Rotation of the PIN wheel

Similar Questions

• Wheel rotation during the passage of the apps

  Hello

  I frequently meet the spinning wheel during the passage of the apps. For example an app can do one, but open window have not been used for a while and then when I click on the window to use it I get the wheel spinning for a few seconds.

  I am running Yosemite 10.10.5 on a MacPro Mid 2010) with 16 GB of ram and 12 GB available on the 300 GB SSD drive. I just realized that maybe space on the boot drive may be the cause, so I'll empty now and update if there is no change.

  Also, my SSD is a 500 GB Samsung SSD 840 EVO media and I think that the TRIM is not enabled? I read that TRIM was not based with SSDS of third party on my machine and was picking up information contradictory as to the time it was a problem or not. The lack of TRIM could be the cause of the spinning wheel?

  Duane

  You ran a 'cleaning', 'optimize' or 'speed up' apps on your Mac?  Have you installed an antivirus software?

  The 12 GB of free space must be sufficient and not to be the cause of the problem. Don't let him get any small however.

  

• YET CS6 - glued pine Wheel Mode when importing video files simple

  STILL, CS6 - glued pine Wheel Mode when importing video files simple. I'm having the exact same issues on my IMAC (end 2013) and my MacBook Pro (late 2009). I'm on day 2 of this. STILL worked very well last week and I was told no upgrade or modules from. Any help would be greatly appreciated.

  NM

  Adobe has NOT made the decision to stop the upgrade again... see #8 here because why http://forums.adobe.com/thread/1337952?tstart=0

  If you want to use again, you must have an operating system supported... and Mac 10.11.4 is not supported

• Animate using rotation and the puppet tool. Continuously rasterize mess it upward.

  In After Effects CC... Trying to animate a vector arms using rotation and the puppet tool. The animation looks good until I hit the button to rasterize continuously on this layer. He then gets distorted and cut out. I need to be continuously rasterized, so it's not pixelated.  Any suggestions on how to solve this would be great.

  In simple terms the effect of pupet pin uses space Composition and an alpha chanel of the first image to distort the pixels on the screen. So if you move or change the position or scale of the pixels after the first image to the assistance of any transformation or the effect, you now moved the original source of the pixels and puppets pin breaks. That's how the effect is designed and it's the only way it works.

  There is only a single correct workflow. Set up a model that is large enough to include all of the image that you want to animate when played back on the scale of 100% or a distance from the unit corresponding to the value of the camera zoom, if you size your layer of pine puppets if used in a comp. 3D IOW exceeds 100 percent in the final model, your computer is not big enough , or in a 3D model, if you want to move the camera at 1/4 the distance of the Zoom value of the camera to the layer of puppet pin your model of puppet PIN must be 4 times bigger.

  Animate the effect of pin puppet

  Bring the composition of spindle of puppets in yoiur main composition and apply other effects, transformations or any other manipulation, you need to perform to achieve your desired results.

  Puppet PIN is designed for this workflow and when used properly it is a very practical tool.

• The mouse wheel will only up to?  Bridge (Photoshop CS4)

  I am facing a problem with Bridge (CS4) where the mouse wheel scrolls only upward.   Any attempt to scroll down causing the erratic behavior.   If you scroll at a normal speed, it always returns to the top.  If you rotate the mouse toward the low fast roulette, bridge is going through some then go up a little.   No problem in any other product such as Photoshop CS4 Adobe.

  Has anyone reproduces this behavior?

  Any solution?

  NOTE: WACOM Tablet mouse works correctly.

  Kind regards

  Valerie

  I had the same problem until I downloaded the 64 bit Windows 7 drivers of

  http://www.Microsoft.com/hardware/download/download.aspx?category=MK&type=mouse&SKU=QVA-00 001

  .

  Pablo

• Why open the cover on my iPad Air is more directly shows the PIN code screen

  Hello

  After installing iOS 10, when I opened my iPad original air cover (with magnet) I suddenly need to do something extra to access the unlock PIN code screen. I used to be able to enter my PIN to unlock immediately.

  It's really annoying, that I almost never use the home button on my iPad, simply open the lid is allowed to enter the PIN to unlock and start to use the iPad. Now, I have to first press the home button, it means an additional gesture.

  Y at - it an option to go back to the old behavior again? I really don't like it.

  Kind regards

  Iskander

  Hello

  Some things have moved go in display & its right brightness settings

  The screen lock / unlock.

  See you soon

  Brian

• I forgot the pin, ipad disabled

  I need to reset my ipad and the officeial guide does not work: If you have forgotten the password for your iPad, iPhone or iPod touch, or your device is disabled - Apple supports

  I can do just the 3rd option "erase your device with the recovery mode. When I follow the steps after restarting iTunes ipad wonder if I want to allow access to the ipad data. When I select Yes, ipad requires the PIN. When I select No, nothing happens, ipad does not connect to ituons.

  How to solve this problem?

  Thank you

  Hello

  You need to contact iforgot.apple.com

  See you soon

  Brian

• iMac, boots on the desk and then immediately crashes on the color wheel

  Thanks for taking a peek at my question.

  When I boot my iMac, everything starts up fine in the beginning - he's going right on the desktop, the mouse moves around and, if I'm quick, I can even click on 1 maybe 2 things until the computer completely locks the spinning wheel of death color.  I can still move the wheel on the screen with no latency, but I can't do anything in fact.  Typing on the keyboard does nothing, although the caps lock key will light up.  Boot in safe mode produces exactly the same results, except that it asks me to log in first.

  Something must be start I need to get rid of, although I not much to install on this computer and rarely changes (it is a demo machine that lives in a small computer lab that I managed, off-grid). I never had any problems with it, then one day, this problem started.  Maybe I ran an update of the OS and that caused his crash?

  I am very familiar with troubleshooting a Windows computer, but Mac does not really offer many intuitive troubleshooting options, IMO.  This seems to be a fairly simple matter to reslolve, but my research online have not produced results - people seem to suggest the safe mode and command line solutions, but safe mode doesn't change anything and I can obviously not open a command line to type anything.

  The iMac was bought to 2010 and I'm 99% sure there Yosemite installed, but unfortunately I have no way to be able to check at the moment.

  Any help welcome, thanks!

  Start of recovery volume (command - R on a restart, or hold down the option/Alt during a restart and select the Volume of recovery). Run the check/repair disk utility and repair permissions until you get no error. Then re-install the operating system.

  OS X recovery

  OS X recovery (2)

• I have an Apple gift card account and want to use it, but I always get sent to my account where the payment is listed as a Visa card I have more. How can I change the billing to my gift card, I no longer the card and do not know the pin code

  How can I change my payment with a Visa card, I no longer use my gift card account. I don't have the gift card so I don't know the PIN code. I have the amount of the card on account, what should I do?

  Hi Nancy, there.

  Looks like you are trying to update your iTunes billing information, but he continues to ask you for a credit card security code, you have more. You may be able to change the option to zero rather than use the "Use your Mac or PC" section of this article:

  Modify or delete your Apple ID payment information

  If for some reason you can't, this article explains why this may be the case:

  If you don't see anything or can't select

  You may need to reach out to our iTunes support staff directly if you cannot get a resolution with these resources:

  the iTunes Store support

  Thank you for using communities of Apple Support.

• everyone sees the spinng wheel when they turn their phone off I'm not on my own

  iPhone screen 6 had repaired. When you switch the phone off normally see you a spinning wheel before he died, but on mine I have not extinguished. This could be due to a new update or be fixed

  Hello

  Don't worry about this. It is not necessary to see the small wheel before the iPhone turns off completely.

• By pressing the scroll wheel of the mouse does not open link in a new tab

  Since the upgrade to Version 38.0.1, this action no longer works. I can right-click and select a link to open it in a new tab, but pressing the mouse wheel is no longer works as a shortcut.

  Please correct or advise if there is a setting that I can shape to get this feature.

  Thank you.

  It is with the middle clicking a link on a web page or is not all click workplace?

  Is required to work Ctrl and left click to open the link in a new tab?

  Have you checked the settings in the mouse driver software to click on the scroll wheel?

• Rotation of the screen with Automator and a script

  I have no knowledge whatsoever about scripts, coding or automator. I continue to read discussions about the issue, but I don't understand them. It would be a great help for me if someone please explain how to create a kind of keyboard shortcut that changed the rotation of the screen (the own macbook screen, not an external) using automator and a script on a Macbook Air running OS X El Capitan 10.11.2.

  Is this possible?

  Thank you in advance.

  One option is to use the utility command line fb - turn in Automator service and assign a keyboard shortcut. Download the GitHub source fb-rotation, compilation, following the indications on GitHub and output the binary to usr; or download a binary compiled and move to usr/local/bin.

  Create an Automator service, set the options "Service receives no entry in any application", add an action to run the Shell Script and set the options as "Shell: / bin/bash ', ' Pass entry: to stdin.  Type the command rotation fb for the desired degree of orientation of the screen such as ' / usr/local/bin/fb-rotation - d 0 - r 180 ' 180 ° on the main screen. Register the service under a name.

  

  Go to  > System Preferences > keyboard > shortcuts > Services. Highlight the service you created, select it, click "none" and create a shortcut using a unique combination of keys. Create separate services of Automator for the additional screen orientations. Quit the system preferences when you are finished.

  

  Tested with OS X 10.10.5 Yosemite and El Capitan 10.11.3

• Why has my Automatic rotation of the ipad stopped when I pass the vertical horizontal screen remains in the vertical position?

  Why has my Automatic rotation of the ipad stopped when I pass the vertical horizontal screen remains in the vertical position?

  Not all applications are supported both orientations. If you experience of this with an app that should work, you know, you most likely locked up the switch of direction. Drag your finger from the bottom of the screen bezel to display Control Center. Tap on the lock with a circular arrow icon.

• Could not receive the PIN on cell phone. does not the text. can you send PIN on email or phone?

  I tried to update firefox for several weeks. I have a mobile phone but NOT text. Therefore, I can't receive the PIN that you send on the mobile phone. Hoped a voice message.
  How can I update firefox so I can't receive your PIN?

  Hello, firefox will never ask a PIN or something of the types of update/install/use - it is always available for free and without obstacles. This seems rather to be a scam of malware on your computer.

  Please reset firefox and run a full scan of your system with the security software you have in place and various other tools such as the free version of malwarebytes & adwcleaner.

  Remove a toolbar that has supported your Firefox or the homepage search
  Fix Firefox problems caused by malicious software

• I'm looking for something, or even click on a link "for you", that he - and nothing else than the spinning wheel.

  I'm looking for something, or even click on a link "for you", that he - and nothing else than the spinning wheel.

  It is easier to go to YouTube, which I prefer not to do.

  < published by host >

  It's real comments to your message:

  You talk to other users here, not to Apple directly.

  Click below and select the product (s) on which you have any concerns or suggestions:

  http://www.Apple.com/feedback/

  Then select your product

  When you contact Apple to give them feedback, note the statement at the top of this page:

  'Use the form below to send us your comments. We read all comments

  carefully, but please note that we cannot respond to comments you

  submit. »