rotation and translation cut image

Hello

I have an image that needs to be turned on a semicircle.

{Of container

horizontalAlignment: P

ImageView {}

imageSource:"asset:///images/straight.png".

pivotX: 0

pivotY: 56

translationY: 0

rotationZ:-90.0

}

When rotationZ is undefined is displayed correctly, but by applying a rotation it is cut. How to set the translation so that it shows not entirely

Hey there...

Your problem is perhaps not your translation.  It may very well be the container that you have your ImageView.  The ImageView is turned, while the container size remains fixed. Increase the horizontal size of your container and see if that helps...  Maybe use minWidth or preferredWidth...

-Edit-

Or same rotationZ container itself and see if the ImageView inside spins too... eh...

Tags: BlackBerry Developers

Similar Questions

  • How to cut and paste the image of the body of the received email

    I'm trying to cut and paste an image included in the bottom of an email and insert it into a Word document so that you can size and print. I can highlight, cut it with Ctrl C, paste it into the document Word with Ctrl V, but the image doesn't show, although the picture frame appears when I click on the place where the photo was pasted. Framework, but empty, no image. Any thoughts?

    Thanks to everyone for their help.

    The problem has been resolved - to try and finally understand everything.

    If you encounter this problem, it is perhaps because, unless you know the file format of the inserted picture, programs can not figure it out for you. Place your cursor on the image, right click and save the image under a .jpeg instead of simply copying. Then work with the file .jpeg in any photo management program you use normally - or even insert it in Word.

  • Rotate and move the 16-bit Image

    I would like to rotate and move a 16-bit RGB (U64 in LabVIEW) image.  The IMAQ turn and shift functions do not accept this type of image, but they do not accept an image in 16-bit grayscale (I16 in LabVIEW).  Unfortunately, this clips all values in my original image since it extends from-32, 767 to + 32 767.  The ExtractColorPlanes function requires a 16-bit image to be wired as the destination image but the IMAQ create VI does not U16 to create image.

    Any ideas?

    Just to be proactive... Here is an example of the problem.  I tried to download a (small) 16-bit tif, but is not a valid extension to download.  Photoshop allows me to record a 16-bit RAW, TIF or PSD: none of which can be downloaded.  Sorry for the inconvenience.

  • How image rotation and displacement by using different origins

    Hello
     
    I use LabVIEW 8.5 and 8.5 of Vision.
     
    I need to rotate, scale, and move a 2D image regarding one aspect of the image. I use IMAQ turn and shift, but I don't know what is the point of reference or originally used in this function. The coordinates of the image is very important in my application because I need these details to complete the recording of the image.

    My question is as below:

    (1) the origin (0,0) of an image is located in the upper left corner, can I change it to the center of the image?

    (2) how can I specified a certain point (coordinated) as a reference for the rotation and scale?

    Your help is very appreciated. Thank you.

    Hello

    Thanks for the idea, I'll try it soon.

    Best wishes

  • It seems that wrapped text will not host photo resizing without cutting and pasting the image resized, is - what the Muse way is suppose to work?

    It seems that wrapped text will not host photo resizing without cutting and pasting the image resized, is - what the Muse way is suppose to work?

    It would be the default path to wrap the text with the image when you work in Design view.

    This document explains more:

    https://helpx.Adobe.com/Muse/using/wrapping-text-image.html

    Thank you

    Sanjit

  • Dynamic tab Shell cut Images and text

    I use the Shell dynamic tab on a page and try to get a few images-links and output text display correctly in the global toolbar.  I want the links to the image on the left side of the toolbar and the output on the right side text.  The problem is the pictures are cut off and the text is envelope in a small space and is not entirely legible.  The images are 32 x 32 pixels.  Should I resize them to something smaller?  I tried to use small images previously, but it seems simply push down and still cut.

    The full text of output must be "logged in as: username", but it is force into a small space and cutting the username like this:

    Connected

    as:

    username (this line is not visible in the toolbar)

    Here is my code.  Any help is appreciated.

    ...

    "< af:pageTemplate viewId="/oracle/ui/pattern/dynamicShell/dynamicTabShell.jspx "value =" #{bindings.ptb1} ' "

    ID = "pt1" >

    ...

    < f: facet name = "globalToolbar" >

    < af:panelGroupLayout id = "pgl5" layout = "horizontal" valign = "top" >

    < af:toolbar flex = '1' stretchId = 'stretch1"id ="tb1">

    < af:group id = "grp1" >

    "" < af:commandImageLink text = "' actionListener =" #{tabmanagement.dashboardSelected} "id ="cil1"icon="/images/AsIconDashboard.png "partialSubmit ="true"/ >

    "" < af:commandImageLink text = "' actionListener =" #{tabmanagement.toggleSelected} "id ="cil2"icon="/images/AsIconToggle.png "partialSubmit ="true"/ >

    < / af:group >

    < af:spacer id = "stretch1" width = "10" height = "35" clientComponent = "true" / >

    < af:outputText id = value = "#{tabmanagement.loggedInAsText}" / "loggedInAsOT" >

    < / af:toolbar >

    < / af:panelGroupLayout >

    < / f: facet >

    ...

    Move text output of the globalToolbar facet in the facet globalSearch fixed problems and gave me the results:

    ...

    Icon="/images/AsIconDashboard.png" partialSubmit = "true" / >

    Icon="/images/AsIconToggle.png" partialSubmit = "true" / >

    ...

    ...

  • rotate the video cut off my head! : (

    I'm puzzled. I already have a video that was taken in the direction 'portrait', instead of 'landscape' (normal mode).  When editing, I had to turn each clip that was easily done.

    Now, I'm back to do more editing with new images, but the same device, same direction, same everything.  But none!-when I rotate 90 degrees to the right (as I did before) the video cuts now to the upper part of the image.  That's where my head is - MORE painful!

    Anyone know what I'm doing wrong?  I enjoyed my head for many years, it would be a shame to lose now :))

    Headless in Fresno,

    Bruce Ratcliffe

    Bruce

    I think I got the reason lost head. You all had the same 0026 and 0038 except... I think you saved the good and the bad in orientation portrait with different distances of the interlocutor (or ups closer). Therefore, in portrait orientation, there are more wall in the frame located above the speaker's head in 0026 that he didn't there 0038.

    With HD 1440 x 1080 anamorphic 16:9 project, you will get a space of 1920 x 1080 (landscape) in the editing area monitor. So, when you rotate the portrait oriented 0026 and 0038 turn right, you are going to lose sight of the content going 1080 x 1920 1920 x 1080.

    Compare... portrait 0026 and all this wall over the speaker's head space in the display of 1080 x 1920 (adjustment of the bounding box of note)

    with portrait 0026 turn right and with the not seen parts upper and lower... (note that the adjustment of bounding box)

    you have lost sight of the contents of the frame up and down... but you got room to spare at the top to speak not lose his head.

    Now the same thing for the 0038 not so good (1080 x 1920 display)

    with the right Rotate

    Solutions

    If you don't want to remake the records, click and drag the image of 0038 on the screen (in the bounding box) down to move the head in sight, but you're going to move content out of sight down. So, then put the best image you can to get everything...

    Please consider and let me know if the above explains your results and gives a possible way to save what you've recorded recently.

    RTA

  • Animate using rotation and the puppet tool. Continuously rasterize mess it upward.

    In After Effects CC... Trying to animate a vector arms using rotation and the puppet tool. The animation looks good until I hit the button to rasterize continuously on this layer. He then gets distorted and cut out. I need to be continuously rasterized, so it's not pixelated.  Any suggestions on how to solve this would be great.

    In simple terms the effect of pupet pin uses space Composition and an alpha chanel of the first image to distort the pixels on the screen. So if you move or change the position or scale of the pixels after the first image to the assistance of any transformation or the effect, you now moved the original source of the pixels and puppets pin breaks. That's how the effect is designed and it's the only way it works.

    There is only a single correct workflow. Set up a model that is large enough to include all of the image that you want to animate when played back on the scale of 100% or a distance from the unit corresponding to the value of the camera zoom, if you size your layer of pine puppets if used in a comp. 3D IOW exceeds 100 percent in the final model, your computer is not big enough , or in a 3D model, if you want to move the camera at 1/4 the distance of the Zoom value of the camera to the layer of puppet pin your model of puppet PIN must be 4 times bigger.

    Animate the effect of pin puppet

    Bring the composition of spindle of puppets in yoiur main composition and apply other effects, transformations or any other manipulation, you need to perform to achieve your desired results.

    Puppet PIN is designed for this workflow and when used properly it is a very practical tool.

  • Size and align the Image with Perspective Warp

    How do you get an image to the size and align it with the perspective distortion, unless I approach this wrong?

    You don't say how you approaching.  If something has a look of perspective.  He has a perspective not shape, size and resolution.   First of all, you need to resize the image to the size of the shape's aspect ratio. the boundaries of the shape. Hide the image resize to this form. Perspective transform the layer just perspective-looking mask.  And also to position the layer.

    To tell the truth do not know how to automate all this.  Automate everything resizes images for the limits of the perspective transform the final location of the image.  I align the image resize without perspective the limits of location and hide the image to the shape in the image of the perspective transformation.  I finished the automation here.  I leave the user with the responsibility to transform the layer to add the look of the perspective and rotation. I have no idea how to do to automate rotation and the appearance of perspective or create to a template that can be filled with automation of Photoshop.

  • I just installed menu 24 Firefox and Gmail (Search Images cards Play...) have disappeared. How to restore this menu?

    I just installed menu 24 Firefox and Gmail (Search Images cards Play...) have disappeared. How to restore this menu?

    If it's the black navigation at the top that you bar look, we're sorry, that it has nothing to do with firefox.

    For your information

    The bar is removed by Google, Google updated their menu bars, as last week check out this article for more information http://techcrunch.com/2013/09/19/googles-new-app-launcher-style-navigational-menu-weeks-away-from-launch/

  • Copy and paste the Images NOT working.

    When I click with the right button on an image and choose 'copy image' and then try to paste in my editor, all I get is a string of text that represents the location of the image, as if I had chosen 'copy image location' instead. What gives?


  • Qosmio G20 and Acronis True Image

    Hello

    I have a G20 with the media library and twin 100 GB hard disks that are configured to act as two separate discs (set up of RAID options when I reinstalled the system). I have programs on a disk (C) and the operating system and my data on the other (D).

    On a previous thread I asked to retrieve the C drive only from the recovery disks without wipe data on the D drive, and it seems that this is not possible, to remedy this, I decided to follow the suggested advice and create an image of the C drive for later retrieval if necessary. However, I have had a problem of creating an image or a clone of my system using Acronis True Image disk and wonder if anyone can help. I replaced the D drive with a new disk of 120 GB and uses the old drive in a USB enclosure sata to store the clone or image recovered.

    First of all, all devices, readers ext usb, wireless keyboard, cable network & second screen are connected through a hub to a USB docking station, and when I try to clone with this joint, it fails to restart. Undeterred, I took off the hub and the clone for the external drive seems to work very well. However, when I remove the drive from the existing system and replace it with the clone to test, it does not work. The system appears to start but then get the screen where it says windows windows had a problem and I want to start in safe mode, last known working system, or start as usual in any case. If I select it just reboots and gets back to this screen.

    Also, I tried to create an image rather than a clone and recover the image on the hot spare. Once again, it seems to go ok but when I put the disc and satrt to the top of the same thing happens.

    I don't know if there is anything that you must close before imaging or cloning as the instructions don't say, so don't know if theres nothing running that may affect it. The instructions are pretty basic but seem pretty simple, so I do not see where I am going wrong.

    Does anyone have experience of this type of problem and how to fix it.

    Thank you very much

    A few months ago I acquired a regular copy of Acronis True image for my G20.

    After that many negative attempts to use the program, who do not recognize the disks
    I asked for help using Acronis
    which solves the problem brilliantly, sending me a special version on purpose
    for the difficult features of the Qosmio system.

    If you an e-mail to the Acronis media, they probably have in the Archives of the version
    for the Qosmio G20.

  • retrieve and record continuous images in labview

    Hello

    I use the NI 1744 smart camera to capture and record continuous images of a moving object. My smart camera is detected in MAX and made the seizure of an image. But when I use the attached file of VI in labview, the smart camera is not detected, only the webcam is detected and a video can be generated using the webcam. Please help me detect the NI 1744 smart camera. I will be grateful.

    Hello

    Your smartcam is not directly accessible from your PC because it is a remote device.

    Create a project in real time to access your camera.

    Have a look here: http://forums.ni.com/t5/Machine-Vision/Error-1074397145/m-p/535230/page/2?view=by_date_ascending

    Concerning

  • PCI-6025E (DAQ) and cards-1409 (Image Interface) PCI

    Hi friends,

    I have PCI-6025E (DAQ) and cards-1409 (Image Interface) PCI installed on the Windows XP desktop, that connected to the deducted Mikron camera.

    Recently I spend my Labview to 8.6, but the Mikron camera installation software does not work.

    How can I solve the problem?

    Anyone have the installation software (PCI-6025E (DAQ) and cards-1409 (Image Interface) PCI)?

    Any suggestion is appreciated.

    Thank you

    Jack

    jackp6,

    For the 6205E you will need to download an install the Drivers OR-DAQmx which you can find here:

    NOR-DAQmx

    http://Joule.NI.com/nidu/CDs/view/p/ID/2214/lang/en

    The 1409, you must NEITHER IMAQ drivers that are included in the following the Acquisition of vision available here:

    NEITHER Vision Acquisition Software 2,010.08

    http://Joule.NI.com/nidu/CDs/view/p/ID/2137/lang/en

    Please let us know if you have any other questions.

    Kind regards

    Sam K

    Technical sales engineer

    National systems

  • Object to detect and record the image of the object

    Hello

    I'm trying to detect the object and save the image. However, the programming can sometimes do as request and sometimes impossible. Someone know how to ensure that this programming is stable? My programming is attached. It is using pixels to detect the object when he gets to the Center.


Maybe you are looking for