RN102 stuck after starting

Similar Questions

• iPhone 6s is stuck after iOS update to 9.2.1.

  My 6 s iPhone is stuck after iOS update to 9.2.1. Laminates to 9.2 & the problem still exists. If someone has had this problem before and how it was resolved. Need help!

  Hi ahamedrzk,

  Thank you for your participation in the communities of Support from Apple.

  If your iPhone 6 is stuck during startup, try the following steps from your iPhone, iPad or iPod touch does not respond or won't turn on:

  If your device turns on but hangs when starting

  You can see a blue or Red Apple logo screen for a long time during early upward. Try the following steps:

  1. Connect your device to a computer and open iTunes. If you don't have a computer, you can borrow one, or go to an Apple Store or service provider authorized Apple for help.
  2. When your device is connected, force it to restart. Press and hold buttons sleep/wake and Home at the same time. Don't release when you see the Apple logo. Keep now until you see the Recovery mode screen.

     

  3. When you have the ability to restore or update, choose update. iTunes will try to reinstall iOS without erasing your data.

     

  iTunes will download the software for your device. If it takes more than 15 minutes, your device will exit Recovery mode and you need to repeat steps 2 and 3.

  All the best.

• MacBook pro gets stuck after 6 minutes

  I got my MacBook Pro for about 4 years. Everything was fine until a few months ago. There is some ongoing work on utilities in front of my house and the workers accidentally done something to mess up my internet connection - cut a wire or something? In any case, I told them and fixed it. Then, my MacBook Pro started having problems.

  It gets hung up or stuck after about 6 minutes of work. It does not seem serious if I work online or offline.

  The strange thing is it only happens at my house and it only happens with my MacBook Pro. My iPad and iPhone, both work very well for me. My MacBook Pro works great everywhere else. Other MacBook works very well for me. It of like my MacBook Pro is trying to do something specific, or to run a program only when it is at home and is then stuck.

  I took it to the Apple store and a third computer repair place to party, but it still works very well in these places and they do not find what is wrong.

  I don't know what to try next.

  Help, please!

  Note the time of the next frost. After the reboot, open the Console app in Finder > Applications > utilities and look for entries of the log at the time of freezing. Suspicious message here.

• Pavilion mini 300-010 in: no display after starting in safe mode

  Recently (2 weeks) bought the Pavilion Mini Office 300-010 and was well before decide me Flex my curiosity.

  the office is connected to my monitor VGA Samsung using the HDMI-VGA connector since the release of funds has no VGA or DVI - I usage options.

  the part where my curiosity killed the cat, was when I decided to start the winodws 8.1 in safe mode and see what happens.

  pressing F8 did not help that the load of the OS had no delay (or maybe it's the UEFI BIOS) and so I decided to put safe mode with "a minimum without network option 'using 'msconfig'." Performed a reboot assuming I see safemode and all I got is a black screen. Noticing that the driver for the conversion of the display cannot be loaded in safe mode and now I'm stuck because I do not have a p LCD monitor that plugs directly into.

  I checked the monitor VGA just in case, and it seems to work very well with my laptop. . Done reboot "N"-number of times and the result is the same. ".

  is there a way to get out of safe mode without actually doing a HDMI compatible monitor by just using the keyboard?

  Hello @LogicMantra,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your office is not able to display after starting in safe mode, and I'd be happy to help you in this case!

  To fix this, I recommend you to borrow an HDMI compatible monitor and update the drivers for your system this way. If this does not work, please follow this document on the computer starts up but screen remains blank (Windows 8).

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• Stuck on "starting windows" screen during installation of Windows 7

  Hello

  I used windows 10 in dell inspiron13 7000 series. Now, I want to use windows 7 as for my personal use. When I try to boot my laptop with USB stick bootable, because I don't have cd player in my laptop. The problem is when I run the startup it stuck at 'starting windows' screen I can't go any further, so I need force shutdown my laptop. I am unable to install windows 7 on my laptop. What can I do, please help me.

  Thank you.

  Hi Praveen,

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  1. is Windows 10 still installed on your computer or you have wiped the hard drive?
  2. don't you upgrading from Windows 7 to Windows 10?

  Thank you for details on the issue.

  If Windows 10 is installed, you can downgrade to Windows 7 within 30 days of the upgrade. If it crosses the 30 day limit, the option in the settings that allows you to return to your previous version of Windows will not be available.

  Please see this link:
  Return to Windows 7 or Windows 8.1
  http://Windows.Microsoft.com/en-us/Windows-10/going-back-to-Windows-7-or-Windows-81

  However, if you want to install Windows 7 from an external installation media, you can re-create the rack installation of Windows 7 from this link:
  https://www.Microsoft.com/en-us/software-download/Windows7

  It is possible that the installation media does not develop properly. Please also make sure that you disconnect all the devices connected to the computer before installing Windows 7.

  Note: You may lose programs installed after upgrading Windows 10. I strongly recommend to back up your personal files and data on an external hard drive.

  I hope this information helps.

  Simply answer the required information and let us know if you need more help.

  Thank you

• After starting windows 7 Notepad opens titled GfxCUIServiceInstall

  After starting windows 7 Notepad opens a window titled GfxCUIServiceInstall. I had started this process by calling Microsoft. I realized soon that's a mistake. The Tech, I mentioned, began his response to my question to demean my question and my experience? He said, emphatically, that the problem was with the windows operating system itself, and it's my fault for buying a PC, in December of 2012, which had no 8 installed and always ran 7. That ended with her alone and unique solution - I needed to pay for remote access to my PC, to solve this problem, because I didn't have the know-how. So despite deep understanding of this Tech, I ran a search and retrieval system Mech program instead. I found a file called bootsqm.dat. But even once, I'm stuck, because I do not know what folder say file belongs to. This time, instead of having an experience to repeat, I chose to come here to ask the community instead. That experience has really left me a bitter taste to the Microsoft Customer Service. I hope that someone here can and would really help with this one. Thank you in advance.

  I found myself in the same situation just two days ago. I thought about her because I traced my actions for these last two days. It turns out that I put all *.vbs files to open Notepad (I did because I was plagued by virus heuristics *.vbs).  GfxCUIServiceInstall is a vbs script and it opens at startup. So if I put the vbs files to open in Notepad, gfxCUIServiceInstall opens at startup in a Notepad file everytime I open my computer. You just need to change the program that windows uses to open these files in "Microsoft Windows based script host" by using the "open with" command shell when you right click on the vbs files. It's a shame the customer service can not provide this kind of solution, not belittle you or convince you to pay him.

• Satellite M30, screen remains sometimes almost black after start up to several minutes

  Satellite M30, WinXP

  Sometimes, the screen remains dark, which means that you can see that a little bit news startup in the background and also the Office of windows, up to 2 minutes before suddenly become really turned on.
  Not even the latest version of the BIOS has a change. And what's weird, is it still does not appear. A non stop-and-shut-down-start sequence showed that it appears about 2 to 3 times.
  What could be the reason?

  Hi LeTom,

  did you use the os recovery toshiba or a clean install?

  It seems that the display shows a fault, then here are a few questions to play safely!

  There the failure also occure when the Red Toshiba logo appears shortly after starting start?

  If you are using a clean install of the OS, you need to do a complete new installation with the Toshiba Recovery CD (attention all data will be lost, make a backup).
  Then, the laptop is set back to the default settings of the software and if the failure occurred, you should check the material by a Toshiba service partner!

  I think that the M30 is still under warranty!

  Bossi Bye

• iPhone 6s turns off after start upward with 30% of remaining battery

  6 s iPhone will turn off after starting with30% battery left please help

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• WiFi connects immediately after starting

  Hello community,

  I started having Wifi issues after installation LittleSnitch. It would be irrelevant, but that's when the problem appeared. Although I have already removed, the Wifi connection does not seem to operate normally.

  Before that, it would connect immediately after starting, which means instant access to Chrome or any other browser.

  Now, he continues the search for a few seconds, shows an exclamation point on the wifi icon and then finally connects to my network. This process takes more than 30 seconds.

  I tried several solutions spare, change my location, manual settings, DHCP or DNS, wifi diagnostics, reset my router, but all without success. I still can't get it to connect at the same time.

  Any ideas?

  (El capitan)

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• Gray screen after starting the Satellite L50

  Today I received a completely gray screen after starting the Satellite portable L50; the touch mouse moves but don't button start etc. Lap top is only 2 weeks.

  Any advice?

  jade2014

  Hi jade

  It is not easy to say what the problem is here. What did you do when you saw gray screen?
  Is there a possibility to completely shut down windows and reboot the machine?

• Tiara closes 10 sec after start without warning

  ERROR:

  Tiara closes 10 sec after start without warning

  VERSIONS USED:

  DIAdem Version 8.00.981 and
  Measurment OR & Automation Explorer Version 4.5.0f0

  Pay ATTENTION to the DEM_ERRS.001 (German version):
  1 * Fehlerregistrierung'm TT. MM YYYY um hh: mmS [Meldungsdatei:COMMON / Textarea:13 / Textnummer:1]
  Objekt "tc1" unbekannt oder nicht offen.

  FIX:

  disable the windows service: "NI Configuration Manager.

  Thanks for your replies!

  I have now uninstalled all new driver DAQ (mx) and installed the Driver Traditional NOR-DAQ 6.9.3 (including MAX 2.2.0.3010) and DIAdem 8.0 works very well.

• T60 freezes when you move the trackpoint right after starting

  Hello

  I had this problem for quite a long time. Initially, I thought that it was due to an update to Windows XP, but I couldn't find any message on newspapers when the laptop crashes. I reinstalled XP many times to get rid of any incompatibility related to the software, but even with a new installation, it was happening.

  I realized recently after several tests that the problem occurred more frequently when you move the mouse (trackpoint or touchpad) just after the start of the system (cold start or start of hibernation). What I discovered is that this will happen is no longer if I suspend the laptop after starting the system, do not touch the mouse.

  The symptoms are that Windows freezes. No activity at all HD, the system responds to any keyboard and mouse input. If I close the lid of the portable computer system is not put into hibernation. The only way to regain normal operation is pressing the button for a few seconds, then the system turns off, and then turn on normally.

  All the drivers are up to date.

  Someone at - there experience this problem?

  Thank you

  Try to remove the battery... If the battery is dead, it could give you this problem...

• screen turns off after starting

  I have Windows XP Edition family service pack 3 computer desk Dell old to two years. Recently encountered a new problem. After starting OK, the screen of the monitor removed and remained empty after a few minutes (I don't have the time, but it seems to be not in hours minutes). The computer is "on" (I hear the fan), but nothing I could "wake up".  I found the monitor connection and cables were all OK. I could restart by closing with the power switch, power failure, wait a little while and then restart. System worked normally, monitor NSB OK for awhile... and then "deleted again" after a few minutes. To try to solve the problem, I restarted (see above) and then disabled 'power save' and 'Hibernate '; all energy and hibernation is DISABLED. The problem seems to have disappeared; While we're talking the computer stays on normally with normal display, etc. Assuming that the problem is actually related to register and/or hibernate, what I have to live with these features off? Other comments as to what is the problem? Thank you. Matt Sagal

  Hello

  1 how long have you been faced with this problem?
  2 did you recent hardware or software changes to your computer before this problem?

  Step 1: Look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true
  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true
  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

  Step 2: You can try to create a new power scheme and check what is happening.
  Reference: http://technet.microsoft.com/en-us/library/cc771632.aspx

• error starting buvoemd.dll: "the specified module is not found." (please help. some of my games have not worked since this error has been appearing after start)

  This error has been appearing after starting:

  "Error loading C:\WINDOWS\system32\buvoemd.dll".

  The specified module could be found.

  Can we fix this or send me a copy of the module or anything like that?

  (please help some of my games do not have given that this error has been appearing after start)

  Thank you

  There is no file with this name in Windows XP.  It was probably part of a virus or spyware infection that has been partially removed. Run a full scan for virus/spyware.  If the problem persists, use the free Windows Sysinternals Autoruns tool to find and remove the reference to the file.

  For more information about how to use the Autoruns, please see:

  Autoruns for Windows Windows Sysinternals Autoruns Forum

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Menu drop down delayed after initial right click after start.

  When I right-click a file or a menu item the first time after starting it takes 3-4 minutes for the drop down menu to appear. Following clicks right down down immediately. How can I fix?
  Thank you
  Jim B

  Problems with a right-click are generally caused by third-party programs that put an entry in the context menu. To resolve this, the easiest method is by disabling the extensions of third-party context menu with ShellExView free utility.

  http://www.nirsoft.net/utils/shexview.html - ShellExView

  Make a right-click is slow or weird behavior caused by context menus management - http://windowsxp.mvps.org/slowrightclick.htm
  Manage the entries in context menu for folders, readers, and the Namespace objects - http://windowsxp.mvps.org/context_folders.htm MS - MVP - Elephant Boy computers - Don ' t Panic!