RNDU2000 problem after factory reset

Similar Questions

• [SOLVED] A3500-FL problem after factory reset

  After a hard reset / factory reset I have boot, but after that, all I see is a black screen with a rotating circle / turning point in the middle.

  I can access the notification area, but I can't access settings or Launcher.

  help, please!

  P.S. I read this drug on this model and could not find a solution. Any help will be much appreciated

  AMAZING!

  the problem was that I was holding the tablet in portret orientation while it starts.

  So, I've ACCIDENTALLY keep it in LANDSCAPE mode, and voila! He seized the allowed parameters. So easy!

  I hope this will help others

• Model: 15-r53cl: problems after factory reset

  Hello, I need help. After I factory zero my PC, and when it turned on it was blinking symbol hp for about 30 seconds. Then things would turn black screen, then I see the hp symbol and this continues to repeat. Can someone help me, thanks.

  Hi @Jd5400,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked into your problem on your 15 HP laptop and having starting problems.  Try to make a hard reset.
  
  When you perform a hard reset note remove all USB devices. Disconnect all non-essential devices.
  
  Hereis a link to computer does not start for Windows.
  
  Plug the adapter directly into a different wall socket. Do not connect it a power strip, surge arrester, or secondary power source as this could cause and issue.
  
  Please let me know how it goes.
  
  You can say thanks for trying to help by clicking on the Thumbs Up below! .
  
  Thank you.

• Windows detected a hard disk problem after factory reset?

  I have a Toshiba Satellite C855D-S5320, not old at all. I tried to download a game and then got the BSOD. I had to reset my PC, lost what I had, but ended up from scratch. Now, every so often, I get a message saying "Windows detected a hard disk problem. Back up your files immediately to prevent the loss of information... ». I have right click the disk hard "defective" for the error checking, no errors found. I tried HD Tune Pro, and tells me 'Warning' for the State of health (05) reallocated sector count (failure) is red, and number of events (C4) reallocated (warning) is yellow. Does this mean I have to replace the hard drive? The computer was working completely fine until BSOD. Now it works and everything but I get this error message. The laptop is not only really old and never any injuries, but perhaps past warranty. I really have nothing left to save, because I lost everything when I have to reset it to factory State. Any advice?

  It's really up to you.  Sometimes there may be false positives, but it looks like your drive is really having some problems.  It was even the cause of the BSOD, who knows.

  You can follow the steps of my colleague here to check your drive for errors:
  http://www.eightforums.com/tutorials/6221-chkdsk-check-drive-errors-Windows-8-a.html

  But really, I would take the advice and replace the drive.  Or at least be prepared for this 'die', then save your files somewhere else like OneDrive or something so you don't lose important information when it does.

• Droid Razr UI after factory reset is different.

  Hi all

  I was faced with problems similar to this (Gallery crash after update OTA ICS)

  https://forums.Motorola.com/posts/61d8193cf3?start=46&stop=60

  I've been following the thread and did a reset.

  Now, I find that the problem is solved, but the user interface after factory reset is different from the original user interface that comes with

  Update of ICS. I kinda like the previous user interface. I guess it's Motoblur. Is it possible to get that back.

  Thanks in advance.

  ~ Satish.

  
  

• After factory reset, I can not connect my iphone6 with itunes

  After factory reset, I can not connect my iphone6 with itunes

  What happens when you try? You get errors? -AJ

• If I used a creative combination on an old computer, then installed in my new computer but had to do a factory reset on computer; I could still install Creative suit on the same computer even after factory reset with the CD?

  If I used a creative combination on an old computer, then installed in my new computer but had to do a factory reset on computer; I could still install Creative suit on the same computer even after factory reset with the CD?

  Yes, you should be able to reinstall, but if you can you should disable before resetting the machine.  Otherwise, if the two license activations were used and no reset you will need to contact Adobe Support by chat and ask them to reset your activations.

  Chat support - the link below click the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• HP ENVY m6-1125dx: Beats Audio In/Out-put pilot missing AFTER Factory Reset/OfficeProgram reinstalling Windows

  Hello

  So about three months ago I had a problem with my HP mouse and browser. both were glitching on screen and does not allow me to type consistently or right-click (to copy, paste, etc.). After seeking help from technology College friends, HP reps (which were not useful since my ch isn't under warranty anymore) and work friends, no one would understand it. I decided to make a setting reset according to which did not help. Then, a factory reset. Finally, it fixed my problem, yay no glitching more! So I contacted Microsoft to reinstall my Microsoft Office. After I have reset a computer and everything was in order, I hung up with them. By attempting to play a video a few moments later, I noticed that my volume is not working. I tried through the Troubleshooting Device Manager (replied 'No audio device found'), by lifting missing audio drivers via the HP Web site (found nothing) and call Microsoft to see what they could do since HP reps no help. So far, no progress is possible except that Microsoft has discovered that he is no longer an audio in/out located on my device. This is absurd! My laptop was purchased 2 years ago for around $500 with award-winning special Beats Audio Sound System. I want to come back. I was forced to resolve the previous question myself and I wa slucky enough to find a way. But now, I am presented with an audio problem I'm afraid that I can't solve in my favor.

  If someone who comes through my investigation has informed business and education with a solution to the please my problem do not hesitate to contact me with your advice and your credentials. I'm willing to try anything at this point, but of course not at the expense of my computer. Experienced responses welcome!

  I hope someone can help me. Manager Microsoft is kind enough and plans to call me again today at 15:00. But, I really don't think there is anything else on our end that we can do. It's all HP to reinstall the audio driver Beats for me once again.

  Thanks in advance.

  Hello

  I do not work for a hardware or software company. Since your machine drivers support site, available for Windows 10, only the drivers that came with your machine (for Windows 8). Driver for Windows 8 above should work as ask you 'pilot missing AFTER factoryreset/windows.

  Kind regards.

• HP ENVY 15 3014 TX - NO SOUND AFTER FACTORY RESET, WON'T ALL THE DRIVERS INSTALLED.

  Hi my name is ali majaz, I recently did a reset on my phone, because there was a sort of Malware or viruses, which froze my device just after startup, so I did a factory reset with HP Recovery Manager, now the problem is that all things are restored, but even after installing the audio driver, the high defination IDT and Intel(r) Audio display the sound does not work, everything seems perfect, AUDIO troubleshooting gives no error, there is no mistake anywhere, even the speaker in the taskbar icon looks exactly as it should be, but when I play anything, there is no sound, games, but I hear nothing, I tried all the tricks in the book , but nothing works, I chose speakers & headphones that my default device, but nothing works, no sound at all, no system sounds, no sound in youtube, I don't know what to do, I tried to install all updates but nothing works, I doubt there is a sort of breach of registry in my machine , but after resetting it should have disappeared, SO if IT YOU PLEASE help me

  LOL OK SO A HAPPY FINALLY ENDING, I DO NOT KNOW HOW, COZ I TRIED SO MANY THINGS, BUT I JUST SWITCHED OFF THE MACHINE AND OPEN THE REAR HOOD, JUST DID A HARD RESET & BAM!  I TURNED ON AND THE SOUND WAS THERE, I DON'T KNOW HOW IT HAPPENED, MYA BE THERE WAS A BAD PROFILE CONNECTS AUDIO SERVICES SO I CHANGED IT BEFORE CLOSING DOWN, WITH NO HOPE IT WILL FIX IT, BUT I GUESS THAT IT IS WHAT SETS THE SOUND, NEVER LESS... IT WORKED... I'M SO HAPPY

• After factory reset, cannot download KB2868116

  Hi, on a factory reset on my lap top and after taking advice on this forum "CT", I was able to download all windows 7's updates except for KB 2868116. It show the error 800b0100 code. Can anyone tell how to solve this problem.

  Hello

  To help you in your query, you can check the following:

  • Open the Windows Update Troubleshooter
  • Article on error 0x800B0100 when updates installed by Windows Update or Microsoft Update.
  • SFC scanner. Analysis (sfc) System File Checker will Windows replace corrupted or missing system files on your computer.

  Scan SFC enforcement procedure:

  1. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. Click on continue or provide administrator credentials if prompted.
  3. In the command prompt window, type the following sfc/scannow and press ENTER:

  Refer to this article for more information.

  Let us know how it goes.

  Thank you.

• Problems with factory reset on a Packard Bell

  Hi cox.haley1,

  After a Microsoft update Tuesday May 13 laptop Packard Bell Easynote TK85-GN-051UK of my granddaughter had a huge problem with the start-up that could only be ordered with a Factory Reset. Finally I had all this work and re-installed all software programs. Several days later, after update of Microsoft more, another problem arose that could only be fixed again with a Factory Reset, so I had some things to begin to repair, but it got stuck in the Installation of the software... Install Office 2010...33/45

  18hrs. later he was still stuck there.

  I sent to Packard Bell for re-installing operating system Windows 7 DVD & utilities drivers & Applications DVD... Incl. postage. £37.

  They have not worked as once more stuck in the same place.

  Packard Bell is a Dutch manufacturer and a subsidiary of Acer will help so I don't need to waste money on recovery discs.

  Can anyone suggest something to help please?

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/Windows-cannot-complete-installation-in-safe-mode/5e913a56-B29B-4386-A462-20e1991a1edc#LastReply

  Thank you. All sorted now. There is a corruption of Microsoft Office files. Formatting of hard disk. Re-installed my Windows 7, etc and then all software, updates everything and now all is well again.

• Slow start even after factory reset

  After significant problems, mainly increasing the response slow time, which no longer responding, slow start, not being not able to uninstall the software and do not restore to any point windows recovery, I performed a factory reset.  I was running Kaspersky, Eset and Malwarebytes - I think that this is the final fall of the computer, but it has never been declared malware that has not been set.

  The problem is, even after the factory reset with NO other programs installed, I'll still have a slow start.  This should not be the case, right?

  I don't know what information you need to help me understand this.

  I am running Windows 7 Home Premium 64 - bit OS

  Dell XPS

  8 GB RAM

  2.1GHZ processor

  Do I need to take for professional diagnosis?

  Hello

  Thanks for choosing Microsoft Community

  Download HD Tune Pro from here and install and test the HARD drive

  If the test result will be put into custody, Contact Dell for HDD replace. I hope that the HARD drive has gone bad

• Can not connect to web access SX20 after factory reset

  Hi all

  I have a problem when I reset factory SX20. I finished off SX20, then hold the power button for 10 seconds until what he puts to Flash. Then press the power button twice. I don't know it have already been reset factory state yet.

  But after this, I can not connect by web access. I can ping to SX20. but I can not connect on the Web or Telnet and I don't know what are the admin user and the password.

  can you help me for this?

  Please, help me to check it out.

  Thank you all

  If you are able to navigate to the login screen by using a web browser, the default username is "admin" without password.  Telnet is disabled by default.

• phone unlocked even after factory reset?

  I am moving to a new iphone and sell my old, I'll do a factory reset to clear all of my information from my old 5 c which has been unlocked by my EA service provider, this phone will always be unlocked after the reset?

  unless a device was unlocked by jailbrake it will never get locked again

• After factory reset is all gone

  I'm selling my Mac Air have done a factory reset and reinstalled the operating system of El Capitan. I just want to be sure I'm sure forgot to sign out of iTunes before performing these operations.

  It is now possible for the new owner to see my browsing history, keeper password etc, or everything is completely erased?

  You must wipe the drive and install the version of Mac OS X that came pre-installed. You can not move from El Capitan to the next owner unless you are willing to provide also your Apple ID and password.

  Make sure that you allow out of your computer in iTunes:

  Exercise

  You can disable allow individual computers, but only using these computers. The only other option is to allow "overall" your iTunes account.

  1. open iTunes on a computer

  2. from the Store menu, choose 'View my account... '. »

  3. sign in with your Apple and the password.

  4. under 'Computer permissions' select ' All of authorize.

  5 allow each computer you have, you might need.

  You can do this twice a year.

  After you 'off to allow all' your computers authorized, re - authorize each of them according to the needs.

  If you have authorized out of all computers and had to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - contact us.

  For more information on the authorization and permission removal: iTunes Store-Authorize or remove approval from your Mac or PC.

  What to do before you sell or give away your Mac - Apple Support

  
  

  Before you sell or give your Mac before Lion

  Follow the instructions until you get to step 5:

  What to do before you sell or give away your Mac - Apple Support

  When you reach step 5 of the above, you will need your Snow Leopard or earlier installation disc that came with the computer when it was new.

  1. Follow these steps to install the original version of the operating system that came with the computer.

  1. start the computer using the Snow Leopard installation disc or disc 1 that came

  with your computer.  Insert the disc into the optical drive and restart the computer.

  After the ring, press and hold the C"" key.  Release the button when you see

  a small gear appear under the dark gray Apple logo.

  2. once the load setup program select your language and click continue

  button. When the menu bar appears select utility drive in the Utilities menu.

  After disk utility charges select the hard disk entry in the list on the left (mfgr. ID and)

  size of the disk.)  Click the Partition tab in the main window of THE.  Set the number of

  partitions to one (1) from the Partitions of the dropdown menu, click on the Options button

  GUID, click OK, and then select define the Mac OS Extended format type

  (Journaled), then click on the apply button.

  3. when formatting is complete FROM and return to the installer.  Move forward

  with the installation of OS X and follow the instructions included with the installer.

  4. If you plan to sell or to give to your remote computer, then proceed as follows:

  Once you reformat your hard disk and reinstall OS X, the computer restarts with a

  Screen of welcome and you prompt to choose a country or region. If you want to leave

  the Mac in an out-of-box state, do not continue with the configuration of your system. Instead,.

  Press command-Q to stop the Mac. When the new owner turns on the Mac,

  the Setup Wizard will guide them through the configuration process.