RN104 freezes when you make significant transfers via USB 3.0 on 6.4.0

My RN10400 works great since the purchase. However, I have never transferred via USB abundantly; all data have been loaded on the network. Now I have a lot of folders on a drive HARD USB 3.0 that I try to move to the NAS. When I try to copy on it will start at full speed and stays there for about five minutes. It seems then to have overloaded and from 100% to frozen in a fraction of a second. No no warning, no error, just insensitive and frozen. I tried the copy three times with the same result, and I have to remove the power to remit on the. There are no applications installed or running. 6.4.0 ordinary. Whenever I have pull the plug I need to Resync quickly the data on the volume, while this process is getting old.

Any suggestions?

Update: I've upgraded to 6.4.1RC and I still have the same question. A pull the plug to get back on the new =)

Hello, @Learning2NAS

In my case (erratic freezezs when writing large files on the disk).

An upgrade to 6.4.1 RC1 + Factory reset (AKA factory reset under 6.4.1) solved the problem.

As a test I did went back to 6.4.1 to 6.4.0 stable (what joke ;-)) and it froze again immediately.)

If you're up to wipe your NAS, try a factroy restore 6.4.1 before attempting to downgrade.

Please post the result of this, it would help many other contributors

Tags: Netgear

Similar Questions

  • Portege M800-106 the system freezes when I connect a device via USB

    When I connect a device through a USB port, the system hangs. This happened with any device even something that has been used before. Example - if I turn on the printer /plug in my Blackberry to synchronize the .laptop just going so slow that I have to do a reboot with the devices still connected to get the system working again. Running Vista. Any help please?

    Hello

    You see yellow exclamation marks in Device Manager? Maybe a driver isn't installed properly in the system freezes.
    In addition, I would try to remove the USB ports in Device Manager. After this restart your laptop and USB ports will be recognized again.

    Have you tried a BIOS update? If this isn't the case, you should do it. Before you begin the update, close all running programs and make sure that you are logged on as administrator.

    Last but not least try to reinstall Windows using the Toshiba recovery disc. It only takes a few minutes and then you have settings to factory again! :)

  • The files and settings to remove the old computer when you make a file and the transfer settings Wizard?

    The files and settings to remove the old computer when you make a file and the transfer settings Wizard?

    Hi KaraDay,

    When you use the files and Settings Transfer Wizard in Windows XP, it only transfers a copy of the files and settings on the computer.

    How to use the "files and Settings Transfer Wizard" in Windows XP

    http://support.Microsoft.com/kb/293118

  • When you try to FolderLink via Box, I get a confirmation message that the file is downloaded, but nothing happens and after an hour it is still downloading.

    When you try to FolderLink via Box, I get a confirmation message that downloads the file weeding, but the boy until the wheel turns and turns and after an hour or two it is still downloading. At this point I give up. I can download OK directly to their Web site box. He used to work a few months ago. I'm on Thunderbird V 38.2.0

    Instead, you can use Dropbox as FolderLink provider.
    Install this add-on.
    https://addons.Mozilla.org/en-us/Thunderbird/addon/dropbox-for-FileLink/

  • When you make thunderbird with multiline topics pane?

    When you make thunderbird with component topics multiline, like Outlook or Geary?

    I think the Bug 441414 refers. Work has recently resumed, but when he sees the light of day is anybodies guess.

  • How can I fix the audio distortion when you make a video call using Windows Live Messenger

    When you make a video call using Windows Live Messenger I get audio distortion. How can I solve this problem

    Hello WayneMarkham,

    The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

    Windows Live Mail

    Windows Live Hotmail

    Windows Live Messenger

    Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

  • When you look at the performance of a virtual machine, when you make a graphic of 3 months it appears correctly for the first two, but the last month is compressed.

    When you look at the performance of a virtual machine, when you make a graphic of 3 months it appears correctly for the first two, but the last month is compressed.

    Hello

    When you say that the last two months are compressed. I do not have what exactly you mean by that. Is there a chance you can attach a screenshot of the same thing? Also let me know if there are any made VC-database activity recently?

  • Pictures of blackBerry Z10 BB Z10 disappeared when connected to the PC via USB Phone model z10 STL 100-1

    Help on unit Photos and videos not Visible when connected to the PC via USB. I also tried to restart and reinsert the SD card but no response what happens each time I take pictures and try to transfer to the pc via USB please help to recover the photos suggest something?

    ampawase wrote:
    Help on unit Photos and videos not Visible when connected to the PC via USB. I also tried to restart and reinsert the SD card but no response what happens each time I take pictures and try to transfer to the pc via USB please help to recover the photos suggest something?

    "A wireless connection with the mixture, use the file manager, hold Media Card - Photos - 'Shift' or ' Ctrl ' key - select thumbnails - right-click - Save slot - selecting a folder on the pc and save them.

  • MacBook pro freezes when you go to iCloud in Safari

    I have a brand new MacBook Pro (early 2015) with the latest updates of El Capitan 10.11.6. When after sleep, I go to a tab open in Safari with my iCalendar as the macbook freezes everything - mouse is active but nothing else. If it helps, I have a clip of newspapers.

    09/06/2016 09:17:49.746 com.apple.WebKit.WebContent [4340]: [09:17:49.746] err =-16020 (kFigStringConformerError_ParamErr) (key, NULL) reported FigAgglomeratorSetObjectForKey /Library/Caches/com.apple.xbs/Sources/CoreMedia/CoreMedia-1731.15.206/Prototype s/LegibleOutput/FigAgglomerator.c line 92

    09/06/2016 09:17:49.746 com.apple.WebKit.WebContent [4340]: [09:17:49.746] err =-16020 (kFigStringConformerError_ParamErr) (key, NULL) reported FigAgglomeratorSetObjectForKey /Library/Caches/com.apple.xbs/Sources/CoreMedia/CoreMedia-1731.15.206/Prototype s/LegibleOutput/FigAgglomerator.c line 92

    09/06/2016 09:17:49.748 com.apple.WebKit.WebContent [4340]: [09:17:49.748] err =-16020 (kFigStringConformerError_ParamErr) (key, NULL) reported FigAgglomeratorSetObjectForKey /Library/Caches/com.apple.xbs/Sources/CoreMedia/CoreMedia-1731.15.206/Prototype s/LegibleOutput/FigAgglomerator.c line 92

    09/06/2016 09:17:54.801 WindowServer [182]: Surface denied test updates for tent 10 sequential...

    09/06/2016 09:17:54.822 com.apple.WebKit.WebContent [4340]: [09:17:54.822] < < < < owner > > > > figPlaybackBossPrerollCompleted: unexpected preroll-complete notification

    09/06/2016 09:17:54.822 com.apple.WebKit.WebContent [4340]: [09:17:54.822] < < < < owner > > > > figPlaybackBossPrerollCompleted: unexpected preroll-complete notification

    09/06/2016 09:17:54.823 com.apple.WebKit.WebContent [4340]: [09:17:54.823] < < < < owner > > > > figPlaybackBossPrerollCompleted: unexpected preroll-complete notification

    09/06/2016 09:17:59.000 kernel [0]: class ring not found no ring clearly guilty

    09/06/2016 09:17:59.000 kernel [0]: 00000000 0x00000000 0x00000000

    09/06/2016 09:17:59.000 kernel [0]: 0x0001c200: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000

    ….

    Hello alex_imac_owner,

    Thank you for using communities of Apple Support.

    If I understand your post as your MacBook Pro crashes after waking it from sleep mode. I know how it is important for your MacBook Pro to run smoothly for you. I recommend the first restart your Mac in Mode safe and test it and then restart as usual and test again.

    Try safe mode if your Mac does not end commissioning

    Start in safe mode

    Follow these steps to start in safe mode.
    Start or restart your Mac.
    As soon as you hear the startup tone, hold down the SHIFT key.
    Release the SHIFT key when you see the logo Apple appears on the screen.

    Best regards

  • Qosmio X 500-110 freezes when you watch 1080 p video

    Hello to everyone

    Today my Qosmio freezes when I was watching 1080 p video from YouTube. After that I tried to watch wild life HD in Win7 it became same.
    I do not understand these issues. Have also always print from Bluetooth and cam is disconnected after awhile. There are several ways to obtain the necessary on the software...
    You have this live problem? Thanks in advance...

    Hello

    Maybe you're using an older version of driver or something else... But that s strange. This only happens with HD videos or normal videos too?

    In your case I update the chipset and display driver. The two you can download from the European driver of Toshiba download page.
    Check this box!

  • Skype freezes when I make a call from the 6.0 versions

    I need help, my Skype on my pc freezes when I try to close Skype. I need help because I talk through Skype to friends I play with.

    I suggest to update the following drivers to see if anything changes:

    Latest AMD generic display drivers
    http://www2.ATI.com/drivers/14-4-Win7-WIN8-WIN8.1-64-DD-CCC-WHQL.exe

    Latest drivers for generic Intel HD display (3000) *.
    http://downloadmirror.Intel.com/23764/A08/win64_152822.zip

    Provided Setup.exe cannot install. If this is the case, you must install them manually by navigating to the graphics drivers in the package. Intel has even done a FAQ on this type of procedure. http://www.Intel.com/support/graphics/sb/CS-033916.htm

    Last Realtek generic drivers audio - High Definition Audio codecs (software) - 64 - bit driver Vista/7/8/8.1
    http://www.Realtek.com/downloads/

  • IE7 freezer when you navigate to a new page on the Satellite A215-S4697

    Hello

    I just bought an A215-S4697 three days ago. Love the computer so far, except for one question. Every so often, my internet explore freezes when navigating to a new page or by clicking on a link. Can I open another IE window when that happens, but I have to use Ctrl-Alt-Del to close the trial.

    If anyone has had a similar problem and know how to fix? I think maybe one of the programs of Toshiba is the cause, but that's just a guess.

    I read somewhere about software of fingerprint reader update which fixes a similar problem, but my machine doesn't have a fingerprint reader.

    Any help would be appreciated. Thank you.

    Hmmm, I also read on the issue of Internet Explorer and the software of fingerprint authentication.
    Found this
    http://support.toshiba-tro.de/KB0/TSB6701I80004R01.htm

    An update of the software of fingerprint authentication helped solve the freezing of EI.

    But as you say, this software is not installed on your Satellite.
    In your case, I recommend reinstall Internet Explorer on your computer. Maybe it helps.

    PS; Have you tried to use the internet browser Firefox?

  • T60 freezes when you move the trackpoint right after starting

    Hello

    I had this problem for quite a long time. Initially, I thought that it was due to an update to Windows XP, but I couldn't find any message on newspapers when the laptop crashes. I reinstalled XP many times to get rid of any incompatibility related to the software, but even with a new installation, it was happening.

    I realized recently after several tests that the problem occurred more frequently when you move the mouse (trackpoint or touchpad) just after the start of the system (cold start or start of hibernation). What I discovered is that this will happen is no longer if I suspend the laptop after starting the system, do not touch the mouse.

    The symptoms are that Windows freezes. No activity at all HD, the system responds to any keyboard and mouse input. If I close the lid of the portable computer system is not put into hibernation. The only way to regain normal operation is pressing the button for a few seconds, then the system turns off, and then turn on normally.

    All the drivers are up to date.

    Someone at - there experience this problem?

    Thank you

    Try to remove the battery... If the battery is dead, it could give you this problem...

  • Pavillion dv7 laptop win7 freezes when you unplug ac pwr, need to start, will not start on the MTD

    I just bouht this laptop 2 months ago. It has been refurbished. Initially he had problems running and I have to hard start a few times to get it going.  I followed some instructions a previous forum solution sp44983 17/10/12, and it seemed to work.

    I have problems with the gel to the top when I unplug the AC adapter. I followed some other instructions of the forum which was from may 2012.

    10/05/2011-14:32

    Re: Anyone at - he discover blank (black) screen & freeze after cutting off the power supply, then reconnectOptions

    In the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER. sfc/scannow (note there is a space between sfc and /) leave the entire process, then type exit and press ENTER.

    Then, stop the laptop, unplug the AC adapter unplugged, remove the battery and then press and hold the power button for a minute.

    Now plug the power adapter without the battery inserted, start Notepad, open windows control panel, open Device Manager, expand the entry for batteries, click right on and the Microsoft ACPI compatible with battery control method and select uninstall - do not uninstall anything else here.  When the uninstall is complete, shut down the PC, unplug the AC adapter, reinsert the battery and then start the PC on just the battery.  Windows will automatically reinstall the driver - leave Windows running for a few minutes. Shut down the PC again.  Now plug the power adapter (with the inserted battery always) and start the laptop to see if it helped the issue at all.

    Download the graphics driver on the link below Installer and save it on your desktop. ftp://ftp.HP.com/pub/SoftPaq/sp52001-52500/sp52242.exe once the download is complete, right-click on the Setup program and select "Run as Administrator" to launch the installation.  When you are done, reboot the laptop.

    Sorry for you so

    Product name: HP Pavilion dv7 Notebook PC

    Windows 7 Home Premium 64-bit Service Pack 1

    Serial number: {content removed}

    Product number: A7B11UAR #ABA

    Has been no change. I have

    See you soon,.
    Shane

    After doing some research on this issue, that's what I could find. The problem is caused by the regulatory basis on the motherboard chips when they become defective. When these chips become defective, it fails to regulate the proper voltage required by the processor, causing the processor to this effect a malfunction when a card is inserted in the power socket.

    Your best bet would be to take it to a computer repair shop that can repair it for you. If you are in warranty, I would contact HP to fix it for you.

  • Premiere Pro freezes when you import MTS media

    Hello everyone, I have a problem with my Premiere Pro when you import MTS media.

    Last week, I had no problem with this situation. The files are very large, 4 hours of images and about 20 GB, no problem with the import and export, not even an offset when editing.

    But for the past 4 days, I had this problem with the same videos, I try to import their dragging and everything but my guard freezing program and then crashing, I can't with other video formats, just the Multilateral trading system, I work with. I read a bunch of solutions, but they do not work for me. I tried to uninstall and install the first, but nothing. I think it had to do with the last Adobe cloud update, but I'm not sure.

    IM using Windows 10, but as I said before, this has not happened before. I don't know what to do, I hope someone can help me, please.

    Thank you all for the help, you are kind enough to help me.

    I contacted Adobe support and they told me it was a problem with the update, and it would be fixed by the following.

    What I did to just reinstall the previous version. The MTS files worked smoothly, do not freeze import.

    I appreciate your help and the time you took to answer my question.

    Thank you for everything.

Maybe you are looking for