while shut down - or should not it happen?

    Thank you.

    PS - I put the battery to charge less than 30% and stop at 50%, which I was hoping would actually "store" the battery until my wife was needed and I would like to change the settings to load 95%.

    Hi all

    I have a Lenovo S430 edge for 2 years.

    This problem is a common problem on this PC, and there are two possible solutions.

    One is to uninstall the energy Manager. I did and it works, but then you can't control a large number of interesting parameters of your PC.

    The other, I found for 1 week and it consists to disable an option in Device Manager.

    Find the "Realtek PCIe GBE Family Controller' under 'network card'.

    Under the option for energy, you can find the second option enabled. You must disable.

    After that, I tried to leave my pc off overnight and now the battery lose charge no more.

    It is best to also check the list under network card and disable the option even for other devices, too.

    Best regards

    Beppe

  • Pavilion g6-2306el: life of the battery and using the laptop all day

    Hello

    I tend to use the laptop for work almost all day. If this is the case, she recommends simply detach the battery, instead of always keep at full load (since it has plugged all the time)? Thank you.

    Modern laptop PC battery is smart. You don't do any damage in the battery while the laptop is running on current alternative. To some people say otherwise and there may be a very slight advantage in terms of reduction of charge cycles that are saved on the battery by deleting, but for me, the hassle of constantly take the battery now outweighs the very small gains.

  • Cannot use the network after using McAfee antivirus with removal tool

    Original title: Mc McAfee antivirus more removal tool damage my network cards after that I use it, what do I do? McAfee tech say that they are not responsible.

    MC McAfee antivirus more removal tool damage my network cards after that I use it, what do I do? McAfee tech say that they are not responsible. After removing the software and restarted, computer cannot connect to the net (device manager shows problems with NIC miniport McAfee mc?).

    Hello

    Please join Microsoft Community where you can find the necessary information on Microsoft products!

    You can't connect to the network after McAfee antivirus using more the removal tool to remove McAfee software.

    The network drivers is maybe damaged.

    1. What is brand and model computer?

    2. What is error right messagee you receive in Device Manager?

    To confirm that the problem is with the driver, do us reinstall the driver:

    a. click Start, click Run and type devmgmt.msc and press enter

    b. now right click on the network card and uninstall it and restart the computer.

    You can also get the latest version of the driver from the manufacturer.

    I hope this helps. If the problem persists, let know us and we would be happy to help you.

  • Can not see the 2nd partition on the computer after using the shrink volume option

    I had 2 partitions on the hard disk the same... but after separate 60 GB unallocated space of 2nd partition (drive D) and after rebooting I don't see my 2nd partition. After that I tried to change the drive letter and path, but it displays the following message 'the operation did not complete because the disk management console view is not updated. Refresh the view by using the refresh task. "If the problem persists close the disk management console, then restart disk or restart the calculation Managerr. I don't want to lose the data.

    Hello

    ·         Have you installed a third-party program like Partition magic on the computer?

    Try these methods further and check if it helps:

    Method 1:

    Try to use diskpart to assign a drive letter to the disk #0 Partition #1.

    (a) click Start Orb > type diskpart

    (b) click right diskpart in the above results > click run as administrator right

    (c) once diskpart load type list volume, press enter

    You should notice that you can see your partition you use for your data, it should not not have a drive letter assigned to it.

    (d) type select volume 6 (replace 6 with the number of the volume assigned to the partition in question)

    (e) type assign letter Z (replace Z with the letter you want to assign)

    When you look in the computer, you should be able to see your score.

    Method 2:

     

    I also suggest that you run the Microsoft fixit tool and check if that helps:

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/en-us

    Method 3:

    You can follow the steps in troubleshooting section below and check if it helps:

    http://support.Microsoft.com/kb/2001877

  • BlackBerry Z10 problems with the battery while using the LTE

    Given that I am connected to LTE (4 G) battery is not longer than 8 hours. Is this normal?

    Use of the battery can vary from one user to another, based on dozens of factors, including running applications, intensity of the mobile signal, the overall health of battery, use of data, etc. There is no use of a normal battery without comparing many factors.

    But 8 hours use of the battery can be normal that Q10 with moderate to heavy use in an area with a great LTE signal at least.

  • How to set current row in the table after use the button tab on inputText

    Hi all
    My first post.., I am beginner in ADF and I'll try to explain my problem.

    For now we use ADF 11 g (11.1.1.4), in a jsff page I have a table with a column of inputText.
    On the the inputText valueChangeListener, I invoke a method in a bean viewScope that call an EJB method, make some services to the EJB on the modified line. After that, I update the VO and the table (because other values in the row have been changed) and reset the focus on the inputText even modified by the user with javaScript, because the focus was lost after updating.
    So far, everything works fine.

    When I use the arrow keys to change the selected line in the table, this is excellent work (focus is always in the inputText next or previous), but if the user tries the key tab allows you to change the current line, the inputText on the line that has the focus, but the current row in the table is not changed (I think that is normal).

    My question: How can I change the current line after the tab key in this case?

    I don't know if it is really clear, not easy to explain, do not hesitate to ask for more details.
    Thanks in advance.

    Hello

    My question: How can I change the current line after the tab key in this case?

    Use a client event to listen to the keyboard entry and intercept the tab. Use af:serverListener to call the server to set the rowKey on the table and deliver a PPR for the table to repaint

    See example 11 on http://www.oracle.com/technetwork/developer-tools/adf/learnmore/index-101235.html#CodeCornerSamples

    to learn more on how to use the client listener and the receiving server

    Frank

Maybe you are looking for

  • Pavilion m8357 need drivers

    Hi I have a HP m8357 with windows vista. I uninstalled vista and installed xp but none of my drivers will be installed. Is there a link for the drivers to lift this pc and rerun

  • Cannot set WLAN on my Satellite L350D-131

    Hello world Recently purchased the 350 d, try to set ISPis "talktalk" up to wireless working, and after having spent all day today on the phone to them, they feel that my laptop is broken. My router is a "talktalk" Echolife hg520 and my laptop 2 days

  • XNET - activation of the RPC Server - error

    Hello I am trying to load XNet database on my RT goal and now I get the error using the Xnet API. Running multiple remote database manager XNet vi doesn't help not either as it is still stuck with the error and no waiting period. I can connect to my

  • Do not charge the battery Acer 5733Z

    Hello world I have a less than 6 month old Acer Aspire 5733Z.  Worked like a dream until yesterday afternoon.  I still have the laptop plugged in, but then he stopped charging.  The orange indicator light don't show on the front of the machine to 100

  • Why my laptop turn

    I'll be on my lap top and it stop just without warning