Ring of blackBerry Smartphones Urgent-bold 9000 and audio does not work after upgrade to 5.8.8.822

Similar Questions

• Trackpad and keyboard does not work after upgrade to Windows 10

  Trackpad and keyboard do not work after the upgrade to Windows 10 in Boot Camp on a MacBook Pro in early 2011. So, I'm unable to enter password. How to connect? Can I go back to Windows 8?

  1. you can turn off your Mac and your power it back up and hold the Alt/Option key.

  2. you can also run the following procedures to restore the OS default.

  3. If you use a Mac 2010 to run W10, officially Apple does not support the combination. Older than 2012 Mac is not supported for the W10.

  4. Please see also Boot Camp: the operating system default value .

• HP Notebook: Wifi and Audio does not work after update of the 10 victory

  I updated the OS to win 8.1 to 10 and it was somthly, but after this recent update to win 10 all at once the wifi has ceased to recognize all the networks around it... also the audio has stopped working. I tried the two troubleshooting and found the audio starts to work after you troubleshoot but wifi does not work. This happens everytime I turn on my laptop, and whenever I have to solve an audio driver to fix it but the wifi doesn't work every time... Please help... I also tried to update the drivers of these two, but he said that the drivers are updated every time... Please let me know if anyone can guide me through this problem...

  Hey @Riken_HP,

  Welcome to the Forums of HP Support! This is a great place to find solutions and help our community!

  I understand that you are having problems with the wifi on your HP laptop. I'd be happy to help you.

  What is the exact model of your laptop? If you do not know who will find it here: http://support.hp.com/us-en/drivers

  The following pages are useful for troubleshooting wireless connectivity problems.
  Troubleshooting wireless network and Internet (Windows 10)

  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Forget a network (Windows 10)
  Forget wireless network profiles in Windows 10

  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the Winsock Catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  Test an ethernet connection:
  Not call explanation. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

  Please hold me.

  By pressing the Thumbs Up button below, you can always say thank you!

  See you soon.

• BlackBerry Smartphones BB Bold locked + 10 times does not work

  I accidentally reset my password and have tried to submit 10 such times than recommended.  I did this and then removed battery.  Still in lockout.  Help please.

  SVL

  You ask about the normal device password lock?

  Just type random password characters ten times... after the fifth or ninth attempt, you will be prompted to type the word "blackberry" so that you can see the password as you type and before the tenth incorrect test, you will be notified that the device will wipe itself all the data.

  Have you seen this?

• BlackBerry Smartphones BB Torch 9800 touch screen does not work...

  My BB Torch worked very well... so I took the charger and the touch screen wouldn't work at all.  I deleted the old emails and text messages, and even ensured that all the photos saved on the memroy card to free up RAM memory.  But my touch screen just stopped working and still does not work.  Any ideas?  The phone is more than 1 year old and has served me well.  I have the latest downloaded OS, but don't know if there is somewhere a software error or if the phone is all give up!

  Yes, it was the first thing I tried like 10 times. Turn the data cable that connects the upper part of the cursor to the bottom of the phone was the culprit. This also is attached to the 'mouse' trackpad and causes the work does not correctly. I was told that it is a problem that is typical with most slider phones and not difficult to solve. Fortunately for me to be here in the Middle East there is a lot of available mobile phone shops, and I fixed it in about 6 hours to include a new hard plastic protective case, a new trackpad mouse and a screen for about 80 $ US protector.

• BlackBerry Smartphones middle of the space bar does not work?

  Hi all

  I used a company Blackberry issued before, but I just bought myself a new model of the curve a few days ago.

  I had a hard time typing today, and I realized that this is because the part of the space bar does not work. Specifically, if I push on the left or right edge of the space bar, I get a space. But if I press in the center of the space bar, the button clicks but 2/3 of the time that no space appears. So I have to press the button 2 or 3 times to get a space. Or I have to press the edges of the space bar.

  Is this a problem with my specific blackberry or this entire line has this problem?

  I should ask T-Mobile for a repair or replacement? I just got a few days... someone had success treats this issue before?

  Thank you all!

  Hi and welcome to the Forums!

  I've not seen all messages more precisely the space bar. It may be as simple as a dust or dirt stuck under the key.

  If it was me, I take it immediately and get a new one. It may be defective. Why pay good money for something that may have a permanent problem?

  I hope this helps!

  If this answers your question, please close the message by using the options on the key of the kudo.

  Thank you very much!

• Q10 blackBerry camera does not work after upgrade Q10 to 10.3.1.1581

  I've upgraded to the new operating system on the weekend and I love the new screens and functions - except that now all my camera does not work, can't take pictures (movies are OK).  I tried all settings, no combination it will do the job.  Restart the phone does not work.  Any suggestions?

  I would like to peform a security wipe on the device.

  To perform a security Wipe please follow the instructions below. Don't forget and allows to do a full backup before erasing all data will be erased when the BB link wipe:

  http://www.BlackBerry.com/BTSC/KB33591

  Once the wipe is complete, you can restore your backup. Remember that the data in the backup can be the source of the original problem and restore can restore the problem, as well. To compensate for this, I do not recommend restoring the passage of the backup settings.

• Mouse and keyboard does not work after sleeping on a laptop

  After awakening from a sleep of my laptop, my keyboard and mouse went crazy, pushing buttons at random on the screen, beep and completely freeze then both. I restarted my computer and got to the login screen which I was able to type in, then he connected and the keyboard and mouse do not work. I plugged in a USB mouse and the mouse that works very well. After some playing around, I got the keyboard works by accessing the control panel and change the speed at which the keys type and for some reason, this fixes the keyboard. However, I am still unable to get the mouse works.

  So three questions, 1 - what happened in the first place? 2 - why my keyboard was working to connect, but not once it really connected? 3. How can I get my mouse back?
  Thank you!

  Hi NicoleWood,

  You can read the folloaing articles and see if it helps.

  The problems of wake the computer from sleep mode

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista

  Hope this information is useful.

• Fingerprinting and display does not work after the recovery of the system (Pavilion dv7 4080us)

  Hello.

  This weekend I decided to do a restore of the system on my Pavilion dv7 4080us (LW170UAR), as I have done several times previously, using the built-in HP and the recovery etc. partition manager.

  Operating system is Windows 7 Home Premium 64-bit, and everything worked OK with the new facility, with the exception of two things:

  • I don't see my AMD display driver listed on device listing Manager. Only 'Intel HD Graphics Family' is listed under graphics cards. I tried to download the drivers from the support page, but it doesn't help.
  • The fingerprint reader does not work. I tried to uninstall the drivers and software several times, rebooting and everything else I've seen that suggestions on these forums, with the files found on the support page of my laptop. No luck yet.

  I would appreciate any kind of help. Thank you!

  Excellent!  I am happy that you now have the correct drivers installed.

• BlackBerry smartphone app error 603 and BBDS does not recognize my device

  Here's the situation: the battery ran out on my unit earlier this week. When I started to charge, the unit will start automatically restart. Before restarting, the messages "error app 603' and 'reset' appeared. If I click "reset", the whole process starts again.

  The previous messages in the forum I read about 'error app 603' suggested I should restore the device settings or reinstall the operating system. I tried to connect my device to my laptop via USB cable, however the computer will only recognize the connected device with a chime at the beginning of the discount to zero, followed quickly by a chime of disconnection being rebooted. The computer or software Deskstop BlackBerry recognizes the device while it is stuck on the '603 error message' app.

  What else can I try?

  Hello and welcome to the community!

  Here's a knockout who deals with this error:

  • http://support.BlackBerry.com/kb/articleDetail?articleNumber=000023951&language=English

  For the charging of the OS, you can better use this method... on a PC (you can't do this on MAC):

  (1) make sure you have a current backup and your BB complete... you can find complete instructions via the link in my sig auto below. Sorry, already a moot point counts with the error.

  2) uninstall all the BB OS packages from your PC,

  (3) make sure you have the BB Desktop Software already installed

  • http://us.BlackBerry.com/software/desktop.html

  (4) download and install on your computer, the BB OS package you want:

  • http://us.BlackBerry.com/support/downloads/download_sites.jsp
  • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

  5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

  (6) work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...
  • Note Although written to "recharge" and the storm, it can be used to upgrade, downgrade or recharge any BB device model - depends on the operating system package you download and install on your PC.

  If, during the process of step 6, your BB presents "507" error, simply unplug the power cord of the BB USB and reinsert it. do nothing else... This should allow the installation to continue.

  You can also study the use of BBSAK (bbsak.org) to perform the wipe what he is capable.

  You may also use these tips:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

  • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

  Good luck and let us know!

• BlackBerry Smartphones SMS and MMS does not work after 10.26.09 software update.

  I have the Verizon BlackBerry Storm 9530. When I try to extract the SMS and MMS messages, I get the following message: Eception exception: java.lang.NullPointerException. After hours on the phone with Verizon, they blame the people of BlackBerry. So now I have no possibility to send SMS; the send or receive. Other than, I'm very happy with the update. Can someone help me? Thanks, Bouldaire

  Of course, this does not either. I then did a restore of my office and 'bingo' everything works fine. I'm still distraught about the java error message; but luckily he is gone and everything works fine. Thanks for your persistence and time with me. Best regards, Patrick

• BlackBerry Smartphones Seems this receiver and mike do not work

  Hello

  I got a new BB Torch 9810 two days back. It was working fine so far. All of a sudden today morning, I realized that when someone calls me and I take the call, I don't hear anything. If I say something that does not reach the other person. It seems that the receiver or the microphone on the phone has stopped working since today morning. It was working fine until yesterday.

  When I call comeon, the call goes through but I am not able to hear the sound intensity or the person... After doing some tests, it seems that when I press the button "Mute on / off" a few times, the other person is able to hear my voice during a very short interval...

  I checked the speakers are working correctly, eamil is fine, notification sounds are very good...

  It seems to me a H/W issue, but given the quality of BB (main reason from the Nokia E72), I tend to not believe.

  Anyone seen this before? If so, any suggestions are very much appreciated...

  Thank you in advance!

  Kind regards

  Vikram

  Ok.. After a few game, I re-sitting the SIM card and now the phone seems to work very well. Although that do not know if this is the real problem... However after re-making the SIM card, the desktop folder (where I used to get my corporate mails) went... Is it possible that I can get that back?

• BlackBerry Smartphones Hotmail does not work after upgrade to Blackberry software

  A week ago my Windows Live Hotmail has been hacked. Reset password and everything seems to be OK here. On Lun. the software upgrade of the OS 6.2xxx to 6.3xxx. Unable to get my Bold 9650 email now. The old password or the other Word works, although the old works with my Facebook account. Cannot add another hotmail account or uninstall the existing account, so I could do it again. Yes, e-mail works everywhere else. Someone knows the way through this? Thanks.soulnanlv

  Since the device, go to mobile.blackberry.com
  Scroll to connect and click Send.
  Click on join now for the e-mail service you want to add and see if it works.

• BlackBerry Smartphones HTML Email 'Automatically download Images' does not work

  I use the BIS service with 4 separate emails, (paid 1, 2 free on the web and 1 BB email) using a Blackberry Storm 9530 with Verizon Wireless service...

  I have this setting enabled for all of my emails, to automatically download images and display in HTML... but no email no. Everyone I get I have to manually, select options and upload pictures! How can I fix this?

  Hello!

  See this KB:

  • KB15254 How to configure HTML email support on the BlackBerry smartphone email

  It sounds like you already have the correct settings. But, at the bottom of this KB is a statement about the external link images... If the image is linked to the outside rather that integrated, you will still need to manually get the image.

  See you soon!

• Smartphones blackBerry lock key / sleep button does not work after upgrade the OS to version 5.0 Bundle 1168

  a refresh, I noted that the "key lock" button and the button 'sleep' on the top of the phone no longer works. The phone unfortunately does not go on standby when you press the mute. The mute however put mute a telephone conversation.

  Mari_43 wrote:

  is there anyway that I can get back to a version that supports?

  Yes, you can downgrade to an older version if you want.

  1 remove the newer operating system of your PC by going to control panel > Add/Remove programs. (If you never physically installed the OS on your PC, go to step 2.)

  2. next, download and install the earlier version of the operating system. Operating system blackBerry downloads

  3. install the older operating system to the computer by running (double click) the downloaded file.
  4. go into c:\program files Research in motion\apploader and delete the file named "vendor.xml."
  5. plug in the BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file.