Router access log
I wonder if there is a way to connect all users access to the router that indicates the user account and exploitation forest timestamp.
I've implemented orders of logging config via a server Syslog in the following way:
devices > activate
device #conf t
device (config) #logging X.X.X.X (IP address of the Syslog server)
device (config) #archive
config (config-Archives) peripheral #log
Device(config-Archive-log-config) #.
Enable logging
the size of the logging Device(config-Archive-log-config) # 200
Device(config-Archive-log-config) # notify syslog
However, it records only orders entered in configuration mode. I need moniter user access for the purposes of verification. I heard that this can be done using AAA server but I'm not sure. Any help to offer?
Thank you
Let look at a single line:
Fri Sep 24 13:46:43 2008 10.1.1.1 cciesec tty3 192.168.15.9 stop task_id = 25 time zone = UTC service = shell start_time = 1222278403 priv-lvl = 1 cmd = show ip interface brief
13:46:43 on 24 September 2008, the user "cciesec".
connected to the vty host 3 192.168.15.9 to
Router Cisco 10.1.1.1 and made it
command 'show ip interface brief '.
I'm not familiar with GANYMEDE + running
Windows platforms. I run GANYMEDE + Linux
and Solaris platforms.
Tags: Cisco Security
Similar Questions
-
I try to print from my laptop on my Epson printer. It will not work on any of the documents or the internet. The Epson prints what follows: a conflict of channel router/access point - improve your wireless network environment, has been detected. My router is sitting next to my printer and the laptop. The Green WiFi light on the front of the printer is on. I have no problem using my Ipad in the other room. So does mean printing?
It's that all the documents, both new & saved and the same Wordpad?
Maybe
http://support.Epson.ru/products/manuals/102044/Panel/g_html/external/manual_e01.htm
-
The wireless router access denied
Simple question, I'm sure.
Router / access wireless, everything works perfectly. I can't just now to manage the device.
Can Ping but cannot access the GUI front-end server to administer.
Any Pc / computer laptop XP, Win7, Win8 returns:...
This page cannot be displayed- Make sure that the web address https://192.168.0.1 is correct.
- Navigate to the page with your search engine.
- Refresh the page in a few minutes.
- Make sure that the SSL and TLS protocols are enabled. Go to tools > Internet Options > advanced > settings > Security
Have checked this and'm sure that's not the issue.
Hi Gavin,
1. you are trying to access router webpage wired or wireless?
2. What is the brand and model of the router?I suggest you try the steps from the following link:
Set up a wireless router (the router setting)
http://Windows.Microsoft.com/en-in/Windows/set-up-wireless-router#set-up-wireless-router=Windows-8
Note: You can try to access the Web page of the router by connecting the wired router. If you still can not access the router's Web page, then you can do a hard reset of the router by taking a small pin and do hard reset. When you hard reset you will lose all the settings of the router and you will need to re - configure the router.
If you are not aware of the configuration of the router, then I suggest you to contact the manufacturer of your router.
Come back and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.
-
Dear.
I use ebs 12.1.3 and db 11.2.0.3 OS OUL5x64
in one applTier, I could see the ip address of the clients when they connect to the system in the access_log but
with the average level has 2 servers AP1/AP2 configure with a LoadBalancer in front.
verifying the connection in the Apache log file (access_log.1410393600) we see that the balancer IP address of load.
Please let know us if he died to set up so that I can see in file access_log which client (Ip address) connected to Server (AP1 or AP2)
Thanks in advance.
Concerning
Please see (how to show the Client IP address in The Access Log when using A load balancer (Doc ID 1355549.1)).
Thank you
Hussein
-
Cumtomising newspaper in Access.log
Hi guys,.
I use SOA 10.1.3.4, who crushed the Oracle Application Server10g.
I have a requirement where I need to increase the journal in the Access.log for response from the application server timestamp. By default, access.log has information (timestamp) only the customer's demands.
Please help me with your point of view, if there is a Posibility to customize the Access.log for response time.
Thank you
Sam
Edited by: user9358718 09/10/2010 03:46
Edited by: user9358718 09/10/2010 21:18You can customize the log format in Apache/httpd.conf. Search for "LogFormat" directive.
Check
http://httpd.Apache.org/docs/current/logs.htmlfor different elements during formatting!
-Sridhar
-
If I want to disable http logging server access, can I just comment on the entry below logging in the httpd.conf file and logging will be so off?
CustomLog "| / orainfra/app/product/oraforms10g/Apache/Apache/bin/rotatelogs/orainfra/app/product/orafo
rms10g/Apache/Apache/logs/access_log 43200 "common
and I hv to comment on these below entries as well?
"LogFormat '%%u %t \"%r\ hour' % > s \"%{Referer}i\ %b" \"%{User-Agent}i\" "handset"
"LogFormat '%%u %t \"%r\ hour' % > s %b "commune
LogFormat "% {Referer} i-> %U" referer
LogFormat "% {User-agent} I" agent
My http server goes down for any reason, as I do, because it is not able to write newspapers or something?Yes if you want to disable access record completely and then comment the CustomLog directive. Commenting out will not cause any trouble to your OHS. It's just that there is not any newspaper application / server access.
No, you don't have to comment LogFormat directives. You can those leave as what. LogFormat directive is used to give a name to a format of the access log. It causes no messages get logged. You use the format of log access defined in the CustomLog directive.
My http server goes down for any reason, as I do, because it is not able to write newspapers or something?
Commenting on the CustomLog directive is just disable access not recording error logging. Then you should be fine. The errors will still be logged in the error log file (directive ErrorLog) defined.
Thank you
Shail -
EA6300 - loss of router access on 80 mhz
Made me a new EA6300 the other day. Today, I bought the adapter usb AC 580 so I could run the 5 GHz in ac mode.
Seeking the optimal speed because this computer is used to stream video and audio, I set the channel width to 80 mhz and the left channel on auto.
When I applied the changes, it worked for maybe a minute and then I lost access to the router so I had to conenct to the 2 .4GHz to log into the router. I tried a few more times and every time I have I applied it, I'll lose access to the router and have to go back on the ssid of 2.4 ghz to log on. When I apply the changes, it would also just get hung up and get stuck on the small balls in circles screen that shows you that it is something.
I messed with it for almost 2 hours and finally gave up and he came back to mixed mode.
The 'problem' is when I'm in mixed mode, I don't get faster speeds using the ac580 I was using just a 53 - usb N adapt, so now think asus I just lost the $60.00 buy the adapter ac580.
Any suggestion is appreciated.
Oh, when I plugged the router just a couple of days, it was updating the firmware automatically I think.
I apologize, I was impatient and nobody responded to this tyhread so I asked it sort of differentlt in another thread.
It makes no sense to me, but the problem was security. It was the wpa2/mixed and worked very well if the width is set to auto.
After trying everything, I went there to just personal wpa2 and voila, I'm logged in and it works fine.
Not sure why it would not work on auto with it wpa2/mixed but not 80 mhz, but it works now.
So obviously, if everyone was never a problem, it would be the 1st thing I'd like to try.
On the flank in a way - I never really thought it through but it is very, very fast, that if I'm streaming video from the hopper of the dish, there is none more quickly due to the limitations of the hopper - Streaming video online I get between 8000-8500 kps with 2.4 ghz or the 5 ghz range. Tho advantage will be the computer that would be streaming the video will be the only computer on the 5 GHz now as no one else has an AC adapter / CC. I wanted it as soon as possible because I will be using this to stream movies outdoors on the projector, etc, so I really didn't have any stuttering etc. If a group of people is more than a movie, the game etc...
in any case, the security setting and the work very well now changed.
Thanks for your help tho, it is much appreciated.
-
Router Access List - where it is applied?
I seem to be missing something here. I have a 1841 router that has an access list configured and it actually loses packages based on this access list. I can't for the life of me see where this Access List is applied. Can anyone provide an overview? Here is the result of the "Show Run":
R - H1BR1 #sh run
Building configuration...Current configuration: 3391 bytes
!
! No change since the last restart configuration
!
version 12.4
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
R-H1BR1 host name
!
boot-start-marker
boot-end-marker
!
County of logging
logging buffered 51200
no console logging
!
No aaa new-model
IP cef
!
!
!
!
no ip domain search
domain IP p911.positron name - psap.com
name of the IP-server 10.4.0.1
name of the IP-server 10.4.0.2
name of the IP-server 10.5.0.3
name of the IP-server 10.5.0.4
IP multicast routing
Authenticated MultiLink bundle-name Panel
!
!
username * secret privilege 15 5 *.
Archives
The config log
hidekeys
!
!
TFTP IP source interface FastEthernet0/0.1
!
!
!
interface Tunnel5
Description * TUNNEL to NODE B (Multicast only) *.
IP 10.250.4.1 255.255.255.252
IP pim-interval between queries 1
origination-State pim IP 4 refresh rate
PIM dense mode IP
IP tcp adjust-mss 1436
KeepAlive 1 6
tunnel source 10.4.15.254
tunnel destination 10.5.15.254
!
interface Tunnel25
Description * TUNNEL at 25 SATELLITE (Multicast only) *.
IP 10.250.25.1 255.255.255.252
IP pim-interval between queries 1
origination-State pim IP 4 refresh rate
PIM dense mode IP
IP tcp adjust-mss 1436
KeepAlive 1 6
tunnel source 10.4.15.254
tunnel destination 10.25.15.254
!
interface FastEthernet0/0
Description * to switch 1 last Port *.
no ip address
Speed 100
full-duplex
KeepAlive 1
!
interface FastEthernet0/0.1
Description * BACKROOM LAN *.
encapsulation dot1Q 1 native
IP 10.4.15.253 255.255.240.0
neighbor-filter IP pim DENY
IP pim dr-priority 255
IP pim-interval between queries 1
origination-State pim IP 4 refresh rate
PIM dense mode IP
no ip mroute-cache
KeepAlive 1
45 minimum waiting time charge 60
Watch 1 ip 10.4.15.254
1 1 3 sleep timers
1 standby preempt delay minimum charge 15 15 15 sync
!
interface FastEthernet0/1
Description * BETWEEN R1 and R2 *.
IP 10.252.204.1 255.255.255.252
no ip proxy-arp
IP-range of greeting 1 2604 eigrp
IP - eigrp 2604 2 hold time
no ip mroute-cache
Speed 100
full-duplex
KeepAlive 1
!
interface FastEthernet0/0/0
Description * WAN to H2 connection *.
IP 172.16.215.246 255.255.255.0
Speed 100
full-duplex
KeepAlive 1
!
interface FastEthernet0/0/1
Description * connection to AAU *.
IP 192.168.10.1 255.255.255.0
Speed 100
full-duplex
KeepAlive 1
45 minimum waiting time charge 60
Watch 3 ip 192.168.10.3
sleep timers 3 1 3
3 standby preempt delay minimum charge 15 15 15 sync
!
Router eigrp 2604
redistribute static
passive-interface FastEthernet0/0.1
passive-interface FastEthernet0/0/1
10.4.0.0 network 0.0.15.255
Network 10.252.0.0 0.0.255.255
network 172.16.215.0 0.0.0.255
No Auto-resume
!
IP forward-Protocol ND
IP route 10.119.138.0 255.255.254.0 192.168.10.13
IP route 10.121.1.0 255.255.255.0 192.168.10.13
!
!
no ip address of the http server
IP mroute 10.5.0.0 Tunnel5 255.255.240.0
IP mroute 10.25.0.0 255.255.240.0 Tunnel25
!
standard IP DENY access list
deny all
!
interface FastEthernet0/0.1 source journaling
logging server-arp
record 10.4.0.1
!
!
control plan
!
!
Line con 0
local connection
line to 0
line vty 0 4
exec-timeout 0 0
local connection
transport telnet entry
line vty 5 15
exec-timeout 0 0
opening of session
transport telnet entry
!
Scheduler allocate 20000 1000
NTP-period clock 17177530
NTP 10.4.0.1 Server
endR H1BR1 #.
I guess you are looking for
interface FastEthernet0/0.1
Description * BACKROOM LAN *.
encapsulation dot1Q 1 native
IP 10.4.15.253 255.255.240.0
neighbor-filter IP pim DENY?
Best regards
Milan
-
Impossible EA4500 to router access
Hi all
I just bought the EA4500 router and through the installation without any problem. The only problem is that I can't access the router, locally or via the dashboard smart Wifi. Whenever I go to the page with "Access router", enter the password and the clikc the 'submit' button, it does nothing... no incorrect password don't ask or idle invites... almost like the page is somehow broken. I have all the habit done reboot the router, restart the PC, restart the cable modem, etc. and always have the same result. Anyone else see this issue? It's quite annoying not being able to access the router...
Thank you
Chris
I'll take a shot at it. I think that your web browser must be enabled to accept cookies. In addition, perhaps linked java? It's just a guess. If this does not solve it... then I'm out of ideas.
-
Here is the prob:
We just got cable internet the other day and the cable operator insisted on using their v1000 Belkin F5D7234-4 instead of my WRT54G V8. So I thought I'd use the WRT54G as a second router/AP (without wireless/LAN/WAN). I was eager to do this by running an ethernet in the WAN on the WRT54G port and plug it into the port of the client on the Belkin, place the wrt - 54 G at the other end of the House and have the WRT54G broadcasting the same SSID and require authentication even as the Belkin and use the Belkin to Linksys Wireless Bridge. In this way, it will extend my wireless network and all computers can access the internet and the other (wireline customers will keep at wire-speed, wireless is not authicate to two different networks.)
I can't get the Linksys network based able to see all the other computers outside the WRT - 54 G, even for wireless clients. On the side of things Belkin network, I can't ping the router even if she pulls a DHCP in the Belkin address. All customers the Belkin side can meet and thin internet. I've fiddled with the WRT54-g for almost an entire weekend now with no result. The WRT54G can see the other router as a DNS as well as external DNS providers, but none of the client computers can. Basically, I'm wanting to extend the network of Belkin 4 as most cable customers and fill a few dead wireless, and make the visible computer on the same network of suggestions?
Parameters of WRT - 54G:
Automatic configuration - DHCP
Same domain name like Belkin
IP router set a tire to the DHCP serverDHCPserver OFF
Mode of operation: router
Safe are disabled.
Wireless SSID is the same as Belkin
Wireless channel is the same as belkin.
Method and auth. key is the same as belkin.
Belkin:
DHCP is on.
15 IP addresses available.
Wireless gateway is on with the WRT54G Wireless MAC address information.
Ethernet cords are connected.
I played with static routes for hours, tried the option routing dynamic, even tried DMZing of the WRT54G intellectual property in the belkin and still unable to connect to the internet. Tried the Belkin MAC address cloning. Nothing seems to work. When I plug the WRT - 54G directly in my digital/Modem/phone cable box, I get internet and everything. I'm at the point of throwing same DD - WRT on it.
But beyond connection "wireless" I discovered really does not work if well (drops random wireless speeds seize up) with two different pieces of equipment running two different firmwares. So the thing connecting wireless set was out the window.
I however knew what I had to do Linksys firmware:
1.) DHCP clients forward.
Customers of Belkin - network
Linksys customers - network B
The dhcp pool was not get transferred to the client computers. That is the 1-2 on network computer had XXX. XXX.100 - 102 for 3-4 computers on network B was YYY. YYY. YYY statically set by Windows. Even after changing to a static address on the network A dhcp scope I could still connect to the internet or to one of the computers on the network.
The static routing table seemed not lead me anywhere either, and I've tried dozens of configurations.
The way I got it Setup is with the customer enthernet of the Belkin ROUTER to THE Internet on the Linksys WRT54G port 1-4. Maybe I should have plugged the ethernet on the client side of 4 ports Linksys?
Anyway DD - WRT redirect DCHP feature was what I need.
Regarding the scenario wireless two routers have the same encryption method and key but different channels and ssid. Who, with DD - WRT for some reason when I jump on the wireless-B, Vista will be ID it as network A (B).
I hope that it has not violated anything except the guarantee which was anyway. The reason for which I needed for my network up this way is because I do a lot of work using VM (of various operating systems), is simply easier to have two separate semi networks. (to different physical locations in the House)
-
I know that newspapers windows continues every time that an account is used but where are? Someone in my house has my password and know when this person logged in to my account would help me to determine that.
Hi amolchan001,
The event viewer will give you a fair idea on which the user logged on to the computer.
Open event viewer > select windows Logs > click eventis Security> you can determine the user account that was logged.
Security-related events:-these events are called audits and are described as successful or failed, depending on the event, as if a user tries to open a Windows session succeeded.
Open event viewer
http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
What are the information in event logs? (Event Viewer)
http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer
For more information, see the link below
Monitor attempts to access and change settings on your computer
Hope this information is helpful
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
BlackBerry 10 recover deleted number of call (peripheral access Log) log
Does anyone know a way to recover a number of delete call logs screen? My phone was not backup up until I deleted the number in order to restore the device is not an option.
On older Blackberry, the newspaper of the device has been activated now ALT + LGLG. Is there a way to access the Journal of 10 Blackberry device?
Hey Cre8tive,.
Welcome to the community of BlackBerry Support Forums.
Thanks for the question.
If the Z10 BlackBerry was not saved before deletion, then you will not be able to retrieve the deleted number.
Let me know if you have any other questions.
See you soon.
-
Cisco router access outside the local network interface
Hi all!
I have Cisco router 892 (c890-universalk9 - mz.154 - 3.M4.bin) with firewall area and based on routing strategies.
Everything works fine, but now I need to have the ability to access external router interface IP LAN addresses.
For example, I PAT 192.168.4.1 port 8443 to the outside interface IP (93.93.93.2 for example) and I need to check LAN 93.93.93.2:8443.
! PAT:
IP nat inside source static tcp 192.168.4.1 8443 93.93.93.1 - extensible 8443 SDM_RMAP_1 road map
! DynNat to the internet:
IP nat inside source overload map route SDM_RMAP_1 interface GigabitEthernet0
! Routing policy
SDM_RMAP_1 allowed 10 route map
corresponds to the IP 101
match interface GigabitEthernet0! ACL 101 for routing policy
access-list 101 deny ip 192.168.3.0 0.0.0.255 192.168.111.0 0.0.0.255
access-list 101 deny ip 192.168.3.0 0.0.0.255 172.16.192.0 0.0.0.255
access-list 101 deny ip 192.168.3.0 0.0.0.255 172.16.177.0 0.0.0.255
access-list 101 deny ip 192.168.3.0 0.0.0.255 172.16.61.0 0.0.0.255
access-list 101 deny ip 192.168.3.0 0.0.0.255 172.17.19.0 0.0.0.255
access-list 101 deny ip 192.168.4.0 0.0.0.255 192.168.111.0 0.0.0.255
access-list 101 deny ip 192.168.3.0 0.0.0.255 host 172.16.194.100
access-list 101 deny ip 192.168.3.0 0.0.0.255 10.0.0.0 0.255.255.255
access-list 101 deny ip 192.168.4.0 0.0.0.255 10.0.0.0 0.255.255.255
access-list 101 deny ip 192.168.4.0 0.0.0.255 host 172.31.255.1
access-list 101 deny ip 192.168.4.0 0.0.0.255 host 172.16.194.100
access-list 101 permit ip 192.168.3.0 0.0.0.255 any
access-list 101 permit ip 192.168.4.0 0.0.0.255 any! ACL on the external interface:
plug-in software component gi0 extended IP access list
allow an ip
allow icmp a whole! External interface
interface GigabitEthernet0
Description $ETH - WAN$
IP 93.93.93.1 255.255.255.240
IP access-group gi0-in in
NAT outside IP
IP virtual-reassembly in
EXTENT of the Member's area network security
IP tcp adjust-mss 1452
automatic duplex
automatic speed
card crypto SDM_CMAP_2! Inside DMZ interface vlan:
interface Vlan4
IP 192.168.4.254 255.255.255.0
IP nat inside
IP virtual-reassembly in
security of the members of the DMZ
IP tcp adjust-mss 1452! Allow outbound traffic to DMZ to Internet:
Allow_All_ACL-DMZ extended IP access list
allow an esp
permit tcp host 192.168.4.1 host 192.168.111.2 eq 1521
refuse the 192.168.4.0 ip 0.0.0.255 192.168.111.0 0.0.0.255
refuse the 192.168.4.0 ip 0.0.0.255 172.17.19.0 0.0.0.255
allow icmp 192.168.4.0 0.0.0.255 any
ip licensing 192.168.4.0 0.0.0.255 any! Allow incoming traffic from the Internet to DMZ:
WAN_DMZ_ACL extended IP access list
allow tcp any a Workbench
permit tcp any any eq ftp
permit tcp any any eq 990
permit tcp everything any 51000 53000 Beach
permit tcp any any eq 995
permit tcp any any eq 465
permit tcp any any eq www
permit any any eq 443 tcp
allow icmp a whole
allow an esp
permit any any eq non500-isakmp udp
host ip 212.98.162.139 permit 192.168.4.0 0.0.0.255
IP 81.30.80.0 allow 0.0.0.255 any
IP 192.168.111.0 allow 0.0.0.255 192.168.4.0 0.0.0.255
IP 172.17.19.0 allow 0.0.0.255 192.168.4.0 0.0.0.255
host ip 172.16.194.100 permit 192.168.4.0 0.0.0.255
host ip 172.31.255.1 permit 192.168.4.0 0.0.0.255
permit ip host 172.31.255.1 172.17.193.100
refuse an entire ip! Focus on the area of firewall:
type of class-card inspect entire game DMZ_WAN_CLASS
match the group-access name DMZ Allow_All_ACLtype of class-card inspect entire game WAN_DMZ_CLASS
match the name of group-access WAN_DMZ_ACLtype of policy-card inspect DMZ_WAN_POLICY
class type inspect DMZ_WAN_CLASS
inspect
class class by default
droptype of policy-card inspect WAN_DMZ_POLICY
class type inspect WAN_DMZ_CLASS
inspect
class class by default
dropthe DMZ security
area WAN securitySecurity WAN_DMZ of the pair area source destination WAN DMZ
type of service-strategy inspect WAN_DMZ_POLICY
destination of DMZ_WAN source DMZ area pair WAN security
type of service-strategy inspect DMZ_WAN_POLICYMaybe someone can help me to make Cisco to allow ports outside LAN using a NAT?
I did this on Mikrotik easily = |
It is due to the fact that they do not allow "hair pinning" by default, once this is configured, it will work.
Martin
-
1920 router access remote vpn LDAP living
Hello
What is required for a router in 1920 use AnyConnect and/or also integrate with AD LDAP?
Currently, this router supports legacy clients and has these licenses:
Technology for the Module package license information: "c1900".
-----------------------------------------------------------------
Technology-technology-package technology
Course Type next reboot
------------------------------------------------------------------
IPBase ipbasek9 ipbasek9 Permanent
Security securityk9 Permanent securityk9
given none none noneThe vpn to access remote client inherited integrate with AD LDAP?
Thank you.
As long as you are on IOS 15.3.3M3 or better, you have all the licenses you need for 3.1 AnyConnect run on your 1921.
The guide to directly connect your router to LDAP can be found here:
Personally, I would avoid directly interfacing with LDAP, because it can be a complex arrangement. While it can be done, it's easier to have your router to connect to the NPS Microsoft via RADIUS server for your authentication.
-
Hi all
where can I find the history of OBIEE 11 g access?
Yes, I know that I can use Administration-> manage Sessions, but as far as I can understand, it shows only public sessions.
What meetings months ago?Check this post OBIEE 11 g - log sessions
You can see the log where users holding loglevel = 2
Try to update your messages, allowing you to get answers
Hope this helps
Published by: Srini VIEREN on March 18, 2013 10:00
Maybe you are looking for
-
Google Chrome is no longer supported by my operating system. I need to update but do not know what I have to upgrade to. Here are my specs. Can someone tell me the best upgrade that will accept my Macbook? Current operating system OS X 10.6.8 MacBook
-
Clean install of windows 7 - How to install the USB drivers?
I bought a Toshiba Satellite C50 loaded with windows 8, but want to go back to windows 7. I downloaded the drivers needed and have mounted the .exe files on a USB pen for installation. Before proceeding to clean windows 8, I would like to know - if I
-
DVD RW drive does not recognize the DVD movie in Vista 64-bit
I installed a new graphics card and feeding a few months ago but I don't know when this problem began to arise. I can play games like Civ IV CD-ROM and Battlefield 2 PC - DVD discs and I can also play and burn CDs. But the DVD of movie I have both pl
-
My printer just does not work in safe mode. I have Windows vista.
My computer keeps closing, the blue screen of death coming up next, then it exports. I can not restore because cannot me whille in safe mode. I am trying to print some documents in safe mode, and it does not allow me. It is said that it does not r
-
Hello! I'm serious need help to understand what it is. An icon suddenly showed today that I turned on my computer. I was about to open a Photoshop file and I saw in my pictures folder, all the files I got this icon above them. I can't find any info o