Similar Questions

• 7mm too small SSD for my x61s

  Hello

  I just bought a new SSD to replace the HARD drive, I had. The SSDS works well, but he is currently being held in place by the paper, because it was too thin to hold ramps rubber that has kept the drive HARD original in place.

  Someone knows any reliable product to solve this problem?

  Or do I just wrap the SSD in Ribbon to make it thicker 2 mm?

  Anything I should watch?

  polar_foxx,

  have you removed the caddy of the original drive 9.5 mm and fixed on the 7mm disc, worked a treat on a ThinkPad that still use original rubber of the R series track for me.

• Riser PCI for C200 M2 Server

  Hello Experts,

  We need a server with 3 x full height and 2 slots PCI low-profile x. is possible to have this card riser PCI for UCS C - 200 M2?

  If Yes, what is the part number for this card, because I couldn't find in the cisco documentation.

  Thanks in advance,

  Mohammad

  It is not possible to replace the mount adapter card in a C200 M2 with one who can place 5 adapters.

  The C200 M2 is a 1U rack server. It comes with a riser card that can hold a full height and low profile card. There is not enough physical space on the 1U server to contain 5 cards.

  The C210 and C250 rack servers are 2U high and are delivered with a riser card which can accomidate 2 low profile and 3 adapters to full height, although in almost all the C210 and C250 configrations a low profile raid controller will occupy a connector low profile.

• PowerEdge 1950 II PCI Riser

  Hello

  I have a Dell PowerEdge 1950 genII.

  But he holds a riser PCI64,

  And I saw on various forums that it could be replaced by a riser PCI - Ex.

  With the REF: FP332

  I bought the riser to see that it in fact does not at all...

  The connector must be reversed in fact to make it work/adjustment.

  -That someone had a sollution or compatible PN

  Riser (new)

  Reference Dell PN: CN-0FP332-69702-85 a-0410

  Rev: A00

  Server:

  Dell PowerEdge 1950 II

  ST:

  Old riser (full)

  Reference Dell PN: CN-0J9065-69702-76Т-1164

  Rev: A01

  Old riser (length hakf)

  Reference Dell PN: CN-0J7554-69702-775-1347

  Rev: A01

  If you need more info,

  Let me know

  Hello

  MOHdennisNL

  With the REF: FP332

  I bought the riser to see that it in fact does not at all...

  The connector must be reversed in fact to make it work/adjustment.

  -That someone had a sollution or compatible PN

  Riser (new)

  Reference Dell PN: CN-0FP332-69702-85 a-0410

  It is the side map for location of built-in storage. If you forced into the slot for the Center or the mounting left then you may have damaged the slot.

  MOHdennisNL

  Old riser (full)

  Reference Dell PN: CN-0J9065-69702-76Т-1164

  Rev: A01

  Old riser (length hakf)

  Reference Dell PN: CN-0J7554-69702-775-1347

  J9065 and J7554 are the center of PCI-X and the left risers. The Center and the left lift PCI - e are the numbers J7846 and JH879. You might find them listed under the different reference numbers as well. We have generally several numbers for the same part.

  Thank you

• How to compare the value of a link with a 'HOLD' string variable...?

  Hi all
  
  I have two tables - TABLE1 and TABLE2, and the tables are having the STATUS column. The requirement is as if the STATE of TABLE1 column is updated as 'HOLD', then the same value must be updated the column STATUS of TABLE2.
  
  
  create or replace trigger "TEST_TRG".
  FRONT
  update of 'STATUS' on 'Table1 '.
  for each line
  Start
  if(:New.) STATUS = 'HOLD') then
  {
  insert into TABLE2 (STATUS)
  value (: new.) STATUS);
  
  }
  end if;
  end;
  
  
  COMPILE ERROR:
  Compilation failure, line 3 (02: 40:14) line numbers associated with compilation errors are relative to the first BEGIN statement. This affects only the compilation of database triggers.
  PLS-00103: encountered the symbol "{" when waiting for one of the following numbers: (begin case declare exit for goto rise back loop mod null pragma select update while < ID > < a between double quote delimited identifiers of > < a variable binding > < < continue the current closing delete fetch locking insert opening rollback to savepoint sql set run commit forall fusion pipe purge "{" symbol has been ignored.) Compilation failure, line 7 (02: 40:14) line numbers associated with compilation errors are relative to the first BEGIN statement. This affects only the compilation of database triggers.
  PLS-00103: encountered the symbol "}" when expecting one of the following values: (begin case declare end elsif else goto exit rise back loop mod null pragma select update while < ID > < a between double quote delimited identifiers of > < a variable binding > < < continue the current closing delete fetch locking insert opening rollback to savepoint sql set run commit forall fusion pipe purge the symbol "} ' was ignored.)
  
  
  
  
  I get the errors as above when the trigger is compiled. Can someone please help me fix it.
  
  
  Thank you and best regards,
  Suhas
  
  
  
  
  
  
  
  
  

  CREATE OR REPLACE TRIGGER "TEST_TRG"
     BEFORE UPDATE OF "STATUS"
     ON "TABLE1"
     FOR EACH ROW
  BEGIN
     IF (:NEW.status = 'HOLD')
     THEN
        INSERT INTO table2
                    (status
                    )
             VALUES (:NEW.status
                    );
     END IF;
  END;
  

  You should learn how to write PL/SQL code.

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Apress.com/9781430235125
  http://Apex.Oracle.com/pls/Apex/f?p=31517:1
  http://www.Amazon.de/Oracle-Apex-XE-Praxis/DP/3826655494
  -------------------------------------------------------------------

• iPhone 7 restore from iCloud still holding

  Hello, I have a new iPhone 7. Recently, I had saved my old iPhone 6 and wanted to restore the new iPhone 7 of my backup. I started the process of restoring the day I got my phone and it of been two weeks and is apparently still restore. I often have my phone on and loading and very good WiFi connection, but the restoration has not yet completed. I have some new updates to iOs which must be installed but that cannot be done until the restoration is complete. What should I do? When I look at my phone, it seems that I'm not missing any information. Any suggestions?

  He says that it restores from a backup on your lock screen, is thus that which is telling you that he has not finished?

  You have the ability to stop the restore process when you go to settings > iCloud > Backup? If so, then stop it. It could be an application that has not been fully downloaded, or other media that has not yet downloaded. I got my iPhone do that once in a while and like you, could see nothing which has not been restored. Maybe it's stuck saying it restore even if it's really over. A restore of backup should not take more than a few hours at most.

  If you do not see a way to stop the restore, then reset your unit: hold the home and power buttons at the same time and continue to hold until the Apple appears (up to 30 seconds). Once the reset is complete, the lock screen is displayed.

  See you soon,.

  GB

• I can't delete app icons for my new IPhone 7, when I press and hold on the icon it shows if I want to share the app?

  IM cannot delete apps from the iPhone 7 when I press the icon, he asks me if I want to share?

  any ideas?

  You do not press and hold.  You press VERY briefly until the icons wiggle and X in the upper right corner.  You can remove the application.  Not all applications (for example, settings, photo, Messages, pictures, clock) can be deleted.

  Best,

  GDG

• Why am I unable to send animation effects when I press and hold send key

  I have the ios10 update on my phone but when I hold down the Send button to add animations, little option to choose what I want will not appear in my messages nor can I receive the animation when someone sends me

  Disable the reduced movement.

  Settings > general > accessibility > reduce motion > [disable]

• macOS Sierra - press and hold the power button to enter the mode 'sleep'

  I recently updated my MacBook Air (13 inch, early 2015) model of El Capitan macOS Sierra 10.12. Before the update, hold down the power button / stop for 2-3 seconds, put the machine in standby mode. It does not properly after the update. Release the power button to switch to sleep mode works only once after each time you start the machine.

  I know he has an option to set the mode of sleep using Ctrl + button / stop and by selecting one of three options to restart, sleep and Shutdown, but who needs 3 more click click and is not fast. Also, independently of any application that is open, pressing the button walk / stop worked fine before the update, but now I need to be on the desktop even do Ctrl + Power button work.

  All patches available for it? Miss me the old way of put my Mac to sleep I do not remember if I did some tweak in my Mac, or was it a default feature...

  Greetings jainam2209,

  Thank you for using communities of Apple Support. It seems you want to put the Mac to sleep, but it does not always work.
  I would recommend read you these articles, the first article explains the ways that macOS Sierra is supposed to go to sleep.
  The second article can help if the computer won't sleep when you're trying to sleep.
  

  macOS Sierra: put your Mac to sleep

  macOS Sierra: If your Mac won't go or stay asleep

  Take care.

• 4th gen Apple TVRemoteWon can't hold a charge

  Recently my ATV 4 distance began to unload completely in just a few days, rather than the promised several weeks and as he recently are someone else has this problem?

  I called Apple support and they sent me a new replacement. It works very well in all its forms, but also will not hold a charge more for about a week or two. I found it completely discharged tonight, such that it wouldn't work at all, even if I've completely charged about two weeks ago.

  It is now clear that this should not be the fault of the remote, but maybe some correlation between this one and the Apple TV itself. He would have to do with a Bluetooth problem? In the menu of the ATV, I saw that it had detected the Bluetooth entry to my TV, but that it was not connected. It is trying to connect and wasting energy? I do not have direct control over the TV Bluetooth, but it controls via the Apple TV 4 using the HDMI-CEC capabilities that work well.

  I had 4 ATV for nearly a year. It has always worked well, and this remote discharge problem only started a few weeks ago. I brought no changes to system before this problem appeared.

  Any ideas on why the two remotes in a row see this problem in my system?

  Have to introduce any other electrical devices in the room. Is there anyone in your household who might be using the remote control for the games.

• Impossible to delete iOS apps 10-pressing/holding icon just widgets for the app.

  Impossible to delete iOS apps 10-pressing/holding icon just widgets for the app.

  Hi b. Bruce Brinson,.

  I understand that you are having some difficulty to remove apps on your iPhone, and instead you see additional options for these applications. I know it's important to have control over what is on your iPhone, so I'm happy to help you.

  From what you described, it seems that you use tactile 3D, instead of simply touch and hold for remove. You can see more info on tactile 3D and how it works here:

  3D Touch - iPhone
  

  Tactile 3D

  Tactile 3D gives you an additional way to interact with the iPhone. On supported devices, you can tap the screen to see the previews, access useful shortcuts and more.

  Tactile 3D is based on:

  • iPhone 7

  • iPhone 7 more

  • iPhone 6 s

  • iPhone 6 sec more

  

  For example, press a notification to the lock screen to respond. In Mail, tap a message in the list of the mailbox for a glance at the contents of the message, and then slide up to see a list of actions. Or press a little more pop the open message. In Photos, tap a picture for the look to it, and then drag upward to share or copy it; Press a little bit more far to jump the image in full screen. In this document, look for other examples of tactile 3D, which are marked with .

  You can use Touch 3D on the home screen, tap the application to see the menus of fast action. For example, you can press the icon of the camera on the home screen, then choose Selfie take. Quick action also works in the Control Center. For example, press the flashlight, then choose a light bright, medium, or low.

  Once you have an understanding of what is currently happening, try the following steps to remove apps from your iPhone:

  Delete music, movies, applications, and other content to your iPhone, iPad or iPod touch - Apple Support
  

  Remove an application

  1. Press and hold the application until it stirs.
  2. Press on the in the upper left to remove.

  You may be prompted to confirm that you want to delete the app. If you see a pop-up that says, "[application name] remove will also remove all the data," press DELETE.

  Thank you for using communities Support from Apple. See you soon!

• Press and hold the menu does not appear while composing email - iOS 10

  As per above, if you press and hold before type anything, the submenu would not appear.

  You must type something in front first, then press and hold to see the submenu.

  As on the new line without typing anything, submenu just appear in press and maintenance.

  This has never happened before on iOS 9, as I always have right now to insert any picture without typing anything.

  This is a bug in ios10. Thought I was going nuts trying to re - copy text in a different application and bring it back on my mail.

• Memory riser

  I have a Mac Pro 3.1 and one of the elevators of memory is dead. It's Elevator B and I was wondering if a riser scored will work in the B slot.

  Thanks for your help

  GC

  Yes, they are identical.

• How long they will hold my phone will provide for collection

  Pre-order iPhone 7 began today. I was looking to pre-order it and have it delivered to me but its already a 2-3 week wait on that. I was looking for pick up in a store, but I won't be able to pick up the 16. If I pre-order for the 16th, how the store long this for me? I guess if I can pay the right of prepayment on delivery when I pre-order they should hold until I can pick up. Anyone has any ideas on this subject?

  If you don't pick it up at the time of your appointment, Apple is free to sell to someone else.

  You do not pay in time of pre-order, you pay at the time of collection.

• Another that holding down the power button, then by restarting, how should I manage my end 2009 27 "iMac when he crashes on the first blank white screen and won't start?

  Another holding down the power button, then by restarting, how should I handle turn on my end 2009 27 "iMac when he crashes on the first blank white screen and won't start?

  Combinations of keys start for Mac - Apple Support