Route of the different IP addresses

I have multiple IP addresses for a virtual server that is running Windows Server R2 2012 and I was wondering if anyone knew any software or all methods to deliver on a different IP address every time that I want. Thank you.

This issue is beyond the scope of this site and must be placed on Technet or MSDN

http://social.msdn.Microsoft.com/forums/en-us/home

Tags: Windows

Similar Questions

  • your ip address of the router and the printer's address must be the same, so it can print from the computer

    IM setting upward a new router and wants to find the printer but the printer and the router are different VPI address Will this work

    Are they similar addresses, for example 192.168.1.1 for the router and 192.168.1.37 for the printer, it should work file.  If they are more than just a bit different - say for example instead of 192.168.1.37 the printer address is 192.168.0.100 or 169.54.45.21 - then is not likely.  In most home networks, the first three bytes of the IP address must be the same with the fourth byte is different for each computer or device connected to the network.

  • Identify the computer IP addresses

    Hello world

    How to identify individual IP addresses of the computer and confirm my own? How to identify the geographical region/city of the different IP addresses?

    IP addresses seem to have 9 numbers - XX. XX. XX.XXX - Sign these individual computers / connection and country town?

    This is related to the identification of hackers in my e-mail address. I have a report of log on the activity that reveals different IP addresses - please answer the layman that I am a little IT not aware

    Really appreicate your support and your help with this! Thank you very much!

    Philippe

    Hi Philippe,.

    IP addresses have actually 12 numbers - xxx.xxx.xxx.xxx - but they tend to drop the zeros so it can sometimes fool you.  The following may help: http://en.wikipedia.org/wiki/IP_address and/or http://computer.howstuffworks.com/internet/basics/question549.htm.

    To confirm your address, click on start / all programs / accessories / right-click on command prompt, and then click Run as administrator.  Then type IPCONFIG/all and enter.   It will tell you your IP address and much more on your connections.  Remember, unless you use a static IP address to your ISP (usually very unlikely), so you have a dynamically assigned address, which means that it could be different every time you connect or remain the same over a certain period to the ISP of time but eventually change even in this case.  If the IP address of your ISP is something of a moving target and tying someone requires knowledge of the address and the time it has been used (and the cooperation of the ISP for this address to provide more details, which I imagine will be difficult to achieve without a court order or something like that).

    You can find information about the owner of an IP address (address may not be the specific but more probably the range of addresses that includes this specific address) using WHOIS.  Here is a place which provides that: http://tools.whois.net/whoisbyip/.  Here's another option: http://www.whois.sc/.  You can find other just Bing search and grabs 'whois' as a search term and you will have more than you can imagine.

    For geographically locating an IP address, do the following: http://www.geobytes.com/ipLocator.htm?GetLocation.  Here's another option: http://www.ip-adress.com/ip_tracer/.  Other alternatives, search for 'The IP address index' Bing and you'll still find plenty of options.

    If you have an email from pirates, you can optionally use the following to follow them: http://www.ip-adress.com/trace_email/.

    Once you know who owns the block of IP address or the address itself, you can then contact them to see if you can find a more about those specific you interest if you also have the exact dates and at the times that go with them--but I frankly don't think that they will provide you information without a court order.

    In addition, there are there programs that can be used to hide your IP address or send a false IP address and most of the pirates, using such programs, so even if you try to track it down, you can discover that they have covered their tracks with several false IP (sometimes several dozen) of their own IP address real than you see in the emails addresses and try to track down who is formidable , even for professionals.

    I recommend you visit the site next where the Government helps people who have been victims of computer-related crime: http://www.ic3.gov/complaint/default.aspx.

    I hope this helps or at least gives you a head start on your quest.  To be honest, the chances to really find these people without being a hacker yourself or hire a hacker are pretty slim, but you might get lucky and if you decide to report it or get help, the more information you can provide, more opportunities they have to do something.

    Good luck!

  • 4 devices using the same mac address in the ARP Table. Explanation

    Please tell me why four devices connected to the router shares the same mac address was shown on the arp table? I know this has to do with the firewall and owner of listening devices, but why all using the same mac address instead of him? I'm trying to understand this scenerio. Please advice.

    Internet 16x.1x.2x.1x - 0050.5486.5f60 ARPA Ethernet0/0

    Internet 16x.1x.2x.1x 1 0040.1017.2d64 ARPA Ethernet0/0

    Internet 16x.1x.2x.1x 11 0040.1017.2d64 ARPA Ethernet0/0

    Internet 16x.1x.2x.2x 216 0040.1017.2d64 ARPA Ethernet0/0

    Internet 16x.1x.2x.2x 88 0040.1017.2d64 ARPA Ethernet0/0

    Internet 16x.1x.2x.2x 166 0040.1017.2d64 ARPA Ethernet0/0

    No problem at all... I guess she gave us the opportunity to learn that a little on the proxy-ARP and the potential for problems, it can cause.

    Paresh

  • Internal untrusted clients directed to the external IP address for traffic PCoIP

    I have a network segment disable my firewall for some untrusted clients. When untrusted clients connect to view (5.3), they use a DNS name that resolves to a DMZ (view Security Server) host. That's where I think the problem is: it seems that security server responds with its external IP address, and then all the PCoIP traffic is routed to my router (where the external IP address can be found), then back into view and the customer. Traffic of SSL connection works fine, the traffic remains inside and does not get directed to the external IP address. It is only the PCoIP traffic that gets invited to use the external IP address.

    It seems that DNS is not enough - Security Server seems to respond and connect using only the external IP address configured in the external URL field PCoIP - is this correct? If so, then to do a substitution for the external URL so that internal untrusted traffic doesn't get routed the external IP address - this creates a lot of unnecessary traffic, mess with QoS, etc..

    Another idea would be to allow untrusted clients to connect directly to a login server instead of sending them on the Security Server, but I don't think that it is a best practice...?

    Mike

    As Linjo says the simplest solution is to set up a server for additional security to point these clients (no need of another server connection, you can pair it with the existing one). Today, you are required to provide an IP address for PSG, so if you need to send it to another, you will need a second server.

    Of course, if they are completely not reliable customers, then you can force through the external access point still but looks like you need avoid the cost of additional traffic from this approach.

    Mike

  • HP Officejet Pro 8610: Try to install the full software concludes printer, but the IP address is the address of the router, not the printer

    I tried several times to remove printer, uninstall the drivers, reboot, reset the printer to the factory, etc. without success.  I even went into the registry and deleted the printer reference as much as I could.

    Please note I know how to connect the wireless printer and did successfully to the router with IP 192.168.1.108.   The problem is that the installer will search for a printer on the network and detects the 8610, but it appears with the IP address 192.168.1.1, which, of course, fails to install correctly.

    How can I get the dialog box to see the printer with the CORRECT IP ADDRESS?

    Well, I gave up trying to connect wireless and connected the printer with an ethernet cable.    Re-installed software that went much smoother, but still showed printer with IP router when you try to add it.   I chose "other devices" and is manually entered IP ethernet.

    Everything works now, including scanning.

    I think that the new router (for satellite internet) blocking a port that is required to complete the driver installation.   I had to add a switch to have an additional ethernet port to connect the printer.

    It was NOT a good experience.   I had a lot of practice of deleting, downloading, installation, configuration of the HP printer again and again well, therefore perhaps not all a lost cause.

  • Problems with different e-mail addresses and the different Apple ID

    Hi, I have some problems with the different Apple ID and e-mail addresses connected to them, and I hope someone can help me in what to do.

    First a primer on my Apple ID

    ***@me.com - it's my account General iCloud (backup, iMessage, Facetime etc.).

    ***@losmail.no - my iTunes/App account (purchase and download music, app, etc..)

    ***@me.com: I have no problem connecting to this account (appleid.apple.com, iCloud.com etc etc..)

    ***@losmail.no: I have no problem connecting to this account in iTunes/App Store. However, I can not connect on appleid.apple.com with this account because he asked me to check the email address. However, this e-mail address use a messaging service that doesn't work anymore, so I can't check it out. Because it is a private messaging service, I want to change the Apple ID on my account @gmail.com.

    I believe, however, that the account @gmail.com has been connected to the account @losmail.no because I received my shopping etc. of my account @losmail.no sent to ***@gmail.com. These recipes also "Apple ID: * @gmail.com. When I connect to the account, however, use ***@losmail.no. However, an I said, I want to log on by using ***@gmail.com.

    What is strange is that in iTunes / App Store, I can connect with ***@gmail.com. However, this is not the same account as ***@losmail.noand previous purchases / comments etc. are not available. It's strange because said revenues (Ref. above).

    An other ting that indicates that the Apple ID where I use ***@losmail.no once was connected to ***@gmail.com, is what happens when I try to log in to ***@gmail.com to appleid.apple.com. Then, I get a message saying that the e-mail address must be verified. I can write the code sent to the ***@gmaiI.com, but it is said then that this e-mail address is already is used by another Apple ID, so it cannot be verified.

    So I guess my question is, basically, how I can change the ID of the ***@losmail.no to ***@gmail.com Apple when I can't access the account losmail, but the appleid.apple.com tells me that I need to check this email address.

    Best regards

    Philippe

    Hi phillla,

    Thanks for all the details with your accounts.

    Can be difficult to have more than one Apple with several e-mails all mixed together.  If an email is used with another Apple ID, for example, that e-mail can be used to create a new Apple ID or rename an old.

    The analysis of what you seem to have however...

    Your purchases are with your *@losmail.no Apple ID, but the emails for this go to your *@gmail.com email address.

    *@gmail.com is the primary e-mail address for your Apple ID *@losmail.no.

    You can connect to iTunes or manage your page ID with *@gmail.com Apple says it's an Apple ID on its own.  As an email address can only be verified for an Apple ID, which means that he must check with your *@losmail.no Apple ID and cannot be verified with *@gmail.com.

    You say you can not connect on appleid.apple.com with *@losmail.no you will need to check the email address.  You have a relief attached to this ID e-mail? This is the email that would be used to recover.   You receive your check or reset email - Apple Support

    Bottom line, you want to change your primary Apple ID but outdated to *@losmail.no to *@gmail.com, you must first rename *@gmail.com to something else and delete this email of all codes from Apple as well.  Then follow the link above to get access to *@losmail.no and control so that you can rename it.

    Best regards.

  • text messages sent with an email address from a touch ipod duplicated on a second ipod touch using a different email address, but the two ipods are controlled by a parent with the same apple ID and password.

    Text messages sent with an email address from a touch ipod duplicated on a second ipod touch using a different email address, but the two ipods are controlled by a parent with the same apple ID and password.  This has happened recently.  My two girls have used their respective ipods and texting, without their messages of duplication for each of the other ipods for more than a year.  Somehow recently, both addresses seem to be synced with them or something, so that both see each and other messages.  I've recently updated two ipods, iTunes on my computer--not the cloud and added music for two ipods, but has not changed anything by email email settings or message I know.  Help, please!

    Welcome to the Apple community.

    I can't fully follow how you have everything set up, but a glance at the settings > messages > send & receive

  • I am trying to install a D-Link router, but it will not designate the correct IP address.

    Im trying to install a d-link router and it will not get the correct ip address. I then tested on my roommates with a newer version of windows laptop and the router has worked. d-link technology says I may new new setting lan drivers installed for this problem. help someone?

    original title: router problems

    Make sure that this adapter you set obtain IP and DNS addresses automatically.  Go to your network connections and right click on your internet connection and select 'Properties', then click on (highlighted) Protocol Internet (TCP/IP) and then click on the properties button and make sure that the IP address and DNS are both set to obtain automatically addresses.

    Go to the Services management console (type services.msc in the box run from the start menu) and make sure that the DHCP Client service is set to automatic startup.  Restart the computer and see if things improve.

    John

  • Microsoft Outlook is not compatible with my email. How can I change this to a different email address. It opens and gives me the email that it is not compatible.

    Microsoft Outlook is not compatible with my email.  How can I change this to a different email address.  It opens and gives me the email that it is not compatible.

    I need to put up with my hotmail account.

    Hi CarolBehrendt,

    • What e-mail program other than Microsoft outlook use?

    You must validate your application in the Windows Live community to know how to configure the hotmail account in the e-mail program you want to use.

    http://www.windowslivehelp.com/

  • Problem with website security cerificates. Said the security certificate presented by this website was issued for a different website address.

    Problem began the week last with Verizon's Yahoo email. I can't access it. I get the message on the certificate.  Said the security certificate presented by this website was issued for a different website address.  can hnts in and out of yahoo, but can not get by e-mail. I have Windows vista 32-bit home. Have tried several things offered by yahoo... Delete history, cookies, defragment the drive hard, etc. Then they said need to ask Verizon. Community sitting there, no response. I had a help line, but what they had me try did not work. Could not do the download help remotely, I tried Java plugin download, has got an error 12031, and a Microsoft fix it but none of it worked. Could not load. Then they said it was having problems with Microsoft windows problems. Error files, corrupted files and certificate & register...  I did a few other things too but do not know if someone can help me... Not even if I am in the right place.  I really hope that someone can help you.

    Hi Patsabo,

    I suggest you to check if you are facing the same question in the new administrator account.

    Create a new user account-
    http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

    If you are not faced with the same question in a new user account, you can view the link below and use the steps provided to fix a corrupted - user profile
    http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

    Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

  • Configure the router WRT54G with the PUBLIC IP address and use the DHCP protocol for internal computers

    Hello

    I have a service online Internet with 5 public IP addresses.

    The router and the AP are connected to a switch.

    I would like to set up a WRT54G Router with a public IP address and use DHCP (with private ip address) for the computers that will connect to the AP.

    That the AP is connected to the switch, it is possible that the other wired computers that are connected to the same switch can get an IP from the DHCP?

    Thanks in advance

    In this case, the routing is automatic.

    WRT54G configuration:

    WAN:

    Internet connection: static IP address

    IP address: 180.X. X 170

    Subnet mask: 255.255.255.248

    Gateway: 180.x.x.x (Ex: 180.x.x.1)

    DNS: servers your ISP DNS

    LAN:

    The IP address of the router: 10.10.10.1

    DHCP range: 10.10.10.100 of-online 10.10.10.200

  • Bind the MAC to the static IP address with WRT54GL router

    Hello

    We use the WRT54GL Wireless router to connect 4 pc to internet. One of these pc requires a static IP address, because the router can do only reliable port-forwarding for IP static (I would ssh it and use it as a web server). I was told that this router has this ability, but for the life of me I can't find.

    Could someone tell me how to proceed? I am running the latest firmware (v4.30.11).

    Thanks in advance for your reply,

    Michiel

    DD - WRT is fairly stable and well maintained. There are a lot of people using it and you get excellent support, if you don't mind not very technical responses to opportunities. Generally, the flashing of the firmware does not support the warranty. But that wouldn't be a problem if you have had a bad flash. And even for a bad flash you often have options to recover the router.

    For the static IP address on the computer, change the settings of network to the ethernet interface. I do not know Gentoo you should have administration GUI for this somewhere.

    You can use the following values:

    IP (as mentioned earlier) for instance 192.168.1.10
    subnet mask 255.255.255.0
    address of the gateway 192.168.1.1
    192.168.1.1 DNS server

    As long as the static IP addresses do not conflict with the DHCP server address pool create there will be problems running some static IP computers in the same local network with DHCP clients.

  • BlackBerry Z3 can I create a Blackberry ID using the same email address, but with a different password?

    I use 2 phones and I am ready to create a new blackberry on the 2nd ID, but it requires an email address and I don't have that one email address that I use for everything. I want to know if it is possible to create a new BBID with the same e-mail address but different password. The main thing is I want both phones to be active and fully functional, but I don't have a single address email and I prefer not to create another email address, because I love all of my emails in one place rather then having 2 email addresses. I don't want any phone be disabled. I do not fear one of the BBM is turned off, as long as at least one works. Both phones are a Blackberry Curve 9320 and a Blackberry z10, which is one waiting to be activated.

    No this is not possible. The BBID, you use is associated with the device, you are using, the e-mail address is the user and cannot be associated with two BlackBerry smartphones to consider it time of the password.

    I suggest that you create a new e-mail address for the sole purpose of using it as a BlackBerry ID.

    www.bbid.com

  • BlackBerry Z10 can I create a Blackberry ID using the same email address, but with a different password?

    I use 2 phones and I am ready to create a new blackberry on the 2nd ID, but it requires an email address and I don't have that one email address that I use for everything. I want to know if it is possible to create a new BBID with the same e-mail address but different password. The main thing is I want both phones to be active and fully functional, but I don't have a single address email and I prefer not to create another email address, because I love all of my emails in one place rather then having 2 email addresses. I don't want any phone be disabled. I do not fear one of the BBM is turned off, as long as at least one works. Both phones are a Blackberry Curve 9320 and a Blackberry z10, which is one waiting to be activated.

    No this is not possible, the e-mail address you used your BBID, is associated with the device that you use it on. It is also the BBID username. And cannot be used on another device, no matter that there is a different password.

    I suggest that you create a new e-mail account, just for the sole purpose of using it as a BBID.

    www.bbid.com

Maybe you are looking for